Platelet adhesion on laser‐induced acrylic acid–grafted polyethylene terephthalate

To improve blood compatibility, acrylic acid (AAc) was grafted onto a polyethylene terephtalate (PET) film surface using lasers. The PET surface was irradiated with a CO₂ pulsed laser, and then graft copolymerization was carried out in an aqueous solution of AAc in the presence of Mohr's salt. Different techniques such as attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), scanning electron microscopy (SEM), and contact angle measurements were used to characterize the modified PET surface. The ATR‐FTIR spectra confirmed the creation of new functional groups on the PET surface, and contact angle measurements revealed that the hydrophilicity of the PET surface increased as a result of the AAc graft polymerization. The electron micrographs showed that the grafting changed the surface morphology of the PET film. To evaluate the blood compatibility in vitro, the number of platelets adhering to the modified PET surface was determined using lactate dehydrogenase (LDH) activity measurement. The data from LDH method indicated that the extent of platelet adherence on the unmodified PET was much higher than that on the AAc grafted PET. The morphology of adhered platelets on the PET surface was investigated by SEM. The results showed that platelet adhesion and activation onto the PET surface was reduced because of AAc graft polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3191–3196, 2002     

Grafting of polyacrylamide from poly(ethylene terephthalate) films

Poly(ethylene terephthalate) (PET) films were modified via the grafting of polyacrylamide (PAAM) onto the surface by surface‐initiated atom transfer radical polymerization and UV‐initiated grafting. The surface composition and morphology of the modified PET films were characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and scanning electron microscopy (SEM). The results show that the surface of the PET film was grafted by PAAM, with its own surface morphology different from that of PET. The properties of the modified PET films were studied by contact‐angle, peeling force, penetrability, haze, and friction factor measurements. The results indicate that the peeling force and friction factor of the modified PET films were higher than those of the unmodified PET film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Poly(vinylidene fluoride) (PVDF) membrane was pre-irradiated by electron beam, and then poly(ethylene glycol) methyl ether methacrylate (PEGMA) was grafted onto the membrane surface in the aqueous solution. The degree of grafting was significantly influenced by the pH value of the reaction solution. The surface chemical changes were characterized by the Fourier transform infrared attenuated total reflection spectroscopy (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Combining with the analysis of the nuclear magnetic resonance proton and carbon spectra (¹H NMR and ¹³C NMR), PEGMA was mainly grafted onto the membrane surface. Morphological changes were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The porosity and bulk mean pore size changes were determined by a mercury porosimeter. The surface and bulk hydrophilicity were evaluated on the basis of static water contact angle, dynamic water contact angle and the dynamic adsorption process. Furthermore, relative high permeation fluxes of pure water and protein solution were obtained. All these results demonstrate that both hydrophilicity and fouling resistance of the PVDF membrane can be improved by the immobilization of hydrophilic comb-like polymer brushes on the membrane surface.     

等离子体诱导下丙烯酸在PET表面的接枝聚合

利用等离子体对聚对苯二甲酸乙二酯（PET）薄膜进行表面处理,并诱导引发丙烯酸（AAc）在其表面接枝聚合,制备了具有结合牢固、高亲水性的聚丙烯酸（PAAc-g-PET）复合膜。通过表面衰减全反射-傅里叶红外光谱（ATR-FTIR）结构表征,证明了PAAc成功接枝到PET薄膜上。通过对AAc在PET薄膜表面接枝率的动力学影响因素的系统分析,获得了高接枝率下的PAAc-g-PET复合膜的最佳实现条件。     

Comparison of two approaches to grafting hydrophilic polymer chains onto polysulfone films

To reduce the surface protein adsorption of polysulfone (PSf) film, we improved the hydrophilicity of this film by photochemical grafting of methoxypoly (ethylene glycol) (MPEG) derivatives on its surface. Grafting was achieved with both the simultaneous method and the sequential method. Surface analysis of the grafted film by X‐ray photoelectron spectroscopy (XPS) revealed that the PEG chains had successfully grafted onto the surface of the film. The grafting efficiencies by simultaneous and sequential methods were 20.8% and 10.2%, respectively. With an atomic force microscope (AFM), the surface topography of PEG‐grafted films by these two methods was compared. Static water contact angle measurement indicated that the surface hydrophilicity of the film had been improved. Protein adsorption measurement showed that the surface protein adsorption of the modified film was significantly reduced compared with that of the unmodified PSf film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3818–3826, 2007     

Functionalization of industrial polypropylene films via the swift‐heavy‐ion‐induced grafting of glycidyl methacrylate

Swift‐silver‐ion irradiation was explored as a means of forming chemically active sites on the surface of biaxially oriented polypropylene films. The active species, formed in air, was used to induce the graft copolymerization of glycidyl methacrylate in an aqueous solution. The surface structure, crystallinity, morphology, and hydrophilicity of the grafted samples were characterized with Fourier transform infrared, UV, wide‐angle X‐ray diffraction, scanning electron microscopy, and contact‐angle measurements. Glycidyl methacrylate could be grafted onto biaxially oriented polypropylene after swift‐heavy‐ion irradiation without an additional initiator. The contact angle of the modified films decreased with the grafting percentage of glycidyl methacrylate on the polypropylene. The swift silver ions induced significant grafting only in small regions (i.e., the latent tracks) of the polymer. Furthermore, as the fluence of swift heavy ions increased beyond an optimum value, the overlapping of the latent tracks reduced the grafting yield. The observed findings could be very useful in developing an initiator‐free grafting system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

A facile approach to UV-curable super-hydrophilic polyacrylate coating film grafted on glass substrate

The super-hydrophilic polymer coating film can easily be be peeled off from a substrate with the existence of water, which is a fatal drawback in practical applications. Herein, a facile approach is proposed to prepare UV-curable super-hydrophilic polyacrylate coating film that is chemically grafted on the surface of γ-methacryloxypropyltrimethoxysilane-modified glass substrate. Fourier transform infrared spectroscopy and scanning electron microscopy confirmed that the polyacrylate coating films were successfully grafted onto the glass substrate and exhibited rough micro-groove structure. The obtained polyacrylate coating film possessed super-hydrophilicity with the water contact angle close to nearly zero as well as good transmittance and antifogging property.     

低温等离子体处理及丙烯酸接枝改性膨化聚四氟乙烯薄膜

采用He等离子体对膨化聚四氟乙烯(ePTFE)薄膜进行表面亲水处理,并引发接枝丙烯酸单体实现持久亲水改性.实验探究了不同等离子处理工艺和接枝工艺对ePTFE薄膜亲水性能的影响,并利用接触角、X光电子能谱(XPS)进行表征.研究结果表明,等离子体预处理后,ePTFE薄膜表面的接触角由145°降至102°;再接枝丙烯酸单体...     

Preparation and characterization of grafting polyacrylamide from PET films by SI‐ATRP via water‐borne system

The grafted homopolymer and comb‐shaped copolymer of polyacrylamide were prepared by combining the self‐assembly of initiator and water‐borne surface‐initiated atom transfer radical polymerization (SI‐ATRP). The structures, composition, properties, and surface morphology of the modified PET films were characterized by FTIR/ATR, X‐ray photoelectron spectroscopy (XPS), contact angle measurement, and scanning electronic microscopy (SEM). The results show that the surface of PET films was covered by equable grafting polymer layer after grafted polyacrylamide (PAM). The amount of grafting polymer increased linearly with the polymerization time added. The GPC date show that the polymerization in the water‐borne medium at lower temperature (50°C) shows better “living” and control. After modified by comb‐shaped copolymer brushes, the modified PET film was completely covered with the second polymer layer (PAM) and water contact angle decreased to 13.6°. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Surface structure and adhesive properties of biaxially oriented polypropylene film grafted with poly(acrylic amide) using corona discharge

Corona discharge was explored as a means of forming chemically active sites on the surface of biaxially oriented polypropylene (BOPP) film. The active species formed in air was used to induce graft copolymerization of acrylic amide (AAM) in aqueous solution. The surface structure, hydrophilicity and adhesion of the grafted BOPP film were characterized by the extent of grafting, electron spectroscopy for chemical analysis (ESCA), scanning electron microscopy (SEM), peel strength and contact angle measurements. Surface graft‐copolymerization of AAM onto BOPP film by corona discharge in air can be carried out with high efficiency. With increasing copolymerization time, the degree of grafting of AAM onto BOPP increases. The degree of grafting achieved a relatively high value of 2.13 wt% for the conditions of 1 min corona discharge and a copolymerization reaction time of 2.5 hr in 20% AAM aqueous solution at 70°C. After corona discharge grafting, the contact angle of water on the BOPP film decreased and the peel strength increased compared with those for ungrafted BOPP film. The hydrophilicity and adhesion of BOPP were improved by surface graft copolymerization with AAM induced by corona discharge.     

Preparation and characterization of novel hyperbranched poly(amine‐ester) films crosslinked by glutaraldehyde

Novel films based on hydroxyl terminated hyperbranched poly (amine‐ester) (HPAE‐OH) of different generation were prepared by crosslinking the terminal hydroxyl groups of HPAE with glutaraldehyde (GA). The progress of crosslinking reaction was characterized by Fourier transform infrared (FTIR) and viscosity measurement. The surface morphology of the crosslinked HPAE films was characterized by field emission scanning electron microscope (FE‐SEM) and atomic force microscopy. The results suggested that the films have homogenously dense interior matrices and smooth surface. The hydrophilicity/hydrophobicity of the crosslinked HPAE films was characterized by the water contact angle measurement. Variable swelling behavior in different solvents was also studied. The in vitro biocompatibility of the film was investigated by the bovine hemoglobin (Hb) adsorption measurement. And these results showed that these crosslinked HPAE films had excellent hydrophilicity, variable swelling behavior in different solvents, and relative low protein absorption. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Grafting sulfobetaine monomer onto silicone surface to improve haemocompatibility

Silicone rubber has been used as a biomaterial for more than two decades and displays good mechanical and optical properties, but its chemical nature, poor antithrombogenicity, as well as its hydrophobicity, prevents its use in many demanding biomedical applications. In order to provide modified silicone with enhanced haemocompatibility, surface modification techniques were used. Ozonization was used to introduce active peroxide groups onto the silicone film surface and, subsequently, graft polymerization of N,N′‐dimethyl‐N‐methacryloyloxyethyl‐N‐(3‐sulfopropyl) ammonium (DMMSA), a zwitterionic sulfobetaine structure, onto the ozone activated silicone surface was conducted. Surface analysis was accomplished by means of attenuated total reflectance‐Fourier‐transform infrared (ATR‐FTIR), and X‐ray photoelectron spectra (XPS), and scanning electron microscopy (SEM) and contact angle measurement. ATR‐FTIR and XPS investigation confirmed the graft polymerization. The grafted film possessed a relatively hydrophilic surface as indicated by contact angle measurement. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet‐rich plasma (PRP) and protein adsorption in bovine fibrinogen using silicone film as the reference. No platelet adhesion was observed for the grafted films incubated in PRP for 120 min. The protein adsorption was reduced on the grafted films after incubated in bovine fibrinogen for 120 min. These results confirmed that the improved blood compatibility was obtained by grafting this new zwitterronic sulfobetaine structure onto silicone film. Copyright © 2003 Society of Chemical Industry     

等离子体活化硅橡胶表面紫外接枝N-乙烯基吡咯烷酮

以等离子体活化硅橡胶,然后采用紫外光接枝法将N-乙烯基吡咯烷酮接枝于硅橡胶,同时使其自聚为稳定存在于橡胶表面的聚乙烯基吡咯烷酮。通过测定水接触角、红外光谱、X射线光电子能谱、扫描电镜等方法分析硅橡胶改性前后的表面变化。结果表明,改性后硅橡胶表面携带的新官能团和元素均带有聚乙烯基吡咯烷酮的特征,表明其与硅橡胶基质有较为牢固的化学键相连;硅橡胶表面的水接触角从改性前的110°降至改性后的18°,亲水性能改善明显。     

Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface

Hydrophilic microporous membranes were prepared based on polypropylene (PP) cast films blended with a commercial acrylic acid grafted polypropylene (PP-g-AA) via melt extrusion followed by grafting titanium dioxide (TiO₂) nanoparticles on its surface, annealing and stretching. ATR-FTIR, XPS and EDS analyses showed that the hydrophilic segments of an amphiphilic modifier (PP-g-AA) acted as surface functional groups on the film surface. The results indicated that the presence of the modifier was very important for grafting TiO₂ nanoparticles on the film surface. Compared to PP and PP/PP-g-AA blend films, the water contact angle decreased by a factor of 2.5 after grafting TiO₂ on the surface of the films, meanwhile the water vapor permeability of the microporous membranes prepared from those films increased by a factor of 1.5. All these results indicated that the hydrophilicity of the modified PP membranes was improved.     

Hemocompatibility evaluation of polyurethane film with surface‐grafted poly(ethylene glycol) and carboxymethyl‐chitosan

To improve the hemocompatibility and biocompatibility of polyurethanes (PUs), PU surface was firstly modified by poly(ethylene glycol) PEG through acryloyl chloride and subsequently grafted on carboxymethyl‐chitosan (CMCS). Attenuated total reflection Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy analysis confirmed that carboxyl‐chitosan was grafted onto PUs surface. The surface properties of unmodified and modified PU films were determined and compared by water contact angle assessment. After PEG and CMCS grafting, the surface energy of the PU film was increased. Furthermore, the hemocompatibility of the modified PU films was systematically evaluated by bovine serum albumin (BSA) adsorption, the dynamic blood clotting test, the platelet adhesion test, and the hemolytic test. It appears that BSA adsorption and platelet adhesion were significantly curtailed for the modified PU films. Therefore, the obtained results showed the modified PU film has better hemocompatibility. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A photochemical method for immobilization of azidated dextran onto aminated poly(ethylene terephthalate) surfaces

BACKGROUND: Dextran, a bacterial polysaccharide, has been reported to be as good as poly(ethylene glycol) in its protein‐rejecting and cell‐repelling abilities. In addition, the multivalent nature of dextran is advantageous for surface grafting of biologically active molecules. We report here a method to photochemically bind dextran hydrogel films to aminated poly(ethylene terephthalate) (PET) surfaces in aqueous media using a heterobifunctional crosslinker, 4‐azidobenzoic acid. In order to achieve this, dextran was first functionalized with the crosslinker using carbodiimide chemistry followed by photo‐crosslinking and immobilization onto the nucleophile‐rich aminated PET surfaces. RESULTS: The presence of the immobilized dextran on PET was verified by attenuated total‐reflection Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, scanning electron microscopy and contact angle measurements. The grafted surface was highly hydrophilic due to the heavily hydrated polysaccharide network on the surface as demonstrated by the near zero water contact angle. CONCLUSION: A photochemical method for surface immobilization of dextran onto aminated PET using aryl azide chemistry is a facile technique to generate highly hydrophilic and more hemocompatible surfaces. The aryl nitrenes generated by photolysis produce a metastable, electron‐deficient intermediate, azacycloheptatetraene, which is believed to be responsible for the simultaneous crosslinking of dextran and its immobilization onto the aminated PET surface. The aryl azide chemistry reported here for dextran could be useful as a versatile technique for surface modification of other nucleophile‐rich polymers to create dextran‐ or similar polysaccharide‐immobilized surfaces. Copyright © 2007 Society of Chemical Industry     

Grafting modification of electrospun polystyrene fibrous membranes via an entrapped initiator in an acrylic acid aqueous solution

Ultrafine electrospun polymer fibers, with their large specific surface areas, have not found wide applications partly because the fiber surfaces usually carry an insufficient quantity of active groups. The electrospinning and surface‐grafting copolymerization of polystyrene fibrous membranes were carried out via the embedded radical initiator approach. The results from X‐ray photoelectron spectroscopy show that the initiator added to the polystyrene dope was deliberately expelled onto the fiber surfaces. The microstructure and hydrophilicity of the grafted membranes were investigated with Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle and water uptake capacity measurements. An increase in the initiator dosages led to decreases in the grafting rate, water uptake, and hydrophilicity of the grafted membranes; the opposite was true for increases in the neutralization of acrylic acid (AA). However, the grafting, water uptake, and hydrophilicity of the grafted membranes presented nonlinear relationships with the concentration of AA. The initiator emigration technique will provide a facile and feasible platform for the surface‐grafting modification of electrospun membranes. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel surface modification of high‐density polyethylene films by using enzymatic catalysis

The surface of high‐density polyethylene (HDPE) films was modified by an enzyme, soybean peroxidase (SBP). The enzymatic surface modification was performed using a peroxidase as catalyst and hydrogen peroxide as oxidizing agent. The chemical composition and morphology of HDPE surfaces were characterized by X‐ray photoelectron spectroscopy, infrared spectroscopy, and scanning electron microscopy. Results showed that after enzymatic treatment, the O/C atomic ratio of HDPE surfaces increased, and new functional groups such as –CO– appeared. Moreover, the surface of treated HDPE films became rougher than untreated surfaces. The hydrophilicity of treated and untreated HDPE films was analyzed by UV–vis spectroscopy and contact angle measurements. The decreased contact angle of the HDPE with water and increased adsorption ability of the surface to a water‐soluble dye clearly indicated that enzymatic treatment can significantly increase the hydrophilicity of the surfaces of HDPE films. The catalytic mechanism of SBP was also discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3673–3678, 2004     

Surface modification of polyurethane by plasma-induced graft polymerization of poly(ethylene glycol) methacrylate

A new approach, plasma-induced graft polymerization of poly(ethylene glycol) methacrylate (PEGMA), was used to introduce PEG graft chains with hydroxyl end groups onto a polyurethane (Tecoflex) surface. After argon plasma treatment and subsequent exposure to air, graft polymerization onto Tecoflex films was allowed to proceed in deaerated aqueous solutions of PEGMA at 60°C. The virgin, plasma-treated, and grafted films were characterized comparatively by means of attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, measurement of contact angle, and protein adsorption. The Tecoflex film undergoes etching during argon plasma treatment, surface oxidation when exposed to air after plasma treatment, and surface restructuring in response to environment upon storage in air. The plasma-induced graft polymerization of PEGMA proved to be successful in introducing PEG graft chains with reactive hydroxyl end groups onto the surface. Grafted films with different surface grafting density of PEG were prepared. Grafted films with higher PEG content exhibit higher hydrophilicity, smoother topography, and lower fibrinogen adsorption. The hydroxyl end groups built onto the surface offer further possibilities of improving its biocompatibility by immobilizing bioactive molecules. © 1996 John Wiley & Sons, Inc.     

Photo‐induced grafting of poly(ethylene glycol) onto polyamide thin film composite membranes

In this study, the surface grafting of poly(ethylene glycol) (PEG) onto commercial polyamide thin film composite (TFC‐PA) membranes was carried out, using ultraviolet photo‐induced graft polymerization method. The attenuated total reflection Fourier transform infrared spectra verify a successful grafting of PEG onto the TFC‐PA membrane surface. The scanning electron microscope and atomic force microscope analyses demonstrate the changes of the membrane surface morphology due to the formation of the PEG‐grafted layer on the top. The contact angle measurements illustrate the increased hydrophilicity of the TFC‐PA‐g‐PEG membrane surfaces, with a significantly reduced water contact angles compared to the unmodified one. Consequently, the separation performance of the PEG‐grafted membranes is highly improved, with a significant enhancement of flux at a great retention for removal of the different objects in aqueous feed solutions. In addition, the antifouling property of the modified membranes is also clearly improved, with the higher maintained flux ratios and the lower irreversible fouling factors compared to the unmodified membrane. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45454.