3d transitional-metal single atom catalysis toward hydrogen evolution reaction on MXenes supports

Single atom catalysis involving atomically dispersed metal active sites on the appropriate supports is the effective way to magnify the catalytic efficiency and reduce the cost. By performing the first-principles calculations, we studied the anchoring of 3d transitional-metal single atoms M (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn) on the surfaces of MXenes Cr₂CO₂ and Mo₂CO₂ and the catalytic activity of the single atom sites for hydrogen evolution reaction (HER). Sixteen single atom sites, M-Cr₂CO₂ (M = Sc, Ti, V, Cr, Mn, Fe, Co, Cu and Zn) and M-Mo₂CO₂ (M = Sc, Ti, V, Cr, Mn, Fe and Zn) have been chosen via examining the energetical and thermal stability of the isolated M atoms on the substrates. More importantly, we have calculated the Gibbs free energy change (ΔG_H) of H adsorption on the surface of M anchored Cr₂CO₂ and Mo₂CO₂ and find that Cr, Fe, Zn on Cr₂CO₂ and Sc, V on Mo₂CO₂ are the promising single atom active sites toward HER. Additionally, our results show that M atoms adsorbing turns the nearby sites to be active for catalyzing HER. MXenes Cr₂CO₂ and Mo₂CO₂, in terms of the supporting not only stabilize but also works together with the anchored single atom M as active catalyst toward HER.     

High-throughput screening of transition metal single-atom catalyst anchored on Janus MoSSe basal plane for hydrogen evolution reaction

Considerable efforts have been made to enhance the hydrogen evolution reaction (HER) catalytic performance of Janus MoSSe monolayer, which have been considered to be a promising candidate due to the unique asymmetry structure. However, the activation effect remains non-optimal for the inert Janus MoSSe basal plane at present. Herein, a train of transition metal (TM) atoms were anchored on the S-/Se-/Mo-defective MoSSe basal plane to screen effective TM single-atom catalysts for HER through density functional theory (DFT) computations. Interestingly, the single Co atom anchored on Mo-defective MoSSe and the single Zn or Cd atom anchored on S-defective MoSSe were judged to possess excellent HER performance yielding a near-zero ΔG_H (ΔG_H = ?0.050, ?0.095, ?0.098 eV, respectively), which is comparable to the optimized Pt-SACs. The enhanced HER activity is attributed to the doping of TM atoms (Co, Zn and Cd) which improves the conductivity of the original MoSSe and offers unoccupied states near the Fermi level decreasing the energy barrier of electrons transfer between H and TMs@MoSSe surface. In addition, the change of unoccupied antibonding states of active atoms leads to appropriate interaction between the active sites and H. The hybridization between H-s orbital and the TMs@MoSSe systems around the Fermi level also suggests the formation of stable bonding-antibonding hydrogen adsorption states. This work reveals an effective way of activating MoSSe basal plane for HER.     

Hydrogen evolution reaction on in-plane platinum and palladium dichalcogenides via single-atom doping

Searching for the catalysts with excellent catalytic activity and high chemical stability is the key to achieve large-scale production of hydrogen (H₂) through hydrogen evolution reaction (HER). Two-dimensional (2D) platinum and palladium dichalcogenides with extraordinary electrical properties have emerged as the potential candidate for HER catalysts. Here, chemical stability, HER electrocatalytic activity, and the origin of improved HER performance of Pt/Pd-based dichalcogenides with single-atom doping (B, C, N, P, Au, Ag, Cu, Co, Fe, Ni, Zn) and vacancies are explored by first-principles calculations. The calculated defect formation energy reveals that most defective structures are thermodynamically stable. Hydrogen evolution performance on basal plane is obviously improved by single-atoms doping and vacancies. Particularly, Zn-doped and Te vacancy PtTe₂ have a ΔG_H value close to zero. Moreover, defect engineering displays a different performance on HER catalytic activity in sulfur group elements, in order of S < Te < Se in Pd-based chalcogenides, and S < Se < Te in Pt-based chalcogenides. The origin of improved hydrogen evolution performance is revealed by electronic structure and charge transfer. Our findings of the highly activating defective systems provide a theoretical basis for HER applications of platinum and palladium dichalcogenides.     

Single Ru atom supported on defective graphene for water splitting: DFT and microkinetic investigation

We present a comprehensive understanding of sing Ru atom supported on defective graphene for water splitting using density functional theory calculations and microkinetic analysis. The structural and electronic properties of Ru atom supported single vacancy graphene (SVG), double vacancy graphene (DVG) and Stone-Wales graphene (SWG) are systematically investigated. We find that the Ru atom can be trapped effectively by the defects on each defective graphene surfaces. The binding strength of the single Ru atom onto defective graphene surfaces follows the order: Ru@SVG > Ru@DVG > Ru@SWG. After binding, the d-band centers in Ru@SVG, Ru@DVG and Ru@SWG are about ?1.67, ?1.36, ?1.02 eV, respectively. We find that the reaction barrier of H₂O splitting decreases with increase of Ru d-band center. The reaction activity of H₂O splitting are as follows: Ru@SVG < Ru@DVG < Ru@SWG. The splitting of water molecule on Ru@SWG surface only need a small activation energy of 0.43 eV. In addition, in the temperature range of 300–600 K, the Ru@SWG presents better reaction activity for H₂O splitting. The reaction rate and turnover frequency are orders of magnitude larger than that on Ru@SVG and Ru@DVG. Overall, our study provides insights on the significant role of a single metal atom on defective graphene.     

Small Pd cluster adsorbed double vacancy defect graphene sheet for hydrogen storage: A first-principles study

Stability and electronic properties of small Pd_n clusters (n = 1–5), adsorbed on different types of double vacancy (DV) defect graphene sheets are thoroughly investigated by both density functional theory (DFT) and molecular dynamics (MD). Defect bridge sites of DV(555-777) defect graphene sheet are identified to be the most favorable for Pd₄ cluster adsorption. MD calculations, performed using a canonical ensemble, showed this system to be highly stable up to 800 K. Much better hybridization between C 2p and Pd 4d and 5s orbitals near Fermi level as well as higher charge transfer to graphene sheet was found to be the governing reason for enhanced stability of Pd₄ cluster on DV(555-777) defect site. Comparative analysis of H₂ storage on Pd₄ cluster adsorbed pristine and DV(555-777) defect graphene sheet showed, while adsorption energy/H₂ molecule for both cases lie well within desirable energy window for a hydrogen storage media, the later is much more efficient energetically as distorted in plane sp² hybridization reduces the saturations of C–C bonds in the defect regions, making more electron density available for bonding; which leads to higher net charge gain of Pd₄ cluster and higher charge sharing with H₂ molecule.     

Boosting the kinetics of oxygen and hydrogen evolution in alkaline water splitting using nickel ferrite /N-graphene nanocomposite as a bifunctional electrocatalyst

Design, synthesize and application of metal-oxide based bifunctional electrocatalysts with sustainability and efficient activity in water splitting is significant among the wide spread researches in energy applications. Herein, bifunctional electrocatalysts composed of NiFe₂O₄ dispersed on N-doped graphene has been prepared by in-situ polymerization and characterized for further bifunctional catalytic performances. The electrocatalyst exhibited bespoken performances as cathode in HER as well as anode in OER at alkaline electrolyte. The nanocomposite N-doped graphene/NiFe₂O₄ (NGNF) exhibited low overpotential of 184 mV in HER and 340 mV in OER for attaining the current density of 10 mA/cm² which is far better than their pristine counterparts. Similarly its Tafel slopes were found to be 82.9 mV/dec and 93.2 mV/dec for HER and OER. As an electrocatalyst NGNF outperformed pure nickel ferrite and graphene/NiFe₂O₄ (GNF) as bifunctional electrocatalyst with low overpotential and Tafel slopes. This indicates the impact of graphene and N-doping on graphene in the activity of pure NF. The graphene in the composite and the N-dopants provoked the catalytic activity and tuned the electron transfer and interaction with the electrolyte. Thus, herein we endow with strategies of preparing highly efficient bifunctional electrocatalysts by coupling spinel oxides and N-doped graphene for HER and OER.     

First principles of Si-doped BC2N single layer for hydrogen evolution reaction (HER)

Understanding the Hydrogen Evolution Reaction (HER) process is fundamental to use hydrogen as a sustainable (clean and renewable) energy source. Using first-principles calculations, we study the HER process when Si-doped a h-BC₂N single layer. The pristine BC₂N presents semiconducting properties with a band gap of 1.6–2.0 eV, being appropriate as a catalytic in the water splitting process. When Si is incorporated into the BC₂N monolayer, we obtain that the most stable site (lower formation energy) occurs when the Si atom replaces a C atom (Si_C). The Si atom moves out of the plane forming a buckling structure and the semiconducting properties are maintaining without spin effects. However, Si_B and Si_N give rise to two unpaired spin electronic levels inside the band gap and a magnetic moment of 1 μ_B. The adsorption energies of an H₂ molecule on the top of the Si atom are in the range of 50–100 meV, which are greater than the calculated ones for H₂ adsorbed on graphene and h-BN nanosystems but still low to be considered as an optimized medium for hydrogen storage. In addition, we observe that dispersive forces (van der Waals interactions) are responsible for half part of the adsorption energies. Strain due to the difference between the atomic radius of Si and C as well as the less stability of the Si–H bonds compared to the C–H ones leads to the Gibbs free energy (ΔG1) for hydrogen adsorbed on Si_C near zero, showing that Si-doped h-BC₂N is a potential system for HER.     

Strain and defect engineering of graphene for hydrogen storage via atomistic modelling

The adsorption of hydrogen molecules on monolayer graphene is investigated using molecular dynamics simulations (MDS). Interatomic interactions of the graphene layer are described using the well-known AIREBO potential, while the interactions between graphene and hydrogen molecule are described using Lennard-Jones potential. In particular, the effect of strain and different point defects on the hydrogen storage capability of graphene is studied. The strained graphene layer is found to be more active for hydrogen and show 6.28 wt% of H₂ storage at 0.1 strain at 77 K temperature and 10 bar pressure. We also studied the effect of temperature and pressure on the adsorption energy and gravimetric density of H₂ on graphene. We considered different point defects in the graphene layer like monovacancy (MV), Stone Wales (SW), 5-8-5 double vacancy (DV), 555–777 DV, and 5555-6-7777 DV which usually occur during the synthesis of graphene. At 100 bar pressure, graphene with 1% concentration of MV defects leads to 9.3 wt% and 2.208 wt% of H₂ storage at 77 K and 300 K, respectively, which is about 42% higher than the adsorption capacity of pristine graphene. Impact of defects on the critical stress and strain of defected graphene layers is also studied.     

Nickel-decorated single vacancy phosphorene – A favourable candidate for hydrogen storage

This work studies the effect of nickel decoration on the hydrogen adsorption properties of single vacancy (SV) defective phosphorene. First principles simulations of Ni decoration show that the SV defective surfaces relax to a doped-like structure with the Ni atom in the place of the vacant phosphorus atom. The functionalised surface shows excess negative charge on neighbouring P atoms, making it suitable for sensing purposes. Additionally, the chemical activity of Ni is reduced due to strong bond formation with phosphorus. Both Ni-decorated SV phosphorene systems have H₂ adsorption energies more than 3 times than that of defective phosphorene, with values between ?0.594 eV and ?0.6 eV. The adsorption mechanism of H₂ is a two-fold process involving a small charge transfer from the surface P atoms and weak dipole-dipole interactions between the H₂ molecule and the Ni atom, as the reduced chemical activity of Ni prevents bond formation with H₂. The results demonstrate Ni-decorated SV Phosphorene as a promising candidate for Hydrogen storage and gas sensing applications. Further, decoration on defective phosphorene surfaces can be regarded as a method to control the chemical activity of transition metals for use in applications such as catalysis.     

Activated HER performance of defected single layered TiO2 nanosheet via transition metal doping

Doping engineering has been considered as a viable strategy to obtain highly efficient photocatalysts for hydrogen evolution reaction (HER). Since transition metal doping usually introduces of oxygen vacancy defect in oxide compounds, the first-principles calculations were performed to investigate the HER activity of transition metal-doped lepidocrocite-type TiO₂ nanosheets with oxygen vacancies. Different hydrogen adsorption sites are taken into account here. When adsorbed hydrogen occupies the oxygen vacancy, an optimal HER activity, similar to ideal Pt metal, was obtained in Fe-doped nanosheets. The tunable HER performance was correlated with the d-band center level of dopants. On the other hand, O-p_z band center level is responsible for the hydrogen adsorption free energy in the case of hydrogen adsorbed with the surface oxygen atom. Unexpectedly, for Mn doping cases, the pre-adsorbed hydrogen could activate surface O atom with additional hydrogen adsorption free energy being close to zero. In addition, the strain engineering also could effectively adjust HER activity in defected nanosheets.     

Iron doped mesoporous cobalt phosphide with optimized electronic structure for enhanced hydrogen evolution

We report a self-supporting electrode fabricated by covering iron doped mesoporous cobalt phosphide film on carbon cloth substrate (meso-Fe_xCo_1-xP/CC) for hydrogen evolution reaction (HER). In acidic and alkaline electrolytes, the electrode exhibited excellent catalytic activity and fast kinetics towards the HER, only requiring small overpotentials of 61 mV and 67 mV to drive 10 mA cm^?2, respectively. The superior electrocatalytic activity is attributed to the mesoporous structure with high specific surface area (147.5 m² g^?1) and doping of Fe atom. The mesoporous structure grown on the conductive carbon cloth substrate enables the fully exposure of active sites and the rapid penetration of electrolyte. Additionally, density functional theory (DFT) calculation reveals that the doping of Fe enhances the adsorption of H atoms by shifting the d-band center of Co. Meanwhile, the introduction of Fe lowers the energy barrier for water dissociation, which accelerates the catalytic kinetics in alkaline electrolyte.     

Hydrogen storage in Li decorated and defective pentaoctite phosphorene: A density functional theory study

Hydrogen storage in 2D pentaoctite phosphorene was investigated by density functional theory (DFT) calculations. Defect engineering and Li decoration were adopted to evaluate their effects on the hydrogen storage. The formation energies for two types of point defects, single vacancy (SV) and double vacancy (DV) were calculated. The DFT results showed that pristine pentaoctite had a very weak binding with H₂ molecule. With the defect formation energies in the order of black phosphorene, the point defects marginally improved the binding energy of H₂ molecule. However, Li decoration over pristine and defective substrates enhanced the binding energy of H₂ molecule by 5–10 fold improving from around ?0.03 eV/H₂ to ?0.25 eV/H₂, thereby, resulting a better H₂ storage capacity. PDOS calculation evidenced the charge transfer from Li atom as its key attribute. In addition, multiple Li adatoms were decorated over the substrate at the favorable sites. In Li decorated pristine, SV, and DV defective substrates, up to 5, 6, and 3 H₂ molecules could be absorbed at each Li adatom. The diffusion energy barrier of Li from one favorable site to another was calculated to be an order of magnitude higher that its thermal energy causing an impedance to clustering.     

Atomically dispersed low-cost transition metals catalyze efficient hydrogen evolution on two-dimensional SnO nanosheets

Two-dimensional (2D) electrocatalyst plays an important role in hydrogen production via water splitting. In this work, the first-principles calculation was used to investigate the hydrogen evolution reaction (HER) performance of transition metal (TM) single atom catalysts (SACs) on 2D SnO nanosheets. Among the TM considered (TM = V, Cr, Mn, Fe, Co, Ni, Cu and Pt), V, Fe, Co, Ni, Cu and Pt can effectively improve the catalytic activity of SnO. More importantly, the low-cost Co can exhibit promising HER performance with the Gibbs free energy as low as ~0.015 eV, which is competitive with the precious catalyst Pt. The theoretical exchange current densities of Co SACs can reach ~10⁻¹⁶ A/site. The exciting HER activity is mainly facilitated through the d-d hybridization between the TM and Sn atoms on the SnO surface, which introduces new electron states near the Fermi level. Our work highlights the complexity and diversity of the effect of TM SACs on SnO nanosheets and implies their potential applications as efficient HER electrocatalysts.     

Activation of metal-free porous basal plane of biphenylene through defects engineering for hydrogen evolution reaction

The biggest challenge in the commercial application of electrochemical reduction of water through the hydrogen evolution reaction (HER) is hampered due to the scarcity of inexpensive and efficient catalysts. Herein, we propose a metal-free biphenylene nanosheet, a recently proposed two-dimensional (2D) carbon allotrope, as an excellent HER electrocatalyst. The dynamical and thermal stability of biphenylene nanosheet is validated through phonon dispersion and abinitio molecular dynamics (AIMD) calculations, respectively. At a low H coverage (1/54), the biphenylene nanosheet shows excellent catalytic activity with the Gibbs free energy (ΔG_H1) of 0.082 eV. The Bdoping and C-vacancy in biphenylene further improve ΔG_H1 to −0.016 eV and 0.005 eV, respectively. The interactions between the H atom and the nanosheet are explained through the relative position of the p-band center. Our study opens new possibilities to use non-metallic porous materials as highly efficient electrocatalysts for HER.     

Stabilized Li-decoration and enhanced hydrogen storage on reduced graphene oxides

Hydrogen storage properties of Li-decorated graphene oxides containing epoxy and hydroxyl groups are studied by using density functional theory. The Li atoms form Li₄O/Li₃OH clusters and are anchored strongly on the graphene surface with binding energies of −3.20 and −2.84 eV. The clusters transfer electrons to the graphene substrate, and the Li atoms exist as Li⁺ cations with strong adsorption ability for H₂ molecules. Each Li atom can adsorb at least 2H₂ molecules with adsorption energies greater than −0.20 eV/H₂. The hydrogen storage properties of Li-decorated graphene at different oxidation degrees are studied. The computations show that the adsorption energy of H₂ is −0.22 eV/H₂ and the hydrogen storage capacity is 6.04 wt% at the oxidation ratio O/C = 1/16. When the O/C ratio is 1:8, the storage capacity reaches 10.26 wt% and the adsorption energy is −0.15 eV/H₂. These results suggest that reversible hydrogen storage with high recycling capacities at ambient temperature can be realized through light-metal decoration on reduced graphene oxides.     

Selective and tunable H2 adsorption/sensing performance of W-doped graphene under external electric fields: A DFT study

W-doped graphene and its selective gas adsorption/sensing performance are studied through first-principles density functional theory (DFT) calculations. A single W atom is stably anchored into the graphene plane with a high binding energy of ?9.325 eV. The W-doped graphene interacts more strongly with H₂ compared to NH₃, CH₄, CO, SO₂ or H₂S. The H₂ adsorption system also has a higher adsorption energy of ?1.035 eV. Furthermore, the W-doped graphene exhibits the highest sensor response to H₂ with the largest number of transferred charges and the biggest change in the band gap. A negative electric field improves the interaction between the H₂ and the W-doped graphene by increasing the adsorption energy and promoting charge transfer. However, the adsorption of the H₂ is significantly weakened upon the application of a positive electric field; the adsorbed H₂ is easily desorbed from the W-doped graphene with a modulated recovery time as short as ～4.099 s at room temperature (300 K) upon a +0.4 V Å^?1 increase in the electric field. These results reveal that the W-doped graphene has promising selective and tunable H₂ adsorption/sensing performance upon the application of external electric fields.     

Electrodeposition of Mo-doped NiFex nanospheres on 3D graphene fibers for efficient overall alkaline water splitting

Developing efficient bifunctional catalysts for hydrogen and oxygen evolution reactions (HER/OER) has attracted great interest in hydrogen production from water splitting. In this work, a novel material of Mo-doped NiFe_x nanospheres on 3D graphene fibers (Mo-NiFe_x/3DGFs) has been successfully fabricated through a simple and cheap one-step electrodeposition method. The Mo-NiFe_x/3DGFs possessed ultra-high conductivity and specific surface area, greatly benefiting to electrocatalytic hydrolysis activity. And it was found that Fe element could obviously promote OER process, while Mo doping facilitated both OER and HER reactions. We proved that there existed synergetic roles between Fe and Mo element, which could realize the control of the electronic structure and optimize the adsorption/desorption of intermediates. And electrochemical tests showed that the Mo–Ni/3DGFs exhibited a relatively smaller overpotential of 109.9 mV for HER, while the Mo-NiFe_x/3DGFs presented better OER performance with an overpotential of 240.8 mV at the current density of 100 mA cm^-2 in 1.0 M KOH. Finally, a system for overall water splitting constructed by Mo–Ni/3DGFs||Mo–NiFe_0.68/3DGFs electrodes has a low cell voltage of 1.52 V at 10 mA cm^?2 and long-term stability, exceeding most of literature results. Our findings provide insight into possibilities for the simple synthesis of high-performance and cheap catalysts, and laid the foundation for the practical application of transition metal catalysts.     

Doping sp-hybridized B atoms in graphyne supported single cobalt atoms for hydrogen evolution electrocatalysis

Electrochemical water splitting to hydrogen is considered as a promising approach for clean H₂ production. However, developing highly active and inexpensive electrocatalysts is an important part of the hydrogen evolution reaction (HER). Herein, we present a multifaceted atom (sp²-and sp-hybridized boron) doping strategy to directly fine-modify the electronic structures of the active site and the HER performance by the density functional theory calculations. It is found that the binding strength between the Co atom and the B doped graphyne nanosheets can be enhanced by doping B atoms. Meanwhile, the Co@B₁-GY and Co@B₂-GY catalysts exhibit good thermodynamic stability and high HER catalytic activity. Interestingly, the Co@B₂-GY catalyst has an ideal HER performance with the ΔG_H* value of −0.004 eV. Moreover, the d-band center of the Co atoms is upshifted by the sp²-or sp-hybridized B dopants. The concentrations of the sp-hybridized B atoms have a positive effect on the electrons transformation of the Co atoms. The interaction between the H and Co atoms becomes strong with the increase of the concentrations of the sp-hybridized B atoms and thus the corresponding catalysts show sluggish HER kinetics. This investigation could provide useful guidance for the experimental groups to directly and continuously control the catalytic activity towards HER by precisely doping multifaceted atoms.     

Bifunctional electrocatalysts for water splitting from a bimetallic (V doped-NixFey) Metal–Organic framework MOF@Graphene oxide composite

An ongoing challenge still lies in the exploration of proficient electrocatalysts from earth-abundant non-precious metals instead of noble metal-based catalysts for clean hydrogen energy through large-Scale electrochemical water splitting. However, developing a non-precious transition metals based, stable electrocatalyst for cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER) is important challenge for modern energy conversion technology. In this report Vanadium doped bimetallic nickel-iron nanoarray, fabricated by carbon supported architecture through carbonization process for electrochemical water splitting. Three types of catalysts were prepared in different molar ratio of Ni/Fe. The electrocatalytic performance demonstrated that the catalyst with equal mole ratio (0.06:0.06) of Ni/Fe possess high catalytic activity for both OER and HER in alkaline and acidic medium. Besides, our findings revealed that the doping of vanadium could play a strong synergetic effect with Ni/Fe, which provide a small overpotential of 90 mV and 210 mV at 10 mA cm^?2 for HER and OER respectively compared to the other two catalyst counterparts. Also, the catalyst with 1:1 (Ni/Fe) molar ratio showed a high current density of 208 mA cm^?2 for HER at 0.5 M H₂SO₄ and 579 mA cm^?2 for OER at 1 M KOH solution, the both current densities are much higher than the other two catalysts (different Ni/Fe ratio). In addition, the presented catalysts showed extremely good durability, reflecting in more than 20 h of consistent Chronoamprometry study at fixed overpotential η = 250 mV without any visible voltage elevation. Similarly, the (Ni/Fe) equal ratio catalyst showed better corrosion potential 0.209 V vs Ag/AgCl and lower current density 0.594 × 10^?12 A cm^?2 in high alkaline medium. The V-doping, MOF/GO surface defects are significantly increased the corrosion potential of the V-Ni_xFe_y-MOF/GO electrocatalyst. Besides, the water electrolyzed products were analysed by gas chromatography to get clear insights on the formed H₂ and O₂ products.