High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting

The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni₉₀Mo₁₀ electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm^?2, while the Ni₄₀Mo₆₀ electrocatalyst shows an overpotential of 258 mV at 10 mA cm^?2 in OER. More significantly, the assembled Ni₄₀Mo₆₀//Ni₉₀Mo₁₀ electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm^?2 for overall water splitting.     

The 3D ultra-thin Cu1-xNixS/NF nanosheet as a highly efficient and stable electrocatalyst for overall water splitting

In recent years, the exploration of efficient and stable noble-metal-free electrocatalysts is becoming increasingly important, used mainly for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a new ultrathin porous Cu_1-xNi_xS/NF nanosheets array was constructed on the 3D nickel skeleton by two-step method: hydrothermal method and vulcanization method. Through these two processes, Cu_1-xNi_xS/NF has a larger specific surface area than that of foamed nickel (NF) and Cu_1-xNi_xO/NF. The Cu_1-xNi_xS/NF materials show excellent catalytic activity by accelerating the electron transfer rate and increase the amount of H₂ and O₂ produced. The lower overpotential was obtained only 350 mV at 20 mA cm⁻² for OER, not only that, but also the same phenomenon is pointed out in HER, optimal Cu_1-xNi_xS/NF presents low overpotentials of 189 mV to reach a current density of 10 mA cm⁻² in 1.0 M KOH for HER. Both OER and HER shows a lower Tafel slope: 51.2 mV dec⁻¹ and 127.2 mV dec⁻¹, subsequently, the overall water splitting activity of Cu_1-xNi_xS/NF was investigated, and the low cell voltage was 1.64 V (current density 10 mA cm⁻²). It can be stable for 14 h during the overall water splitting reaction. These results fully demonstrate that Cu_1-xNi_xS/NF non-precious metal materials can be invoked become one of the effective catalysts for overall water splitting, providing a richer resource for energy storage.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

Ni2P(O)–Fe2P(O)/CeOx as high effective bifunctional catalyst for overall water splitting

The development of cost-effective bifunctional catalysts with excellent performance and good stability is of great significance for overall water splitting. In this work, NiFe layered double hydroxides (LDHs) nanosheets are prepared on nickel foam by hydrothermal method, and then Ni₂P(O)–Fe₂P(O)/CeO_x nanosheets are in situ synthesized by electrodeposition and phosphating on NiFe LDHs. The obtained self-supporting Ni₂P(O)–Fe₂P(O)/CeO_x exhibit excellent catalytic performances in alkaline solution due to more active sites and fast electron transport. When the current density is 10 mA cm^?2, the overpotential of hydrogen evolution reaction and oxygen evolution reaction are 75 mV and 268 mV, respectively. In addition, driven by two Ni₂P(O)–Fe₂P(O)/CeO_x electrodes, the alkaline battery can reach 1.45 V at 10 mA cm^?2.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Enhanced OER performance of NiFeB amorphous alloys by surface self-reconstruction

The design and development of cost-effective and highly efficient oxygen evolution reaction (OER) electrocatalysts are urgently desirable during the water-splitting process. Here, Ni_xFe_80-xB₂₀ (x = 70, 60, 50, 40, 30, hereafter referred to as NFB) amorphous alloys, with high mechanical strength, excellent corrosion resistance, and unique atomic structure, are fabricated as efficient water oxidation electrocatalysts in alkaline solutions. Ni₄₀Fe₄₀B₂₀ amorphous ribbons achieve only 319 mV of overpotential at 10 mA·cm^?2 with a Tafel slope of 56 mV dec^?1 and exhibit excellent long-term stability for 24 h at 10 mA·cm^?2 and 100 mA·cm^?2 in 1 M KOH solution, which outperform the commercial RuO₂ electrocatalyst. It is worth noting that the OER performance of Ni_xFe_80-xB₂₀ amorphous electrocatalysts after long-term chronopotentiometry test displays more effectively, which can be ascribed to the surface construction. Meanwhile, the analysis of the morphology and structure of the electrocatalysts reveal that continuous oxidation during the OER process induces the structural reorganization on the surface of the electrocatalysts, which can enhance the electron transfer process and adsorption of the reaction intermediates to optimize the OER performance. This study provides a shred of evidence for surface self-reconstruction of NiFeB amorphous alloys electrocatalysts during the OER process and promotes the application of amorphous alloys as functional materials in the water-splitting field.     

Defect-induced FexNi1-xSe2 nanoparticles based electrocatalysts towards enhanced hydrogen and oxygen evolution reactions

Transition metal selenides are regarded as promising materials for the production of clean energy through electrocatalytic water splitting. Creation of defects in these metal selenides is one of the prudent strategies to enrich the active sites which in turn enhances the electrocatalytic activity of these materials and makes them viable for broader applications. Herein, defect-induced, iron-doped nickel selenide nanoparticles were prepared for the first time and their electrocatalytic efficacy towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been demonstrated. Fe_xNi_1-xSe₂ nanoparticles (x = 0.25, 0.50, 0.75) were prepared using a facile hydrothermal method, in which defects were induced by annealing at 300 °C to obtain DI-Fe_xNi_1-xSe₂. The structural and morphological investigations confirmed the size reduction and creation of defects after annealing, without any significant change in the crystal structure, which in turn is expected to promote the electrocatalytic activity. Accordingly, among all the materials investigated, DI-Fe_0.25Ni_0.75Se₂ has shown the highest HER activity in 0.5 M H₂SO₄ at a lesser overpotential of 128 mV at 10 mA cm^?2 and the Tafel slope was calculated to be 37.9 mV dec^?1. Interestingly, the same material has displayed high performance towards OER in 1 M KOH with a lesser overpotential at 205 mV and a Tafel slope of 55.5 mV dec^?1. Thus obtained electrocatalytic activity was much better than the reported nickel selenide based electrocatalysts. Further, the DI-Fe_0.25Ni_0.75Se₂ electrocatalyst has demonstrated impressive stability in the acidic and alkaline medium during continuous electrolysis even up to 12 h.     

Core-shell Ni3Fe-based nanocomposites for the oxygen evolution reaction

To deal with energy and environmental issues, it is necessary to exploit efficient and stable electrocatalysts for the generation of clean hydrogen. Herein, we describe the synthesis of bimetallic Fe/Ni alloy encapsulated by amorphous carbon shells via a facile annealing strategy for electrocatalytic oxygen evolution reaction (OER). The ferric nickel tartrate annealed at 800 °C (Ni₃Fe₁O_x@C-800) exhibits a low OER overpotential of 264 mV at 10 mA cm^?2 and good stability in alkaline media. Compared with monometallic counterpart, bimetallic Ni₃Fe-based nanocomposites show lower OER barrier (ca. 324 kJ mol^?1) due to a cooperation mechanism between Ni and Fe sites in promoting electrocatalytic water oxidation. Compared with those annealed at other temperatures, the enhanced OER performance of Ni₃Fe₁O_x@C-800 can be ascribed to the large electrochemical surface area for exposing more active sites, smaller charge transfer, and better intrinsic activity of Ni₃Fe-based sites.     

Binder-free bifunctional SnFe sulfide/oxyhydroxide heterostructure electrocatalysts for overall water splitting

Developing robust non-noble catalysts towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is vital for large-scale hydrogen production from electrochemical water splitting. Here, we synthesize Sn- and Fe-containing sulfides and oxyhydroxides anchored on nickel foam (SnFeS_xO_y/NF) using a solvothermal method, in which a heterostructure is generated between the sulfides and oxyhydroxides. The SnFeS_xO_y/NF exhibits low overpotentials of 85, 167, 249, and 324 mV at 10, 100, 500 and 1000 mA cm^?2 for the HER, respectively, and a low overpotential of only 281 mV at 100 mA cm^?2 for the OER. When it serves as both anode and cathode to assemble an electrolyzer, the cell voltage is only 1.69 V at 50 mA cm^?2. The sulfides should be the efficient active species for the HER, while the oxyhydroxides are highly active for the OER. The unique sulfide/oxyhydroxide heterostructure facilitates charge transfer and lowers reaction barrier, thus promoting electrocatalytic processes.     

Autogenous growth of highly active bifunctional Ni–Fe2B nanosheet arrays toward efficient overall water splitting

Developing an effective and low-cost bifunctional electrocatalyst for both OER and HER to achieve overall water splitting is remaining a challenge to meet the needs of sustainable development. Herein, an electroless plating method was employed to autogenous growth of ultrathin Ni–Fe₂B nanosheet arrays on nickel foam (NF), in which the whole liquid phase reduction reaction took no more than 20 min and did not require any other treatments such as calcination. In 1.0 M KOH electrolyte, the resulted Ni–Fe₂B ultrathin nanosheet displayed a low overpotential of 250 mV for OER and 115 mV for HER to deliver a current density of 10 mA cm^?2, and both OER and HER activities remained stable after 26 h stability testing. Further, the couple electrodes composed of Ni–Fe₂B could afford a current density of 10 mA cm^?2 towards overall water splitting at a cell voltage of 1.64 V in 1.0 M KOH and along with excellent stability for 26 h. The outstanding electrocatalytic activities can be attributed to the synergistic effect of electron-coupling across Ni and Fe atoms and active sites exposed by large surface area. The effective combination of low cost and high electrocatalytic activity brings about a promising prospect for Ni–Fe₂B nanosheet arrays in the field of overall water splitting.     

Efficient overall water splitting using nickel boride-based electrocatalysts

Currently there is tremendous interest in the discovery of low cost and efficient electrocatalysts for the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). In this work, iron-doped nickel boride (Fe_xNi_1-xB) and nickel boride (NiB) were successfully grown on 3D self-supporting graphene (SSG) electrodes via a one-step reduction approach. The Fe_0.2Ni_0.8B/SSG electrode required a very low overpotential of only 263 mV for OER (the best OER activity achieved to date for a metal boride). NiB/SSG showed modest OER performance but excellent HER activity. A water electrolyzer comprising Fe_0.2Ni_0.8B/SSG and NiB/SSG delivered a current density of 10 mA cm⁻² at a voltage of only 1.62 V. Further, the Fe_0.2Ni_0.8B/SSG and NiB/SSG catalysts showed excellent stability with no deactivation observed over 14 h of testing. Results demonstrate that nickel boride-based electrocatalysts are promising lost cost alternatives to precious metal-based electrocatalysts for OER, HER and overall water splitting.     

Cu2S/Ni3S2 ultrathin nanosheets on Ni foam as a highly efficient electrocatalyst for oxygen evolution reaction

It is an inevitable choice to find efficient and economically-friendly electrocatalysts to reduce the high overpotential of oxygen evolution reaction (OER), which is the key to improve the energy conversion efficiency of water splitting. Herein, we synthesized Cu₂S/Ni₃S₂ catalysts on nickel foam (NF) with different molar ratios of Ni/Cu by a simple two-step hydrothermal method. Cu₂S/Ni₃S₂-0.5@NF (CS/NS-0.5@NF) effectively reduces the overpotential of OER, displaying small overpotentials (237 mV@100 mA cm^?2 and 280 mV@500 mA cm^?2) in an alkaline solution, along with a low Tafel slope of 44 mV dec^?1. CS/NS-0.5@NF also presents an excellent durability at a relatively high current density of 100 mA cm^?2 for 100 h. The excellent performance is benefited by the prominent structural advantages and desirable compositions. The nanosheet has a high electrochemical active surface area and the porous structure is conducive to electrolyte penetration and product release. This work provides an economically-friendly Cu-based sulfide catalyst for effective electrosynthesis of OER.     

Synergistic coupling of CoFe-layered double hydroxide nanosheet arrays with reduced graphene oxide modified Ni foam for highly efficient oxygen evolution reaction and hydrogen evolution reaction

Novel CoFe-LDH (layered double hydroxide) nanosheet arrays in situ grown on rGO (reduced graphene oxide) uniformly modified Ni foam were synthesized by a citric acid-assisted aqueous phase coprecipitation strategy. Systematic characterizations indicates that the series of Co_xFe₁-LDH/rGO/NF (x = 4, 3, 2) all show Co_xFe₁-LDH nanosheets (150–180 × 15 nm) grown vertically on the surface of rGO/NF. Especially, the Co₃Fe₁-LDH/rGO/NF exhibits the best performance with overpotentials of 250 and 110 mV at 10 mA cm^?2 in 1 M KOH for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. When it is used as cathode and anode simultaneously for overall water splitting, they require 1.65 and 1.84 V at 10 and 100 mA cm^?2, respectively. Excellent performance of Co₃Fe₁-LDH/rGO/NF is due to the nanosheet arrays structure with open channels, synergistic coupling between Co₃Fe₁-LDH and rGO enhancing electrical conductivity, and in-situ growth of Co₃Fe₁-LDH on rGO/NF enhancing stability.     

Hydrothermally synthesized nickel molybdenum selenide composites as cost-effective and efficient trifunctional electrocatalysts for water splitting reactions

The development of efficient, cost-effective routes to prepare non-platinum-based electrocatalysts is a significant scientific challenge in water-splitting systems. A multifunctional electrocatalyst for the hydrogen evolution, oxygen evolution, and oxygen reduction reactions (HER/OER/ORR) involved in the water-splitting process was fabricated using a simple and eco-friendly strategy. The present study involves the simple synthesis of nanostructured nickel selenide (NiSe) via a hydrothermal method. The different phases of nickel selenide and their dependency on the precursor concentration were analyzed using X-ray diffraction (XRD). The morphologies of coral-like structured pure and Mo-doped NiSe (Ni_1-xMo_xSe) samples were investigated systematically using scanning electron microscopy (SEM). The as-prepared Ni_0.5Mo_0.5Se material showed an enhanced electrochemical activity of 1.57 V @ 10 mA/cm² for OER and 0.19 V @ 10 mA/cm² to HER, and follows the Volmer-Heyrovsky for HER mechanism. In addition, the electrocatalyst exhibits a large electrochemical surface area and high stability. Therefore, the hydrothermally synthesized Ni_1–xMo_xSe has been proven to be a perfect platinum-free trifunctional electrocatalyst for water splitting process.     

Composition-controlled chemical bath deposition of Fe-doped NiO microflowers for boosting oxygen evolution reaction

Water electrolysis for green hydrogen production is gaining tremendous attention in the quest towards sustainable energy sources. At the heart of water splitting technology are the electrocatalysts, which facilitate the two half-cell reactions, i.e., the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with the latter being the most thermodynamically uphill. Herein, we managed to fabricate Ni_1-xFe_xO microflowers (μFs) with varying % of Fe doping (0 < x < 0.36) via an easy chemical bath deposition (CBD) method. The as-synthesized μFs drop-casted on graphene paper (GP) are then applied as electrocatalysts for OER. Compared to contrast catalysts, the electrocatalyst with x_Fe = 0.1 exhibits a lower overpotential of 297 mV at a current density of 10 mA cm⁻², Tafel slope of 44 mV dec⁻¹ and unprecedented turnover frequency of 4.6 s⁻¹ at 300 mV. It is believed that this remarkable electrochemical performance mainly stems from the synergistic effects of Ni and Fe species, working in harmony to enhance charge transfer kinetics and intrinsic activity of the catalyst. This work provides a promising avenue for developing cost-effective and highly active electrocatalysts as advanced electrodes for energy related applications.     

Hydrogen production via highly efficient electrocatalyst based on 3D NixCo1-x(OH)2/NiFe-AM induce overall water splitting

The main factors limiting water splitting producing hydrogen production are overpotential, activity and persistence of electrocatalysts. Herein, a novel Ni_xCo_1-x(OH)₂ coupled with NiFe amorphous compound array growing on nickel foam substrate (expressed as Ni_xCo_1-x(OH)₂/NiFe-AM) was developed by facile hydrothermal and electrodeposition methods. Significantly, Ni_xCo_1-x(OH)₂/NiFe-AM with this unique structural exhibits superior activity and stability in the two half reactions of water electrolysis. In addition, when tested in an alkaline electrolyte with a current density of 10 mA cm⁻², the overpotentials of HER and OER was 157 mV and 196 mV (60 mA cm⁻²), respectively. The stability can up to 60 h. These test results show through constructing hierarchical nano-thron architecture enhanced electrocatalytic activity to produce hydrogen and oxygen.     

Bifunctional electrocatalysts for water splitting from a bimetallic (V doped-NixFey) Metal–Organic framework MOF@Graphene oxide composite

An ongoing challenge still lies in the exploration of proficient electrocatalysts from earth-abundant non-precious metals instead of noble metal-based catalysts for clean hydrogen energy through large-Scale electrochemical water splitting. However, developing a non-precious transition metals based, stable electrocatalyst for cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER) is important challenge for modern energy conversion technology. In this report Vanadium doped bimetallic nickel-iron nanoarray, fabricated by carbon supported architecture through carbonization process for electrochemical water splitting. Three types of catalysts were prepared in different molar ratio of Ni/Fe. The electrocatalytic performance demonstrated that the catalyst with equal mole ratio (0.06:0.06) of Ni/Fe possess high catalytic activity for both OER and HER in alkaline and acidic medium. Besides, our findings revealed that the doping of vanadium could play a strong synergetic effect with Ni/Fe, which provide a small overpotential of 90 mV and 210 mV at 10 mA cm^?2 for HER and OER respectively compared to the other two catalyst counterparts. Also, the catalyst with 1:1 (Ni/Fe) molar ratio showed a high current density of 208 mA cm^?2 for HER at 0.5 M H₂SO₄ and 579 mA cm^?2 for OER at 1 M KOH solution, the both current densities are much higher than the other two catalysts (different Ni/Fe ratio). In addition, the presented catalysts showed extremely good durability, reflecting in more than 20 h of consistent Chronoamprometry study at fixed overpotential η = 250 mV without any visible voltage elevation. Similarly, the (Ni/Fe) equal ratio catalyst showed better corrosion potential 0.209 V vs Ag/AgCl and lower current density 0.594 × 10^?12 A cm^?2 in high alkaline medium. The V-doping, MOF/GO surface defects are significantly increased the corrosion potential of the V-Ni_xFe_y-MOF/GO electrocatalyst. Besides, the water electrolyzed products were analysed by gas chromatography to get clear insights on the formed H₂ and O₂ products.     

In situ growth of NiCoFe-layered double hydroxide through etching Ni foam matrix for highly enhanced oxygen evolution reaction

It is of great significance to develop the nonprecious metal oxide electrocatalysts toward oxygen evolution reaction (OER) for water splitting. Herein we report an in-situ growth of the ternary NiCoFe-layered double hydroxide nanosheets on surface etching nickel foam (NiCoFe LDHs/NF) without adding any nickel precursor. In this method, etching Ni matrix by Fe³⁺ not only provides the slowly released nickel ions, but also intensifies the Fe–Ni interaction between the directly grown active species and Ni foam. Therefore the composition, electronic structure, and morphology of the electrocatalysts can be easily regulated only by adjusting Co²⁺:Fe³⁺ ratio in the precursor solution. The obtained NiCo₁Fe₁ LDH/NF, which is formed in 1:1 Co²⁺:Fe³⁺ solution, has highest content of Ni³⁺ and Co³⁺ active sites and the largest electrochemical active area. It exhibits an outstanding OER performance with a small overpotential of 231 mV at 10 mA cm^?2 and excellent durability at 50 mA cm^?2 in 1.0 M KOH solution.     

Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Spatially confined growth of ultrathin NiFe layered double hydroxide nanosheets within carbon nanofibers network for highly efficient water oxidation

The rational design of catalysts with low cost, high efficient and robust stability toward oxygen evolution reaction (OER) is greatly desired but remains a formidable challenge. In this work, a one-pot, spatially confined strategy was reported to fabricate ultrathin NiFe layered double hydroxide (NiFe-LDH) nanosheets interconnected by ultrafine, strong carbon nanofibers (CNFs) network. The as-fabricated NiFe-LDH/CNFs catalyst exhibits enhanced OER catalytic activity in terms of low overpotential of 230 mV to obtain an OER current density of 10 mA cm^?2 and very small Tafel slope of 34 mV dec^?1, outperforming pure NiFe-LDH nanosheets assembly, commercial RuO₂, and most non-noble metal catalysts ever reported. It also delivers an excellent structural and electrocatalytic stability upon the long-term OER operation at a large current of 30 mA cm^?2 for 40 h. Furthermore, the cell assembled by using NiFe-LDH/CNFs and commercial Pt/C as anode (+) and cathode (?) ((+)NiFe-LDH/CNFs||Pt/C(?)) only requires a potential of 1.50 V to deliver the water splitting current of 10 mA cm^?2, 130 mV lower than that of (+)RuO₂||Pt/C(?) couple, demonstrating great potential for applications in cost-efficient water splitting devices.