Biogas (a promising bioenergy source): A critical review on the potential of biogas as a sustainable energy source for gaseous fuelled spark ignition engines

Increasing demand for energy accompanied by environmental concerns has raised the requirement for limiting the use of fossil fuels in energy generation and transportation applications. Among the green and renewable energy-based solutions, biogas is quite promising since it could be implemented for power generation applications (engines driving generators and pump sets) in rural areas, at domestic and industrial scales with lower capital investment and production cost by using the agricultural crop residues and other domestic biomass sources as raw materials. However, the composition of biogas varies depending on the raw materials, and higher concentration of carbon dioxide in biogas results in combustion variations affecting engine durability. This review focuses on the role of biogas in achieving sustainable development goals with an emphasis on its utilization in gaseous fuelled spark-ignited engines. Recent progress in biogas production and upgradation techniques are also detailed. Challenges related to the stability and characteristics of biogas fuelled spark-ignited engines could be addressed by either modifying the physical parameters of the engine or by enhancing the fuel quality (upgradation to biomethane or blending with hydrogen). A comprehensive review on the effects of these approaches on the performance, combustion, and emission characteristics of biogas-fuelled engines is discussed in detail with a note on engine operating parameters.     

Experimental investigation on biogas enrichment with hydrogen for improving the combustion in diesel engine operating under dual fuel mode

Biogas valorization as fuel for internal combustion engines is one of the alternative fuels, which could be an interesting way to cope the fossil fuel depletion and the current environmental degradation. In this circumstance, an experimental investigation is achieved on a single cylinder DI diesel engine running under dual fuel mode with a focus on the improvement of biogas/diesel fuel combustion by hydrogen enrichment. In the present investigation, the mixture of biogas, containing 70% CH₄ and 30% CO₂, is blended with the desired amount of H₂ (up to 10, 15 and 20% by volume) by using MTI 200 analytical instrument gas chromatograph, which flow thereafter towards the engine intake manifold and mix with the intake air. Depending on engine load conditions, the volumetric composition of the inducted gaseous fraction is 20–50% biogas, 2–10% H₂ and 45–78% air. Near the end of the compression stroke, a small amount of diesel pilot fuel is injected to initiate the combustion of the gas–air mixture. Firstly, the engine was tested on conventional diesel mode (baseline case) and then under dual fuel mode using the biogas. Consequently, hydrogen has partially enriched the biogas. Combustion characteristics, performance parameters and pollutant emissions were investigated in-depth and compared. The results have shown that biogas enriched with 20% H₂ leads to 20% decrease of methane content in the overall exhaust emissions, associated with an improvement in engine performance. The emission levels of unburned hydrocarbon (UHC) and carbon monoxide (CO) are decreased up to 25% and 30% respectively. When the equivalence ratio is increased, a supplement decrease in UHC and CO emissions is achieved up to 28% and 30% respectively when loading the engine at 60%.     

Combustion,performance and emission analysis of dual fuel engine using tsrb biogas

In this work, an experimental investigation has been carried out to reduce the emission and improve the performance and combustion characteristics of direct injection compression ignition (DICI) engine fuelled with diesel and biogas in dual fuel mode. The anaerobic digestion method was used to produce biogas from tamarind seed and rice bran (TSRB). The diesel is injected by conventional injector setup and the biogas is inducted through the intake manifold with air in different flow rates such as 0.25, 0.50, 0.75, and 1.0 kg/hr. The emission, combustion, and performance test is conducted with a different flow rate of biogas with diesel and compared with diesel. Results show that the smoke and Nox emissions are lowered by 7.1and 23.27%, respectively compared to diesel mode.     

Investigation of combustion and emission characteristics in a TBC diesel engine fuelled with CH4–CO2–H2 mixtures

In this study, an experimental investigation was performed to reveal combustion and emission characteristics of common-rail four-cylinder diesel engine run with CH₄, CO₂ and H₂ mixtures. The engine pistons were thermally coated with zirconia and Ni–Al bond coat by plasma spray method. With a small amount of the pilot diesel, port fuelled methane (100% CH₄), synthetic biogas (80% CH₄ + 20% CO₂), and hydrogen presented (80% CH₄+10% CO₂+10% H₂) mixtures were used as main fuel at different loads (50 Nm, 75 Nm, and 100 Nm) at a constant speed of 1750 min^?1. Comparative analysis of the combustion (cylinder pressure, PRR, HRR, CHR, ringing intensity, CA10, CA50, and CA90), BSFC, and emissions (CO₂, HC, NO_x, smoke, and oxygen) at the various engine loads with and without piston coating was made for all fuel combinations. It was found that coating the engine pistons enhanced the examining combustion characteristics, whereas it slightly changed BSFC and most of the emissions. As compared to the sole diesel fuel, the gaseous fuel operations showed higher in-cylinder pressure, PRR, and ringing intensity values, earlier combustion starting and CAs, and lower diesel injection pressure at the same engine operating conditions. Dramatic increase in the ringing intensity was particularly found by the hydrogen introduced mixture under the tests with coated piston. HC and CO₂ emissions increased in operation with the synthetic biogas; however, hydrogen introduction reduced HC emissions by 4.97–30.92%, and CO₂ emissions by 5.16–10%.     

An experimental investigation of exergetic performance and emission characteristics of hydrogen supplemented biogas-diesel dual fuel engine

An experimental investigation of a conventional diesel engine with diesel, biogas and hydrogen as fuels has been carried out, while the engine is modified to operate in dual fuel mode using diesel as the pilot fuel and biogas as the main fuel respectively. In order to improve the biogas-diesel dual fuel engine performance and emission characteristics, small percentages of hydrogen supplementations, viz. 5%, 10%, 15% and 20%, in biogas were studied and the comparison was also made to that with the neat biogas-diesel dual fuel operation. Engine performance characterization has been done with exergy based approach, and major sources of irreversibilities in various engine processes are also investigated and compared for the above mentioned cases. The results show that hydrogen supplementations in biogas have lesser effect on the combustion characteristics at low load, while, at high load, the combustion patterns change significantly with higher heat release rates and peak combustion pressures. Furthermore, performance and emission characteristics are found nearly unaffected with 5% of hydrogen addition both at low and high loads. Nevertheless, further addition of hydrogen in biogas causes improvements in performance and emission characteristics of the dual fuel engine.     

Effect of the turbulence intensity on knocking tendency in a SI engine with high compression ratio using biogas and blends with natural gas,propane and hydrogen

This research presents the test results carried out in a diesel engine converted to spark ignition (SI) using gaseous fuels, applying a geometry change of the pistons combustion chamber (GCPCC) to increase the turbulence intensity during the combustion process; with similar compression ratio (CR) of the original diesel engine; the increase in turbulence intensity was planned to rise turbulent flame speed of biogas, to compensate its low laminar flame speed. The research present the test to evaluate the effect of increase turbulence intensity on knocking tendency; using fuel blends of biogas with natural gas, propane and hydrogen; for each fuel blend the maximum output power was measured just into the knocking threshold before and after GCPCC; spark timing (ST) was adjusted for optimum generating efficiency at the knocking threshold. Turbulence intensity with GCPCC was estimated using Fluent 13, with 3D Combustion Fluid Dynamics (CFD) numerical simulations; 12 combustion chamber geometries were simulated in motoring conditions; the selected geometry had the greatest simulated turbulent kinetic energy (TKE) and Reynolds number (Re) during combustion. The increased turbulence intensity was measured indirectly through the periods of combustion duration to mass fraction burn 0–5%, 0–50% and 0–90%; for almost all the fuel blends the increased turbulence intensity of the engine, increased the knocking tendency requiring to reduce the maximum output power to keep engine operation just into the knocking threshold. Biogas was the only fuel without power derating by the conditions of higher pressure and higher turbulence during combustion by GCPCC and improve its generating efficiency. Peak pressure, heat release rate, mean effective pressure and exhaust temperature were lower after GCPCC. Tests results indicated that knocking tendency was increased because of the higher turbulent flame speed; fuel blends with high laminar flame speed and low methane number (MN) had higher knocking tendency and lower output power.     

Study of methane enrichment in a biogas fuelled HCCI engine

Biogas has been a promising alternative fuel for IC engines. However, its CO₂ content reduces calorific value and ignitability. The CO₂ fraction of raw biogas can be separated out by various techniques, which are collectively called methane enrichment. The present study explores the effect of methane enrichment on the output parameters of a Homogeneous Charge Compression Ignition (HCCI) engine. A single cylinder CI engine is altered for this purpose. Biogas (CH₄ + CO₂) is supplied along with air. Diethyl Ether (DEE) is used as the secondary fuel to initiate auto-ignition. The effects of injecting DEE at the inlet port and upstream in the intake manifold are also compared. Performance, emission and combustion characteristics such as brake thermal efficiency, equivalence ratio, HC, CO, CO₂, NO_x and smoke emissions, start and duration of combustion, in-cylinder pressure and maximum heat release rate are compared for operation with raw biogas (50% methane) and methane enriched biogas (100% methane) for various biogas flow rates and engine torques. Results show that methane enrichment enhances brake thermal efficiency by up to 2% compared to raw biogas. Methane enrichment advances and speeds up combustion. HC, CO and CO₂ emissions, maximum cylinder pressure and maximum heat release rate are also improved with methane enrichment. Ultra-low NO_x and smoke emissions can be obtained using raw biogas as well as methane enriched biogas. Low biogas flow rates provide better brake thermal efficiency and HC emissions. Manifold injection of DEE enhances brake thermal efficiency by up to 2% compared to port injection by virtue of greater mixture homogeneity.     

Comparison of the effects of EGR and lean burn on an SI engine fueled by hydrogen-enriched low calorific gas

A naturally aspirated spark ignition (SI) engine fueled by hydrogen-blended low calorific gas (LCG) was tested in both exhaust gas recirculation (EGR) and lean burn modes. The “dilution ratio” was introduced to compare their effects on engine performance and emissions under identical levels of dilution. LCG composed of 40% natural gas and 60% nitrogen was used as a main fuel, and hydrogen was blended with the LCG in volumes ranging from 0 to 20%. The engine test results demonstrated that EGR operations at stoichiometry showed a narrower dilution range, inferior combustion characteristics, lower brake thermal efficiency, faster nitrogen oxides (NO_x) suppression, and higher total hydrocarbon (THC) emissions for all hydrogen blending rates compared to lean burn. These trends were mainly due to the increased oxygen deficiency as a result of using EGR in LCG/air mixtures. Hydrogen enrichment of the LCG improved combustion stability and reduced THC emissions while increasing NO_x. In terms of efficiency, hydrogen addition induced a competition between combustion enhancement and increases in the cooling loss, so that the peak thermal efficiency occurred at 10% H₂ with excess air ratio of 1.5. The engine test results also indicated that a close-to-linear NO_x-efficiency relationship occurred for all hydrogen blending rates in both operations as long as stable combustion was achieved. NO_x versus combustion duration analysis showed that adding H₂ reduced combustion duration while maintaining the same level of NO_x. The methane fraction contained in the THC emissions decreased slightly with an increase in hydrogen enrichment at low EGR or excess air dilution ratios, but this tendency was diminished at higher dilution ratios because of the combined dilution effects from the inert gas in the LCG and the diluents (EGR or excess air).     

Experimental research on a blended hydrogen-fuel engine

An experimental study on the performance of a single cylinder engine fueled with hydrogen/gas fule blends was carried out. The performance of engine with different fuel components under the load characteristics of the engine was analyzed. The experimental results showed that with the increase of hydrogen blending ratio, the combustion speed was accelerated, and the maximum torque and maximum pressure in the cylinder were increased; The maximum torque of blended fuel with 40% CO₂ was 68.3% of that without CO₂; The maximum pressure in cylinder of blended fuel with 40% H₂ was 1.6 times higher than that without hydrogen; When the proportion of hydrogen was more than 30%, the torque decreased; When the mixture was blended with 30% N₂, the engine torque reached the maximum at the hydrogen ratio of 15%; With the increase of hydrogen blending ratio, the emission of CO increased and the emission of HC and NOx decreased; When the hydrogen blending ratio remained unchanged, the CO emission was the largest at medium load, the HC emission was the largest at small load, and the NOx emission was the largest at high load; When the mixture was blended with 15% H₂, with the increase of the proportion of nitrogen, emission of CO decreased, emissions of HC and NOx increased. The research of this paper provided an experimental basis for the design and development of gas fuel engines.     

Studies on the effect of hydrogen induction on performance,emission and combustion behaviour of a WCO emulsion based dual fuel engine

This paper aims at studying the effect of hydrogen induction on engine performance, emission and combustion behaviour of a diesel engine fuelled with the emulsion of used palm oil (called as WCO-waste cooking oil) as pilot fuel and hydrogen as primary fuel. A single cylinder water-cooled direct injection diesel engine was tested at 100% and 40% loads. Results were compared with neat diesel, neat WCO and WCO emulsion at both loads in single fuel operation. WCO emulsion in single fuel mode indicated improvement in performance and reduction in all emissions as compared to neat WCO. Dual fuel operation with hydrogen induction further reduced the emissions of smoke HC and CO with WCO as pilot fuel at all power outputs. However, hydrogen induction resulted in reduced thermal efficiency at 40% load. WCO emulsion showed higher ignition delay as compared to neat WCO. Dual fuel operation with hydrogen induction increased the ignition delay further. Heat release pattern showed higher premixed combustion rate with hydrogen induction mainly at high power outputs. Premixed combustion rate became very high at higher rates of hydrogen admission mainly at high power output. In general, hydrogen induction showed superior performance at high power output and inferior performance at low power output with WCO emulsion as injected fuel.     

Experimental study of engine performance and emissions for hydrogen diesel dual fuel engine with exhaust gas recirculation

With an alarming enlargement in vehicular density, there is a threat to the environment due to toxic emissions and depleting fossil fuel reserves across the globe. This has led to the perpetual exploration of clean energy resources to establish sustainable transportation. Researchers are continuously looking for the fuels with clean emission without compromising much on vehicular performance characteristics which has already been set by efficient diesel engines. Hydrogen seems to be a promising alternative fuel for its clean combustion, recyclability and enhanced engine performance. However, problems like high NOx emissions is seen as an exclusive threat to hydrogen fuelled engines. Exhaust gas recirculation (EGR), on the other hand, is known to overcome the aforementioned problem. Therefore, this study is conducted to study the combined effect of hydrogen addition and EGR on the dual fuelled compression ignition engine on a single cylinder diesel engine modified to incorporate manifold hydrogen injection and controlled EGR. The experiments are conducted for 25%, 50%, 75% and 100% loads with the hydrogen energy share (HES) of 0%, 10% and 30%. The EGR rate is controlled between 0%, 5% and 10%. With no substantial decrement in engine's brake thermal efficiency, high gains in terms of emissions are observed due to synergy between hydrogen addition and EGR. The cumulative reduction of 38.4%, 27.4%, 33.4%, 32.3% and 20% with 30% HES and 10% EGR is observed for NOx, CO2, CO, THC and PM, respectively. Hence, the combination of hydrogen addition and EGR is observed to be advantageous for overall emission reduction.     

Performance and emission characteristics of a SI engine fueled by low calorific biogas blended with hydrogen

In this study, an experimental investigation on a naturally aspirated (NA), 8-L spark ignition engine fueled by biogas with various methane concentrations - which we called the N₂ dilution test - was performed in terms of its thermal efficiency, combustion characteristics and emissions. The engine was operated at a constant engine rotational speed of 1800 rpm under a 60 kW power output condition and simulated biogas was employed to realize a wide range of changes in heating value and gas composition. The N₂ dilution test results show that an increase of inert gas in biogas was beneficial to thermal efficiency enhancement and NO_x emission reduction, while exacerbating THC emissions and cyclic variations. Then, as a way to achieve stable combustion for the lowest quality biogas, H₂ addition tests were carried out in various excess air ratios. H₂ fractions ranging from 5 to 30% were blended to the biogas and the effects of hydrogen addition on engine behavior were evaluated. The engine test results indicated that the addition of hydrogen improved in-cylinder combustion characteristics, extending lean operating limit as well as reducing THC emissions while elevating NO_x generation. In terms of efficiency, however, a competition between enhanced combustion stability and increased cooling energy loss was observed with a rise in H₂ concentration, maximizing engine efficiency at 5-10% H₂ concentration. Moreover, based on the peak efficiency operating point, a set of optimum operating conditions for minimum emissions with the least amount of efficiency loss was suggested in terms of excess air ratio, spark ignition timing, and hydrogen addition rate as one of the main results.     

High pressure direct injection of gaseous fuels using a discrete phase methodology for engine simulations

Direct gaseous fuel injection in internal combustion engines is a potential strategy for improving in-cylinder combustion processes, performance and emissions outputs and, in the case of hydrogen, could facilitate a transition away from fossil fuel usage. Computational fluid dynamic studies are required to fully understand and optimise the combustion process, however, the fine grids required to adequately model the underexpanded gas jets which tend to result from direct injection make this a difficult and cumbersome task. In this paper the gaseous sphere injection (GSI) model, which utilises the Lagrangian discrete phase model to represent the injected gas jet, is further improved to account for the variation in the jet core length with better estimation due to total pressure ratio change. The improved GSI model is then validated against experimental hydrogen and methane underexpanded freestream jet studies, mixing in a direct injection hydrogen spark ignition engine and combustion in a pilot ignited direct injection methane compression ignition engine. The improved GSI model performs reasonably well across all cases examined which cover various pressure ratios, injector diameters, injection conditions and disparate gases (hydrogen and methane) while also allowing for relatively coarse meshes (cheaper computational cost) to be used when compared to those needed for fully resolved modelling of the gaseous injection process. The improved GSI model should allow for efficient and accurate investigation of direct injection gaseous fuelled engines.     

Experimental study of using biogas in Pulse Detonation Engine with hydrogen enrichment

Pulse Detonation Engine (PDE) is one of the pressure gain engines that provide prominent features over conventional engines such as higher thermodynamic efficiency, higher thrust, and less design complexity. Biogas is one of the promising alternative energy sources. The aim of this paper is to study the influence of hydrogen addition in biogas on detonation characteristics performance of PDE. The ideal detonation combustion characteristics of biogas are estimated using NASA Chemical Equilibrium with Applications (CEA). The equivalence ratio range is varied from 0.7 to 1.4. It was found that the higher the percentage of methane concentration in biogas increased the detonation characteristics of biogas such as pressure, temperature, and Mach number. However, a reduction in the flame speed, temperature, and pressure of biogas compared to pure methane was stipulated to be due to the presence of CO2 that acts as a dilutant in biogas. It was found also that, the optimal percentage of hydrogen addition into the biogas fuel mixture is 15%. At this percentage, the detonation pressure improved by 23%. The performance of PDE fuelled by biogas is presented experimentally at a frequency of 10 Hz. The results show a successful and stable detonation initiation in PDE by using biogas with 15% and 20% addition of hydrogen.     

Effect of hydrogen addition on RCCI combustion of a heavy duty diesel engine fueled with landfill gas and diesel oil

The aim of this study is to investigate the effects of hydrogen addition on RCCI combustion of an engine running on landfill gas and diesel oil. A single cylinder heavy– duty diesel engine is set in operation at 9.4 bar IMEP. A certain amount of diesel fuel per cycle is fed into the engine and hydrogen is added to landfill gas while keeping fixed fuel energy content. The developed simulation results confirm that hydrogen addition which is the most environmental friendly fuel causes the fuel consumption per any cycle to reduce. Also, the peak pressure is increased while the engine load is reduced up to 4%. Landfill gas which is enriched with hydrogen improves the rate of methane dissociation and reduces the combustion duration at the same time the engine operation would not be exposed to diesel knock. Moreover, hydrogen addition to landfill gas would reduce engine emissions considerably.     

Influence of operating parameters on performance and emissions for a compression-ignition engine fueled by hydrogen/diesel mixtures

Hydrocarbon exhaust emissions are mainly recognized as a consequent of carbon-based fuel combustion in compression ignition (CI) engines. Alternative fuels can be coupled with hydrocarbon fuels to control the pollutant emissions and improve the engine performance. In this study, different parameters that influence the engine performance and emissions are illustrated with more details. This numerical work was carried out on a dual-fuel CI engine to study its performance and emission characteristics at different hydrogen energy ratios. The simulation model was run with diesel as injected fuel and hydrogen, along with air, as inducted fuel. Three-dimensional CFD software for numerical simulations was implemented to simulate the direct-injection CI engine. A reduced-reaction mechanism for n-heptane was considered in this work instead of diesel. The Hiroyasu-Nagel model was presented to examine the rate of soot formation inside the cylinder. This work investigates the effect of hydrogen variation on output efficiency, ignition delay, and emissions. More hydrogen present inside the engine cylinder led to lower soot emissions, higher thermal efficiency, and higher NO_x emissions. Ignition timing delayed as the hydrogen rate increased, due to a delay in OH radical formation. Strategies such as an exhaust gas recirculation (EGR) method and diesel injection timing were considered as well, due to their potential effects on the engine outputs. The relationship among the engine outputs and the operation conditions were also considered.     

Development of online control system for elimination of backfire in a hydrogen fuelled spark ignition engine

Backfire is one of the major technical issues in a port injection type hydrogen fuelled spark ignition engine. It is an abnormal combustion phenomenon (pre-ignition) that takes place in combustion chamber and intake manifold during suction stroke. The flame propagates toward the upstream of the intake manifold from combustion chamber during backfire and thus can damage the intake and fuel supply systems of the engine, and stall the engine operation. The main cause of backfire could be the presence of any hot spot, lubricating oil particle's traces (HC and CO due to evaporation of the oil) and hot residual exhaust gas present in the combustion chamber during suction stroke which could act as an ignition source for fresh incoming charge. Monitoring the temperatures of the lubricating oil and exhaust gas during engine operation can reduce the probability of backfire. This was achieved by developing an electronic device which delays the injection timing of hydrogen fuel with the inputs of engine oil temperature (T_{lube oil}) and exhaust gas temperature (T_exh). It was observed from the experimental results that the threshold values of T_{lube oil} and T_exh were 85 °C and 540 °C respectively beyond which backfire occurred at equivalence ratio (φ) of 0.82. The developed device works based on the algorithm that retards the hydrogen injection to 40 ⁰aTDC whenever the temperatures (T_{lube oil} and T_exh) reached to the above mentioned values and thus the backfire was controlled. Delaying injection of hydrogen increased the time period at which only air is inducted during the early part of the suction stroke, this allows cooling of the available hot spots in the combustion chamber, hence the probability of backfire would be reduced.     

CFD analysis of hydrogen injection pressure and valve profile law effects on backfire and pre-ignition phenomena in hydrogen-diesel dual fuel engine

This paper focuses on optimizing the hydrogen TMI (timed manifold injection) system through valve lift law and hydrogen injection parameters (pressure, injection inclination and timing) in order to prevent backfire phenomena and improve the volumetric efficiency and mixture formation quality of a dual fuel diesel engine operating at high load and high hydrogen energy share. This was achieved through a numerical simulation using CFD code ANSYS Fluent, developed for a single cylinder hydrogen-diesel dual fuel engine, at constant engine speed of 1500 rpm, 90% of load and 42.5% hydrogen energy share. The developed tool was validated using experimental data. As a results, the operating conditions of maximum valve lift = 10.60 mm and inlet valve closing = 30 °CA ABDC (MVL10 IVC30) prevent the engine from backfire and pre-ignition, and ensure a high volumetric efficiency. Moreover, a hydrogen start of injection of 60 °CA ATDC (HSOI60) is appropriate to provide a pre-cooling effect and thus, reduce the pre-ignition sources and helps to quench any hot residual combustion products. While, the hydrogen injection pressure of 2.7 bar and an inclination of 60°, stimulate a better quality of hydrogen-air mixture. Afterwards, a comparison between combustion characteristics of the optimized hydrogen-diesel dual fuel mode and the baseline (diesel mode) was conducted. The result was, under dual fuel mode there is an increase in combustion characteristics and NOx emissions as well as a decrease in CO2 emissions. For further improvement of dual fuel mode, retarding diesel start of injection (DSOI) strategy was used.     

Effect of hydrogen enrichment in the intake air of diesel engine fuelled with honge biodiesel blend and diesel

In the current investigation, the enrichment of hydrogen with the honge biodiesel blend and diesel is used in a compression ignition engine. The biodiesel is derived from the honge oil and mixed with diesel fuel by 20% (v/v). Thereafter, hydrogen at different volume flow rates (10 and 13 lpm) is introduced into the intake manifold. The outcomes by enrichment of hydrogen on the performance, combustion and emission characteristics are investigated by examining the brake thermal efficiency, fuel consumption, HC, CO, CO₂, NOₓ emissions, in-cylinder pressure, combustion duration, and rate of heat release. The engine fuelled with honge biodiesel blend is found to enhance the thermal efficiency, combustion characteristics. Compare to diesel, the BTE increased by 2.2% and 6% less fuel consumption for the HB20 + 13H₂ blend. Further, reduction in the emission of exhausts gases like CO and HC by 21% and 24%, respectively, are obtained. This is due to carbon-free structure in hydrogen. Moreover, due to high pressure in the cylinder, there is a slight increase in oxides of nitrogen emission compare to diesel. The combustion characteristics such as rate of heat release, combustion duration, and maximum ₂rate of pressure rise and in-cylinder pressure are high due to hydrogen.     

Analysis of different combustion chamber geometries using hydrogen / diesel fuel in a diesel engine

ABSTRACT

In this study, the effects on combustion characteristics and emission were investigated in a direct injection diesel engine. In experimental and numerical studies, the engine was operated at 2000 rpm. The analyzes were made in the AVL-FIRE ESE Diesel part with Computational Fluid Dynamics (CFD) software. Standard combustion chamber (SCC) and Modified combustion chamber (MCC) geometry were compared in the modeling. By means of the designed MCC combustion chamber geometry, the fuel released from the injector was directed to the piston bowl area. Therefore, the mixture was homogenized and the combustion had been improved. In addition, the evaporation rate of the mixture increased with the MCC geometry. Also, lower NO and CO emissions were obtained with the MCC model compared to the SCC model. On the other hand, diesel fuel and mass 5% hydrogen fuel was used into diesel fuel as fuel in the study. The combustion process was investigated using hydrogen in different combustion chambers. The use of hydrogen as additional fuel resulted in higher combustion pressure, temperature and NO emissions. Compared to SCC type combustion chamber in the MCC type combustion chamber used diesel fuel, CO emission decreased of 6% and 3% for hydrogen-added mixture fuel. Also, compared to SCC type combustion chamber in the MCC type combustion chamber used diesel fuel, NO emission decreased of 11% and 32% for hydrogen-added mixture fuel. Moreover, flame velocity, heat release rate and flame propagation increased with the addition of hydrogen fuel.