固体氧化物燃料电池电热冷联供总能系统的分析

提出了一个由固体氧化物燃料电池和吸收式制冷机组成的电热冷联供总能系统,应用MATLAB软件包对总能系统进行了模拟分析,得到了燃料电池的电流密度、燃料流量、输出功率等参数对总能系统的影响,为高温燃料电池电热冷联供总能系统的设计与优化提供参考依据。     

Energy and exergy analyses of a combined ammonia-fed solid oxide fuel cell system for vehicular applications

In this study, both energetic and exergetic performances of a combined heat and power (CHP) system for vehicular applications are evaluated. This system proposes ammonia-fed solid oxide fuel cells based on proton conducting electrolyte (SOFC-H⁺) with a heat recovery option. Fuel consumption of combined fuel cell and energy storage system is investigated for several cases. The performance of the portable SOFC system is studied in a wide range of the cell’s average current densities and fuel utilization ratios. Considering a heat recovery option, the system exergy efficiency is calculated to be 60-90% as a function of current density, whereas energy efficiency varies between 60 and 40%, respectively. The largest exergy destructions take place in the SOFC stack, micro-turbine, and first heat exchanger. The entropy generation rate in the CHP system shows a 25% decrease for every 100 °C increase in average operating temperature.     

Comparison of three different control strategies for load-change and attenuation of solid oxide fuel cell system

Solid oxide fuel cell (SOFC) with a lot of advantages, such as high efficiency, low emission and great fuel compatibility, has broad application prospects in many fields. However, an appropriate control strategy is necessary for SOFC systems, which could not only maintain high system efficiency during load-change, but also supplement power after attenuation to extend system service life. In the article, three different control strategies are proposed, in which fuel flow, fuel utilization and cell voltage are controlled as constants respectively. The performance and applicability of strategies for load-change and cell degradation are evaluated through experiment data and simulations. Meanwhile, stack temperature, voltage, fuel utilization and efficiency are selected as main constraints to analyze the application scope of strategies. And in load increasing process of a 1 kW SOFC combined heat and power (CHP) system fed with methanol, the strategies are adopted to verify their effectiveness.     

天然气水蒸气重整与SOFC耦合应用

固体氧化物燃料电池（SOFC）系统具有高能源效率和使用可再生燃料的可能性,将在未来的可持续能源系统中发挥重要作用。过去几年燃料电池的发展很快,但在成本、稳定性和市场份额方面,该技术仍处于早期发展阶段。在以天然气为燃料的SOFC系统中,燃料的重整过程和燃料利用水平都可能影响系统运行的稳定性、热量和能量平衡,从而影响系统的使用寿命、输出功率和效率。因此,对燃料重整过程的设计与控制对有效的SOFC电池运行具有重要意义。对天然气在SOFC系统中的重整器配置方式（包括外重整和内重整）、重整参数和重整燃料利用方式进行了详细的综述分析,并对未来天然气SOFC系统的发展进行了展望。     

An analysis of SOFC/GT CHP system based on exergetic performance criteria

In this study, we first consider developing a thermodynamic model of solid oxide fuel cell/gas turbine combined heat and power (SOFC/GT CHP) system under steady-state operation using zero-dimensional approach. Additionally, energetic performance results of the developed model are compared with the literature concerning SOFC/GT hybrid systems for its reliability. Moreover, exergy analysis is carried out based on the developed model to obtain a more efficient system by the determination of irreversibilities. For exergetic performance evaluation, exergy efficiency, exergy output and exergy loss rate of the system are considered as classical criteria. Alternatively, exergetic performance coefficient (EPC) as a new criterion is investigated with regard to main design parameters such as fuel utilization, current density, recuperator effectiveness, compressor pressure ratio and pinch point temperature, aiming at achieving higher exergy output with lower exergy loss in the system. The simulation results of the SOFC/GT CHP system investigated, working at maximum EPC conditions, show that a design based on EPC criterion has considerable advantage in terms of entropy-generation rate.     

Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review

The main concerns in the world today, especially in the energy field, are subjected to clean, efficient, and durable sources of energy. These three aspects are the main goals that scientist are paying attention to. However, the various types of energy resources include fossil and sustainable ones, but still some challenges are chasing these kinds from energy conversion, storage, and efficiency. Hence, the most reliable and considered energy resource nowadays is the utilized one which is as highly efficient, clean, and everlasting as possible. So, in this review, an attempt is made to highlight one of the promising types as a clean and efficient energy resource. Solid oxide fuel cell (SOFC) is the most efficient type of the fuel cell types involved with hydrogen and hydrocarbon-based fuels, especially when it works with combined heat and power (CHP). The importance of this type is due to its nature of work as conversion tool from chemical to electrical for generation of power without noise, pollution, and can be safely handled.     

Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications

A total energy system (TES) incorporating a solid oxide fuel cell (SOFC) and an exhaust gas driven absorption chiller (AC) is presented to provide power, cooling and/or heating simultaneously. The purpose for using the absorption chiller is to recover the exhaust heat from the SOFC exhaust gas for enhancing the energy utilization efficiency of the TES. A steady-state mathematical model is developed to simulate the effects of different operating conditions of SOFC, such as the fuel utilization factor and average current density, on the performance of the TES by using the MATLAB softpackage. Parametric analysis shows that both electrical efficiency and total efficiency of the TES have maximum values with variation of the fuel utilization factor; while the cooling efficiency increases, the electrical efficiency and total efficiency decrease with increase in the current density of SOFC. The simulated results could provide useful knowledge for the design and optimization of the proposed total energy system.     

Dynamic modeling and evaluation of solid oxide fuel cell - combined heat and power system operating strategies

Operating strategies of solid oxide fuel cell (SOFC) combined heat and power (CHP) systems are developed and evaluated from a utility, and end-user perspective using a fully integrated SOFC-CHP system dynamic model that resolves the physical states, thermal integration and overall efficiency of the system. The model can be modified for any SOFC-CHP system, but the present analysis is applied to a hotel in southern California based on measured electric and heating loads. Analysis indicates that combined heat and power systems can be operated to benefit both the end-users and the utility, providing more efficient electric generation as well as grid ancillary services, namely dispatchable urban power.Design and operating strategies considered in the paper include optimal sizing of the fuel cell, thermal energy storage to dispatch heat, and operating the fuel cell to provide flexible grid power. Analysis results indicate that with a 13.1% average increase in price-of-electricity (POE), the system can provide the grid with a 50% operating range of dispatchable urban power at an overall thermal efficiency of 80%. This grid-support operating mode increases the operational flexibility of the SOFC-CHP system, which may make the technology an important utility asset for accommodating the increased penetration of intermittent renewable power.     

Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications

The evaluation of solid oxide fuel cell (SOFC) combined heat and power (CHP) system configurations for application in residential dwellings is explored through modeling and simulation of cell-stacks including the balance-of-plant equipment. Five different SOFC system designs are evaluated in terms of their energetic performance and suitability for meeting residential thermal-to-electric ratios. Effective system concepts and key performance parameters are identified. The SOFC stack performance is based on anode-supported planar geometry. A cell model is scaled-up to predict voltage–current performance characteristics when served with either hydrogen or methane fuel gas sources. System comparisons for both fuel types are made in terms of first and second law efficiencies. The results indicate that maximum efficiency is achieved when cathode and anode gas recirculation is used along with internal reforming of methane. System electric efficiencies of 40% HHV (45% LHV) and combined heat and power efficiencies of 79% (88% LHV) are described. The amount of heat loss from small-scale SOFC systems is included in the analyses and can have an adverse impact on CHP efficiency. Performance comparisons of hydrogen-fueled versus methane-fueled SOFC systems are also given. The comparisons indicate that hydrogen-based SOFC systems do not offer efficiency performance advantages over methane-fueled SOFC systems. Sensitivity of this result to fuel cell operating parameter selection demonstrates that the magnitude of the efficiency advantage of methane-fueled SOFC systems over hydrogen-fueled ones can be as high as 6%.     

Advanced tubular solid oxide fuel cells with high efficiency for internal reforming of hydrocarbon fuels

Solid oxide fuel cells (SOFCs) constitute an attractive power-generation technology that converts chemical energy directly into electricity while causing little pollution. NanoDynamics Energy (NDE) Inc. has developed micro-tubular SOFC-based portable power generation systems that run on both gaseous and liquid fuels. In this paper, we present our next generation solid oxide fuel cells that exhibit total efficiencies in excess of 60% running on hydrogen fuel and 40+% running on readily available gaseous hydrocarbon fuels such as propane, butane etc. The advanced fuel cell design enables power generation at very high power densities and efficiencies (lower heating value-based) while reforming different hydrocarbon fuels directly inside the tubular SOFC without the aid of fuel pre-processing/reforming. The integrated catalytic layered SOFC demonstrated stable performance for >1000 h at high efficiency while running on propane fuel at sub-stoichiometric oxygen-to-fuel ratios. This technology will facilitate the introduction of highly efficient, reliable, fuel flexible, and lightweight portable power generation systems.     

Optimization and efficiency analysis of methanol SOFC-PEMFC hybrid system

In order to improve the power generation efficiency of fuel cell systems employing liquid fuels, a hybrid system consisting of solid oxide fuel cell (SOFC) and proton exchange membrane fuel cell (PEMFC) is proposed. Utilize the high temperature heat generated by SOFC to reform as much methanol as possible to improve the overall energy efficiency of the system. When SOFC has a stable output of 100 kW, the amount of hydrogen after reforming is changed by changing the methanol flow rate. Three hybrid systems are proposed to compare and select the best system process suitable for different situations. The results show that the combined combustion system has the highest power generation, which can reach 350 kW and the total electrical efficiency is 57%. When the power of the tail gas preheating system is 160 kW, the electrical efficiency can reach 75%. The PEM water preheating system has the most balanced performance, with the electric power of 300 kW and the efficiency of 66%.     

Thermodynamic analysis of an SOFC–GT–ORC integrated power system with liquefied natural gas as heat sink

To recover the waste heat from solid oxide fuel cell (SOFC) and improve the overall electrical efficiency, a new integrated power system driven by SOFC is proposed to achieve the cascade energy utilization. This system integrates an SOFC–GT system with an organic Rankine cycle (ORC) using liquefied natural gas (LNG) as heat sink to recover the cryogenic energy of LNG. Based on the mathematical model, a parametric analysis is conducted to examine the effects of some key thermodynamic parameters on the system performance. The results indicate that the overall electrical efficiency of 67% can be easily achieved for the current system, which can be further improved with parametric optimization. An increase in fuel flow rate of SOFC can raise the net power output, but it has a negative effect on SOFC and overall electrical efficiency. The compressor pressure ratio contributes to an increase in SOFC and overall electrical efficiency, which are contrary to the effects of air flow rate and steam-to-carbon ratio. Under the given conditions, compared with the Kalina sub-system, the ORC sub-system produces 12.6% more power output by utilizing the cryogenic energy of LNG with simple configuration.     

Exergy analysis and optimization of a biomass gasification, solid oxide fuel cell and micro gas turbine hybrid system

A hybrid plant producing combined heat and power (CHP) from biomass by use of a two-stage gasification concept, solid oxide fuel cells (SOFC) and a micro gas turbine was considered for optimization. The hybrid plant represents a sustainable and efficient alternative to conventional decentralized CHP plants. A clean product gas was produced by the demonstrated two-stage gasifier, thus only simple gas conditioning was necessary prior to the SOFC stack. The plant was investigated by thermodynamic modeling combining zero-dimensional component models into complete system-level models. Energy and exergy analyses were applied. Focus in this optimization study was heat management, and the optimization efforts resulted in a substantial gain of approximately 6% in the electrical efficiency of the plant. The optimized hybrid plant produced approximately 290 kW_e at an electrical efficiency of 58.2% based on lower heating value (LHV).     

固体氧化物燃料电池与燃气轮机联合发电系统模拟研究

固体氧化物燃料电池(SOFC)是一种高效低污染的新型能源。建立了以天然气为燃料的固体氧化物燃料电池和燃气轮机(GT)联合发电系统的计算模型,并对具体系统进行计算。结果表明：SOFC与GT组戍的联合发电系统,发电效率可达68％(LHV);加上利用的余热,整个系统的能量利用率可以超过80％。文中还分析了SOFC的工作压力、电流密度等参数对系统性能的影响,提高工作压力,可以增加电池发电量,提高系统的发电效率;而电流密度的增大将使SOFC及整个系统的发电量降低。     

Development of an integrated gasifier-solid oxide fuel cell test system: A detailed system study

A detailed system study on an integrated gasifier-SOFC test system which is being constructed for combined heat and power (CHP) application is presented. The performance of the system is evaluated using thermodynamic calculations. The system includes a fixed bed gasifier and a 5 kW SOFC CHP system. Two kinds of gas cleaning systems, a combined high and low temperature gas cleaning system and a high temperature gas cleaning system, are considered to connect the gasifier and the SOFC system. A complete model of the gasifier-SOFC system with these two gas cleaning systems is built and evaluated in terms of energy and exergy efficiencies. A sensitivity study is carried out to check system responses to different working parameters. The results of this work show that the electrical efficiencies of the gasifier-SOFC CHP systems with different gas cleaning systems are almost the same whereas the gasifier-SOFC CHP systems with the high temperature gas cleaning system offers higher heat efficiency for both energy and exergy.     

基于固体氧化物燃料电池的高效清洁发电系统

  目的  固体氧化物燃料电池（SOFC）是一种尖端技术,可通过电化学反应将碳氢燃料中的化学能转化为电和热,具有燃料来源广、发电效率高、余热品质高、运行安静、排放低、可模块化安装等优点,是实现化石能源高效清洁利用的有效途径之一。  方法  文章阐释了SOFC发电原理,介绍了国内外SOFC技术和产业化现状,分析了基于SOFC的分布式热电联供、联合循环发电以及煤气化燃料电池发电技术（IGFC）新一代发电系统应用场景。  结果  通过燃料电池发电技术路线和产业化现状研究,浅析了目前存在的问题,并结合我国资源禀赋和对高效清洁发电装置的市场需求,对该领域的未来发展趋势进行了展望。  结论  对比国内外在SOFC领域的技术差距,基于国内在SOFC电堆核心材料方面的优势,加大对SOFC系统集成技术攻关,为新一代以高温燃料电池为核心的清洁高效发电产业奠定基础。     

Performance evaluation of different configurations of biogas-fuelled SOFC micro-CHP systems for residential applications

Three configurations of solid oxide fuel cell (SOFC) micro-combined heat and power (micro-CHP) systems are studied with a particular emphasis on the application for single-family detached dwellings. Biogas is considered to be the primary fuel for the systems studied. In each system, a different method is used for processing the biogas fuel to prevent carbon deposition over the anode of the cells used in the SOFC stack. The anode exit gas recirculation, steam reforming, and partial oxidation are the methods employed in systems I–III, respectively. The results predicted through computer simulation of these systems confirm that the net AC electrical efficiency of around 42.4%, 41.7% and 33.9% are attainable for systems I–III, respectively. Depending on the size, location and building type and design, all the systems studied are suitable to provide the domestic hot water and electric power demands for residential dwellings. The effect of the cell operating voltage at different fuel utilization ratios on the number of cells required for the SOFC stack to generate around 1 kW net AC electric power, the thermal-to-electric ratio (TER), the net AC electrical and CHP efficiencies, the biogas fuel consumption, and the excess air required for controlling the SOFC stack temperature is also studied through a detailed sensitivity analysis. The results point out that the cell design voltage is higher than the cell voltage at which the minimum number of cells is obtained for the SOFC stack.     

Techno-economic and environmental assessment of integrating SOFC with a conventional steam and power system in a natural gas processing plant

Solid oxide fuel cell (SOFC) technology has been proven to be a highly efficient electrochemical device that directly converts chemical energy into electrical energy with a potential to increase system efficiencies and to significantly reduce emissions in oil and gas operations. Enabling an effective integration and smarter utilization of SOFC systems at different scales and point-of-use can lead to an overall system efficiency improvement. In this research paper, two case studies, including the steam and power system in a gas plant, are considered for comparative analysis purposes. The first case study, base case, is a traditional steam and power system in a natural gas processing plant and the proposed case is the combined steam and power system with SOFC unit. Techno-economic and environmental analyses are performed for both cases. To carry out a comparative analysis, the power output of both cases is fixed at 20 MW. The results of this study show that a reduction of almost 35% in the emissions is possible and the cost of electricity becomes about 25% less for the proposed case.     

Thermodynamic modeling and exergy investigation of a hydrogen-based integrated system consisting of SOFC and CO2 capture option

The current study deals with the thermodynamic modeling of an innovative integrated plant based on solid oxide fuel cell (SOFC) with liquefied natural gas (LNG) cold energy supply. For the suggested innovative plant the energy, and exergy simulations are fully extended and the plant comprehensively analyzed. According to mathematical simulations of the proposed plant, a MATLAB code has been extended. The results indicate that under considered initial conditions, the efficiencies of SOFC and net power generation calculated 58% and 78%, respectively and the CO₂-capture rate is obtained 79 kg/h. This study clearly shows that the integrated system reached high efficiency while having zero emissions. In addition, the efficiencies and net amount of power generation, cooling or heating output and SOFC power generation are discussed in detail as a function of different variables such utilization factor, air/fuel ratio, or SOFC inlet temperature. For enhancing the power production efficiency of SOFC, the net electricity, and CCHP exergy efficiency the plant should run in higher utilization factor and lower air/fuel ration also it's important to approximately set SOFC temperature to its ideal temperature.     

Assessment of the reactor network approach for integrated modelling of an SOFC system

Incorporation of Solid-oxide fuel cells (SOFC) into hybrid systems with CHP capabilities is an attractive option for clean and efficient decentralised electricity generation. SOFC system operation on practical liquid fuels requires an efficient preparation system for the formation of a homogeneous reformate mixture. This can be accomplished with the use of a stabilized cool flame vapouriser (SCFV) combined with a thermal partial oxidation (T-POX) reformer, and such systems are already under development. The successful and efficient thermochemical operation of an SOFC system requires an accurate determination of the optimum conditions for each constituent component (e.g. fuel processing unit, fuel cell stack, off-gas burner) and for the integrated system. The present work demonstrates a computational methodology for the thermochemical assessment of a novel SOFC system operated on liquid fuels. Simulations have been performed, both at component and system levels, using a reactor network approach, involving a simplified flow and mixing representation, while retaining full detailed chemistry. Computations are performed at a component level with reactor networks specially formulated for the SCFV and the T-POX reactors, derived on the basis of CFD calculations, coupled with detailed kinetic mechanisms for n-heptane, a reasonable diesel fuel surrogate. Model predictions are compared against experimental data, wherever possible. The individual components are integrated at a system level and parametric analyses are performed so as to determine optimum conditions for efficient and clean operation.