Review of hydrogen economy in Malaysia and its way forward

Heavy fossil fuels consumption has raised concerns over the energy security and climate change while hydrogen is regarded as the fuel of future to decarbonize global energy use. Hydrogen is commonly used as feedstocks in chemical industries and has a wide range of energy applications such as vehicle fuel, boiler fuel, and energy storage. However, the development of hydrogen energy in Malaysia is sluggish despite the predefined targets in hydrogen roadmap. This paper aims to study the future directions of hydrogen economy in Malaysia considering a variety of hydrogen applications. The potential approaches for hydrogen production, storage, distribution and application in Malaysia have been reviewed and the challenges of hydrogen economy are discussed. A conceptual framework for the accomplishment of hydrogen economy has been proposed where renewable hydrogen could penetrate Malaysia market in three phases. In the first phase, the market should aim to utilize the hydrogen as feedstock for chemical industries. Once the hydrogen production side is matured in the second phase, hydrogen should be used as fuel in internal combustion engines or burners. In the final phase hydrogen should be used as fuel for automobiles (using fuel cell), fuel-cell combined heat and power (CHP) and as energy storage.     

Technological-economic assessment and optimization of hydrogen-based transportation systems in China: A life cycle perspective

Hydrogen energy is increasingly incorporated into long-distance transportation systems. Whether the coupled hydrogen-based transportation system can achieve a sustainable business operation mode requires quantification of environmental and economic performance by a comprehensive cost-benefit analysis. This study proposes a cost-based life cycle assessment method to evaluate the environmental and economic benefits of hydrogen-based long-distance transportation systems. The innovative cost assessment method introduces internal and external economic costs to conduct a multi-scenario assessment. According to the key factors of mileage, government subsidies and hydrogen fuel prices, this research identifies the key cost component of the hydrogen-based transportation system in China by using a multilevel comparison with cell-driven and oil-fueled vehicles. The results show that hydrogen fuel cell electric vehicles are competitive in terms of both fuel costs and environmental costs. As hydrogen costs are expected to be gradually reduced by 43% in the future, hydrogen logistics vehicles and heavy trucks are expected to have better life-cycle economics than other energy vehicles by approximately 2030. Hydrogen buses will outperform other vehicles by approximately 2033, while hydrogen passenger cars will have a reduced life-cycle cost per kilometre within 0.1 CHY/km compared to other vehicles by approximately 2035. Ultimately, fuel consumption, average annual mileage, and hydrogen fuel cell electric vehicle policy are three factors that have greater impacts. Policy implications are put forward to implement optimal investment plan for hydrogen transportation systems.     

Economic valuation of green hydrogen charging compared to gray hydrogen charging: The case of South Korea

The South Korean government promotes hydrogen-powered vehicles to reduce greenhouse gas (GHG) emissions but these vehicles use gray hydrogen while charging, which causes GHG emissions. Therefore, converting this fuel into green hydrogen is necessary to help reduce GHG emissions, which will incur investment costs of approximately USD 20 billion over a decade. In this study, a contingent valuation method is applied in an analysis to examine the extent to which consumers are willing to pay for green hydrogen charging compared to gray hydrogen charging. The results indicate that the monthly mean of willingness to pay per driver is 51,674 KRW (USD 45.85), equivalent to 4302 KRW per kg (USD 3.82). Additionally, consumers accept a 28.5% increase in the monthly average fuel expenses when converting to green hydrogen. These findings can be used in the development of pricing and energy use plans to finance the expansion of green hydrogen infrastructure.     

A review on current trends in potential use of metal-organic framework for hydrogen storage

Hydrogen can be a promising clean energy carrier for the replenishment of non-renewable fossil fuels. The set back of hydrogen as an alternative fuel is due to its difficulties in feasible storage and safety concerns. Current hydrogen adsorption technologies, such as cryo-compressed and liquefied storage, are costly for practical applications. Metal-organic frameworks (MOFs) are crystalline materials that have structural versatility, high porosity and surface area, which can adsorb hydrogen efficiently. Hydrogen is adsorbed by physisorption on the MOFs through weak van der Waals force of attraction which can be easily desorbed by applying suitable heat or pressure. The strategies to improve the MOFs surface area, hydrogen uptake capacities and parameters affecting them are studied. Hydrogen spill over mechanism is found to provide high-density storage when compared to other mechanisms. MOFs can be used as proton exchange membranes to convert the stored hydrogen into electricity and can be used as electrodes for the fuel cells. In this review, we addressed the key strategies that could improve hydrogen storage properties for utilizing hydrogen as fuel and opportunities for further growth to meet energy demands.     

Construction of a structural equation model to identify public acceptance factors for hydrogen refueling stations under the provision of risk and safety information

Hydrogen refueling stations (HRSs) are an inevitable infrastructure for the utility of fuel cell vehicles; however, they can raise public safety concerns. The aim of this study is to establish a framework for public acceptance of HRSs in Japan upon the provision of risk and/or safety measure information on HRSs. We executed an in-person interview survey asking the respondents about their acceptance of HRSs and then constructed a structural equation model on HRS acceptance with four endogenous factors. The common factors to determine acceptability were “Dread” and “Independent”. “Balance” was added to the factors for the risk-informed group. If risk information was provided, people tended to judge based on their inherent sense of “Balance”; however, if it was not provided, their judgment was based on their intuitive “Dread” of HRSs or hydrogen. This study reveals risk perception characteristics and attempts to promote improved risk communication prior to HRS installation.     

Refueling-station costs for metal hydride storage tanks on board hydrogen fuel cell vehicles

Refueling costs account for much of the fuel cost for light-duty hydrogen fuel-cell electric vehicles. We estimate cost savings for hydrogen dispensing if metal hydride (MH) storage tanks are used on board instead of 700-bar tanks. We consider a low-temperature, low-enthalpy scenario and a high-temperature, high-enthalpy scenario to bracket the design space. The refueling costs are insensitive to most uncertainties. Uncertainties associated with the cooling duty, coolant pump pressure, heat exchanger (HX) fan, and HX operating time have little effect on cost. The largest sensitivities are to tank pressure and station labor. The cost of a full-service attendant, if the refueling interconnect were to prevent self-service, is the single largest cost uncertainty. MH scenarios achieve $0.71–$0.75/kg-H₂ savings by reducing compressor costs without incurring the cryogenics costs associated with cold-storage alternatives. Practical refueling station considerations are likely to affect the choice of the MH and tank design.     

A review of hydrogen usage in internal combustion engines (gasoline-Lpg-diesel) from combustion performance aspect

Demand for fossil fuels is increasing day by day with the increase in industrialization and energy demand in the world. For this reason, many countries are looking for alternative energy sources against this increasing energy demand. Hydrogen is an alternative fuel with high efficiency and superior properties. The development of hydrogen-powered vehicles in the transport sector is expected to reduce fuel consumption and air pollution from exhaust emissions. In this study, the use of hydrogen as a fuel in vehicles and the current experimental studies in the literature are examined and the results of using hydrogen as an additional fuel are investigated. The effects of hydrogen usage on engine performance and exhaust emissions as an additional fuel to internal combustion gasoline, diesel and LPG engines are explained. Depending on the amount of hydrogen added to the fuel system, the engine power and torque are increased at most on petrol engines, while they are decreased on LPG and diesel engines. In terms of chemical products, the emissions of harmful exhaust gases in gasoline and LPG engines are reduced, while some diesel engines increase nitrogen oxide levels. In addition, it is understood that there will be a positive effect on the environment, due to hydrogen usage in all engine types.     

Hydrogen production for energy: An overview

Power to hydrogen is a promising solution for storing variable Renewable Energy (RE) to achieve a 100% renewable and sustainable hydrogen economy. The hydrogen-based energy system (energy to hydrogen to energy) comprises four main stages; production, storage, safety and utilisation. The hydrogen-based energy system is presented as four corners (stages) of a square shaped integrated whole to demonstrate the interconnection and interdependency of these main stages. The hydrogen production pathway and specific technology selection are dependent on the type of energy and feedstock available as well as the end-use purity required. Hence, purification technologies are included in the production pathways for system integration, energy storage, utilisation or RE export. Hydrogen production pathways and associated technologies are reviewed in this paper for their interconnection and interdependence on the other corners of the hydrogen square.Despite hydrogen being zero-carbon-emission energy at the end-use point, it depends on the cleanness of the production pathway and the energy used to produce it. Thus, the guarantee of hydrogen origin is essential to consider hydrogen as clean energy. An innovative model is introduced as a hydrogen cleanness index coding for further investigation and development.     

The economic feasibility study of a 100-MW Power-to-Gas plant

Power-to-Gas (PtG) is a grid-scale energy storage technology by which electricity is converted into gas fuel as an energy carrier. PtG utilizes surplus renewable electricity to generate hydrogen from Solid-Oxide-Cell, and the hydrogen is then combined with CO₂ in the Sabatier process to produce the methane. The transportation of methane is mature and energy-efficient within the existing natural gas pipeline or town gas network. Additionally, it is ideal to make use of the reverse function of SOC, the Solid-Oxide-Fuel-Cell, to generate electricity when the grid is weak in power. This study estimated the cost of building a hypothetical 100-MW PtG power plant with energy storage and power generation capabilities. The emphasis is on the effects of SOC cost, fuel cost and capacity factor to the Levelized Cost of Energy of the PtG plant. The net present value of the plant is analyzed to estimate the lowest affordable contract price to secure a positive present value. Besides, the plant payback period and CO₂ emission are estimated.     

Techno-economic evaluation of hydrogen refueling stations with liquid or gaseous stored hydrogen

In this study, different hydrogen refueling station (HRS) architectures are analyzed energetically as well as economically for 2015 and 2050. For the energetic evaluation, the model published in Bauer et al. [1] is used and norm-fitting fuelings according to SAE J2601 [2] are applied. This model is extended to include an economic evaluation. The compressor (gaseous hydrogen) resp. pump (liquid hydrogen) throughput and maximum pressures and volumes of the cascaded high-pressure storage system vessels are dimensioned in a way to minimize lifecycle costs, including depreciation, capital commitment and electricity costs. Various station capacity sizes are derived and energy consumption is calculated for different ambient temperatures and different station utilizations. Investment costs and costs per fueling mass are calculated based on different station utilizations and an ambient temperature of +12 °C. In case of gaseous trucked-in hydrogen, a comparison between 5 MPa and 20 MPa low-pressure storage is conducted. For all station configurations and sizes, a medium-voltage grid connection is applied if the power load exceeds a certain limit. For stations with on-site production, the electric power load of the hydrogen production device (electrolyzer or gas reformer) is taken into account in terms of power load. Costs and energy consumption attributed to the production device are not considered in this study due to comparability to other station concepts. Therefore, grid connection costs are allocated to the fueling station part excluding the production device. The operational strategy of the production device is also considered as energy consumption of the subsequent compressor or pump and the required low-pressure storage are affected by it. All station concepts, liquid truck-supplied hydrogen as well as stations with gaseous truck-supplied or on-site produced hydrogen show a considerable cost reduction potential. Long-term specific hydrogen costs of large stations (6 dispensers) are 0.63 €/kg – 0.76 €/kg (dependent on configuration) for stations with gaseous stored hydrogen and 0.18 €/kg for stations with liquid stored hydrogen. The study focuses only on the refueling station and does not allow a statement about the overall cost-effectiveness of different pathways.     

A techno-economic study for a hydrogen storage system in a microgrid located in baja California,Mexico. Levelized cost of energy for power to gas to power scenarios

In this work a techno economic feasibility study is carried out to implement a Hydrogen based Power to Gas to Power (P2G2P) in a Microgrid, located in a rural area in Baja California, Mexico. The study aims to define the feasibility to store energy throughout seasons with this novel alternative using an electrolyzer to produce green hydrogen from excess renewable energy in winter, to store it during months and re inject it to the grid as electricity by a fuel cell in the high energy demanding season. The Microgrid was modeled in Homer software and simulations of the P2G2P lead to Levelized Cost of Energy data to compare between the P2G2P scenarios and the current diesel-battery based solution to complete the high demand by the community. This study shows that using hydrogen and fuel cells to substitute diesel generators it is possible to reduce CO₂ emissions up to a 27% and that in order for the P2G2P to be cost competitive, the fuel cell should reduce its cost in 50%; confirming that, in the medium to long term, the hydrogen storage system is a coherent alternative towards decarbonization of the distributed energy generation.     

Analysis of air conditioning system impact on a fuel cell vehicle performance based on a realistic model under actual urban conditions

In this study, a practical fuel cell vehicle considering the Heating, Ventilation, and Air conditioning system is considered to analyze hydrogen consumption under different working conditions. As a prevalent hydrogen-fueled vehicle, Toyota Mirai has been meticulously modeled in Simecenter Amesim software. The simulated model covers all of the vehicle's components with a concentration on Heating, Ventilation, and Air conditioning system. Since the air temperature and ‘weather conditions can significantly impact the vehicle's overall performance, various environmental conditions, including temperature variations, humidity, and varied solar fluxes, are taken into account. Furthermore, New York City is chosen as a densely populated megacity to simulate the dynamic behavior of the fuel cell vehicle under actual driving circumstances. The results illustrate that the Heating, Ventilation, and Air conditioning system can notably alter hydrogen consumption under real driving conditions. In this regard, turning on the Heating, Ventilation, and Air Conditioning system results in a 19% increase in fuel consumption. Moreover, the degradation phenomenon, which is a typical result of using fuel cell vehicles under urban driving conditions, impacts the vehicle's mileage and hydrogen consumption. The simulation results indicate that a fresh fuel cell stack consumes 80 g of hydrogen, while for 2500 and 5500 working hours fuel cells, the stack consumes 89.6 and 107 g of hydrogen, respectively. Based on the obtained results, a 33.75% increase in fuel consumption occurs by implementing a degraded fuel cell stack under real driving conditions.     

Hydrogen fuel cell heavy-duty trucks: Review of main research topics

Road transportation is a significant source of CO₂ emissions and energy demand. Consequently, initiatives are being promoted to decrease the sector's emissions and comply with the Paris agreement. This article synthesizes the available information about heavy-duty fuel cell trucks as their deployment needs to be considered a complementary solution to decreasing CO₂ emissions alongside battery electric vehicles. A thorough evaluation of 95 relevant documents determines that the main research topics in the past ten years converge on public policies, hydrogen supply chain, environmental impact, drivetrain technology, fuel cell, and storage tank applications. The identified research gaps relate to expanding collaboration between institutions and governments in developing joint green macro policies focused on hydrogen heavy-duty trucks, scarce research about hydrogen production energy sources, low interest in documenting hydrogen pilot projects, and minimal involvement of logistic companies, which need to plan their diesel freight's conversion as soon as possible.     

Hydrogen-powered vehicles for autonomous ride-hailing fleets

Autonomous ride-hailing fleets are approaching commercialization as an on-demand, low-cost transportation solution. Although battery electric vehicles (BEVs) are well-studied for this application, hydrogen fuel cell electric vehicles (FCEVs) may provide additional advantages that have not been sufficiently investigated. Here, we developed a stochastic ride-hailing autonomous vehicle (RHAV) model to compare these technologies and applied this model to seven BEVs and two FCEVs. FCEV fleets are 3–10% smaller than BEV fleets due to shorter refueling times and greater driving ranges, which enable greater fleet efficiency. The Hyundai Kona (BEV) provides the greatest fleet profitability; however, the Toyota Mirai (FCEV) is only 3% less profitable despite having a 25% higher purchase price. We demonstrate that FCEVs are economically competitive as RHAVs, and that expected price reductions can make them the most profitable technology. Furthermore, FCEV fleets provide qualitative benefits, including a substantial increase in local hydrogen demand to catalyze hydrogen infrastructure development.     

Development of a hydrogen impurity analyzer based on mobile-gas chromatography for online hydrogen fuel monitoring

Hydrogen is an excellent alternative energy source, particularly for vehicles. Despite the expansion of a considerable number of infrastructures, such as hydrogen refueling stations, there is a lack of efficient inspection methods for monitoring the hydrogen fuel quality. In this study, a hydrogen impurity analyzer (HIA) based on mobile gas chromatography with a thermal conductivity detector is developed and evaluated for the quality assurance of hydrogen fuel. Accordingly, O₂, N₂, and Ar which help in monitoring air leaks at hydrogen refueling stations, and CH₄, which can also be detected by HIA, are selected as target impurities. The HIA reached limits of detection of 2.93, 0.72, 0.84, and 1.54 μmol/mol for O₂, Ar, N₂, and CH₄, respectively. Moreover, the ISO 14687 requirements are satisfied with respective HIA expanded uncertainties of 2.6, 8.7, 8.2, and 9.4% (coverage factor k = 2). The developed system is ISO-compliant and offers enhanced mobility for online inspections.     

Clean hydrogen for mobility – Quo vadis?

Achieving complete combustion of fossil fuels has long been thought of as a sufficient remedy for tackling vehicular emissions and the ensuing environmental effects. However, thanks to the increasing awareness around the climate change, the global dialogue has now shifted to realizing a carbon-free economy, which has set stricter curbs on the energy source that can power the future mobility. Therefore, the idea of “clean combustion” requires rethinking. Of the many choices for alternative clean fuels that are both energy-efficient and environment-friendly, hydrogen has always been eyed as the best clean alternative there is. This article reviews various available approaches to utilizing hydrogen for mobility applications with a discussion of their relative merits and shortcomings. In addition to well-discussed methods like fuel cell electric vehicles, hydrogen-based IC engines, and dual-fuel operation with hydrogen, this review also assesses the technical and economic feasibilities of using hydrogen in e-fuels and their implications for our existing infrastructure and future energy demands.     

Exergetic analysis of hydrogen utilisation pathways – Part 1: Energy supply in buildings

This article analyses exergy losses along hydrogen utilisation pathways recently discussed in Germany and other countries. As a renewable fuel hydrogen will be an important part of sustainable future economies. Hydrogen can be used in all sectors, especially in buildings, for mobility and in industry, e.g. in steel production or ammonia synthesis. However, hydrogen has to be produced in a sustainable way. The most promising production is via water electrolysis using renewable electricity. In the first part of this work, exergy analysis is made for the complete hydrogen pathways from production until final utilisation for energy supply in buildings. The second part will focus on pathways for mobility. In the third part, the results are compared with available alternatives to hydrogen such as direct use of electricity in building supply or mobility. The results for building energy supply show that firstly transportation in pipelines (mixture with natural gas and pure hydrogen) is very efficient. Secondly, major exergy losses are caused by the electrolyser. Thirdly, combustion of renewable hydrogen for room heating in common boilers cause the highest exergy losses, but the use of combined heat and power (CHP) units or fuel cells can improve the exergy efficiency substantially.     

GIS-based analysis of rock salt deposits’ suitability for underground hydrogen storage

The paper discusses the suitability of bedded salt deposits for underground hydrogen storage facilities. The presented research is an example of multi-criteria decision analysis coupled with spatial data analysis undertaken using GIS (Geographic Information System). The aim of this study is to develop a methodology for selecting the best locations for hydrogen storage in salt caverns. In the analysis, we take into account the results of previous studies of the storage capacity of rock salt deposits. The presented methodology allows the creation of rock salt deposit suitability maps for underground hydrogen storage. The results show that the applied method significantly influences the resulting map image, helping to identify optimal locations for hydrogen storage facilities. The presented approach may be of value to governmental institutions considering underground hydrogen storage, geological services, power plants producing electricity from renewable energy sources, and chemical and petrochemical plants.     

On the economics of a hydrogen bus fleet powered by a wind park – A case study for Austria

This paper investigates the economics of a fuel cell bus fleet powered by hydrogen produced from electricity generated by a wind park in Austria. The main research question is to simultaneously identify the most economical hydrogen generation business model for the electric utility owning wind power plants and to evaluate the economics of operating a fuel cell bus fleet, with the core objective to minimize the total costs of the overall fuel supply (hydrogen production) and use (bus and operation) system. For that, three possible operation modes of the electrolyzer have been identified and the resulting hydrogen production costs calculated. Furthermore, an in-depth economic analysis of the fuel cell buses as well as the electrolyzer technology has been conducted. Results show that investment costs are the largest cost factor for both technologies. Thus, continuous hydrogen production with the smallest possible electrolyzer is the economically most favorable option. In such an operation mode (power grid), the costs of production per kg/H₂ were the lowest. However, this means that the electrolyzer cannot be solely operated with electricity from the wind park, but is also dependent on the electricity mix from the grid. For fuel cell buses, the future cost development will depend very much on the respective policies and funding programs for the market uptake, as to date, the total cost of use for the fuel cell bus is more than two times higher than the diesel bus. The major final conclusion of this paper is that to make fuel cell electric busses competitive in the next years today severe policy interferences, such as subsidies for these busses as well as electrolyzers and bans for fossil energy, along with investments in the setup of a hydrogen infrastructure, are necessary.     

Hydrogen production from phototrophic microorganisms: Reality and perspectives

Hydrogen is a promising alternative to fossil fuel for a source of clean energy due to its high energy content. Some strains of phototrophic microorganisms are known as important object of scientific research and they are being explored to raise biohydrogen (BioH₂) yield. BioH₂ is still not commonly used in industrial area because of the low biomass yield and valuable down streaming process. This article deals with the methods of the hydrogen production with the help of two large groups of phototrophic microorganisms – microalgae and cyanobacteria. Microalgal hydrogen is environmentally friendly alternative to conventional fossil fuels. Algal biomass has been considered as an attractive raw source for hydrogen production. Genetic modified strains of cyanobacteria are used as a perspective object for obtaining hydrogen. The modern photobioreactors and outdoor air systems have been used to obtain the biomass used for hydrogen production. At present time a variety of immobilization matrices and methods are being examined for their suitability to make immobilized H₂ producers.