Engineering of molybdenum sulfide nanostructures towards efficient electrocatalytic hydrogen evolution

Water splitting is an appealing way of producing hydrogen fuel, which requires efficient and affordable electrode materials to make the overall process viable. In the last couple years, abundant transition metals (and their compounds and hybrids) attracted ever-growing attention as the alternatives of noble metals. Particularly the layered transition metal dichalcogenide (TMDs) are interesting with their stability and promising electrocatalytic performance for hydrogen evolution reaction (HER). However, the neat TMDs are often poor in terms of the abundance of catalytically active sites and electrical conductivity, which limit their application potential significantly. Herein, as a proof-of-concept, we report on the design of a high-performance electrocatalyst system formed by the decoration of ultrasmall molybdenum sulfide (MoS₂) nanosheets on carbon nanotubes (CNTs). The ultrasmall MoS₂ nanosheets provide distorted lattice, confined size and rich defects, which endows the resulting electrocatalysts (MoS₂/CNT) with abundant active sites. The CNTs, on the other hand, serve as the conductive net for ensuring electrocatalytic performance. As a result, the hybrid electrocatalyst exhibits excellent electrocatalytic performance for HER, achieving a large current density of 100 mA cm⁻² at overpotential of only 281 mV and a small Tafel slope of 43.6 mV dec⁻¹ along with a decent stability. Our results are of high interest for electrocatalyst technologists as well as hydrogen fuel researchers.     

Electrochemically assisted synthesis of three-dimensional FeP nanosheets to achieve high electrocatalytic activity for hydrogen evolution reaction

Iron phosphide (FeP) is a promising alternative catalyst for electrocatalytic hydrogen evolution reaction (HER) due to its low price, highly active catalytic sites and long-term anti-acid corrosion. Herein, we report a very facile strategy to fabricate novel FeP nanosheets as a HER electrocatalyst. Three-dimensional interconnected nanosheet structures of Fe₂O₃ (3D Fe₂O₃ NS) were directly exfoliated from metal Fe wires by alternating current (AC) voltage disturbance, and a simple subsequent phosphorization process could easily convert γ-Fe₂O₃ into FeP phase, which also maintained the 3D NS structure. Importantly, increasing the AC voltage resulted in the evolution of iron-containing nanostructures from nanoparticles to 2D nanosheets until the formation of 3D NS structure. Owing to the large specific surface area, enriched active sites and abundant hierarchical porous channels, as-prepared 3D FeP NS has exhibited significantly enhanced electrocatalytic HER activities such as a cathode current density of 10 mA cm⁻² at a small overpotential of 88 mV, low Tafel slope (47.7 mV dec⁻¹) and satisfactory long-term stability in acidic electrolyte. We expect that this simple and green synthetic strategy of transition metal phosphides will provide a promising prospect to innovate nonprecious HER electrocatalysts.     

Ti3C2Tx nanosheets with uniformly anchored Ru nanoparticles for efficient acidic and basic hydrogen evolution reaction

Developing an efficient and stable electrocatalyst for hydrogen evolution reaction (HER) remains critically signi?cance for renewable hydrogen production. Herein, a facile electrochemical reduction method was proposed to fabricate Ru nanoparticles (NPs) evenly anchored on Ti₃C₂T_x nanosheets (Ti₃C₂T_x-NS) electrocatalyst (Ru@Ti₃C₂T_x-NS). Interestingly, owing to the interaction between Ru NPs and Ti₃C₂T_x-NS, the resultant Ru@Ti₃C₂T_x-NS electrocatalyst performed a Pt-like electrocatalytic property for HER under the acidic solution with an ultra-low overpotential of 46.75 mV to reach ?10 mA/cm², a small Tafel slope of 30.6 mV/dec, and long-term stability. Simultaneously, the Ru@Ti₃C₂T_x-NS also displayed splendid HER electrocatalytic performance in the basic condition. Furthermore, Ru@Ti₃C₂T_x-NS showed a lower value of Gibbs free energy for HER (?0.21 eV) than either pure Ru or Ti₃C₂T_x-NS from the theoretical calculation results. It is expected that such a promising approach would be extended to design and fabricate other noble metal NPs anchored MXene nanosheets for HER application.     

Graphene confined MoS2 particles for accelerated electrocatalytic hydrogen evolution

MoS₂ is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction. Extensive trials have been carried out to increase its low electrical conductivity and insufficient active sites. Here, a remarkable electrocatalyst for hydrogen evolution is developed based on the in-situ preparation of MoS₂ confined in graphene nanosheets. Graphene effectively controls the growth of MoS₂ and immensely increases the conductivity and structural stability of the composite materials. Remarkably, because of the plentiful active sites, sufficient electrical contact and transport, MoS₂ particles confined in graphene nanosheets exhibit an onset overpotential as small as 32 mV, an overpotential approaching 132 mV at 10 mA cm⁻², and a low Tafel slope of 45 mV dec⁻¹. This work presents a reasonable architecture for practical applications in efficient electrocatalytic H₂ generation.     

Bismuth tungstate-anchored PEDOT: PSS materials for high performance HER electrocatalyst

Bismuth tungstate anchored PEDOT: PSS (BiW@PEPS) electrocatalyst was prepared via hydrothermal and ultrasonication methods successively. The synergetic effects of bismuth tungstate with PEDOT: PSS conducting polymer showed excellent electrocatalytic performance of hydrogen evolution reactions (HER) in alkaline conditions. When compared with pristine bismuth tungstate, the BiW@PEPS exhibited an enhanced electrocatalytic activity with a lower overpotential of 361 mV at 10 mA cm⁻², small Tafel slope of 106 mV/dec and enduring stability in 1 M KOH electrolyte. The enhanced electrocatalytic performance of the BiW@PEPS proved to be a beneficial electrocatalyst to the high-cost platinum-based materials in hydrogen production applications.     

One-step facile hydrothermal synthesis of rGO-CoS2 nanocomposites for high performance HER electrocatalysts

With increasing demand for green and clean energy, the research community moves toward electrocatalytic hydrogen production. Herein, we synthesized the reduced graphene oxide decorated-cobalt disulfide (rGO-CoS₂) nanocomposites via the one-step facile hydrothermal method and investigated their excellent hydrogen evolution reaction (HER) activities. The rGO-CoS₂ nanocomposites showed an aggregated structure of spherical CoS₂ nanoparticles interconnected along with GO nanosheets. The rGO-CoS₂ nanocomposites exhibited a low overpotential of 377 mV and a small Tafel slope of 121 mV/dec. This work delivers a prospective scheme for developing the high efficient rGO-CoS₂ electrocatalysts for future green energy technology in hydrogen production.     

Electrodeposited Ni-Co-Sn alloy as a highly efficient electrocatalyst for water splitting

Water splitting to produce hydrogen and oxygen is considered as a feasible solution to solve the current energy crisis. It is highly desirable to develop inexpensive and efficient electrocatalyst for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this paper, nanostructured Ni-Co-Sn alloys were electrodeposited on copper foil and the excellent electrocatalytic performances for both HER and OER in alkaline media were achieved. The optimized Ni-Co-Sn electrode shows a low onset overpotential of −18 mV and a small Tafel slope of 63 mV/dec for the HER, comparable to many state-of-the-art non-precious metal HER catalysts. For the OER, it produces an overpotential of 270 mV (1.50 V vs. RHE) at current density of 10 mA/cm², which is better than that of the commercial Ir/C catalyst. In addition to high electrocatalytic activities, it exhibits good stability for both HER and OER. This is the first report that Ni-Co-Sn is served as a cost-effective and highly efficient bifunctional catalyst for water splitting and it will be of great practical value.     

Accessible active sites activated by nano cobalt antimony oxide @ carbon nanotube composite electrocatalyst for highly enhanced hydrogen evolution reaction

The electrochemical hydrogen evolution reaction (HER) was one of new energy development strategies with clean, efficient and renewable characteristics, and electrocatalysts play a crucial role in HER technology. Herein, a composite material (CSO@0.5CNT) derived from the combination of nano cobalt antimony oxide (CSO) with carbon nanotubes (CNT) through hydrothermal reaction, in which the nanoparticles of CSO were closely compounded on the surface of CNT, could be a highly efficient electrocatalyst for HER in 1 M KOH. The binary composite electrocatalyst of CSO and CNT reduced the internal resistance, promoted the charge transfer, exhibited a large electrochemical active area, and obtained the lower overpotential, with 155 mV at 10 mA/cm² current density. Moreover, such a CSO@0.5CNT electrocatalyst displayed a small Tafel slope of 86.5 mV dec^?1, excellent catalytic activity and extraordinary long-term structural stability after 30 h and 3000 CV cycles. Furthermore, the electrocatalytic mechanism revealed by Density Functional Theory (DFT) calculation proved that, the decomposition of H₂O molecules was the control step of the whole HER, and the superior electron transport ability of CNT was favorable to the improvement of electrocatalytic performance. Benefitting from accessible active sites on carbon nanotube (C atom) and CSO (Co atom), the composite electrocatalyst of CSO@0.5CNT displayed synergistic effect for electrocatalytic HER properties, and that was the main mechanism for significantly improving the electrocatalytic activities. Our work provides a novel strategy towards high-efficiency electrocatalysts for hydrogen evolution reaction.     

Three-dimensional interconnected MoS2 nanosheets on industrial 316L stainless steel mesh as an efficient hydrogen evolution electrode

The development of inexpensive and competent electrocatalysts for high-efficiency hydrogen evolution reaction (HER) has been greatly significant to realize hydrogen production in large scale. In this paper, we selected the inexpensive and commercially accessible stainless steel as the conductive substrate for loading MoS₂ as a cathode for efficient HER under alkaline condition. Interconnected MoS₂ nanosheets were grown uniformly on 316-type stainless steel meshes with different mesh numbers via a facile hydrothermal way. And the optimized MoS₂/stainless steel electrocatalysts exhibited superior electrocatalytic performance for HER with a low overpotential of 160 mV at 10 mA cm⁻² and a small Tafel slope of 61 mV dec⁻¹ in 1 M KOH. Systematic study of the electrochemical properties was performed on the MoS₂/stainless steel electrocatalysts in comparison with the commonly used carbon cloth to better comprehend the origin of the superior HER performance as well as stability. By collaborative optimization of MoS₂ nanosheets and the cheap stainless steel substrate, the interconnected MoS₂ nanosheets on stainless steel provide an alternative strategy for the development of efficient and robust HER catalysts in strong alkaline environment.     

Nanoengineered Zn-modified Nickel Sulfide (NiS) as a bifunctional electrocatalyst for overall water splitting

Developing an efficient and inexpensive electrocatalyst is of paramount importance for realizing the green hydrogen economy through electrocatalytic water splitting. Here, we demonstrated a facile large-scale, industrially viable binder-free synthesis of Zn-doped NiS electrocatalyst on bare nickel foam (NF) through a hydrothermal technique. The present catalyst, i.e., nickel sulfide (NiS) nanosheets on nickel foam with optimized doping of Zn atom (Zn–NiS-3), displays excellent catalytic efficacy for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). It requires an overpotential of 320 mV for OER at a current density of 50 mA cm⁻² and an overpotential of 208 mV for HER at a current density of 10 mA cm⁻². The water electrolyser device having Zn–NiS-3 electrocatalyst as both cathode and anode show excellent performance, requiring a cell voltage of only 1.71 V to reach a current density of 10 mA cm⁻² in an alkaline media. The density functional theory (DFT) based calculations showed enhanced density of states near Fermi energy after Zn doping in NiS and attributed to the enhanced catalytic activities. Thus, the present study demonstrates that Zn–NiS-3@NF can be coined as a viable electrocatalyst for green hydrogen production.     

Combustion-derived BaNiO3 nanoparticles as a potential bifunctional electrocatalyst for overall water splitting

Electrochemical water electrolyser though an assuring solution for clean hydrogen production, the sluggish kinetics and high cost of existing precious metal electrocatalyst remains a barrier to its effective utilization. Herein, solution combustion route derived perovskite type barium nickelate (BaNiO₃) nanoparticles were developed and studied for their bifunctional electrocatalytic properties towards overall water splitting. The unannealed BaNiO₃ nanoparticles exhibited the highest OER and HER activity with overpotentials 253 mV and 427 mV respectively to attain 10 mAcm⁻² in 1.0 M KOH. Using unannealed BaNiO₃ as a bifunctional electrocatalyst in a two-electrode alkaline electrolyser, the cell was able to achieve the benchmark current density at a low cell voltage of 1.82 V. Impressively the setup's electrocatalytic performance improved 4.9% after continuous overall water splitting for 24 h at 30 mAcm⁻². Therefore, BaNiO₃ nanoparticles can be a low-cost and efficient alternative for noble metal electrocatalysts for clean H₂ production.     

Transition metal doped MoS2 nanosheets for electrocatalytic hydrogen evolution reaction

In the present work, the effect of transition metals (Ni, Fe, Co) doping on 2-dimensional (2D) molybdenum disulfide (MoS₂) nanosheets for electrocatalytic hydrogen evolution reaction (HER) was explored. A simple and cost-effective hydrothermal method was adopted to synthesis transition metals doped MoS₂ nanosheets. The morphological and spectroscopic studies evidence the formation of high-quality MoS₂ nanosheets with the randomly doped metal ions. Notably, the Ni–MoS₂ displayed superior HER performance with an overpotential of ?0.302 V vs. reversible hydrogen electrode (RHE) (to attain the current density of 10 mA cm^?2) as compared to the other transition metals doped MoS₂ (Co–MoS₂, Fe–MoS₂). From the Nyquist plot, superior charge transport from the electrocatalyst to the electrolyte in Ni–MoS₂ was realized and confirmed that Ni doping provides the necessary catalytic active sites for rapid hydrogen production. The stable performance was confirmed with the cyclic test and chronoamperometry measurement and envisaged that hydrothermally synthesized Ni–MoS₂ is a highly desirable cost-effective approach for electrocatalytic hydrogen generation.     

Facile hydrothermal synthesis of rare earth phosphate for boosting hydrogen evolution reaction

The water electrolysis process has attracted great attention due to the production of high energy density pure hydrogen. However, the involved cell reactions in this process such as hydrogen and oxygen evolution reactions are kinetically sluggish and demands high input energy to accelerate the rate of these reactions. Therefore, the development and application of efficient electrocatalyst is essential for hydrogen evolution reaction (HER) as well as oxygen evolution reaction (OER). In the present work, we have successfully synthesized two rare earth phosphates through the hydrothermal route and used as a catalysts towards HER in an acidic medium. The rare earth phosphate PrPO₄ exhibits better catalytic activity than YPO₄ catalyst. The overpotential of PrPO₄, YPO₄ and standard Pt/C were found as 147, 484.3 and 58 mV vs. reversible hydrogen electrode, respectively, to reach current density 10 mA·cm^?2 and corresponding Tafel slopes were found as 107.58, 118.73 and 80.89 mV decade^?1, respectively in 0.5 M H₂SO₄. The catalytic activity of PrPO₄ (472.83 mA·cm^?2) overcome standard Pt/C (179.60 mA·cm^?2) at high overpotential 450 mV vs. reversible hydrogen electrode. The prepared PrPO₄ shows efficient electrocatalytic activity towards HER in acidic medium because it possess high BET surface area, large ECSA value and small charge transfer resistance than YPO₄.     

Hierarchical ZnS@C@MoS2 core-shell nanostructures as efficient hydrogen evolution electrocatalyst for alkaline water electrolysis

Low-cost and highly efficient electrocatalysts are critical to advance the hydrogen production industry via water electrolysis in alkaline media. Molybdenum disulfide (MoS₂) nanosheets as earth-abundant electrocatalyst became a star material due to its unique graphene-like layered structure favoring electron transfer for hydrogen evolution catalysis. However, its electrocatalytic activities greatly hindered by the poor conductivity and the fewer exposure of catalytically active edged sites. Herein, hierarchical ZnS@C@MoS₂ core-shell nanostructures were designed by using a bottom-up strategy combined with a simple selective etching. The coexistence of semiconductor ZnS and defective porous carbonaceous shell as the core not only enhanced the electrical conductivity, but also separated and loaded the exfoliated MoS₂ nanosheets which effectively proliferated the exposed catalytically active edge sites (Mo and S sites). Upon optimal conditions, hierarchical ZnS@C@MoS₂ core-shell nanostructures gave an overpotential of 118 mV at 10 mA/cm² with a Tafel slope value of 55.4 mV/dec and better cycling stability after 500 cycles during the alkaline HER process, superior to pristine MoS₂.     

Accelerate the alkaline hydrogen evolution reaction of the heterostructural Ni2P@Ni(OH)2/NF by dispersing a trifle of Ru on the surface

Electrocatalytic water splitting for hydrogen production plays a vital role in the development of new energy field, but there is still a lack of low-content precious metal or cost-effective non-noble metal catalysts for the hydrogen evolution reaction (HER). Therefore, how to develop the catalysts with a smaller amount of precious metal to achieve higher performance is still a major challenge. Herein, we have fabricated Ru–Ni₂P@Ni(OH)₂/NF-2 heterostructure by phosphating Ni(OH)₂/NF and then anchoring Ru on the surface through wet chemical strategy. Benefiting from its optimal ΔG_H1 and synergistic effect, this Ru–Ni₂P@Ni(OH)₂/NF-2 catalyst shows superior electrocatalytic HER kinetics in alkaline electrolyte. A small overpotential of 31 mV is needed for this electrocatalyst to obtain the current densities of 10 mA cm^?2 with remarkable durability over 24 h. This work provides a new strategy for the preparation of effective HER electrocatalyst with a low precious metal content.     

Facile construction of porous and heterostructured molybdenum nitride/carbide nanobelt arrays for large current hydrogen evolution reaction

The development of cost-effective, highly efficient and stable electrocatalysts for alkaline water electrolysis at a large current density has attracted considerable attention. Herein, we reported a one-dimensional (1D) porous Mo₂C/Mo₂N heterostructured electrocatalyst on carbon cloth as robust electrode for large current hydrogen evolution reaction (HER). The MoO₃ nanobelt arrays and urea were used as the metal and non-metal sources to fabricate the electrocatalyst by one-step thermal reaction. Due to the in-situ formed abundant high active interfaces and porous structure, the Mo₂C/Mo₂N electrocatalyst shows enhanced HER activity and kinetics, as exemplified by low overpotentials of 54, 73, and 96 mV at a current density of 10 mA cm^?2 and small Tafel slopes of 48, 59 and 60 mV dec^?1 in alkaline, neutral and acid media, respectively. Furthermore, the optimal Mo₂C/Mo₂N catalyst only requires a low overpotential of 290 mV to reach a large current density of 500 mA cm^?2 in alkaline media, which is superior to commercial Pt/C catalyst (368 mV) and better than those of recently reported Mo-based electrocatalysts. This work paves a facile strategy to construct highly efficient and low-cost electrocatalyst for water splitting, which could be extended to fabricate other heterostructured electrocatalyst for electrocatalysis and energy conversion.     

MOF-derived Zn,S, and P co-doped nitrogen-enriched carbon as an efficient electrocatalyst for hydrogen evolution reaction

In this study, Zn, S, and P co-doped nitrogen N-enriched carbon (ZnSP/NC) was successfully fabricated as an efficient electrocatalyst for the hydrogen evolution reaction (HER) process via pyrolysis, sulfurization, and phosphorization. The metal Zn derived from zeolitic imidazolate framework-8 (ZIF-8) was combined with the S element to form ZnS nanoparticles, and then embedded in N-enriched carbon during the sulfurization process. Following this, the P element was well-dispersed in the catalyst via phosphorization. It was found that ZnSP/NC exhibits excellent electrocatalytic activity when used as a catalyst for the HER process. ZnSP/NC, with an overpotential of 171 mV and a Tafel slope of 54.78 mV dec⁻¹, demonstrates superior electrocatalytic activity as compared to Zn/NC (277 mV, 92.34 mV dec⁻¹) and ZnS/NC (241 mV, 76.41 mV dec⁻¹). During the HER process, ZnS and P serve as active sites, while the N-enriched carbon provides reliable electronic transmission. The synergistic effects among the ZnS, P, and N-enriched carbon result in an excellent electrocatalytic activity of ZnSP/NC for the HER process.     

N-doped graphene supported W2C/WC as efficient electrocatalyst for hydrogen evolution reaction

Tungsten carbides (W₂C and WC) materials, as promising non-precious electrocatalysts, possess highly efficient activity for HER. Herein, N-doped graphene supported tungsten carbide (N–W₂C/WC) nanocomposite is synthesized by spray drying process followed with a two-step pyrolysis treatment, which exhibits a remarkable hydrogen evolution reaction (HER) activity and excellent stability in acidic solution and alkaline solution. N–W₂C/WC displays low overpotentials of 166 mV and 125 mV to achieve a current density of 10 mA cm^?2 and small Tafel slopes of 60.97 and 62.66 mV dec^?1 in 0.5 M H₂SO₄ and 1.0 M KOH, respectively. After 1000 cycles, the electrocatalytic activity of N–W₂C/WC is almost no change in acidic media but slightly decreases in alkaline media. This work might provide a new way to explore high comprehensive performance tungsten-based electrocatalyst for HER.     

Metal-organic frameworks derived self-supported Ni2P nanorod arrays for electrocatalytic hydrogen evolution

The development of efficient and low-cost electrocatalysts for hydrogen evolution reaction (HER) is of importance. Herein, we demonstrate a self-supported Ni₂P nanostructure with nanorod arrays morphology, fabricated by directly growing metal-organic frameworks (MOFs) on the commercial nickel foam prior to phosphorization treatment, as an electrocatalyst for HER. This electrocatalyst exhibits remarkable electrocatalytic HER activity in an alkaline electrolyte, affording current densities of 10 and 100 mA cm^?2 at the overpotentials of 120 and 168 mV, respectively, accompanied with a low Tafel slope of 37 mV dec^?1. Furthermore, this electrocatalyst shows a current density of 105 mA cm^?2, and this current density can be retained for more than 20 h, suggesting its superior stability. This remarkable HER performance is believed a result of superiority for its structural integrality and mechanical stability.     

Structural engineering of hierarchically hetestructured Mo2C/Co conformally embedded in carbon for efficient water splitting

Developing low-cost and high efficient electrocatalysts for both oxygen and hydrogen evolution reaction in an alkaline electrolyte toward overall water splitting is still a significant challenge. Here, a novel hierarchically heterostructured catalyst composed of ultrasmall Mo₂C and metallic Co nanoparticles confined within a carbon layer is produced by a facile phase separation strategy. During thermal reduction of CoMoO₄ nanosheets in CO ambient, in-situ generated nanoscale Co and ultrafine Mo₂C conformally encapsulated in a conductive carbon layer. In addition, some carbon nanotubes catalyzed by Co nanoparticles vertically grew on its surface, creating 3D interconnected electron channels. More importantly, the integrated C@Mo₂C/Co nanosheets assembled into the hierarchical architecture, providing abundant active surface and retaining the structural integrity. Benefiting from such unique structure, the constructed hierarchical heterostructure shows low overpotentials of 280 mV and 145 mV to reach a current density of 10 mA cm⁻² for OER and HER in an alkaline electrolyte. Furthermore, the symmetrical electrolyzer assembled with catalyst exhibits a small cell voltage of 1.67 V at 10 mA cm⁻² in addition to outstanding durability, demonstrating the great potential as a high efficient bifunctional electrocatalyst for overall water splitting.