Investigation of hydrogen addition to methanol-gasoline blends in an SI engine

In this study, effects of hydrogen-addition on the performance and emission characteristics of Methanol-Gasoline blends in a spark ignition (SI) engine were investigated. Experiments were conducted with a four-cylinder and four stroke spark ignition engine. Performance tests were performed via measuring brake thermal efficiency, brake specific fuel consumption, cylinder pressure and exhaust emissions (CO, CO₂, HC, NOx). These performance metrics were analyzed under three engine load conditions (no load, 50% and 100%) with a constant speed of 2000 rpm. Methanol was added to the gasoline up to 15% by volume (5%, 10% and 15%). Besides, hydrogen was added to methanol-gasoline mixtures up to 15% by volume (3%, 6%, 9% and 15%). Results of this study showed that methanol addition increases BSFC by 26% and decreases thermal efficiency by 10.5% compared to the gasoline. By adding hydrogen to the methanol - gasoline mixtures, the BSFC decreased by 4% and the thermal efficiency increased by 2% compared to the gasoline. Hydrogen addition to methanol – gasoline mixtures reduces exhaust emissions by about 16%, 75% and 15% of the mean average values of HC, CO and CO2 emissions, respectively. Lastly, ?t was concluded that hydrogen addition improves combustion process; CO and HC emissions reduce as a result of the leaning effect caused by the methanol addition; and CO2 and NOx emission increases because of the improved combustion.     

Emulsification of waste cooking oil biodiesel blend with hydrogen peroxide to assess tailpipe emissions and performance of a compression ignition engine

Hydrogen peroxide (H₂O₂) is an excellent oxidant carrier that finds its use in combustion and fuel applications. In the present study, H₂O₂ (30% assay) is used as an emulsifier in waste cooking oil biodiesel blend (B20) and the emissions and performance in a compression ignition engine are assessed. Along with the neat B20, three blends of B20 with 0.5%, 1%, and 1.5% H₂O₂ concentrations are used. Increasing the concentration of H₂O₂ beyond 1.5% resulted in vapor lock in the fuel pump leading to a loss in injection pressure. An increase in the exhaust gas temperature was recorded with the increase in H₂O₂ concentration due to improved fuel properties, like, cetane number, thermal conductivity, and microexplosions of fuel droplets. However, NO_x emissions decreased mainly due to the presence of the hydroperoxyl group from H₂O₂. Analysis of variance was also carried out to assess the statistical significance of H₂O₂ on the responses and is seen that the maximum impact of H₂O₂ was positively influencing brake thermal efficiency (BTE), brake-specific fuel consumption (BSFC), hydrocarbon (HC), and NO_x. Compared with the B20 blend, H₂O₂ emulsified fuel with a concentration of 1.5% showed a substantial reduction of 53.7%, 28.6%, 14.2%, and 16.2% in the average emissions of CO, HC, smoke, and NO_x, respectively. Similarly, 7.9% and 7.1% improvement in the BTE and BSFC is obtained. However, more studies are required to ascertain the NO_x reduction mechanism and address issues of fuel vaporization at higher concentrations of H₂O₂.     

双点火及补气对摩托车发动机性能影响的研究

针对摩托车发动机经济性差、排放高的问题,笔者在一台加装了双火花塞和进气补气系统的单缸摩托车发动机上,在不同转速条件下,就双火花塞点火和补气对内燃机燃烧与排放特性的影响进行了试验研究。试验结果表明,采用双点火配合进气补气的方法可以有效降低发动机CO、HC排放及比燃油消耗率。在转速为3500r.min-1的条件下,采用双点火配合进气补气的发动机比燃油消耗率较原机降低约12.5%。在发动机转速高于3000r.min-1时,采用双点火也可以在一定程度上改善发动机经济性并降低CO和HC排放。但NOx排放在双点火条件下较原机略有升高。     

Performance and emission analysis of compression ignition engine using biodiesels from Acid oil,Mahua oil,and Castor oil

Research on and use of biodiesels for engines is growing continuously in the present era. Compression ignition (CI) engine performance for biodiesels of blends B20 from Acid oil, Mahua oil, and Castor oil is experimentally investigated. The engine performance analysis in the form of brake‐specific fuel consumption, brake‐specific energy consumption, brake thermal efficiency (BTE), exhaust gas temperature (EGT), and air fuel ratio are compared with diesel as base fuel. Emission characteristics like CO, CO₂, NOx, and opacity are comparatively studied in detail for the considered biodiesels. The entire study is compared with the performance of engine when pure diesel is chosen as fuel. From the complete analysis it was observed that the BTE was higher for Acid oil and Mahua oil among the biodiesels used. And regarding CO emissions, Mahua oil showed lower effect than other biodiesels. Upto 6% increase in EGT of Mahua oil was obtained at no load and for other loads the percent reduced. For all the biodiesels the % enhancement in Co, CO₂, and NOx was more than 60% at highest load compared with diesel.     

Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine

A comparative analysis is being performed of the engine performance and exhaust emission on a gasoline and compressed natural gas (CNG) fueled retrofitted spark ignition car engine. A new 1.6 L, 4-cylinder petrol engine was converted to the computer incorporated bi-fuel system which operated with either gasoline or CNG using an electronically controlled solenoid actuated valve mechanism. The engine brake power, brake specific fuel consumption, brake thermal efficiency, exhaust gas temperature and exhaust emissions (unburnt hydrocarbon, carbon mono-oxide, oxygen and carbon dioxides) were measured over a range of speed variations at 50% and 80% throttle positions through a computer based data acquisition and control system. Comparative analysis of the experimental results showed 19.25% and 10.86% reduction in brake power and 15.96% and 14.68% reduction in brake specific fuel consumption (BSFC) at 50% and 80% throttle positions respectively while the engine was fueled with CNG compared to that with the gasoline. Whereas, the retrofitted engine produced 1.6% higher brake thermal efficiency and 24.21% higher exhaust gas temperature at 80% throttle had produced an average of 40.84% higher NO_x emission over the speed range of 1500–5500 rpm at 80% throttle. Other emission contents (unburnt HC, CO, O₂ and CO₂) were significantly lower than those of the gasoline emissions.     

Synergetic influence of hydrogen peroxide emulsification and MWCNT nanoparticles to reduce engine exhaust emissions using B20 biodiesel blend

In this study, the combined synergetic influence of H₂O₂ emulsification with the addition of multi-walled carbon nanotubes (MWCNT) to B20 biodiesel blend is ascertained on the exhaust emissions and performance of a compression ignition engine. Methyl ester obtained from waste cooking oil is used to prepare B20 blend. Variation in the concentrations of H₂O₂ (0.5%, 1%, 1.5%) and MWCNT (0, 20, 40 ppm) was carried out at 50%–100% of the full load condition. Increasing the concentrations of H₂O₂ and MWCNT positively affect the emissions of CO, HC, and Smoke, wherein a maximum reduction of 52%, 30.2%, and 16.1%, respectively, was achieved. Similarly, the average increase in brake thermal efficiency and an average reduction in brake specific fuel consumption is seen to be 10.3% and 9.1%, respectively. An increasing trend for NOx was seen with the increase in the MWCNT concentration (average increase by 10.2%). However, H₂O₂ emulsification resulted in an average decrease of 21.5%, indicating that H₂O₂ had a more dominating effect due to hydroperoxyl radicals. Fitting models between the controlling factors and the response of emissions and performance parameters were developed using an artificial neural network (ANN) (R² > 0.99). From studying the interaction of H₂O₂ and MWCNT using ANN-derived response surface plots, it is seen that H₂O₂ emulsification dominated the effect of MWCNT nanoparticles for the responses of CO, HC, Smoke, NOx, and BTE.     

Influence of advanced injection timing on the performance and emissions of CI engine fueled with ethanol‐blended diesel fuel

Ethanol has been considered as an alternative fuel for diesel engines. On the other hand, injection timing is a major parameter that sensitively affects the engine performance and emissions. Therefore, in this study, the influence of advanced injection timing on the engine performance and exhaust emissions of a single cylinder, naturally aspirated, four stroke, direct injection diesel engine has been experimentally investigated when using ethanol‐blended diesel fuel from 0 to 15% with an increment of 5%. The original injection timing of the engine is 27° crank angle (CA) before top dead center (BTDC). The tests were conducted at three different injection timings (27, 30 and 33° CA BTDC) for 30 Nm constant load at 1800 rpm. The experimental results showed that brake‐specific energy consumption (BSEC), brake‐specific fuel consumption (BSFC), NO_x and CO₂ emissions increased as brake‐thermal efficiency (BTE), smoke, CO and HC emissions decreased with increasing amount of ethanol in the fuel mixture. Comparing the results with those of original injection timing, NO_x emissions increased and smoke, HC and CO emissions decreased for all test fuels at the advanced injection timings. For BSEC, BSFC and BTE, advanced injection timings gave negative results for all test conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of hydrogen supplementation on engine performance and emissions

Vehicular Pollution and environmental degradation are on the rise with increasing vehicles and to stop this strict regulation have been put on vehicular emissions. Also, the depleting fossil fuels are of great concern for energy security. This has motivated the researchers to invest considerable resources in finding cleaner burning, sustainable and renewable fuels. However renewable fuels independently are not sufficient to deal with the problem at hand due to supply constraints. Hence, advanced combustion technologies such as homogeneous charge compression ignition (HCCI), low-temperature combustion (LTC), and dual fuel engines are extensively researched upon. In this context, this work investigates dual fuel mode combustion using a constant speed diesel engine, operated using hydrogen and diesel. The engine is operated at 25, 50 and 75% loads and substitution of diesel energy with hydrogen energy is done as 0, 5, 10 and 20%. The effect of hydrogen energy share (HES) enhancement on engine performance and emissions is investigated. In the tested range, slightly detrimental effect of HES on brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) is observed. Comparision of NO and NO₂ emissions is done to understand the non-thermal influence of H₂ on the NO_x emissions. Hence, HES is found beneficial in reducing harmful emissions at low and mid loads.     

Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer

Fusel oil produced in small quantities as a by-product obtained through the fermentation of some agricultural products. Thereby the possibility of using fusel oil to replace gasoline or blending at high percentage unavailing. The fusel oil has both high research and motor octane rating RON and MON (106 and 103). This paper examines the impact of using fusel oil as an octane enhancer for gasoline fuel on the performance, combustion and emissions of 4-cylinder spark ignition engine. The test was achieved at two ratios of fusel oil -gasoline blends and pure gasoline at different speeds and loads. The fusel oil is showed to be a novel and useful octane enhancer for gasoline blendstocks in a spark ignition engine. Furthermore, fusel oil is a suitable candidate fusel for octane enhancer on-demand applications and further experimentation in spark ignition engine warranted. The high octane number and oxygen content of fusel oil lead to improving the engine performance under high engine speed and rich mixture (? < 1) due to the complete combustion. The brake power and BTE enhanced with fusel oil compared to gasoline while BSFC increased. The NO_x emission decreased as the fusel oil used While the HC and CO₂ emissions increased.     

Effect of hydrogen and ethanol addition in cashew nut shell liquid biodiesel operated direct injection (DI) diesel engine

In this experimental research, the hydrogen gas at a different flow rate (4 lpm, 8 lpm, & 12 lpm) is introduced into the intake port of a diesel engine fueled with B20 (20% CNSL (Cashew nut shell liquid) + 80% diesel) biodiesel blend to find out the best H₂ flow rate. Then, ethanol-blended (5%, 10%, and 15% by volume) B20 blend along with the best H₂ flow rate are tested in the same engine to examine the engine performance. The experimental results showed that B20 with 8 lpm H₂ flow gives the maximum brake thermal efficiency and subsequently reduces the BSFC. Furthermore, by blending ethanol with the B20 blend, the BTE of the engine is improved further. The 10% ethanol blended B20 blend with 8 lpm hydrogen flow gives the maximum BTE of 37.9% higher than diesel whose values are 33.6% at full load. Also, this fuel combination led to the maximum reduced levels of CO and HC emissions with an increase in exhaust gas temperature and NOx emissions. From the results, the 10% ethanol blended B20 blend with 8 lpm H₂ flow dual-fuel configuration is recommended as an alternative to sole diesel fuel.     

稀燃及废气再循环提高增压汽油机热效率的对比研究

在一台直列4缸增压直喷汽油机上针对万有特性最低油耗工况点,进行了稀薄燃烧与废气再循环(exhaust gas recirculation,EGR)提高发动机热效率的对比试验研究。试验结果表明:稀薄燃烧及EGR均能有效降低发动机燃油消耗率,稀释率分别为33%和19%时,采用稀燃和EGR时的最高有效热效率绝对值分别增加2.8%和1.7%,其中稀燃的有效热效率达到了39.9%,稀燃实现更高热效率主要归因于较低的传热损失和未燃损失。从燃烧角度来看,稀燃及EGR稀释都延长了燃烧滞燃期及持续期,但同样稀释率下稀燃的滞燃期更短,稀燃更高的稀释极限实现了更低的传热损失;但EGR抑制爆震,提前燃烧相位,使采用EGR时的排气能量损失低于稀燃。从排放角度来看,稀燃及EGR在高稀释率下均显著降低NO_x排放,而受益于高氧气浓度,相同稀释率下稀燃的HC及CO排放均低于采用EGR时,从而使稀燃的未燃损失更低。     

Effects of hydrogenation of fossil fuels with hydrogen and hydroxy gas on performance and emissions of internal combustion engines

Energy security is an important consideration for development of future transport fuels. Among the all gaseous fuels hydrogen or hydroxy (HHO) gas is considered to be one of the clean alternative fuels. Hydrogen is very flammable gas and storing and transporting of hydrogen gas safely is very difficult. Today, vehicles using pure hydrogen as fuel require stations with compressed or liquefied hydrogen stocks at high pressures from hydrogen production centres established with large investments.Different electrode design and different electrolytes have been tested to find the best electrode design and electrolyte for higher amount of HHO production using same electric energy. HHO is used as an additional fuel without storage tanks in the four strokes, 4-cylinder compression ignition engine and two-stroke, one-cylinder spark ignition engine without any structural changes. Later, previously developed commercially available dry cell HHO reactor used as a fuel additive to neat diesel fuel and biodiesel fuel mixtures. HHO gas is used to hydrogenate the compressed natural gas (CNG) and different amounts of HHO-CNG fuel mixtures are used in a pilot injection CI engine. Pure diesel fuel and diesel fuel + biodiesel mixtures with different volumetric flow rates are also used as pilot injection fuel in the test engine. The effects of HHO enrichment on engine performance and emissions in compression-ignition and spark-ignition engines have been examined in detail. It is found from the experiments that plate type reactor with NaOH produced more HHO gas with the same amount of catalyst and electric energy. All experimental results from Gasoline and Diesel Engines show that performance and exhaust emission values have improved with hydroxy gas addition to the fossil fuels except NO_x exhaust emissions. The maximum average improvements in terms of performance and emissions of the gasoline and the diesel engine are both graphically and numerically expressed in results and discussions. The maximum average improvements obtained for brake power, brake torque and BSFC values of the gasoline engine were 27%, 32.4% and 16.3%, respectively. Furthermore, maximum improvements in performance data obtained with the use of HHO enriched biodiesel fuel mixture in diesel engine were 8.31% for brake power, 7.1% for brake torque and 10% for BSFC.     

Efficiency and pollutant emissions of an SI engine using biogas-hydrogen fuel blends: BIO60, BIO95, H20BIO60 and H20BIO95

Our planet has been experiencing abrupt climate changes in recent years. The major contributor to this phenomenon is, without doubt, emissions of gases derived from petroleum-based fuels, compared to their high consumption, especially diesel and gasoline. In Brazil, the sum of all motorized trips shows that more than half of them (60%) is based on public transport, with buses carrying 94% of all those who use this service. These vehicles, in their vast majority, use the technology of Compression Ignition (CI) engines. On the other hand, studies have shown that the country has a high biofuel production potential from various sources, such as landfills and hydroelectric plants, with an extensive production of biogas and hydrogen, that can be used, for example, in Spark Ignition (SI) engines. Nevertheless, SI engines have lower efficiency than CI engines. Part load operation of SI engines is conventionally achieved by the use of a throttle to control the airflow or air-fuel mixture into the engine. When operating at partial load the throttle causes exergy losses what affecting on decreasing engine efficiency. With the objective of analysing the emission of pollutants and the efficiency of conversion of fuel chemical energy, this work presents an analysis on the use of blends of hydrogen (H₂), biogas (BIO60) and methane (BIO95) using an SI engine. The system was operated in partial load and the addition of H₂ was an attempt to increase efficiency by reducing the pumping work through the throttle, once it was possible increasing the lambda value. The tests were performed at different ignition angles and air/fuel ratio. The value of ignition advance angle has been adjusted to obtain maximum Brake Thermal Efficiency (BTE) of the engine. It was possible to recognize that the addition of H₂ allowed the combustion limits to be extended. On the other hand, reduced values of CO and NO_x emissions could be achieved.     

Experimental investigation of SI engine characteristics using Acetone-Butanol-Ethanol (ABE) – Gasoline blends and optimization using Particle Swarm Optimization

This study conducts an experimental investigation of spark ignition (SI) engine characteristics using gasoline blended with Acetone-Butanol-Ethanol (ABE) that act as hydrogen and oxygen carriers. The number of experiments is planned and executed according to a design of experiments with full-factorial design, wherein ABE blend percentage and speed are taken as input parameters and brake thermal efficiency (BTE), emissions of carbon monoxide (CO), hydrocarbon (HC), and oxides of nitrogen (NOx) are taken as the responses. In the present study, a multi-objective optimization technique, Particle Swarm Optimization (PSO), is used to optimize spark ignition engine performance and emission parameters. The results predicted by the regression model are compared with the experimental results. PSO is used to study the Pareto front of BTE, CO, HC, and NOx, respectively. The results indicated that when the engine is run at 1500 rpm, with the fuel blend having 5.4% ethanol, a minimum value of 0.58% CO, 211 ppm of HC are obtained, giving a maximum BTE of 28%. Similarly, when the engine is run at 2264 rpm with a 5% ethanol blend, minimum NOx emission of 1029 ppm and a maximum BTE of 30% are obtained.     

Syngas (H2/CO) in a spark-ignition direct-injection engine. Part 1: Combustion,performance and emissions comparison with CNG

The combustion, performance, and emissions of syngas (H₂/CO) in a four-stroke, direct-injection, spark-ignition engine were experimentally investigated. The engine was operated at various speeds, ranging from 1500 to 2400 rev/min, with the throttle being held in the wide-open position. The start of fuel injection was fixed at 180° before the top dead center, and the ignition advance was set at the maximal brake torque. The air/fuel ratio was varied from the technically possible lowest excess air ratio (λ) to lean operation limits. The results indicated that a wider air/fuel operating ratio is possible with syngas with a very low coefficient of variation. The syngas produced a higher in-cylinder peak pressure and heat-release rate peak and faster combustion than for CNG. However, CNG produced a higher brake thermal efficiency (BTE) and lower brake specific fuel consumption (BSFC). The BTE and BSFC of the syngas were on par to those of CNG at higher speeds. For the syngas, the total hydrocarbon emission was negligible at all load conditions, and the carbon monoxide emission was negligible at higher loads and increased under lower load conditions. However, the emission of nitrogen oxides was higher at higher loads with syngas.     

Experimental and numerical investigation of effects of CNG and gasoline fuels on engine performance and emissions in a dual sequential spark ignition engine

Compared to widening usage of CNG in commercial gasoline engines, insufficient but increasing number of studies have appeared in open literature during last decades while engine characteristics need to be quantified in exact numbers for each specific fuel converted engine. In this study, a dual sequential spark ignition engine (Honda L13A4 i-DSI) is tested separately either with gasoline or CNG at wide open throttle. This specific engine has unique features of dual sequential ignition with variable timing, asymmetrical combustion chamber, and diagonally positioned dual spark-plug. Thus, the engine led some important engine technologies of VTEC and VVT. Tests are performed by varying the engine speed from 1500 rpm to 4000 rpm with an increment of 500 rpm. The engine’s maximum torque speed of 2800 rpm is also tested. For gasoline and CNG fuels, engine performance (brake torque, brake power, brake specific fuel consumption, brake mean effective pressure), emissions (O₂, CO₂, CO, HC, NO_x, and lambda), and the exhaust gas temperature are evaluated. In addition, numerical engine analyses are performed by constructing a 1-D model for the entire test rig and the engine by using Ricardo-Wave software. In the 1-D engine model, same test parameters are analyzed, and same test outputs are calculated. Thus, the test and the 1-D engine model are employed to quantify the effects of gasoline and CNG fuels on the engine performance and emissions for a unique engine. In general, all test and model results show similar and close trends. Results for the tested commercial engine show that CNG operation decreases the brake torque (12.7%), the brake power (12.4%), the brake mean effective pressure (12.8%), the brake specific fuel consumption (16.5%), the CO₂ emission (12.1%), the CO emission (89.7%). The HC emission for CNG is much lower than gasoline. The O₂ emission for CNG is approximately 55.4% higher than gasoline. The NO_x emission for CNG at high speeds is higher than gasoline. The variation percentages are the averages of the considered speed range from 1500 rpm to 4000 rpm.     

Comparison between blended mode and fumigation mode on combustion,performance and emissions of a diesel engine fueled with ternary fuel (diesel-biodiesel-ethanol) based on engine speed

According to the literature, there is in lack of a comprehensive study to compare the combustion, performance and emissions of a diesel engine using diesel, biodiesel and ethanol fuels (DBE) in the blended mode and fumigation mode under various engine speeds. This study was conducted to fill this knowledge gap by comparing the effect of blended, fumigation and combined fumigation + blended (F + B) modes on the combustion, performance and emissions of a diesel engine under a constant engine load (50% of full torque) with five engine speeds ranging from 1400 rpm to 2200 rpm. A constant overall fuel composition of 80% diesel, 5% biodiesel and 15% ethanol, by volume % (D80B5E15), was utilized to provide the same fuel for comparing the three fueling modes.According to the average results of five engine speeds, the blended mode has higher peak heat release rate (HRR), ignition delay (ID), brake thermal efficiency (BTE), brake specific nitrogen monoxide (BSNO) and brake specific nitrogen oxides (BSNO_X), but lower duration of combustion (DOC), brake specific fuel consumption (BSFC), brake specific carbon dioxide (BSCO₂), brake specific carbon monoxide (BSCO), brake specific hydrocarbon (BSHC), brake specific nitrogen dioxide (BSNO₂), brake specific particulate matter (BSPM), total number concentration (TNC) and geometric mean diameter (GMD), and similar peak in-cylinder pressure compared to the fumigation mode. In addition, for almost all the parameters, results obtained in the F + B mode are in between those of the blended and fumigation modes. In regard to the effect of engine speed, the results reveal that the increase in engine speed causes reduction in peak in-cylinder pressure, BTE, BSHC, BSNO_X, BSNO and BSNO₂, but increase in peak HRR, ID, DOC, BSFC, BSCO₂, BSPM and TNC, and similar BSCO and GMD for almost all the tested fueling modes. It can be inferred that the blended mode is the suitable fueling mode, compared with the fumigation mode, under the operating conditions investigated in this study.     

An experimental study on performance and emission characteristics of a methane–hydrogen fuelled gasoline engine

In this paper, the performance and emission characteristics of a conventional twin-cylinder, four stroke, spark-ignited (SI) engine that is running with methane–hydrogen blends have been investigated experimentally. The engine was modified to realize hydrogen port injection by installing hydrogen feeding line in the intake manifolds. The experimental results have been demonstrated that the brake specific fuel consumption (BSFC) increased with the increase of hydrogen fraction in fuel blends at low speeds. On the other hand, as hydrogen percentage in the mixture increased, BSFC values decreased at high speeds. Furthermore, brake thermal efficiencies were found to decrease with the increase in percentage of hydrogen added. In addition, it has been found that CO₂, NO_x and HC emissions decrease with increasing hydrogen. However, CO emissions tended to increase with the addition of hydrogen generally increase. It has been showed that hydrogen is a very good choice as a gasoline engine fuel. The data are also very useful for operational changes needed to optimize the hydrogen fuelled SI engine design.     

Influence of injection timing on performance,combustion and emission characteristics of Jatropha biodiesel engine

The study of effect of injection timing along with engine operating parameters in Jatropha biodiesel engine is important as they significantly affect its performance and emissions. The present paper focuses on the experimental investigation of the influence of injection timing, load torque and engine speed on the performance, combustion and emission characteristics of Jatropha biodiesel engine. For this purpose, the experiments were conducted using full factorial design consisting of (3³) with 27 runs for each fuel, diesel and Jatropha biodiesel. The effect of variation of above three parameters on brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), peak cylinder pressure (P_max), maximum heat release rate (HRR_max), CO, HC, NO emissions and smoke density were investigated. It has been observed that advance in injection timing from factory settings caused reduction in BSFC, CO, HC and smoke levels and increase in BTE, P_max, HRR_max and NO emission with Jatropha biodiesel operation. However, retarded injection timing caused effects in the other way. At 15 N m load torque, 1800 rpm engine speed and 340 crank angle degree (CAD) injection timing, the percentage reduction in BSFC, CO, HC and smoke levels were 5.1%, 2.5%, 1.2% and 1.5% respectively. Similarly the percentage increase in BTE, P_max, HRR_max and NO emission at this injection timing, load and speed were 5.3%, 1.8%, 26% and 20% respectively. The best injection timing for Jatropha biodiesel operation with minimum BSFC, CO, HC and smoke and with maximum BTE, P_max, HRR_max is found to be 340 CAD. Nevertheless, minimum NO emission yielded an optimum injection timing of 350 CAD.     

Combustion,performances, and emissions characteristics of Hermetia illucens larvae oil in a direct injection compression ignition engine

Hermetia illucens larvae oil (HILO) is among biofuel feedstock from insects that has high potential to reduce dependency on petroleum resources. The present paper is motivated by the need to critically examine the effect of HILO mixed with diesel fuel (DF) on combustion, engine performance, and emission characteristics of a single cylinder direct injection (DI) compression ignition (CI) engine. The experiment was performed at a constant speed of 1500 rpm under various engine loads. The results revealed that the in-cylinder pressure, heat release rate (HRR), and the ignition delay (ID) were reduced by an average of 3.32%, 12.89%, and 4.36%, respectively. The brake specific fuel consumption (BSFC) and exhaust gas temperature (EGT) increased considerably at all engine loads. The brake thermal efficiency (BTE) was discovered to be lower by 11.47% compared to DF. The finding also shows that carbon monoxide (CO), carbon dioxide (CO₂), and unburned hydrocarbon (UHC) emissions increased with the addition of HILO. The nitrogen oxides (NO_x) emission reduced by 19.80% compared to DF at all the engine loads. Overall, this study concluded the potential of HILO in CI engine as a promising renewable and environmentally friendly resource for the better earth.