Enhancing hydrogen storage properties of the Mg/MgH2 system by the addition of bis(tricyclohexylphosphine)nickel(II) dichloride

This is a first report on the use of the bis(tricyclohexylphosphine)nickel (II) dichloride complex (abbreviated as NiPCy3) into MgH₂ based hydrogen storage systems. Different composites were prepared by planetary ball-milling by doping MgH₂ with (i) free tricyclohexylphosphine (PCy3) without or with nickel nanoparticles, (ii) different NiPCy3 contents (5–20 wt%) and (iii) nickel and iron nanoparticles with/without NiPCy3. The microstructural characterization of these composites before/after dehydrogenation was performed by TGA, XRD, NMR and SEM-EDX. Their hydrogen absorption/desorption kinetics were measured by TPD, DSC and PCT. All MgH₂ composites showed much better dehydrogenation properties than the pure ball-milled MgH₂. The hydrogen absorption/release kinetics of the Mg/MgH₂ system were significantly enhanced by doping with only 5 wt% of NiPCy3 (0.42 wt% Ni); the mixture desorbed H₂ starting at 220 °C and absorbed 6.2 wt% of H₂ in 5 min at 200 °C under 30 bars of hydrogen. This remarkable storage performance was not preserved upon cycling due to the complex decomposition during the dehydrogenation process. The hydrogen storage properties of NiPCy3-MgH₂ were improved and stabilized by the addition of Ni and Fe nanoparticles. The formed system released hydrogen at temperatures below 200 °C, absorbed 4 wt% of H₂ in less than 5 min at 100 °C, and presented good reversible hydriding/dehydriding cycles. A study of the different storage systems leads to the conclusion that the NiPCy3 complex acts by restricting the crystal size growth of Mg/MgH₂, catalyzing the H₂ release, and homogeneously dispersing nickel over the Mg/MgH₂ surface.     

Interfacial engineering of nickel/vanadium based two-dimensional layered double hydroxide for solid-state hydrogen storage in MgH2

As a high-density solid-state hydrogen storage material, magnesium hydride (MgH₂) is promising for hydrogen transportation and storage. Yet, its stable thermodynamics and sluggish kinetics are unfavorable for that required for commercial application. Herein, nickel/vanadium trioxide (Ni/V₂O₃) nanoparticles with heterostructures were successfully prepared via hydrogenating the NiV-based two-dimensional layered double hydroxide (NiV-LDH). MgH₂ + 7 wt% Ni/V₂O₃ presented more superior hydrogen absorption and desorption performances than pure MgH₂ and MgH₂ + 7 wt% NiV-LDH. The initial discharging temperature of MgH₂ was significantly reduced to 190 °C after adding 7 wt% Ni/V₂O₃, which was 22 and 128 °C lower than that of 7 wt% NiV-LDH modified MgH₂ and additive-free MgH₂, respectively. The completely dehydrogenated MgH₂ + 7 wt% Ni/V₂O₃ charged 5.25 wt% H₂ in 20 min at 125 °C, while the hydrogen absorption capacity of pure MgH₂ only amounted to 4.82 wt% H₂ at a higher temperature of 200 °C for a longer time of 60 min. Moreover, compared with MgH₂ + 7 wt% NiV-LDH, MgH₂ + 7 wt% Ni/V₂O₃ shows better cycling performance. The microstructure analysis indicated the heterostructural Ni/V₂O₃ nanoparticles were uniformly distributed. Mg₂Ni/Mg₂NiH₄ and metallic V were formed in-situ during cycling, which synergistically tuned the hydrogen storage process in MgH₂. Our work presents a facile interfacial engineering method to enhance the catalytic activity by constructing a heterostructure, which may provide the mentality of designing efficient catalysts for hydrogen storage.     

Synergistic effect of rGO supported Ni3Fe on hydrogen storage performance of MgH2

Bimetallic catalysts possess unique physical and chemical properties that distinct from the individual, which offer the opportunity to ameliorate the hydrogen storage properties of MgH₂. Herein, a Ni₃Fe catalyst homogeneously loaded on the surface of reduced graphene oxide (Ni₃Fe/rGO) was prepared based on layered double hydroxide (LDH) precursor. The novel Ni₃Fe/rGO nano-catalyst was subsequently doped into MgH₂ to improve its hydrogen storage performance. The MgH₂-5 wt.% Ni₃Fe/rGO composite requires only 100 s to reach 6 wt% hydrogen capacity at 100 °C, while for MgH₂ doped with 5 wt% Ni₃Fe, Ni/rGO and Fe/rGO all require more than 500 s to uptake 3 wt% hydrogen under the same condition. The onset dehydrogenation temperature of the MgH₂-5 wt.% Ni₃Fe/rGO composite is about 185 °C, much lower than that of the MgH₂ doped with 5 wt% Ni₃Fe (205 °C), Ni/rGO (210 °C) and Fe/rGO (250 °C), and it can release H₂ completely even in 1000 s at 275 °C. Besides, the MgH₂-5 wt% Ni₃Fe/rGO displays the lowest dehydrogenation apparent activation energy of 59.3 kJ/mol calculated by Kissinger equation. The synergetic effect attributing to rGO, in-situ formed active species of Mg₂Ni and Fe is in charge of the excellent catalytic effect on hydrogen storage behavior of MgH₂. Meanwhile, this study supplies innovative insights to design high efficiency catalysts based on the LDH precursor.     

Enhanced hydrogen-storage properties of MgH2 by Fe–Ni catalyst modified three-dimensional graphene

High dehydrogenation temperature and slow dehydrogenation kinetics impede the practical application of magnesium hydride (MgH₂) serving as a potential hydrogen storage medium. In this paper, Fe–Ni catalyst modified three-dimensional graphene was added to MgH₂ by ball milling to optimize the hydrogen storage performance, the impacts and mechanisms of which are systematically investigated based on the thermodynamic and kinetic analysis. The MgH₂+10 wt%Fe–Ni@3DG composite system can absorb 6.35 wt% within 100 s (300 °C, 50 atm H₂ pressure) and release 5.13 wt% within 500 s (300 °C, 0.5 atm H₂ pressure). In addition, it can absorb 6.5 wt% and release 5.7 wt% within 10 min during 7 cycles, exhibiting excellent cycle stability without degradation. The absorption-desorption mechanism of MgH₂ can be changed by the synergistic effects of the two catalyst materials, which significantly promotes the improvement of kinetic performance of dehydrogenation process and reduces the hydrogen desorption temperature.     

Catalysis derived from flower-like Ni MOF towards the hydrogen storage performance of magnesium hydride

Herein, a novel flower-like Ni MOF with good thermostability is introduced into MgH₂ for the first time, and which demonstrates excellent catalytic activity on improving hydrogen storage performance of MgH₂. The peak dehydrogenation temperature of MgH₂-5 wt.% Ni MOF is 78 °C lower than that of pure MgH₂. Besides, MgH₂-5 wt.% Ni MOF shows faster de/hydrogenation kinetics, releasing 6.4 wt% hydrogen at 300 °C within 600 s and restoring about 5.7 wt% hydrogen at 150 °C after dehydrogenation. The apparent activation energy for de/hydrogenation reactions are calculated to be 107.8 and 42.8 kJ/mol H₂ respectively, which are much lower than that of MgH₂ doped with other MOFs. In addition, the catalytic mechanism of flower-like Ni MOF is investigated in depth, through XRD, XPS and TEM methods. The high catalytic activity of flower-like Ni MOF can be attributed to the combining effect of in-situ generated Mg₂Ni/Mg₂NiH₄, MgO nanoparticles, amorphous C and remaining layered Ni MOF. This research extends the knowledge of elaborating efficient catalysts via MOFs in hydrogen storage materials.     

Dual-cation K2TaF7 catalyst improves high-capacity hydrogen storage behavior of MgH2

MgH₂ has been extensively regarded as a low-cost hydrogen storage material with high gravimetric hydrogen capacity of approximately 7.6 wt%. However, the hydrogen release and absorption kinetics in MgH₂ still needs further improving. For the first time, the catalytic impacts of a new dual-cation metal fluoride K₂TaF₇ upon the hydrogen storage characteristics of MgH₂ have been investigated in this work. With only 1 wt% K₂TaF₇ dopant, the initial dehydrogenation temperature of MgH₂ was lowered by about 130 °C, releasing more than 7.3 wt% hydrogen totally. The desorption activation energy of MgH₂ + 1 wt% K₂TaF₇ composite was decreased to 107.2 ± 1.2 kJ mol^?1. Besides, at 190 °C, the dehydrogenated MgH₂ + 1 wt% K₂TaF₇ sample could absorb 6.56 wt% H₂, while pristine MgH₂ re-absorbed only 3.45 wt% H₂. Further studies revealed that K₂TaF₇ could react with MgH₂ during dehydrogenation and produce symbiotic hydrides KMgH₃ and TaH_0.8, which could play the role of hydrogen pumps during hydrogen release and uptake. The cooperative catalysis between the hydrogen pump effect and the active interface in the multi-hydride area significantly enhanced the reversible hydrogen storage in the MgH₂+1 wt% K₂TaF₇ composite. This study provides new thinking for novel catalysts to elevate the hydrogen storage performance of MgH₂.     

Synergistic enhancement of hydrogen storage properties in MgH2 using LiNbO3 catalyst

Extensive researches are being conducted to improve the high dehydrogenation temperature and sluggish hydrogen release rate of magnesium hydride (MgH₂) for better industrial application. In this study, LiNbO₃, a catalyst composed of alkali metal Li and transition metal Nb, was prepared through a direct one-step hydrothermal synthesis, which remarkably improved the hydrogen storage performance of MgH₂. With the addition of 6 wt% LiNbO₃ in MgH₂, the initial dehydrogenation temperature decreases from 300 °C to 228 °C, representing a drop of almost 72 °C compared to milled MgH₂. Additionally, the MgH₂-6 wt.% LiNbO₃ composite can quickly release 5.45 wt% of H₂ within 13 min at 250 °C, and absorbed about 3.5 wt% of H₂ within 30 min at 100 °C. It is also note that LiNbO₃ shows better catalytic effect compared to solely adding Li₂O or Nb₂O₅. Furthermore, the activation energy of MgH₂-6 wt.% LiNbO₃ decreased by 44.37% compared to milled MgH₂. The enhanced hydrogen storage performance of MgH₂ is attributed to the in situ formation of Nb-based oxides in the presence of LiNbO₃, which creates a multielement and multivalent chemical environment.     

Integrated Ni/Nb2O5 nanocatalytic agent dose for improving the hydrogenation/dehydrogenation kinetics of reacted ball milled MgH2 powders

Reactive ball milling (RBM) technique was employed to synthesize ultrafine powders of MgH₂, using high energy ball mill operated at room temperature under 50 bar of a hydrogen gas atmosphere. The MgH₂ powders obtained after 200 h of continuous RBM time composed of β and γ phases. The powders possessed nanocrystalline characteristics with an average grain of about 10 nm in diameter. The time required for complete hydrogen absorption and desorption measured at 250 °C was 500 s and 2500 s, respectively. In order to improve the hydrogenation/dehydrogenation kinetics of as synthesized MgH₂ powders, three different types of nanocatalysts (metallic Ni, Nb₂O₅ and (Ni)_x/(Nb₂O₅)_y) were utilized with different weight percentages and independently ball milled with the MgH₂ powders for 50 h under 50 bar of a hydrogen gas atmosphere. The results showed that the prepared nanocomposite MgH₂/5Ni/5Nb₂O₅ powders possessed superior hydrogenation/dehydrogenation characteristics, indexed by low values of activation energy for β-phase (68 kJ/mol) and γ-phase (74 kJ/mol). This nanocomposite system showed excellent hydrogenation/dehydrogenization behavior, indexed by the short time required to uptake (41 s) and release (121 s) of 5 wt% H₂ at 250 °C. At this temperature the synthesized nanocomposite powders possessed excellent absorption/desorption cyclability of 180 complete cycles. No serious degradation on the hydrogen storage capacity could be detected and the system exhibited nearly constant absorption and desorption values of +5.46 and −5.46 wt% H₂, respectively.     

CNTs decorated with CoFeB as a dopant to remarkably improve the dehydrogenation/rehydrogenation performance and cyclic stability of MgH2

The chain-like carbon nanotubes (CNTs) decorated with CoFeB (CoFeB/CNTs) prepared by oxidation-reduction method is introduced into MgH₂ to facilitate its hydrogen storage performance. The addition of CoFeB/CNTs enables MgH₂ to start desorbing hydrogen at only 177 °C. Whereas pure MgH₂ starts hydrogen desorption at 310 °C. The dehydrogenation apparent activation energy of MgH₂ in CoFeB/CNTs doped-MgH₂ composite is only 83.2 kJ/mol, and this is about 59.5 kJ/mol lower than that of pure MgH₂. In addition, the completely dehydrogenated MgH₂−10 wt% CoFeB/CNTs sample can start to absorb hydrogen at only 30 °C. At 150 °C and 5 MPa H₂, the MgH₂ in CoFeB/CNTs doped-MgH₂ composite can absorb 6.2 wt% H₂ in 10 min. The cycling kinetics can remain rather stable up to 20 cycles, and the hydrogen storage capacity retention rate is 98.5%. The in situ formation of Co₃MgC, Fe, CoFe and B caused by the introduction of CoFeB/CNTs can provide active and nucleation sites for the dehydrogenation/rehydrogenation reactions of MgH₂. Moreover, CNTs can provide hydrogen diffusion pathways while also enhancing the thermal conductivity of the sample. All of these can facilitate the dehydrogenation/rehydrogenation performance and cyclic stability of MgH₂.     

Enhanced hydrogen desorption/absorption properties of magnesium hydride with CeF3@Gn

In order to improve the hydrogen storage performance of MgH₂, graphene and CeF₃ co-catalyzed MgH₂ (hereafter denoted as MgH₂+CeF₃@Gn) were prepared by wet method ball milling and hydriding, which is a simple and time-saving method. The effect of CeF₃@Gn on the hydrogen storage behavior of MgH₂ was investigated. The experimental results showed that co-addition of CeF₃@Gn greatly decreased the hydrogen desorption/absorption temperature of MgH₂, and remarkably improved the dehydriding/hydriding kinetics of MgH₂. The onset hydrogen desorption temperature of Mg + CeF₃@Gn is 232 °C，which is 86 °C lower than that of as-milled undoped MgH₂, and its hydrogen desorption capacity reaches 6.77 wt%, which is 99% of its theoretical capacity (6.84 wt%). At 300 °C and 200 °C the maximum hydrogen desorption rates are 79.5 and 118 times faster than that of the as-milled undoped MgH₂. Even at low temperature of 150 °C, the dedydrided sample (Mg + CeF₃@Gn) also showed excellent hydrogen absorption kinetics, it can absorb 5.71 wt% hydrogen within 50 s, and its maximum hydrogen absorption rate reached 15.0 wt% H₂/min, which is 1765 times faster than that of the undoped Mg. Moreover, no eminent degradation of hydrogen storage capacity occurred after 15 hydrogen desorption/absorption cycles. Mg + CeF₃@Gn showed excellent hydrogen de/absorption kinetics because of the MgF₂ and CeH_2-3 that are formed in situ, and the synergic catalytic effect of these by-products and unique structure of Gn.     

The Mg/MAX-phase composite for hydrogen storage

The Mg/MAX-phase composite materials are synthesized by reactive ball milling (RBM) in a hydrogen gas atmosphere, and phase composition and dehydrogenation performance of the composites are investigated. The Ti₃AlC₂ MAX-phase markedly reduces the dehydrogenation temperature of the MgH₂ to 246 °C for the sample with 5 wt% of Ti₃AlC₂ MAX-phase and to 236 °C for the sample with 7 %wt. of Ti₃AlC₂ MAX-phase. The highest hydrogen capacity of 5.6 wt% was achieved for the Mg+7 wt% MAX-phase composite. The kinetic mechanism of the dehydrogenation of the composites is investigated by the Johnson-Mehl-Avrami-Kolmogorov (JMAK) technique.     

Improved hydrogen desorption properties of exfoliated graphite and graphene nanoballs modified MgH2

Magnesium hydride is a leading hydrogen storage material with high hydrogen content, however, suffers with sluggish kinetics. Several methods have been adopted to improve its kinetics, out of which, the addition of catalyst is an impressive way. Carbon materials have shown their promises as catalyst for several hydrogen storage materials. The present work is devoted to investigating the catalytic effects of exfoliated graphite and graphene nanoballs on dehydrogenation kinetics of MgH₂. The lowest onset temperature of 282 °C is observed for graphene nanoballs modified MgH₂ system. Exfoliated graphite mixed MgH₂ desorbed hydrogen at onset temperature 301 °C which is also less than the dehydrogenation temperature of pure MgH₂ (410 °C). The dehydrogenation kinetics has significantly improved by the addition of these catalysts as compared to the pure MgH₂. The activation energy for the hydrogen desorption of MgH₂ was reduced from 170 (pure MgH₂) to 136 ± 2 and 140 ± 2 kJ/mol by the addition of exfoliated graphite and graphene nanoballs, respectively. The XRD results confirmed the presence of MgH₂ after milling with exfoliated graphite and graphene nanoballs that indicates that there are no reactions during the milling thus both the additives are effective to improve the dehydrogenation as a catalyst.     

Excellent synergistic catalytic mechanism of in-situ formed nanosized Mg2Ni and multiple valence titanium for improved hydrogen desorption properties of magnesium hydride

Nowadays, catalytic doping has been regarded as one of the most promising and effective methods to improve the sluggish kinetics of magnesium hydride (MgH₂). Herein, we synthesized Ni/TiO₂ nanocomposite with the particle sizes about 20 nm by an extremely facile solvothermal method. Then, the Ni/TiO₂ nanocomposite was doped into MgH₂ to enhance its reversible hydrogen storage properties. A remarkably enhancement of de/rehydrogenation kinetics of MgH₂ can be achieved by doped with Ni/TiO₂ nanocomposite, compared to that solely doped with Ni or TiO₂ nanoparticles. The hydrogen desorption peak temperature of MgH₂Ni/TiO₂ is 232 °C, which is 135.4 °C lower than that of ball-milled MgH₂ (367.4 °C). Moreover, the MgH₂Ni/TiO₂ can desorb 6.5 wt% H₂ within 7 min at 265 °C and absorb ∼5 wt% H₂ within 10 min at 100 °C. In particular, the apparent activation energy of MgH₂Ni/TiO₂ is obviously decreased from 160.5 kJ/mol (ball-milled MgH₂) to 43.7 ± 1.5 kJ/mol. Based on the analyses of microstructure evolution, it is proved that metallic Ni particles can react with Mg easily to form fine Mg₂Ni particles after dehydrogenation, and the in-situ formed Mg₂Ni will transform into Mg₂NiH₄ in the subsequent rehydrogenation process. The significantly improved hydrogen absorption/desorption properties of MgH₂Ni/TiO₂ can be ascribed to the synergistic catalytic effect of reversible transformation of Mg₂Ni/Mg₂NiH₄ which act as “hydrogen pump”, and the multiple valence titanium compounds (Ti^4+/3+/2+) which promote the electrons transfer of MgH₂/Mg.     

Remarkable catalytic effect of Ni and ZrO2 nanoparticles on the hydrogen sorption properties of MgH2

In the present study, the catalytic effect of Ni and ZrO₂ nanoparticles on the hydrogen absorption and desorption properties of MgH₂ has been investigated. The MgH₂ nanocomposites were prepared by high-energy ball-milling. The morphology, phase structure, thermal behavior, and hydrogen storage properties of the materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), temperature-programmed desorption (TPD), differential scanning calorimetry (DSC), and the pressure-composition temperature (PCT) methods. ZrO₂ and Ni nanoparticles were homogenously dispersed into the MgH₂ matrix. The calculated apparent activation energy for dehydrogenation was 63.4 kJ/mol, which was decreased by 80.1 kJ/mol compared to that of as-milled MgH₂. As a result, MgH₂+5 wt.%Ni+5 wt.%ZrO₂ demonstrated improved dehydrogenation and hydrogenation kinetics at 310 °C. The MgH₂+5 wt.%Ni+5 wt.%ZrO₂ sample released about 6.83 wt.% and absorbed about 6.10 wt.% in less than 30 min. Therefore, the co-catalysis of Ni and ZrO₂ significantly enhances the hydrogenation and dehydrogenation properties of MgH₂.     

Improvement of hydrogen storage properties in MgH2 catalysed by K2NbF7

The catalytic effects of K₂NbF₇ on the hydrogen storage properties of MgH₂ have been studied for the first time. MgH₂ + 5 wt% K₂NbF₇ has reduced the onset dehydrogenation temperature to 255 °C, which is 75 °C lower than the as-milled MgH₂. For the rehydrogenation kinetic, at 150 °C, MgH₂ + 5 wt% K₂NbF₇ absorbs 4.7 wt% of hydrogen in 30 min whereas the as-milled MgH₂ only absorbs 0.7 wt% of hydrogen under similar condition. For the dehydrogenation kinetic, at 320 °C, the MgH₂ + 5 wt% K₂NbF₇ is able to release 5.2 wt% of hydrogen in 5.6 min as compared to 0.3 wt% by the as-milled MgH₂ under similar condition. Comparatively, the E_a value of MgH₂ + 5 wt% K₂NbF₇ is 96.3 kJ/mol, which is 39 kJ/mol lower compared to the as-milled MgH₂. The MgF₂, the KH and the Nb that are found after the heating process are believed to be the active species that have improved the system properties. It is concluded that the K₂NbF₇ is a good catalyst to improve the hydrogen storage properties of MgH₂.     

Superior catalysis of NbN nanoparticles with intrinsic multiple valence on reversible hydrogen storage properties of magnesium hydride

Magnesium hydride, as a potential solid state hydrogen carrier has attracted great attention around the world especially in the energy storage domain due to the high hydrogen storage capacity and the good cycling stability. But kinetic and thermodynamic barriers also impede the practical application and development of MgH₂. Nanoscale catalysts are deemed to be the most effective measure to overcome the kinetic barrier and lower the temperature required for hydrogen release in MgH₂. NbN nanoparticles (~20 nm) with intrinsic Nb³⁺-N and Nb⁵⁺-N were prepared using the molten salt method and used as catalysts in the MgH₂ system. It is found that the NbN nanoparticles exhibit a superior catalytic effect on de/rehydrogenation kinetics for the MgH₂/Mg system. About 6.0 wt% hydrogen can be liberated for the MgH₂+5NbN sample within 5 min at 300 °C, and it takes 12 min to desorb the same amount of hydrogen at 275 °C. Meanwhile, the MgH₂+5NbN sample can absorb 6.0 wt% hydrogen within 16 min at 150 °C, and absorb 5.0 wt% hydrogen within 24 min even at 100 °C. Particularly, the catalyzed samples exhibit excellent hydrogen absorption/desorption kinetic stability. After multiple cycles, there is no kinetic attenuation and the hydrogen capacity remains at about 6.0 wt%. It is demonstrated that the NbN nanoparticles with intrinsic multiple valence can be the critical effect in improving the hydrogen storage kinetics of MgH₂. The stability of Nb₄N₃ phase and Nb³⁺-N and Nb⁵⁺-N valence states can ensure a stable catalytic effect in the system.     

Facile synthesis of nickel-vanadium bimetallic oxide and its catalytic effects on the hydrogen storage properties of magnesium hydride

To improve the dehydrogenation/hydrogenation performance of magnesium hydride (MgH₂), a nickel-vanadium bimetallic oxide (NiV₂O₆) was prepared by a simple hydrothermal method using ammonium metavanadate and nickel nitrate as raw materials. This oxide was used to improve the hydrogen storage performance of MgH₂. NiV₂O₆ reacted with Mg to form Mg₂Ni and V₂O₅; Mg₂Ni and V₂O₅ played an important role in improving the hydrogen storage properties of MgH₂. The NiV₂O₆-doped MgH₂ had an excellent hydrogen absorption and desorption kinetics performance, and it could absorb 5.59 wt% of hydrogen within 50 min at 150 °C and release about 5.3 wt% of hydrogen within 12 min. The apparent activation energies for the dehydrogenation and hydrogenation of MgH₂-NiV₂O₆ were 92.9 kJ mol^?1 and 24.9 kJ mol^?1, respectively. These were 21.7% and 66.3% lower than those of MgH_2, respectively. The mechanism analysis demonstrated that the improved kinetic properties of MgH₂ resulted from the heterogeneous catalysis of vanadium and nickel.     

Graphene-anchored Ni6MnO8 nanoparticles with steady catalytic action to accelerate the hydrogen storage kinetics of MgH2

Transition metal-based oxides have been proven to have a substantial catalytic influence on boosting the hydrogen sorption performance of MgH₂. Herein, the catalytic action of Ni₆MnO₈@rGO nanocomposite in accelerating the hydrogen sorption properties of MgH₂ was investigated. The MgH₂ + 5 wt% Ni₆MnO₈@rGO composites began delivering H₂ at 218 °C, with about 2.7 wt%, 5.4 wt%, and 6.6 wt% H₂ released within 10 min at 265 °C, 275 °C, and 300 °C, respectively. For isothermal hydrogenation at 75 °C and 100 °C, the dehydrogenated MgH₂ + 5 wt% Ni₆MnO₈@rGO sample could absorb 1.0 wt% and 3.3 wt% H₂ in 30 min, respectively. Moreover, as compared to addition-free MgH₂, the de/rehydrogenation activation energies for doped MgH₂ composites were lowered to 115 ± 11 kJ/mol and 38 ± 7 kJ/mol, and remarkable cyclic stability was reported after 20 cycles. Microstructure analysis revealed that the in-situ formed Mg₂Ni/Mg₂NiH₄, Mn, MnO₂, and reduced graphene oxide synergically enhanced the hydrogen de/absorption properties of the Mg/MgH₂ system.     

Enhancing hydrogen storage performance of MgH2 through the addition of BaMnO3 synthesized via solid-state method

Currently, magnesium hydride (MgH₂) as a solid-state hydrogen storage material has become the subject of major research owing to its good reversibility, large hydrogen storage capacity (7.6 wt%) and affordability. However, MgH₂ has a high decomposition temperature (>400 °C) and slow desorption and absorption kinetics. In this work, BaMnO₃ was synthesized using the solid-state method and was used as an additive to overcome the drawbacks of MgH₂. Interestingly, after adding 10 wt% of BaMnO₃, the initial desorption temperature of MgH₂ decreased to 282 °C, which was 138 °C lower than that of pure MgH₂ and 61 °C lower than that of milled MgH₂. For absorption kinetics, at 250 °C in 2 min, 10 wt% of BaMnO₃-doped MgH₂ absorbed 5.22 wt% of H₂ compared to milled MgH₂ (3.48 wt%). Conversely, the desorption kinetics also demonstrated that 10 wt% of BaMnO₃-doped MgH₂ samples desorbed 5.36 wt% of H₂ at 300 °C within 1 h whereas milled MgH₂ only released less than 0.32 wt% of H₂. The activation energy was lowered by 45 kJ/mol compared to that of MgH₂ after the addition of 10 wt% of BaMnO₃. Further analyzed by using XRD revealed that the formation of Mg_0·9Mn_0·1O, Mn₃O₄ and Ba or Ba-containing enhanced the performance of MgH₂.     

Ternary transition metal alloy FeCoNi nanoparticles on graphene as new catalyst for hydrogen sorption in MgH2

The present investigation deals with the synthesis of ternary transition metal alloy nanoparticles of FeCoNi and graphene templated FeCoNi (FeCoNi@GS) by one-pot reflux method and there use as a catalyst for hydrogen sorption in MgH₂. It has been found that the MgH₂ catalyzed by FeCoNi@GS (MgH₂: FeCoNi@GS) has the onset desorption temperature of ~255 °C which is 25 °C and 100 °C lower than MgH₂ catalyzed by FeCoNi (MgH₂: FeCoNi) (onset desorption temperature 280 °C) and the ball-milled (B.M) MgH₂ (onset desorption temperature 355 °C) respectively. Also MgH₂: FeCoNi@GS shows enhanced kinetics by absorbing 6.01 wt% within just 1.65 min at 290 °C under 15 atm of hydrogen pressure. This is much-improved sorption as compared to MgH₂: FeCoNi and B.M MgH₂ for which hydrogen absorption is 4.41 wt% and 1.45 wt% respectively, under the similar condition of temperature, pressure and time. More importantly, the formation enthalpy of MgH₂: FeCoNi@GS is 58.86 kJ/mol which is 19.26 kJ/mol lower than B.M: MgH₂ (78.12 kJ/mol). Excellent cyclic stability has also been found for MgH₂: FeCoNi@GS even up to 24 cycles where it shows only negligible change from 6.26 wt% to 6.24 wt%. A feasible catalytic mechanism of FeCoNi@GS on MgH₂ has been put forward based on X-ray diffraction (XRD), Raman spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Photoelectron Spectroscopy (XPS), and microstructural (electron microscopic) studies.