Unsaturated polyester as compatibilizer for styrene–butadiene (SBR)/acrylonitrile–butadiene (NBR) rubber blends

The effect of the addition of 5 and 10 phr of unsaturated polyester resin (UPE) on the compatibility and physicomechanical properties of styrene–butadiene (SBR) and acrylonitrile–butadiene (NBR) rubber blends was studied. Differential scanning calorimetry (DSC), scanning electron microscopy (SEM), electrical, and ultrasonic techniques were used to determine the degree of the compatibility (DC). The results obtained revealed that, by the addition of 10 parts per hundred parts of rubber (phr) UPE as a compatibilizer for SBR/NBR blends, the degree of compatibility was greatly enhanced. The rheological and mechanical properties of the blends were also improved. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2314–2321, 2002     

Improvement of properties of silica‐filled styrene–butadiene rubber compounds using acrylonitrile–butadiene rubber

Since silica has strong filler–filler interactions and adsorbs polar materials, a silica‐filled rubber compound has a poor dispersion of the filler and poor cure characteristics. Improvement of the properties of silica‐filled styrene–butadiene rubber (SBR) compounds was studied using acrylonitrile–butadiene rubber (NBR). Viscosities and bound rubber contents of the compounds became lower by adding NBR to the compound. Cure characteristics of the compounds were improved by adding NBR. Physical properties such as modulus, tensile strength, heat buildup, abrasion, and crack resistance were also improved by adding NBR. Both wet traction and rolling resistance of the vulcanizates containing NBR were better than were those of the vulcanizate without NBR. The NBR effects in the silica‐filled SBR compounds were compared with the carbon black‐filled compounds. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1127–1133, 2001     

Analysis of network structure formed in styrene–butadiene rubber cured with sulfur/TBBS system

Several styrene–butadiene rubber (SBR) compounds were prepared with different cure systems based on sulfur and TBBS (N‐t‐butyl‐2‐benzothiazole sulfenamide), varying the amount of sulfur and accelerator between 0.5 and 2.5 phr in the formulation. Torque curves, measured with a moving die rheometer at temperatures at 433 K, were used to characterize the vulcanization. The time to achieve the maximum torque, t_100%, was evaluated for each sample, and this time was set to vulcanize sheets at 433 K. The density and type of elastically active crosslinks of each cured sample were evaluated by means of swelling measurements and were related to the vulcanizing system. Finally, the rheometer data were analyzed considering the network structure formed during vulcanization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1105–1112, 2007     

Dichlorocarbene modification of styrene–butadiene rubber

Dichlorocarbene-modified styrene–butadiene rubber (SBR) prepared by the alkaline hydrolysis of chloroform using cetyltrimethylammonium bromide as a phase-transfer agent resulted in a product that showed good mechanical properties, excellent flame resistance, solvent resistance, and good thermal stability. The activation energy for this chemical reaction calculated from the time–temperature data on the chemical reaction by the measurement of the percentage of chlorine indicated that the reaction proceeded according to first-order kinetics. The molecular weight of the polymers, determined by gel permeation chromatography, showed that chemical modification was accompanied by an increase in molecular weight. The chemical modification was characterized by proton NMR, FTIR studies, thermogravimetric analysis, and flammability measurement. Proton NMR and FTIR studies revealed the attachment of chlorine through cyclopropyl rings to the double bond of butadiene. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 153–160, 1998     

Oil absorbents based on styrene–butadiene rubber

Four oil absorbents based on styrene–butadiene (SBR)—pure SBR (PS), 4‐tert‐butylstyrene–SBR (PBS), EPDM–SBR network (PES), and 4‐tert‐butylstyrene‐EPDM‐SBR (PBES)—were produced from crosslinking polymerization of uncured styrene–butadiene rubber (SBR), 4‐tert‐butylstyrene (tBS), and ethylene–propylene–diene terpolymer (EPDM). The reaction took place in toluene using benzoyl peroxide (BPO) as an initiator. Uncured SBR was used as both a prepolymer and a crosslink agent in this work, and the crosslinked polymer was identified by IR spectroscopy. The oil absorbency of the crosslinked polymer was evaluated with ASTM method F726‐81. The order of maximum oil absorbency was PBES > PBS > PES > PS. The maximum values of oil absorbency of PBES and PBS were 74.0 and 69.5 g/g, respectively. Gel fractions and swelling kinetic constants, however, had opposite sequences. The swelling kinetic constant of PS evaluated by an experimental equation was 49.97 × 10^?2 h^?1. The gel strength parameter, S, the relaxation exponent, n, and the fractal dimension, d_f, of the crosslinked polymer at the pseudo‐critical gel state were determined from oscillatory shear measurements by a dynamic rheometer. The morphologies and light resistance properties of the crosslinked polymers were observed, respectively, with a scanning electron microscope (SEM) and a color difference meter.     

Ultraviolet-initiated photografting of glycidyl methacrylate onto styrene–butadiene rubber

Photografting reaction onto styrene–butadiene rubber (SBR) as a function of monomer concentration, grafting method, irradiation time, and the carbon black content has been studied using ultraviolet (UV). Glycidyl methacrylate and benzophenone are used as monomer and initiator, respectively. The occurrence of graft reaction onto SBR surface is identified by infrared attenuated total reflection (IR-ATR) analysis. The degree of monomer graft increases with monomer concentration and tends to level off at high monomer concentration (>8.3M/L). Graft ratio also increases with UV irradiation time. Carbon black content is found as one of important factors that determine the monomer graft efficiency. The amount of monomer graft onto SBR decreases with increasing carbon black content and it is attributed to the reduction of irradiation absorbance due to the presence of carbon black. The occurrence of reaction between glycidyl methacrylate grafted SBR and nylon-6 via melt phase reaction is also identified using IR-ATR analysis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1733–1739, 1999     

Pyrolytic treatment of rubber waste: Pyrolysis kinetics of styrene—butadiene rubber

The pyrolysis kinetics of commercial-grade styrene–butadiene rubber (SBR), which is one of the major constituents of tyre rubber as well as one of the principal products of the rubber industry in Taiwan, was investigated by a dynamic thermogravimetry (TG) reaction system in a nitrogen atmosphere over the temperature range of 400 to 950 K at the nominal heating rates of 3, 5 and 7 K min⁻¹. The experimental results indicated that the pyrolysis of SBR may be attributed to three reactions, with three distinct mass change characteristics in the mass-loss curves of reactant deduced from the experiments. The corresponding activation energies, frequency factors and reaction orders of the three reactions were determined. A simplified three-reaction model based on the mass-loss curves of reactant was also proposed for engineering purposes. Satisfactory agreements between the proposed model and the experimental results were obtained. The results of this study are useful for the utilization of scrap SBR as an energy resource.     

Sulfur‐free lignin as reinforcing component of styrene–butadiene rubber

The potential application of lignin biopolymer as a component of styrene–butadiene rubber was examined with regard to its ability to reinforce the vulcanizates. It was shown that the sulfur‐free lignin preparation improved physicomechanical properties of rubber. The determination of the coefficient of lignin activity confirmed that lignin acts as an active filler. FTIR characteristics of lignin isolated from the vulcanizate containing 20 phr lignin indicated its interaction with the sulfur system, resulting in formation of noncyclic sulfide structures. In the case of higher lignin amount in the vulcanizate, some interfacial interaction between lignin and SBR may occur. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 924–929, 2005     

Styrene–butadiene rubber/natural rubber blends: Morphology,transport behavior,and dynamic mechanical and mechanical properties

Blends of styrene–butadiene rubber (SBR) and natural rubber (NR) were prepared and their morphology, transport behavior, and dynamic mechanical and mechanical properties were studied. The transport behavior of SBR/NR blends was examined in an atmosphere of n‐alkanes in the temperature range of 25–60°C. Transport parameters such as diffusivity, sorptivity, and permeability were estimated. Network characterization was done using phantom and affine models. The effect of the blend ratio on the dynamic mechanical properties of SBR/NR blends was investigated at different temperatures. The storage modulus of the blend decreased with increase of the temperature. Attempts were made to correlate the properties with the morphology of the blend. To understand the stability of the membranes, mechanical testing was carried out for unswollen, swollen, and deswollen samples. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1280–1303, 2000     

Effects of different interphases on the mechanical properties of cured silanized silica‐filled styrene–butadiene/polybutadiene rubber blends for use in passenger car tire treads

Polybutadiene (BR) and styrene–butadiene (SBR) rubbers containing the same loading of precipitated silica nanofiller were prepared. The silica surfaces were pretreated with bis(3‐triethoxysilylpropyl) tetrasulfide to chemically bond the silica to the rubber. The rubber compounds were mixed together for different times and at different temperatures to produce SBR/BR blends. The mass fraction and composition values of the interphases in the blends were subsequently determined with modulated‐temperature differential scanning calorimetry. These properties changed substantially as a function of mixing temperature and mixing time. The hardness, tensile strength, elongation at break, stored energy density at break, tear strength, modulus, abrasion resistance, heat buildup, and loss tangent of the cured blends were measured over a wide range of test conditions. Elongation at break, stored energy density at break, tearing energy, and abrasion resistance benefited from increases in the mass fraction of the interphase. The remaining properties were influenced mainly by the filler loading and mixing time of the two rubber compounds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Factorial experimental design for graft copolymerization of styrene and methyl methacrylate onto styrene–butadiene rubber

The graft copolymerization of styrene (ST) and methyl methacrylate (MMA) onto styrene–butadiene rubber (SBR) latex prepared by seeded emulsion polymerization has been studied under various reaction conditions using cumene hydroperoxide redox initiator. The mechanism of graft copolymerization has been investigated. The synthesized graft copolymers were purified and then characterized by proton nuclear magnetic resonance (¹H NMR) analysis. A 2 2 fractional factorial experimental design was applied to study the effects of the process variables such as the amount of initiator and emulsifier, the presence or absence of chain‐transfer agent, ST to MMA ratio, monomer to rubber ratio, and reaction temperature on the grafting efficiency. The analysis of the results from the design showed the sequence of the main effect on the observed response of the grafting of ST and MMA onto SBR and that the amount of chain‐transfer agent had a significant effect. Transmission electron microscopy was used to study the morphology of the graft copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2867–2874, 2006     

Preparation and characterization of acrylonitrile–styrene–methylmethacrylate terpolymer as a compatibilizer for rubber blends

Acrylonitrile‐co‐styrene‐co‐methylmethacrylate (AN‐S‐MMA) terpolymer was prepared by bulk and emulsifier‐free emulsion polymerization techniques. The bulk and emulsion terpolymers were characterized by means of Fourierr transform infrared spectroscopy, ¹³C nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography, thermal gravimetric analysis, and elemental analysis. The kinetics of the terpolymerization were studied. The terpolymers were then incorporated into butadiene—acrylonitrile rubber (NBR)/ethylene propylene diene monomer rubber (EPDM) blends and into chloroprene rubber (CR)/EPDM blend. The terpolymers were then tested for potential as compatibilizers by using scanning electron microscopy and differential scanning calorimetry. The terpolymers improved the compatibility of CR/EPDM and NBR/EPDM blends. The physicomechanical properties of CR/EPDM and NBR/EPDM blend vulcanizates revealed that the incorporation of terpolymers was advantageous, since they resulted in blend vulcanizates with higher 100% moduli and with more thermally stable mechanical properties than the individual rubbers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3143–3153, 2003     

Structural morphology and properties of star styrene–isoprene–butadiene rubber and natural rubber/star styrene–butadiene rubber blends

Star styrene–isoprene–butadiene rubber (SIBR) was synthesized with a new kind of star anionic initiator made from naphthalene lithium and an SnCl₄ coupled agent. The relationship between the structure and properties of star SIBR was studied. Star block styrene–isoprene–butadiene rubber (SB‐SIBR), having low hysteresis, high road‐hugging, and excellent mechanical properties, was closer to meeting the overall performance requirements of ideal tire‐tread rubber according to a comparison of the morphology and various properties of SB‐SIBR with those of star random SIBR and natural rubber/star styrene–butadiene rubber blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 336–341, 2004     

The effect of the architecture and concentration of styrene–butadiene compatibilizers on the morphology of polystyrene/low‐density polyethylene blends

The effect of styrene–butadiene block copolymers (SB) with varying number of blocks and length of styrene blocks on the morphology, rheology, and impact strength of 4/1 polystyrene/low‐density polyethylene (PS/LDPE) blends was studied. The scanning and transmission electron microscopy and X‐ray scattering were used for determination of the size of LDPE particles and the localization and structure of SB copolymers in blends. It is shown that the dependence of the LDPE particle size on the amount of added SB and localization of SB copolymers in blends is predominantly controlled by the length of their styrene blocks. It follows from thermodynamic considerations that the reason is the difference in composition asymmetry between SB with short and long styrene blocks. Coalescence of particles of SB having short styrene blocks at the surface of LDPE droplets and movement of SB with long styrene blocks to the PS–LDPE interface were observed during annealing of PS/LDPE/SB blends. Pronounced migration of SB copolymer during annealing shows that their localizations in blends in steady state on long steady mixing and at thermodynamic equilibrium are different. The values of tensile impact strength of PS/LDPE/SB blends correlate well with the size of LDPE particles and the amount of SB at the interface. Viscosity of PS/LDPE/SB depends on molecular structure of SB copolymers by a manner different from that of tensile impact strength. The results of this study and literature data lead to the conclusion that the compatibilization efficiency of SB copolymers for a certain polystyrene‐polyolefin pair is a function of not only molecular parameters of SB but also of the polystyrene/polyolefin ratio, the amount of SB in a blend, and mixing and processing conditions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2803–2816, 2006     

Influence of styrene content on the hydrogenation of styrene–butadiene copolymer

A hydrogenated styrene–butadiene copolymer (HSBR) was prepared by a diimide reduction of SBR in the latex stage. The influence of the styrene content on various reaction parameters, namely, time, temperature, and concentration of the reactants and the catalyst was studied. A comparatively lower temperature, longer time, lesser amount of hydrogen peroxide, and higher amount of the catalyst are required to optimize the hydrogenation reactions of SBR with a higher styrene content. The diimide reduction of SBR is first order with respect to the olefinic substrate and the apparent activation energy increases with increase in the styrene level. All the hydrogenated copolymers were characterized with the help of IR, NMR, and DSC. The TGA data indicate a higher thermal stability of HSBR as compared to SBR in nitrogen, although an anomalous behavior is observed in air due to crosslinking and oxidation. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1581–1595, 1999     

Morphology and mechanical properties of clay/styrene‐butadiene rubber nanocomposites

Based on the character of a clay that could be separated into many 1‐nm thickness monolayers, clay styrene‐butadiene rubber (SBR) nanocomposites were acquired by mixing the SBR latex with a clay/water dispersion and coagulating the mixture. The structure of the dispersion of clay in the SBR was studied through TEM. The mechanical properties of clay/SBR nanocomposites with different filling amounts of clay were studied. The results showed that the main structure of the dispersion of clay in the SBR was a layer bundle whose thickness was 4–10 nm and its aggregation formed by several or many layer bundles. Compared with the other filler, some mechanical properties of clay/SBR nanocomposites exceeded those of carbon black/SBR composites and they were higher than those of clay/SBR composites produced by directly mixing clay with SBR through regular rubber processing means. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1873–1878, 2000     

Overall properties of fibrillar silicate/styrene–butadiene rubber nanocomposites

The mechanical properties, heat aging resistance, dynamic properties, and abrasion resistance of fibrillar silicate (FS)/styrene butadiene rubber (SBR) nanocomposites are discussed in detail. Compared with white carbon black (WCB)/SBR composites, FS/SBR composites exhibit higher tensile stress at definite strain, higher tear strength, and lower elongation at break but poor abrasion resistance and tensile strength. Surprisingly, FS/SBR compounds have better flow properties. This is because by rubber melt blending modified FS can be separated into numerous nanosized fibrils under mechanical shear. Moreover, the composites show visible anisotropy due to the orientation of nanofibrils. There is potential for FS to be used to some extent as a reinforcing agent for rubber instead of short microfibers or white carbon black. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2725–2731, 2006     

Decabromobiphenyl oxide–aluminum hydroxide system as a flame retardant for styrene–butadiene rubber

Styrene–butadiene rubber (SBR) was treated with decabromobiphenyl oxide (DBBO) and/or aluminum hydroxide [Al(OH)₃] as a flame retardant. The flammability of the resulting system was determined by the limiting oxygen index method. The effect of the added flame retardants on the maximum torque (MH), curing rate, and tensile properties was also evaluated. The results showed, particularly, that DBBO was a more effective flame retardant than was Al(OH)₃. On the other hand, this brominated compound reduced the modulus of elasticity while its effect on the maximum torque was insignificant. Moreover, the addition of DBBO was found to decrease the curing rate of SBR. In contrast, Al(OH)₃ significantly increased the maximum torque and also markedly reduced the modulus of elasticity. Moreover, the effect of the treatment with Al(OH)₃ on the curing rate was found to be insignificant. The flammability measurement of the SBR treated with different mixtures of the two flame retardants indicated that the two compounds reacted slightly antagonistically. The addition of Al(OH)₃ to DBBO in a mixture that was applied to SBR remedied some negative impacts on the mechanical properties when DBBO was added separately to the rubber. The value of the maximum torque of SBR increased and the curing rate slightly increased as well. Meanwhile, the values of the modulus of elasticity were not affected. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2134–2139, 2000     

Influences of trans‐polyoctylene rubber on the physical properties and phase morphology of natural rubber/acrylonitrile–butadiene rubber blends

The influence of trans‐polyoctylene rubber (TOR) on the mechanical properties, glass‐transition behavior, and phase morphology of natural rubber (NR)/acrylonitrile–butadiene rubber (NBR) blends was investigated. With an increased TOR level, hardness, tensile modulus, and resilience increased, whereas tensile strength and elongation at break tremendously decreased. According to differential scanning calorimetry and dynamic mechanical analysis, there were two distinct glass‐transition temperatures for a 50/50 NR/NBR blend, indicating the strongly incompatible nature of the blend. When the TOR level was increased, the glass transition of NBR was strongly suppressed. NBR droplets of a few micrometers were uniformly dispersed in the continuous NR phases in the NR/NBR blends. When TOR was added to a 50/50 NR/NBR blend, TOR tended to be located in the NR phase and in some cases was positioned at the interfaces between the NBR and NR phases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 125–134, 2002     

New oligomer‐bound antioxidants in natural rubber/polybutadiene rubber and natural rubber/styrene–butadiene rubber blends

New paraphenylene diamine antioxidants were prepared. The efficiency and permanence of these oligomer‐bound paraphenylene diamines were compared with those of conventional amine‐type antioxidants in elastomer blends such as natural rubber/styrene–butadiene rubber and natural rubber/polybutadiene rubber. These oligomer‐bound antioxidants showed improved aging resistance and ozone resistance in comparison with the blends containing conventional antioxidants. The liquid oligomer‐bound paraphenylene diamine could replace the plasticizer required for compounding. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 437–443, 2004