Computational insights of alkali metal (Li / Na / K) atom decorated buckled bismuthene for hydrogen storage

The mechanism of hydrogen molecule adsorption on 2D buckled bismuthene (b-Bi) monolayer decorated with alkali metal atoms was studied using density functional theory based first principles calculations. The decorated atoms Li, Na and K exhibited distribution on surface of b-Bi monolayer with increasing binding energy of 2.6 eV, 2.9 eV and 3.6 eV respectively. The adsorption of H₂ molecule on the slabs appeared stable which was further improved upon inclusion of van der Waals interactions. The adsorption behaviour of H₂ molecules on the decorated slabs is physisorption whereas the slabs were able to bind up to five H₂ molecules. The average adsorption energy per H₂ molecules are in range of 0.1–0.2 eV which is good for practical applications. The molecular dynamics simulation also confirmed the thermodynamic stabilities of five H₂ molecules adsorbed on the decorated slabs. The storage capacity values are found 2.24 wt %, 2.1 wt %, and 2 wt %, for respective cases of Li, Na and K atoms decorated b-Bi. The analysis of the adsorbed cases pointed to electrostatic interaction of Li and H₂ molecule. The adsorption energies, binding energies, charge analysis, structural stability, density of states, and hydrogen adsorption percentage specifies that the decorated b-Bi may serve as an efficient hydrogen storage material and could be an effective medium to interact with hydrogen molecules at room temperature.     

Li-decorated B2O as potential candidates for hydrogen storage: A DFT simulations study

Two-dimensional (2D) B₂O monolayer is considered as a potential hydrogen storage material owing to its lower mass density and high surface-to-volume ratio. The binding between H₂ molecules and B₂O monolayer proceeds through physisorption and the interaction is very weak, it is important to improve it through appropriate materials design. In this work, based on density functional theory (DFT) calculations, we have investigated the hydrogen storage properties of Lithium (Li) functionalized B₂O monolayer. The B₂O monolayer decorated by Li atoms can effectively improve the hydrogen storage capacity. It is found that each Li atom on B₂O monolayer can adsorb up to four H₂ molecules with a desirable average adsorption energy (E_ave) of 0.18 eV/H₂. In the case of fully loaded, forming B₃₂O₁₆Li₉H₇₂ compound, the hydrogen storage density is up to 9.8 wt%. Additionally, ab initio molecular dynamics (AIMD) calculations results show that Li-decorated B₂O monolayer has good reversible adsorption performance for H₂ molecules. Furthermore, the Bader charge and density of states (DOS) analysis demonstrate H₂ molecules are physically absorbed on the Li atoms via the electrostatic interactions. This study suggests that Li-decorated B₂O monolayer can be a promising hydrogen storage material.     

C7N6 monolayer as high capacity and reversible hydrogen storage media: A DFT study

Searching advanced materials with high capacity and efficient reversibility for hydrogen storage is a key issue for the development of hydrogen energy. In this work, we studied systematically the hydrogen storage properties of the pure C₇N₆ monolayer using density functional theory methods. Our results demonstrate that H₂ molecules are spontaneously adsorbed on the C₇N₆ monolayer with the average adsorption energy in the range of 0.187–0.202 eV. The interactions between H₂ molecules and C₇N₆ monolayer are of electrostatic nature. The gravimetric and volumetric hydrogen storage capacities of the C₇N₆ monolayer are found to be 11.1 wt% and 169 g/L, respectively. High hardness and low electrophilicity provides the stabilities of H₂–C₇N₆ systems. The hydrogenation/dehydrogenation (desorption) temperature is predicted to be 239 K. The desorption temperatures and desorption capacity of H₂ under practical conditions further reveal that the C₇N₆ monolayer could operate as reversible hydrogen storage media. Our results thus indicate that the C₇N₆ monolayer is a promising material with efficient, reversible, and high capacity for H₂ storage under realistic conditions.     

Enhancement of hydrogen storage capacity on co-functionalized GaS monolayer under external electric field

Hydrogen storage properties of co-functionalized 2D GaS monolayer have been systematically investigated by first-principles calculations. The strength of the binding energy of hydrogen (H₂) molecules to the pristine GaS surface shows the physisorption interactions. Co-functionalized GaS sheet by Li, Na, K and Ca atoms enhanced the capacity of binding energies of hydrogen and strength of hydrogen storage considerably. Besides, DFT calculations show that there is no structural deformation during H₂ desorption from co-functionalized GaS surface. The binding energies of per H₂ molecules is found to be 0.077 eV for pristine GaS surface and 0.064 eV–0.37 eV with the co-functionalization of GaS surface. Additionally, in the presence of applied external electric field enhanced the strength of binding energies and it is found to be 0.09 eV/H₂ for pristine GaS case and 0.19 eV/H₂ to 0.38 eV/H₂ for co-functionalized GaS surface. Among the studied GaS monolayer is found to be the superior candidate for hydrogen storage purposes. The theoretical studies suggest that the electronic properties of the 2D GaS monolayer show the electrostatic behavior of hydrogen molecules which confirms by the interactions between adatoms and hydrogen molecules before and after hydrogen adsorption.     

Strain and defect engineering of graphene for hydrogen storage via atomistic modelling

The adsorption of hydrogen molecules on monolayer graphene is investigated using molecular dynamics simulations (MDS). Interatomic interactions of the graphene layer are described using the well-known AIREBO potential, while the interactions between graphene and hydrogen molecule are described using Lennard-Jones potential. In particular, the effect of strain and different point defects on the hydrogen storage capability of graphene is studied. The strained graphene layer is found to be more active for hydrogen and show 6.28 wt% of H₂ storage at 0.1 strain at 77 K temperature and 10 bar pressure. We also studied the effect of temperature and pressure on the adsorption energy and gravimetric density of H₂ on graphene. We considered different point defects in the graphene layer like monovacancy (MV), Stone Wales (SW), 5-8-5 double vacancy (DV), 555–777 DV, and 5555-6-7777 DV which usually occur during the synthesis of graphene. At 100 bar pressure, graphene with 1% concentration of MV defects leads to 9.3 wt% and 2.208 wt% of H₂ storage at 77 K and 300 K, respectively, which is about 42% higher than the adsorption capacity of pristine graphene. Impact of defects on the critical stress and strain of defected graphene layers is also studied.     

The effect of functional groups (O,F, or OH) on reversible hydrogen storage properties of Ti2X (X=C or N) monolayer

The effect of functional groups (O, F, or OH) on the hydrogen storage properties of Ti₂X (X = C or N) monolayer was systematically investigated by first-principles calculations. The results show that the reversible hydrogen storage capacity of Ti₂X(OH)₂ monolayer is approximately 2.7 wt%, which is larger than that of Ti₂XO₂ and Ti₂XF₂ monolayers. The binding energy of the OH group at the F site is stronger than H atom. Thus, H₂ molecules will not be dissociated on Ti₂X(OH)₂ monolayer. At this time, the loss of 1.8 wt% hydrogen storage capacity is not produced in Ti₂X(OH)₂ monolayer. Furthermore, the PDOS, the population analysis, and the electron density difference explore that electron transfer appears between Ti and the second layer H₂ molecules on Ti₂X(OH)₂ monolayer, and a Dewar-Kubas interaction lies between second layer H₂ molecules and Ti₂X(OH)₂ monolayer. For Ti₂X(OH)₂ monolayer, the molecular dynamic simulation indicates that the H₂ molecules by Dewar-Kubas interaction sable adsorption at 300 K, and desorption at 400 K. Therefore, Ti₂X(OH)₂ is appropriate for reversible hydrogen sorbent storage materials under ambient conditions.     

The enhancement of hydrogen storage capacity in Li,Na and Mg-decorated BC3 graphene by CLICH and RICH algorithms

New hydrogen adsorption states on Li, Na, and Mg-decorated graphene-type BC₃ sheet have been investigated by first-principles calculations. The structural, electronic and binding properties, metal binding and nH₂ (n = 1–10) adsorption states of these systems are studied in detail with the Mulliken analysis, charge density differences, and partial density of states. To enhance the number of the adsorbed H₂ molecules per metal atom, and also to generate the better initial coordinates for reducing the simulation time, we present two masthematical algorithms (CLICH and RICH). The tested results on BC₃ sheet and boron-doped graphene (C₃₀B₂) show that these algorithms can increase the number of adsorbed hydrogen molecules by minimizing the computational time. It is seen that nH₂ (n = 1–10) adsorbed Li,/Na and/Mg-decorated BC₃ single- and double-sided systems are industrial materials for hydrogen storage technology, their adsorption energies fall into the acceptable adsorption energy range (0.20–0.60 eV/H₂). It is concluded from the optimized geometries and charge density differences for the higher number of H₂ adsorbed systems that not only decorated metal atom but also the sheet plays an important role in hydrogen storage process, because the boron atoms in the sheet expand the induced electric field between the adatoms and BC₃ sheet. From Mulliken analysis, there is a charge transfer mechanism between H₂ molecules and metal atoms. Moreover, the resonant peaks for the sheet, metal atoms and H₂ molecules in partial density of states curves indicate the possible hybridizations. Additionally, these adsorption processes are supported by charge density difference plots.     

Hydrogen storage capacity and reversibility of Li-decorated B4CN3 monolayer revealed by first-principles calculations

This work explored the feasibility of Li decoration on the B₄CN₃ monolayer for hydrogen (H₂) storage performance using first-principles calculations. The results of density functional theory (DFT) calculations showed that each Li atom decorated on the B₄CN₃ monolayer can physically adsorb four H₂ molecules with an average adsorption energy of ?0.23 eV/H₂, and the corresponding theoretical gravimetric density could reach as high as 12.7 wt%. Moreover, the H₂ desorption behaviors of Li-decorated B₄CN₃ monolayer at temperatures of 100, 200, 300 and 400 K were simulated via molecular dynamics (MD) methods. The results showed that the structure was stable within the prescribed temperature range, and a large amount of H₂ could be released at 300 K, indicative of the reversibility of hydrogen storage. The above findings demonstrate that the Li-decorated B₄CN₃ monolayer can serve as a favorable candidate material for high-capacity reversible hydrogen storage application.     

Enhanced reversible hydrogen storage performance of light metal-decorated boron-doped siligene: A DFT study

The use of nanomaterials for hydrogen storage could play a very important role in the large-scale utilization of hydrogen as an energy source. However, nowadays several potential hydrogen storage nanomaterials do not have a large gravimetric density and stability at room temperature. In this work, we have investigated the hydrogen storage performances of Na-, K- and Ca-decorated B-doped siligene monolayer (BSiGeML) using density functional theory calculations. The results show that boron doping improves the interaction between the metal adatom and the siligene monolayer (SiGeML). The K- and Ca-decorated BSiGeMLs can bind up to seven H₂ molecules per metal adatom, whereas Na-decorated BSiGeML only adsorb four H₂ molecules per adsorption site. The effect of temperature and pressure on the hydrogen storage capacity of BSiGeMLs was also evaluated. At room temperature, all the H₂ molecules adsorbed on Na-, and Ca-decorated BSiGeML are stable at mild pressure. The metal decoration of both sides of BSiGeML may lead to hydrogen gravimetric densities exceeding the target of 5.5 wt% proposed by DOE for the year 2025. K- and Ca-decorated BSiGeML could be efficient hydrogen molecular storage media compared to undoped SiGeML and other 2D pristine materials.     

A reversible hydrogen storage material of Li-decorated two-dimensional (2D) C4N monolayer: First principles calculations

Two-dimensional (2D) materials can be regarded as potential hydrogen storage candidates because of their splendid chemical stability and high specific surface area. Recently, a new dumbbell-like carbon nitride (C₄N) monolayer with orbital hybridization of sp³ is reported. Motivated from the above exploration, the hydrogen adsorption properties of Li-decorated C₄N monolayer are comprehensively investigated via first principles calculations based on the density functional theory (DFT). It is found that the Dirac points and Dirac cones exists in the Brillouin zone (BZ) from the calculated electronic structure and indicates the C₄N can be used as an excellent topological material. Also, the calculated phonon spectra demonstrate that the C₄N monolayer owns a strong stability. Moreover, the calculated binding energy of decorated Li atom is bigger than its cohesive energy and results in Li atoms disperse over the surface of C₄N monolayer uniformly without clustering. In addition, the Li₈C₄N complex can capture up to 24H₂ molecules with an optimal hydrogen adsorption energy of −0.281 eV/H₂ and achieves the hydrogen storage density of 8.0 wt%. The ab initio molecular dynamics (AIMD) simulations suggest that the H₂ molecules can be desorbed quickly at 300 K. This study reveals that Li-decorated C₄N monolayer can be served as a promising hydrogen storage material.     

First-principles study of superior hydrogen storage performance of Li-decorated Be2N6 monolayer

The potential application of pristine Be₂N₆ monolayer and Li-decorated Be₂N₆ monolayer for hydrogen storage is researched by using periodic DFT calculations. Based on the obtained results, the Be₂N₆ monolayer gets adsorb up to seven H₂ molecules with an average binding energy of 0.099 eV/H₂ which is close to the threshold energy of 0.1 eV required for practical applications. Decoration of the Be₂N₆ monolayer with lithium atom significantly improves the hydrogen storage ability of the desired monolayer compared to that of the pristine Be₂N₆ monolayer. This can be attributed to the polarization of H₂ molecules induced by the charge transfer from Li atoms to the Be₂N₆ monolayer. Decoration of Be₂N₆ monolayer with two lithium atoms gives a promising medium that can hold up to eight H₂ molecules with average adsorption energy of 0.198 eV/H₂ and hydrogen uptake capacities of 12.12 wt%. The obtained hydrogen uptake capacity of 2Li/Be₂N₆ monolayer is much higher than the target set by the U.S. Department of Energy (5.5 wt% by 2020). Based on the van't Hoff equation, it is inferred that hydrogen desorption can occur at T_D = 254 K for 2Li/Be₂N₆ (8H₂) system which is close to ambient conditions. This is a remarkable result indicating important practical applications of 2Li/Be₂N₆ medium for hydrogen storage purposes.     

Stabilized Li-decoration and enhanced hydrogen storage on reduced graphene oxides

Hydrogen storage properties of Li-decorated graphene oxides containing epoxy and hydroxyl groups are studied by using density functional theory. The Li atoms form Li₄O/Li₃OH clusters and are anchored strongly on the graphene surface with binding energies of −3.20 and −2.84 eV. The clusters transfer electrons to the graphene substrate, and the Li atoms exist as Li⁺ cations with strong adsorption ability for H₂ molecules. Each Li atom can adsorb at least 2H₂ molecules with adsorption energies greater than −0.20 eV/H₂. The hydrogen storage properties of Li-decorated graphene at different oxidation degrees are studied. The computations show that the adsorption energy of H₂ is −0.22 eV/H₂ and the hydrogen storage capacity is 6.04 wt% at the oxidation ratio O/C = 1/16. When the O/C ratio is 1:8, the storage capacity reaches 10.26 wt% and the adsorption energy is −0.15 eV/H₂. These results suggest that reversible hydrogen storage with high recycling capacities at ambient temperature can be realized through light-metal decoration on reduced graphene oxides.     

Light and stable LinB14(n=1–5) clusters for high capacity hydrogen storage at room temperature: A DFT study

In this article, we have explored the hydrogen (H₂) storage capacity of the Li doped B clusters Li_nB₁₄(n = 1–5) using density functional theory (DFT). The geometrical and Bader's topological parameters indicate that the clusters adsorb H₂ in the molecular form. The Li atom polarises the H₂ molecules for their effective adsorption on the clusters. The Li_nB₁₄ (n = 1–5) clusters are found to be stable even after H₂ adsorption at room temperature. The average adsorption energy is found to be in the range of 0.12–0.14 eV/H₂. Among the various clusters, the Li₅B₁₄ shows maximum H₂ storage capacity (13.89 wt%) at room temperature. The ADMP simulation reveals that within few femtoseconds (fs), the H₂ molecules begin to move away from the clusters and within 400 fs most of the H₂ molecules moved away from the clusters.     

Hydrogen storage on superalkali NLi4 decorated β12-borophene: A first principles insights

The hydrogen storage properties of superalkali NLi₄ decorated β₁₂-borophene have been comprehensively investigated based on first-principles density functional calculations (DFT). It is found that the NLi₄ cluster can be stably anchored on the surface of β₁₂-borophene because of its large binding energy. The calculated Bader charge population indicates that the charges are transferred from Li atoms to the original monolayer and causes the NLi₄ steady adsorbs onto the surface of β₁₂-borophene. For H₂ storage, two sides of NLi₄ decorated β₁₂-borophene can adsorb up to 24H₂ molecules with an ideal H₂ adsorption energy of ?0.176 eV/H_2. Meanwhile, the hydrogen uptake density achieves 7.66 wt% and surpasses the target of 6.5 wt% from U.S. Department of Energy (DOE). In addition, the adsorption reasons of H₂ molecules include the orbital hybridization between H₂ and β₁₂-borophene from the calculated projected density of states (PDOS) and the polarization effect of electrostatic field from the calculated charge density difference. We hope this theoretical study can encourage the experimental fabrication for hydrogen storage applications in the near future.     

Density functional theory study of reversible hydrogen storage in monolayer beryllium hydride by decoration with boron and lithium

The hydrogen storage capacity of M-decorated (M = Li and B) 2D beryllium hydride is investigated using first-principles calculations based on density functional theory. The Li and B atoms were calculated to be successfully and chemically decorated on the Surface of the α-BeH₂ monolayer with a large binding energy of 2.41 and 4.45eV/atom. The absolute value was higher than the cohesive energy of Li and B bulk (1.68, 5.81eV/atom). Hence, the Li and B atoms are strongly bound on the beryllium hydride monolayer without clustering. Our findings show that the hydrogen molecule interacted weakly with B/α-BeH₂(B-decorated beryllium hydride monolayer) with a low adsorption energy of only 0.0226 eV/H₂ but was strongly adsorbed on the introduced active site of the Li atom in the decorated BeH₂ with an improved adsorption energy of 0.472 eV/H₂. Based on density functional theory, the gravimetric density of 28H₂/8li/α-BeH₂) could reach 14.5 wt.% higher than DOE's target of 6.5 wt. % (the criteria of the United States Department of Energy). Therefore, our research indicates that the Li-decorated beryllium hydride monolayer could be a candidate for further investigation as an alternative material for hydrogen storage.     

Hydrogen storage properties of Li-decorated B2S monolayers: A DFT study

Hydrogen storage properties of Li functionalized B₂S honeycomb monolayers are studied using density functional theory calculations. The binding of H₂ molecules to the clean B₂S sheet proceeds through physisorption. Dispersed Li atoms on the monolayer surface increase both the hydrogen binding energies and the hydrogen storage capacities significantly. Additionally, ab initio molecular dynamics calculations show that there is no kinetic barrier during H₂ desorption from lithiated B₂S. Among the studied B₈S₄Li_x (x = 1, 2, 4, and 12) compounds, the B₈S₄Li₄ is found to be the most promising candidate for hydrogen storage purposes; with a 9.1 wt% H₂ content and 0.14 eV/H₂ average hydrogen binding energy. Furthermore, a detailed analysis of the electronic properties of the B₈S₄Li₄ compound before and after H₂ molecule adsorption confirms that the interactions between Li and H₂ molecules are of electrostatic nature.     

Complex interaction of hydrogen with the monolayer TiS2 decorated with Li and Li2O clusters: an ab initio random structure searching approach

We have applied ab initio random structure searching to study the structure, stability and hydrogen storage properties of monolayer TiS₂ coated with Li and small Li₂O clusters. For the low Li covered system we found a complex adsorption mechanism: some hydrogen molecules were adsorbed due to polarization with Li, others due to polarization with S near the surface of TiS₂. The peculiarities of the interaction of the H₂ molecules with each other and the preferred adsorption sites allowed us to formulate a series of recommendations that can be useful when selecting the material for the most effective support. Moreover, the findings also show that the storage capacity of this system can reach up to 9.63 wt%, presenting a good potential as hydrogen storage material. As for the Li₂O clusters supported on TiS₂, we found that the polarization of the Li–O bond increases upon the adsorption of the Li₂O nanocluster. Moreover, the polarized Li–S bonds appear in addition to the already existing Li–O bonds. All this is possible due to the extraction of 1.46 electrons from the S atom of the substrate by O atom of the cluster, and should contribute to an increase in both the adsorption energy and the maximum capacity. The adsorption energies of H₂ for the systems studied here are within 0.11–0.16 eV/H₂ which is a recommended range for reversible hydrogen physisorption under standard test conditions. This study may stimulate experimental efforts to check the claims of high-capacity, stable and reversible hydrogen adsorption reported here.     

A novel lithium decorated N-doped 4,6,8-biphenylene for reversible hydrogen storage: Insights from density functional theory

Two-dimensional (2D) carbon-based (C-based) and carbon-nitrogen (C–N) materials have great potential in the energy harvest and storage fields. We investigate a novel carbon biphenylene (C468) consisting of four-, six- and eight-membered rings of sp² carbon atoms (Fan et al., Science, 372:852-6 (2021)) for hydrogen storage. Using first-principles based Density functional theory calculations, we study the geometrical and electronic properties of C468 and N-doped C468. Lithium (Li) atoms were symmetrically adsorbed on both sides of the substrate, and their adsorption positions were determined. The maximum gravimetric density of hydrogen (H₂) adsorbed symmetrically on both sides of Li atom was studied within the scope of physical adsorption process (−0.2 eV/H₂ ∼ −0.6 eV/H₂). Li-decorated C468 can adsorb 8 upper hydrogen molecules and 8 lower hydrogen molecules, and Li-decorated N-doped C468 can adsorb 9 upper hydrogen molecules and 9 lower hydrogen molecules. The gravimetric densities of Li-decorated C468 and Li-decorated N-doped C468 can reach 9.581 wt% and 10.588 wt%, respectively. Our findings suggest significant insights for using Li-decorated C468 and Li-decorated N-doped C468 as hydrogen storage candidates and effectively expand the application scope of C-based materials and C–N materials.     

Promotion of H2 adsorption performance on InN monolayer by embedding Cu atom: A first-principles study

Hydrogen energy as a clean energy has great application potential, and finding efficient hydrogen storage materials has become the current research hotspot. This work studied the structure, electronic properties, thermodynamic properties and H₂ adsorption performance of InN, N-defect (V_N–InN), In-defect (V_In–InN), Cu atom substitutes N atom embedded InN (Cu/V_N–InN) and Cu atom substitutes In atom embedded InN (Cu/V_In–InN) by density functional theory (DFT). The results show that all of the five InN materials have good thermal stability at room temperature (300 K), and the structural stability of the defective InN increases after embedding of Cu atom. Meanwhile, the hydrogen interaction on the five InN materials was investigated. Cu/V_In–InN has the best performance for H₂ adsorption among the five InN materials. The adsorption energy for Cu/V_In–InN can reach ?0.769 eV, which is 4.5 times better than original InN nanosheet. After adsorbing 5H₂ molecules, the average adsorption energy is ?0.399 eV that indicates Cu/V_In–InN structure still has possibility of adsorbing more hydrogen molecules and it has the potential to become a new hydrogen storage material.     

Two-dimensional B7P2: Dual-purpose functional material for hydrogen evolution reaction/hydrogen storage

It is well known that the development of dual-purpose materials is more significant and valuable than single-use materials due to the diversity of their use purposes. Based on density functional theory (DFT), the hydrogen evolution/hydrogen storage characteristics of two-dimensional (2D) B₇P₂ monolayer are systematically studied in this paper, focusing on the key word of clean energy-“hydrogen”. The results show that the B₇P₂ monolayer can be used as a stable metal-free decorated catalyst for hydrogen evolution reaction (HER), which is renewable and environmentally friendly. The calculated Gibbs free energy (ΔG_H1) is 0.06 eV, which is comparable or even better than that of Pt catalyst (ΔG_H1 = ?0.09 eV). In addition, we also found that the increase of hydrogen coverage and strain driving (?2%–2%) did not further enhance the HER activity of B₇P₂ monolayer, showing a poor ΔG_H1. In the aspect of hydrogen storage, we have investigated the hydrogen storage performances of alkali-metal (Li, Na and K) doped B₇P₂. It is found that in the fully loaded case, B₇P₂Li₆ is a promising hydrogen storage material with a 7.5 wt% H₂ content and 0.15 eV/H₂ average hydrogen adsorption energy (E_ave). Moreover, ab initio molecular dynamics (AIMD) calculations show that there is no dynamic barrier for H₂ desorption of Li-decorated B₇P₂ monolayer. In conclusion, our results indicate that the B₇P₂ monolayer is not only an excellent catalyst for HER, but also a promising hydrogen storage medium.