In-situ growth of Fe–Co Prussian-blue-analog nanocages on Ni(OH)2/NF and the derivative electrocatalysts with hierarchical cage-on-sheet architectures for efficient water splitting

To design an efficient and cost-effective electrocatalyst based on Prussian blue and its analogs are a promising choice to realize energy transformation and storage via water-splitting. Herein, a facile and practical method is developed to in-situ grow Fe–Co Prussian-blue-analog (PBA) nanocages with an open hole in each face center on Ni(OH)₂/NF substrate to form the hierarchical cage-on-plate structure. Furthermore, the Fe–Co PBA nanocages attached to Ni(OH)₂/NF plates are hydrogenated and nitrogenized into FeCoNi/NF and FeCoNiN/NF electrodes, respectively. As-prepared electrodes successfully retain the 3D hierarchical micro-nano structures of Fe–Co PBA@Ni(OH)₂/NF precursor and can be used as a bifunctional water-splitting catalyst for overall water splitting. Compared to FeCoNi/NF, FeCoNiN/NF shows more efficiency and durability in the electrolytic water splitting tests in alkaline media. For the FeCoNiN/NF electrocatalyst, ultralow overpotentials for hydrogen evolution reaction (HER) are only 56 and 290 mV at current densities of 10 and 500 mA cm^?2. Meanwhile, overpotentials for oxygen evolution reaction (OER) are 267 and 374 mV at current densities of 50 and 500 mA cm^?2. The FeCoNiN/NF electrode can act both the cathode and the anode for overall water splitting, this electrolyzer only requires a cell voltage of 1.492 V to afford a current density of 10 mA cm^?2. This electrolyzer can stably deliver a viable high current density of 625 mA cm^?2 for 40 h to meet the condition of industrial application.     

3D V–Ni3S2@CoFe-LDH core-shell electrocatalysts for efficient water oxidation

Studying cheap and efficient electrocatalysts is of great significance to promote the sluggish kinetics of oxygen evolution reaction (OER). Here, we adopted a simple two-step method to successfully prepare the 3D V–Ni₃S₂@CoFe-LDH core-shell electrocatalyst. The V–Ni₃S₂@CoFe-LDH/NF shows excellent OER performance with low overpotential (190 mV at 10 mA/cm² and 240 mV at 50 mA/cm²), small Tafel slope (26.8 mV/dec) and good long-term durability. Excitingly, to reach the same current density, V–Ni₃S₂@CoFe-LDH/NF electrode even needs much smaller overpotential than RuO₂. Furthermore, the outstanding OER activity of V–Ni₃S₂@CoFe-LDH/NF is ascribed to the following reasons: (1) V–Ni₃S₂ nanorod cores improve the conductivity and ensure the fast charge transfer; (2) CoFe-LDH nanosheets interconnected with each other provide more exposed active sites; (3) the unique 3D core-shell structures are favorable for electrolyte diffusion and gas releasing. Our work indicates that building 3D core-shell heterostructure will be a useful way to design good electrocatalysts.     

Superhydrophilic 3D peony flower-like Mo-doped Ni2S3@NiFe LDH heterostructure electrocatalyst for accelerating water splitting

Constructing highly efficient nonprecious electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential to improve the efficiency of overall water splitting, but still remains lots of obstacles. Herein, a novel 3D peony flower-like electrocatalyst was synthesized by employing Mo–Ni₂S₃/NF nanorod arrays as scaffolds to in situ growth ultrathin NiFe LDH nanosheets (Mo-Ni₂S₃@NiFe LDH). As expected, the novel peony flower-like Mo–Ni₂S₃@NiFe LDH displays superior electrocatalytic activity and stability for both OER and HER in alkaline media. Low overpotentials of only 228 mV and 109 mV are required to achieve the current densities of 50 mA cm^?2 and 10 mA cm^?2 for OER and HER, respectively. Additionally, the material remarkably accelerates water splitting with a low voltage of 1.54 V at 10 mA cm^?2, which outperforms most transition metal electrodes. The outstanding electrocatalytic activity benefits from the following these features: 3D peony flower-like structure with rough surface provides more accessible active sites; superhydrophilic surfaces lead to the tight affinity between electrode with electrolyte; metallic Ni substrate and highly conductive Mo–Ni₂S₃ nanorods scaffold together with offer fast electron transfer; the nanorod arrays and porous Ni foam accelerate gas bubble release and ions transmission; the strong interfacial effect between Mo-doped Ni₃S₂ and NiFe LDH shortens transport pathway, which are benefit for electrocatalytic performance enhancement. This work paves a new avenue for construction and fabrication the 3D porous structure to boost the intrinsic catalytic activities for energy conversion and storage applications.     

Facile one-pot synthesis of binder-free nano/micro structured dendritic cobalt activated nickel sulfide: a highly efficient electrocatalyst for oxygen evolution reaction

Reasonable design and preparation of non-noble metal electrocatalysts with predominant catalytic activity and long-term stability for oxygen evolution reaction (OER) are essential for electrocatalytic water splitting. Ni foam (NF) is highlighted for its 3D porous structure, impressive conductivity and large specific surface area. Herein, nano/micro structured dendritic cobalt activated nickel sulfide grown on 3D porous NF (Co–Ni₃S₂/NF) has been successfully synthesized by one-step hydrothermal method. Due to the ingenious incorporation of Co, Co–Ni₃S₂/NF electrode shows auspicious electrocatalytic performance for OER compared with Ni₃S₂/NF electrode. As a result, Co–Ni₃S₂/NF needs overpotential of only 274 and 459 mV at current density of 10 and 50 mA cm⁻², respectively, while Ni₃S₂/NF requires overpotential of 344 and 511 mV. At potential of 2.0 V (vs. RHE), Co–Ni₃S₂/NF displays current density of 191 mA cm⁻², while Ni₃S₂/NF just attains current density of only 135 mA cm⁻². Moreover, Co–Ni₃S₂/NF demonstrates excellent stability for uninterrupted OER in alkaline electrolyte. The strategy of designing and preparing cobalt activated nickel sulfide grown on NF renders a magnificent prospect for the development of metal-sulfide-based oxygen evolution catalysts with excellent electrocatalytic performances.     

Adjusting electronic structure coupling of Fe–Ni2P (NiFeP-MOF) multilevel structure for ultra-activity and durable catalytic water oxidation

Efficient electrocatalyst for alkaline oxygen evolution reaction is the critical core to the wide application of metal-air energy storage and water electrolysis hydrogen energy. Therefore, appropriate design of highly active and stable non-noble metal oxygen evolution electrocatalyst with good electronic structure and multilevel structure is both a goal and a challenge. Here, we report a Fe–Ni₂P electrocatalyst (NiFeP-MOF) with multilevel structure, which was obtained by anion exchange on the basis of Fe–Ni(OH)₂ (NiFe-MOF) grown on nickel foam in situ by solvothermal method. As expected, Fe substitution regulates the Ni oxidation state in the NiFeP-MOF and realizes electronic structure coupling, showing a highly active and stable oxygen evolution reaction (OER) in alkaline electrolyte solution. Specifically, the NiFeP-MOF demonstrates an ultralow overpotentials (232 mV, 10 mA cm^?2; 267 mV 100 mA cm^?2), respectively, an extremely small Tafel slope (34 mV dec^?1). Separately, the electrocatalyst shows an excellent cycle stability at 10 mA cm^?2 for 12 h (43,200 s). More importantly, this work come up with an available policy for the preparation of excellent alkaline hydrolysis electrolysis catalysts and air cathodes with excellent performance.     

A nano-spherical structure Ni3S2/Ni(OH)2 electrocatalyst prepared by one-step fast electrodeposition for efficient and durable water splitting

Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni₃S₂/Ni(OH)₂ dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni₃S₂, the existence of heterostructure and Ni(OH)₂ co-catalyst function greatly improves the overall water splitting performance of Ni₃S₂/Ni(OH)₂–NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm^?2 for HER and 249 mV at 20 mA cm^?2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm^?2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm^?2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Self-supported iron-doped nickel sulfide as efficient catalyst for electrochemical urea and hydrazine oxidation reactions

The electrochemical oxidation of urea and hydrazine over self-supported Fe-doped Ni₃S₂/NF (Fe–Ni₃S₂/NF) nanostructured material is presented. Among the various reaction conditions Fe–Ni₃S₂/NF-2 prepared at 160 °C for 8 h using 0.03 mM Fe(NO₃)₃ shows the best results for the hydrazine and urea oxidation reactions. The potential values of 0.36, 1.39, and 1.59 V are required to achieve the current density of the 100 mA cm^?2 in 1 M hydrazine (Hz), 0.33 M urea, and 1 M KOH electrolyte, respectively. The onset potential in 1 M KOH, 0.33 M Urea +1 M KOH, and 1 M Hz + 1 M KOH values are 1.528, 1.306, and 0.176 respectively. The Fe–Ni₃S₂/NF-2 shows stable performance at 10 mA cm^?2 until 50 h and at 60 mA cm^?2 over the 25 h. A cell of PtC//Fe–Ni₃S₂/NF-2 requires the potential of 0.49, 1.46, and 1.59 V for the hydrogen production in 1 M Hz + 1 M KOH, 0.33 M Urea +1 M KOH, and 1 M KOH electrolyte, respectively, at a current density of 10 mA cm^?2, and almost 90% stable for the hydrogen production over the 80 h in all electrolytes. The improvement of the chemical kinetics of urea and hydrazine oxidation is due to the synergistic effect of the adsorption and fast electron transfer reaction on Fe–Ni₃S₂/NF-2. The doped Fe ion facilitates the fast electron transfer and the surface of Ni₃S₂ support to the urea and hydrazine molecule adsorption.     

Porous flower-like nickel nitride as highly efficient bifunctional electrocatalysts for less energy-intensive hydrogen evolution and urea oxidation

Finding a suitable replacement for the high potential of anodic water electrolysis (oxygen evolution reaction (OER)) is significant for hydrogen energy storage and conversion. In this work, a simple and scalable method synthesizes a structurally unique Ni₃N nanoarray on Ni foam, Ni₃N-350/NF, that provides efficient electrocatalysis for the urea oxidation reaction (UOR) that transports 10 mA cm⁻² at a low potential of 1.34 V. In addition, Ni₃N-350/NF exhibits electro-defense electrocatalytic performance for hydrogen evolution reaction, which provides a low overpotential of 128 mV at 10 mA cm⁻². As proof of concept, all-water-urea electrolysis measurement is carried out in 1 M KOH with 0.5 M Urea with Ni₃N-350/NF as cathode and anode respectively. Ni₃N-350/NF||Ni₃N-350/NF electrode can provide 100 mA cm⁻² at a voltage of only 1.51 V, 160 mV less than that of water electrolysis, which proves its commercial viability in energy-saving hydrogen production.     

Promoted oxygen evolution reaction efficiency by Ni3S2/WO3 nanocomposite anchored over rGO

To develop a high-efficient catalyst for oxygen evolution reaction (OER), creating high current densities at low overpotentials is highly desirable. Herein, an effective and low cost catalyst based on anchoring Ni₃S₂/WO₃ nanocomposite over the reduced graphene oxide (rGO) was hydrothermaly synthesized and characterized using spectroscopic and microscopic techniques, and its electrochemical parameters as a suitable OER electrocatalyst in alkaine media at surface of nickel foam (NF) was studied. Electrochemical measurements showed that, anchored Ni₃S₂/WO₃ on rGO increased ionic conductivity, surface area, active sites of electrocatalyst, decreased the charge transfer resistance and exhibit the overpotential of 280 mV to reach 50 mA cm^?2, with a Tafel slope of ～48 mV/dec and good stability for the OER in comparison to other tested composites. As a result, this catalyst can work at high and low current densities for a long time.     

Hairy sphere-like Ni9S8/CuS/Cu2O composites grown on nickel foam as bifunctional electrocatalysts for hydrogen evolution and urea electrooxidation

The urea solution electrolysis has become more attractive than water splitting, because it not only produces clean H₂ via the cathodic hydrogen evolution reaction (HER) with lower cell voltage, but also treats sewage containing urea through anodic urea oxidation reaction (UOR). However, lack of efficient electrocatalysts for HER and UOR has limited its development. Herein, hairy sphere -like Ni₉S₈/CuS/Cu₂O composites were synthesized on nickel foam (NF) in situ by a two-step hydrothermal method. The Ni₉S₈/CuS/Cu₂O/NF exhibited good electrocatalytic activity for both HER (?0.146 V vs. RHE to achieve 10 mA cm^?2) and UOR (1.357 V vs. RHE to achieve 10 mA cm^?2). Based on the bifunctional properties of Ni₉S₈/CuS/Cu₂O/NF, a dual-electrode urea solution electrolytic cell was constructed, which only needed a low voltage of 1.47 V to reach a current density of 10 mA cm^?2, and displayed a good stability during a 20-h test. In addition, the reason for the good catalytic activity of Ni₉S₈/CuS/Cu₂O/NF was analyzed and the UOR mechanism was discussed in detail. Our research shows that Ni₉S₈/CuS/Cu₂O/NF is a very promising low-cost dual-function electrocatalyst, which can be used for high-efficiency electrolysis of urea solution to produce hydrogen and treat wastewater.     

Coupling NixSy-Ni2P heterostructure nanoarrays on Ni foam as environmentally friendly electrocatalyst for overall water splitting

The development of efficient, cheap and stable electrodes is the key to achieve the industrialization of hydrogen production from electrochemical water splitting. In this paper, Ni_xS_y-Ni₂P mixtures on Ni foam (Ni_xS_y-Ni₂P/NF) were synthesized by hydrothermal process followed by sulfurization and phosphorization approach. The combination of Ni_xS_y and Ni₂P exposes a large number of active sites, thus greatly improving the catalytic activity of the material. As expected, the Ni_xS_y-Ni₂P/NF material exhibits ultra-small overpotentials of 211 and 320 mV for water oxidation reaction at the current densities of 10 and 100 mA/cm², respectively. What is noteworthy is that the material also present superior hydrogen evolution reaction properties (122 mV@10 mA cm^?2). Moreover, when the material is acted as a bifunction electrode to drive the overall water splitting, only a cell voltage of 1.54 V is required to drive a current density of 10 mA/cm², which is one of the superior catalytic properties reported up to now. Experimental results show that the good electrochemistry performance of the Ni_xS_y-Ni₂P/NF material is attributed to the improved charge transfer rate, exposure of more active site and superior electrical conductivity. This work provides an effective way to explore environmentally friendly catalysts based on transition metal sulfide and phosphide.     

Ultrathin-layered MoS2 hollow nanospheres decorating Ni3S2 nanowires as high effective self-supporting electrode for hydrogen evolution reaction

High-activity and cost-effective transition metal sulfides (TMSs) have attracted tremendous attention as promising catalysts for hydrogen evolution reaction (HER). However, a significant challenge is the simultaneous construction of abundant electrochemical active sites and the fast electronic transmission path to boost a high-efficient HER. Herein, we demonstrate a facile one-step hydrothermal preparation of MoS₂ hollow nanospheres decorating Ni₃S₂ nanowires supported on Ni foam (NF), without any other additional template, surfactant or annealing. In this three-dimensional (3D) heterostructure, the ultrathin-layered MoS₂ hollow nanospheres contribute to the promotion of the total surface area and the electrochemical active sites. Meanwhile, the Ni₃S₂ nanowires are beneficial to the high electrical conductivity. Consequently, the optimized MoS₂/Ni₃S₂/NF-200-24 electrocatalyst presents an extremely superior HER activity to that of individual MoS₂/NF and Ni₃S₂/NF. The HER overpotentials are 85 mV at 10 mA cm⁻² and 189 mV at 100 mA cm⁻², which are also comparable with the state-of-the-art 20% Pt/C/NF electrode at both low and high current.     

Construction of NiCo2S4/Ni3S2 nanoarrays on Ni foam substrate as an enhanced electrode for hydrogen evolution reaction and supercapacitors

Developing a multifunctional and sustainable electrode material for hydrogen evolution reaction and supercapacitors is a highly feasible avenue for producing the high energy density and renewable energies. In our study, nanostructured NiCo₂S₄/Ni₃S₂/NF nanoarrays are rational developed in experiments via a simple hydrothermal reaction. Ascribed to the 3D nanostructured NiCo₂S₄/Ni₃S₂ with numerous exposure active sites and large contact areas for the electrolyte, the binder-free feature of NiCo₂S₄/Ni₃S₂/NF facilitates a low charge transfer resistance, as well as the synergetic effect of NiCo₂S₄ and Ni₃S₂. The obtained electrocatalyst showed ultrahigh electrocatalytic activity with an overpotential of 111 mV at 10 mA cm⁻² and a Tafel slope of 57 mV dec⁻¹. In addition, the electrode showed an area specific capacity of 6.13 F cm⁻² at 10 mA cm⁻² and superior rate capability (2.72 F cm⁻² at 80 mA cm⁻²), accompanied by excellent cycling stability. This results presented in our work can provide an effective strategy for rational design of other hybrid materials with excellent electrochemical performance in the application of electrocatalysis and supercapacitors.     

Super-hydrophilic/super-aerophobic Ni2P/Co(PO3)2 heterostructure for high-efficiency and durable hydrogen evolution electrocatalysis at large current density in alkaline fresh water,alkaline seawater and industrial wastewater

Seawater electrolysis has become an efficient method which makes full use of natural resources to produce hydrogen. However, it suffers high energy cost and chloride corrosion. Herein, we first present a Ni₂P/Co(PO₃)₂/NF heterostructure in which Co(PO₃)₂ with the nano-rose morphology in-situ grown on the rough Ni₂P/NF. The unique 3D nano-rose structure and the optimized electronic structure of the heterostructure enable Ni₂P/Co(PO₃)₂/NF super-hydrophilic and super-aerophobic characteristics, and highly facilitate hydrogen evolution reaction (HER) kinetics in alkaline fresh water, alkaline seawater and even industrial wastewater at large current density, which is rarely reported. Significantly, at large current densities, Ni₂P/Co(PO₃)₂/NF only requires overpotentials of 217 and 307 mV for HER to achieve 1000 mA cm⁻² in alkaline fresh water and alkaline seawater, respectively, and requires an overpotential of 469 mV for HER to deliver 500 mA cm⁻² in industrial wastewater. Furthermore, the overall seawater splitting system in the two-electrode electrolyzer only requires voltage of 1.98 V to drive 1000 mA cm⁻², which also demonstrates significant durability to keep 600 mA cm⁻² for at least 60 h. This study opens a new avenue of designing high efficiency electrocatalysts for hydrogen production at large current densities in alkaline seawater and industrial wastewater.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Vermicular Ni3S2–Ni(OH)2 heterostructure supported on nickel foam as efficient electrocatalyst for hydrogen evolution reaction in alkaline solution

Alkaline solution is considered to be more suitable for industrial application of hydrogen production by water electrolysis. However, most of the low-cost electrocatalyts such as Ni₃S₂ has poor ability to dissociate HO–H, resulting in unsatisfied hydrogen evolution performance in alkaline media. In this paper, a novel vermicular structure of Ni₃S₂–Ni(OH)₂ hybrid have been successfully prepared on nickel foam substrate (v-Ni₃S₂–Ni(OH)₂/NF) through a facile two-step containing hydrothermal and electrodeposition processes. The heterostructure consists of rod-like Ni₃S₂ and Ni(OH)₂ nanosheets, in which Ni(OH)₂ is coated on the surface of Ni₃S₂. This structure not only constructs a fast electron transfer channel but also possesses rich heterointerface, thus accelerating the Volmer step and allowing more active sites of Ni₃S₂ to functioning well. As a result, v-Ni₃S₂–Ni(OH)₂/NF exhibited excellent electrocatalytic activity toward HER in 1.0 M KOH solution. It only needs 78 mV and 137 mV to drive current density of 10 mA cm⁻² and 100 mA cm⁻². Moreover, the catalytic stability of this electrocatalyst in alkaline solution is also satisfactory.     

Potentiostatic electrodeposition of cost-effective and efficient Ni–Fe electrocatalysts on Ni foam for the alkaline hydrogen evolution reaction

The hydrogen evolution reaction (HER) using earth-abundant noble-metal-free catalysts has gained substantial interest in electrocatalytic water splitting technologies, particularly in water-alkali electrolyzers. The development of highly-efficiency and durable inexpensive electrocatalysts to accelerate the kinetics of HER is still a formidable challenge. In this study, nickel–iron (Ni–Fe) electrocatalyst directly grown on backbones of Ni foam (NF) substrate was facile prepared via one-step potentiostatic electrodeposition method. The obtained Ni–Fe electrocatalyst exhibits a film-like structure. Owing to high electrical conductivity and composition optimization, the synthesized Ni–Fe electrocatalyst with Ni/Fe atomic ratio of c.a. 65:35 possesses an attractive electrocatalytic activity with low overpotentials of 142, 205, and 239 mV at 10, 50, and 100 mA·cm^?2 in alkaline electrolyte, respectively.     

Interlaced rosette-like MoS2/Ni3S2/NiFe-LDH grown on nickel foam: A bifunctional electrocatalyst for hydrogen production by urea-assisted electrolysis

In targeting the most important energy and environmental issues in current society, the development of low-cost, bifunctional electrocatalysts for urea-assisted electrocatalytic hydrogen (H₂) production is an urgent and challenging task. In this work, interlaced rosette-like MoS₂/Ni₃S₂/NiFe-layered double hydroxide/nickel foam (LDH/NF) is successfully synthesized by a two-step hydrothermal reaction. Due to its unique interlaced heterostructure, MoS₂/Ni₃S₂/NiFe-LDH/NF exhibits excellent bifunctional catalytic activity towards the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER) in 1.0 M KOH with 0.5 M urea. In a concurrent two-electrode electrolyser (MoS₂/Ni₃S₂/NiFe-LDH/NF(+,-)), only voltage of 1.343 V is required to reach 50 mA cm⁻², which is 216 mV lower than for pure water splitting. Furthermore, after 16 h of urea electrolysis in 1.0 M KOH with 0.5 M urea, the current density remains at 98% of the original value. Thus, the catalyst is not only favorable for H₂ production, but also has great significance for the problem of urea-rich wastewater treatment.     

Fluff spherical Co–Ni3S2/NF for enhanced hydrogen evolution

Ni₃S₂ is a kind of HER catalyst electrode with high efficiency and easy preparation. However, due to the weak electrochemical adsorption capacity of water molecules at the Ni site, it is not conducive to the dissociation of water molecules. At the same time, strong sulfur-hydrogen bond is easily formed at the S site, which greatly hinders the desorption and bonding of hydrogen atom to produce hydrogen. Hydrogen evolution performance of Ni₃S₂ in alkaline media needs to be improved. In this paper, fluff spherical Co–Ni₃S₂ was grown in situ on nickel foam by two-step hydrothermal method successfully. By doping cobalt ions, the strong interaction of S–H bond on Ni₃S₂ surface was weakened, the adsorption and dissociation of water molecules were promoted, and the catalyst was exposed to more reactive centers, so as to improve the hydrogen evolution performance of cathodic reduction reaction. Electrochemical test and Transient Photovoltage (TPV) tests show that Co–Ni₃S₂ has fast reaction kinetics and high electron transfer rate, especially it only needs 148 mV low overpotential to reach 10 mA cm^?2 in 1.0 M KOH alkaline electrolyte, which is better than Ni₃S₂/NF (250 mV). In addition, Co–Ni₃S₂ also has excellent electrochemical stability. Density functional theory (DFT) calculations confirm that the optimized adsorption energy enables the catalyst to exhibit excellent HER activity. This work provides useful guidance to construction of effective nickel related HER catalysts.