High Na‐ion conducting Na1+x[SnxGe2−x(PO4)3] glass‐ceramic electrolytes: Structural and electrochemical impedance studies

Na‐ion conducting Na_1+x[Sn_xGe_2?x(PO₄)₃] (x = 0, 0.25, 0.5, and 0.75 mol%) glass samples with NASICON‐type phase were synthesized by the melt quenching method and glass‐ceramics were formed by heat treating the precursor glasses at their crystallization temperatures. XRD traces exhibit formation of most stable crystalline phase NaGe₂(PO₄)₃ (ICSD‐164019) with trigonal structure. Structural illustration of sodium germanium phosphate [NaGe₂(PO₄)₃] displays that each germanium is surrounded by 6 oxygen atom showing octahedral symmetry (GeO₆) and phosphorous with 4 oxygen atoms showing tetrahedral symmetry (PO₄). The highest bulk Na⁺ ion conductivities and lowest activation energy for conduction were achieved to be 8.39 × 10^?05 S/cm and 0.52 eV for the optimum substitution levels (x = 0.5 mol%, Na_1.5[Sn_0.5Ge_1.5(PO₄)₃]) of tetrahedral Ge⁴⁺ ions by Sn⁴⁺ on Na–Ge–P network. CV studies of the best conducting Na_1.5[Sn_0.5Ge_1.5(PO₄)₃] glass‐ceramic electrolyte possesses a wide electrochemical window of 6 V. The structural and EIS studies of these glass‐ceramic electrolyte samples were monitored in light of the substitution of Ge by its larger homologue Sn.     

TPA‐PPEs – New alternating donor copolymers for potential application in photovoltaic devices

A series of phenyleneethynylene copolymers with triphenylamine units as hole‐transporting moieties (TPA‐PPEs) were synthesized by the palladium‐catalyzed cross‐coupling polycondensation of diethynyltriphenylamines and selected dihalogen comonomers, for instance substituted benzene, thiophene, benzothiadiazole, or anthracene. Incorporation of the electron‐rich amino group into the PPE backbone does not interrupt the main chain conjugation. Furthermore, it has a decreasing effect on the oxidation potential, thus makes these polymers interesting as hole‐injection/hole‐transporting materials. The chemical structure of the new alternating copolymers was confirmed by ¹H and ¹³C NMR spectroscopy and elemental analysis and gel‐permeation chromatography (GPC; THF, M_n ≈ 15,000–30,000 g/mol) was conducted. Furthermore, their optical properties were investigated by UV/vis spectroscopy. The TPA‐PPEs exhibit absorption maxima at around 400 nm (π‐π*), except anthracene containing copolymer 3f (λ_max = 514 nm in THF) and benzothiadiazole containing one 3g (λ_max = 503 nm in THF). The TPA copolymers have oxidation potentials about 1.1 V (Ag/AgCl). They are good photoconducting materials ( 3a : I_Photo = 4 × 10^?10 A at 425 nm (400 V), 3g : I_Photo = 1.3 × 10^?11 A at λ_max = 500 nm (20 V)) and show emission after excitation at around 450 nm (560 nm 3f ). Their application in nonoptimized polymer solar cells (bulk heterojunction) led to power conversion efficiencies of around 1–1.8% after illumination with 100 mW/cm² of AM1.5. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Catalytic potential of a poly(AAc‐co‐HPMA‐cl MBAm)‐matrix‐immobilized lipase from a thermotolerant Pseudomonas aeruginosa MTCC‐4713

A purified alkaline thermo‐tolerant lipase from Pseudomonas aeruginosa MTCC‐4713 was immobilized on a series of five noble weakly hydrophilic poly(AAc‐co‐HPMA‐cl MBAm) hydrogels. The hydrogel synthesized by copolymerizing acrylic acid and 2‐hydroxy propyl methacrylate in a ratio of 5 : 1 (HG_5:1 matrix) showed maximum binding efficiency for lipase (95.3%, specific activity 1.96 IU mg^?1 of protein). The HG_5:1 immobilized lipase was evaluated for its hydrolytic potential towards p‐NPP by studying the effect of various physical parameters and salt‐ions. The immobilized lipase was highly stable and retained ～92% of its original hydrolytic activity after fifth cycle of reuse for hydrolysis of p‐nitrophenyl palmitate at pH 7.5 and temperature 55°C. However, when the effect of pH and temperature was studied on free and bound lipase, the HG_5:1 immobilized lipase exhibited a shift in optima for pH and temperature from pH 7.5 and 55°C to 8.5 and 65°C in free and immobilized lipase, respectively. At 1 mM concentration, Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions promoted and Co²⁺ ions inhibited the hydrolytic activities of free as well as immobilized lipase. However, exposure of either free or immobilized lipase to any of these ions at 5 mM concentration strongly increased the hydrolysis of p‐NPP (by ～3–4 times) in comparison to the biocatalysts not exposed to any of the salt ions. The study concluded that HG_5:1 matrix efficiently immobilized lipase of P. aeruginosa MTCC‐4713, improved the stability of the immobilized biocatalyst towards a higher pH and temperature than the free enzyme and interacted with Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions to promote rapid hydrolysis of the substrate (p‐NPP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4252–4259, 2006     

Synthesis,extraction, and anti‐bacterial studies of some new bis‐1,2,4‐triazole derivatives part I

A series of new bis triazole Schiff base derivatives (4) were prepared in good yields by treatment of 4‐amino‐3,5‐diphenyl‐4H‐1,2,4‐triazole (3) with bisaldehydes (1). Schiff bases (4) were reduced with NaBH₄ to afford the corresponding bisaminotriazoles (5). All the new compounds were characterized by IR, ¹H NMR and ¹³C NMR spectral data. Their overall extraction (log K_ex) constants for 1 : 1 (M : L) complexes and CHCl₃/H₂O systems were determined at 25 ± 0.1°C to investigate the relationship between structure and selectivity toward various metal cations. The extraction equilibrium constants were estimated using CHCl₃/H₂O membrane transfer with inductively coupled plasma‐atomic emission spectroscopy spectroscopy. The stability sequence of the triazole derivatives in CHCl₃ for the metal cations was exhibited a characteristic preference order of extractability to metal ions [Fe(III) > Cu(II) > Pb(II) > Co(II) > Ni(II) > Mn(II) > Zn(II) > Mg(II) > Ca(II)]. The compounds were tested for anti‐microbial activity applying agar diffusion technique for 11 bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Effects of electrolytes on the reduction of 2,4‐dinitrotoluene by zero‐valent iron

BACKGROUND: Dinitrotoluenes (DNTs) are environmentally persistent, making the remediation of contaminated streams and groundwater difficult. Zero‐valent iron (Fe⁰) can be used as an electron source for the reduction of recalcitrant DNTs in waste‐water and thus enhance their biodegradability. However, little is known about the qualitative effects of major anions and cations present in waste‐water on the reduction of DNTs by Fe⁰. RESULTS: The presence of Na₂SO₄ and NaCl at levels between 0.25 and 2 mmol L^?1 was observed to enhance the reactivity of Fe⁰ towards 2,4‐DNT. The positive effect of K₂SO₄ is stronger than that of Na₂SO₄ at the same level (1 mmol L^?1). Varying (NH₄)₂SO₄ from 0.1 to 1.0 mmol L^?1 improved the efficiency of 2,4‐DNT degradation by Fe⁰. The effects of varying NaNO₃ and NaNO₂ from 0 mmol L^?1 to 4.7 mmol L^?1 and 0 mmol L^?1 to 5.8 mmol L^?1, respectively, were also investigated. Both NaNO₃ and NaNO₂ at low concentration improved the efficiency of 2,4‐DNT degradation by Fe⁰, however, at high concentration, inhibiting effects appeared. CONCLUSION: SO₄^2?, Cl^?, Na⁺, K⁺ and NH₄⁺ notably enhanced 2,4‐DNT reduction by Fe⁰ at the tested concentrations. The positive effect of K⁺, Cl^? was relatively stronger than that of Na⁺ and sulfate (SO₄^2?). However, the effect of NH₄⁺ was relatively weaker at concentrations greater than 1.0 mmol L^?1. The presence of low concentrations of NO₃^? and NO₂^? promoted 2,4‐DNT reduction by Fe⁰ and inhibited the reaction. The results suggest that 2,4‐DNT reduction by Fe⁰ can be controlled by the ions composition of the waste‐water. Copyright © 2010 Society of Chemical Industry     

How the Influence of Different Salts on Interfacial Properties of Surfactant–Oil–Water Systems at Optimum Formulation Matches the Hofmeister Series Ranking

In this work, we present the effects of salts on sodium dodecyl benzene sulfonate micellization and on the interfacial performance of a sodium dodecyl benzene sulfonate–heptane–brine system at optimum formulation, i.e., hydrophilic–lipophilic deviation (HLD) = 0. In order to do that, interfacial tension and dilational interfacial rheology properties of surfactant–heptane–water systems at optimum formulation are measured using an interfacial spinning drop tensiometer with an oscillating velocity, which can accurately measure interfacial rheology properties at both low and ultralow interfacial tensions. The brines used contain one of the following salts: MgCl₂, CaCl₂, NaCl, NH₄Cl, NaNO₃, CH₃COONa, or Na₂SO₄. We performed a one-dimensional salinity scan with each of these salts to achieve an optimum formulation. In relation to the Hofmeister series, we found that, at optimum formulation, systems with chaotropic ions (NH₄⁺, NO₃⁻) present interfaces with ultralow interfacial tensions, very low dilational modulus, and a low phase angle, whereas kosmotropic ions (Mg²⁺, Ca²⁺, SO₄⁻²) generate high interfacial tension and high rigidity monolayers. Intermediate ions in the Hofmeister series (Na⁺, CH₃COO⁻, Cl⁻) present interfaces with intermediate properties. Furthermore, according to the Hofmeister series, interfaces can be respectively ordered from higher to lower rigidity for surfactant counterions Mg²⁺ > Ca²⁺ > Na⁺ > NH₄⁺ and coions SO₄²⁻ > CH₃COO^– > Cl⁻ > NO₃⁻, which correspond to a salting-out (highest rigidity) and salting-in (lowest rigidity) effect. We observed that counterions have a more significant effect on surfactant–oil–water system properties than those that act as coions.     

Characteristics of poly(AAc5‐co‐HPMA3‐cl‐EGDMA15) hydrogel‐immobilized lipase of Pseudomonas aeruginosa MTCC‐4713

Four series of noble networks were synthesized with acrylic acid (AAc) copolymerized with varying amount of 2‐hydroxy propyl methacrylate or dodecyl methacrylate (AAc/HPMA or AAc/DMA; 5:1 to 5:5, w/w) in the presence of ethylene glycol dimethacrylate (EGDMA; 1, 5, 10, 15, and 20%, w/w) as a crosslinker and ammonium per sulfate (APS) as an initiator. Each of the networks was used to immobilize a purified lipase from Pseudomonas aeruginosa MTCC‐4713. The lipase was purified by successive salting out with (NH₄)₂SO₄, dialysis, and DEAE anion exchange chromatography. Two of the matrices, E_15a, i.e. [poly (AAc₅‐co‐DMA₁‐cl‐EGDMA₁₅)] and I_15c, i.e. [poly (AAc₅‐co‐HPMA₃‐cl‐EGDMA₁₅)], that showed relatively higher binding efficiency for lipase were selected for further studies. I_15c‐hydrogel retained 58.3% of its initial activity after 10th cycle of repetitive hydrolysis of p‐NPP, and I_15c was thus catalytically more stable and efficient than the other matrix. The I_15c‐hydrogel‐immobilized enzyme showed maximum activity at 65°C and pH 9.5. The hydrolytic activity of free and I_15c‐hydrogel‐immobilized enzyme increased profoundly in the presence of 5 mM chloride salts of Hg²⁺, NH₄⁺, Al³⁺, K⁺, and Fe³⁺. The immobilized lipase was preferentially active on medium chain length p‐nitrophenyl acyl ester (C:8, p‐nitrophenyl caprylate). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4636–4644, 2006     

Poly[poly(oxypropylene) phosphate] macroionophores for transport and separation of cations in a hybrid: Cation‐exchange polymer and liquid membrane system

Poly[poly(oxypropylene) phosphate]s (PPOPP, M_n = 5800, 8100, 10,400), with different POP units (400, 1200, 2000), were synthesized and applied as cation‐selective macroionophores in a multimembrane hybrid system (MHS). The solution of PPOPP in dichloroethane formed the flowing liquid membrane (FLM) circulating between two polymer cation‐exchange membranes, and subsequently, between two polymer‐made pervaporation (PV) membranes. It was found that the PPOPP macroionophores activate the preferential transport of Zn²⁺ cations from aqueous solutions containing competing Cu²⁺, Ca²⁺, Mg²⁺, K⁺, and Na⁺ cations. The following separation orders were observed for PPOPPs with POP‐400 and POP‐1200: Zn²⁺ > Cu²⁺ ? Ca²⁺, Mg²⁺, K⁺, Na⁺, and for PPOPP with POP‐2000: Zn²⁺ > Cu²⁺,Ca²⁺ ? Mg²⁺, K⁺, Na⁺. Always, the particular cations are separated as: Zn²⁺ > Cu²⁺, Ca²⁺ > Mg²⁺, and K⁺ > Na⁺. The properties of PPOPPs were compared to respective transport and separation characteristics corresponding to those of respective poly(propylene glycol)s and poly(oxypropylene) bisphosphates. The results of investigation indicate that the bifunctional character of PPOPPs is caused by the presence of ionizable groups and probably pseudocyclic POP structures. By comparing the separation of cations in the simple MHS[FLM] system and the system supported by pervaporation unit [MHS[FLM‐PV] it was found that continuous dehydration of an organic FLM improves the system overall performance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1436–1445, 2004     

Effects of Difference in Ionic Radii on Chemical Ordering in Mixed‐Cation Silicate Glasses: Insights from Solid‐State 17O and 7Li NMR of Li–Ba Silicate Glasses

Understanding of the extent of cation disorder and its effect on the properties in glasses and melts is among the fundamental puzzles in glass sciences, materials sciences, physical chemistry, and geochemistry. Particularly, the nature of chemical ordering in mixed‐cation silicate glasses is not fully understood. The Li–Ba silicate glass with significant difference in the ionic radii of network‐modifying cations (~0.59 Å) is an ideal system for revealing unknown details of the effect of network modifiers on the extent of mixing and their contribution to the cation mobility. These glasses also find potential application as energy and battery materials. Here, we report the detailed atomic environments and the extent of cation mixing in Li–Ba silicate glasses with varying X_BaO [BaO/(Li₂O + BaO)] using high‐resolution solid‐state nuclear magnetic resonance (NMR) spectroscopy. The first ¹⁷O MAS and 3QMAS NMR spectra for Li–Ba silicate glasses reveal the well‐resolved peaks due to bridging oxygen (Si–O–Si) and those of the nonbridging oxygens including Li–O–Si and mixed {Li, Ba}–O–Si. The fraction of Li–O–Si decreases with an increase in X_BaO and is less than that predicted by a random Li–Ba distribution. The result demonstrates a nonrandom distribution of Li⁺ and Ba⁺ around NBOs characterized by a prevalence of the dissimilar Li–Ba pair. Considering the previously reported experimental results on chemical ordering in other mixed‐cation silicate glasses, the current results reveal a hierarchy in the degree of chemical order that increases with an increase in difference in ionic radius of the cation in the glasses [e.g., K–Mg (~0.66 Å) ≈Ba–Mg (~0.63 Å) ≈Li–Ba (~0.59 Å) > Na–Ba (~0.33 Å) > Na–Ca (~0.02 Å)]. The ⁷Li MAS NMR spectra of the Li–Ba silicate glasses show that the peak maximum increases with increasing X_BaO, suggesting that the average Li coordination number and thus Li–O distance decrease slightly with increasing X_BaO, potentially leading to an increased activation energy barrier for Li diffusion. Current experimental results confirm that the degree of chemical ordering due to a large difference in ionic radii controls the transport properties of the mixed‐cation silicate glasses.     

A single‐phase full‐color emitting phosphor Na3Sc2(PO4)3:Eu2+/Tb3+/Mn2+ with near‐zero thermal quenching and high quantum yield for near‐UV converted warm w‐LEDs

A single‐phase full‐color emitting phosphor Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ has been synthesized by high‐temperature solid‐state method. The crystal structure is measured by X‐ray diffraction. The emission can be tuned from blue to green/red/white through reasonable adjustment of doping ratio among Eu²⁺/Tb³⁺/Mn²⁺ ions. The photoluminescence, energy‐transfer efficiency and concentration quenching mechanisms in Eu²⁺‐Tb³⁺/Eu²⁺‐Mn²⁺ co‐doped samples were studied in detail. All as‐obtained samples show high quantum yield and robust resistance to thermal quenching at evaluated temperature from 30 to 200°C. Notably, the wide‐gamut emission covering the full visible range of Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ gives an outstanding thermal quenching behavior near‐zero thermal quenching at 150°C/less than 20% emission intensity loss at 200°C, and high quantum yield‐66.0% at 150°C/56.9% at 200°C. Moreover, the chromaticity coordinates of Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ keep stable through the whole evaluated temperature range. Finally, near‐UV w‐LED devices were fabricated, the white LED device (CCT = 4740.4 K, Ra = 80.9) indicates that Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ may be a promising candidate for phosphor‐converted near‐UV w‐LEDs.     

Borate melt structure: Temperature‐dependent B–O bond lengths and coordination numbers from high‐energy X‐ray diffraction

Borate melts containing <20 mol% Na₂O have been studied using high‐energy synchrotron X‐ray diffraction. Temperature dependencies of the mean B–O bond lengths are shown to vary strongly with soda content, by comparison to previous measurements on liquid B₂O₃ and Na₂B₄O₇. Whereas in liquid B₂O₃ linear thermal expansion of the BØ₃ units is observed, with coefficient α_BO = 3.7(2) × 10^?6 K^?1, this expansion is apparently slightly suppressed in melts containing <20 mol% Na₂O, and is dramatically reversed at the diborate composition. These effects are interpreted in terms of changes in the mean B–O coordination number, where the reaction BØ₄^? + BØ₃ ? BØ₃ + BØ₂O^? shifts to the right with increasing temperature. The empirical bond‐valence relationship is used to convert measured bond lengths, r_BO, to coordination numbers, n_BO, including a correction for the expected thermal expansion. This method is more accurate and precise than direct determination of n_BO from peak areas in the radial distribution functions. Gradients of Δn_BO/ΔT = ?3.4(3) × 10^?4 K^?1 close to the diborate composition, and Δn_BO/ΔT = ?0.3(1) × 10^?4 K^?1 for a 13(3) mol% Na₂O melt are observed, in reasonable agreement with Raman spectroscopic observations and thermodynamic modeling, with some quantitative differences. These observations go toward explaining isothermal viscosity maxima and changes in fragility across the sodium borate system.     

White‐Emitting Tuning and Energy Transfer in Eu2+/Mn2+‐Substituted Apatite‐Type Fluorophosphate Phosphors

Herein, a series of Eu²⁺&Mn²⁺substituted fluorophosphates Ca₆Gd₂Na₂(PO₄)₆F₂ phosphor with apatite structure have been synthesized and investigated by the powder X‐ray diffraction, photoluminescence spectra, fluorescence decay curves, thermal quenching, and chromaticity properties. Particularly, both Eu²⁺ and Mn²⁺ emissions at the two different lattice sites 4f and 6h in Ca₆Gd₂Na₂(PO₄)₆F₂ matrix have been identified and discussed. The dual energy transfer of Eu²⁺→Mn²⁺ and Gd³⁺→Mn²⁺ in Ca₆Gd₂Na₂(PO₄)₆F₂:Eu²⁺,Mn²⁺ samples have been validated and confirmed by the photoluminescence spectra. The dependence of color‐tunable on the activator concentration of Mn²⁺ was investigated to realize white light emission. By varying the doping concentration of the Mn²⁺ ion, a series of tunable colors including pure white light and candle light are obtained under the excitation of 350 nm. Moreover, the fluorescence decay curves have been fitted and analyzed using the Inokuti–Hirayama theoretical model to estimate the Eu–Mn interaction mechanism. We also investigated temperature‐dependent photoluminescence quenching characteristics according to the Arrhenius equation. Preliminary studies on the properties of the phosphor indicated that the obtained phosphors might have potential application as a single‐component white‐emitting phosphor for UV‐based white LEDs.     

Synthesis and characterization of new cardo poly(bisbenzothiazole)s from 1,1‐bis(4‐amino‐3‐mercaptophenyl)‐4‐tert‐butylcyclohexane dihydrochloride

A new monomer 1,1‐bis(4‐amino‐3‐mercaptophenyl)‐4‐tert‐butylcyclohexane dihydrochloride, bearing the bulky pendant 4‐tert‐butylcyclohexylidene group, was synthesized from 4‐tert‐butylcyclohexanone in three steps. Its chemical structure was characterized by ¹H NMR, ¹³C NMR, MS, FTIR, and EA. Aromatic poly(bisbenzothiazole)s (PBTs V) were prepared from the new monomer and five aromatic dicarboxylic acids by direct polycondensation. The inherent viscosities were in the range of 0.63–2.17 dL/g. These polymers exhibited good solubility and thermal stability. Most of the prepared PBTs V were soluble in various polar solvents. Thermogravimetric analysis showed the decomposition temperatures at 10% weight loss that were in the range of 495–534°C in nitrogen. All the PBTs V, characterized by X‐ray diffraction, were amorphous. The UV absorption spectra of PBTs V showed a range of λ_max from 334 to 394 nm. All the PBTs V prepared had evident fluorescence emission peaks, ranging from 423 to 475 nm with different intensity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2000–2008, 2006     

Methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel for enhanced catalytic activity of lipase of Bacillus coagulans MTCC‐6375

An alkaline thermotolerant bacterial lipase of Bacillus coagulans MTCC‐6375 was purified and immobilized on a methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel. The lipase was optimally bound to the matrix after 20 min of incubation at 55°C and pH 9 under shaking conditions. The matrix‐bound lipase retained approximately 50% of its initial activity at 70–80°C after 3 h of incubation. The immobilized lipase was highly active on medium chain length p‐nitrophenyl acyl ester (C: 8, p‐nitrophenyl caprylate) than other p‐nitrophenyl acyl esters. The presence of Fe³⁺, NH₄⁺, K⁺, and Zn²⁺ ions at 1 mM concentration in the reaction mixture resulted in a profound increase in the activity of immobilized lipase. Most of the detergents partially reduced the activity of the immobilized lipase. The immobilized lipase performed ～62% conversion in 12 h at temperature 55°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1420–1426, 2006     

Efficient red‐emitting phosphor of Eu3+‐activated (Na0.5Gd1.5)(TiSb)O7 derived via cation‐substitutions in Gd‐Pyrochlore

Rare‐earth (RE) titanate pyrochlore with perovskite‐layered structure is a well‐known engineering material in applied in many field. In this work, a red‐emitting phosphor of Gd_2?xNa_xTi_2?2xSb_2xO₇:Eu³⁺ (x = 0‐0.5) was developed via cation substitutions of (Sb⁵⁺→Ti⁴⁺) and (Na⁺→Gd³⁺) in Gd₂Ti₂O₇. The motivation is based on the fact that the introduction of cation‐disorders has been regarded to be an effective approach for improving the luminescent efficiency and thermal stability of RE‐activated materials. All the samples were synthesized via facile solid‐state reaction method. The morphology properties were measured via SEM and EDS measurements. The structural Rietveld refinement was performed to investigate the microstructure in pyrochlore lattices. The luminescence properties of Gd_2?xNa_xTi_2?2xSb_2xO₇:0.15Eu³⁺ (x = 0‐0.5) has a strict dependence on the cation substitution levels. The band energy of Gd₂Ti₂O₇ is 2.9 eV with a direct transition nature. The incorporation of Sb⁵⁺ and Na⁺ in the lattices moves the optical absorption to a longer wavelength. The cation disorder results in significant improvements of luminescence intensity, excitation efficiency in the blue region, longer emission lifetime and thermal stability.     

Studies on polycarbazole‐modified electrode and its applications in the development of solid‐state potassium and copper(II) ion sensors

Electrochemical synthesis of polycarbazole, having better stability and electrochromic activity, in dichloromethane containing 0.1 M tetrabutyl ammonium perchlorate (TBAP) is reported at 1.4 V versus Ag/AgCl. The electrochemistry based on cyclic voltammetric measurements in dichloromethane containing TBAP show redox behavior of the polymer associated to doping and de‐doping of ClO ion within the polymer interstices. The polycarbazole matrix obtained by the potentiostatic and potentiodynamic modes of electropolymerization is characterized based on scanning electron microscopy, differential calorimetry, and infrared spectroscopy. De‐doping of the polymer is studied by electrochemical reduction in TBAP‐free dichloromethane followed by incubation of the polymer film in 1 M aqueous KCl solution for 24 h. The open circuit potential (OCP) of doped and de‐doped polycarbazole modified electrode under the present experimental conditions is found to 462 and 19 mV, respectively, versus SCE in 0.1 M NH₄NO₃. The de‐doped polymer shows remarkable sensitivity and selective to Cu(II) ion compared to its sensitivity for Fe³⁺, Ni²⁺, Co²⁺, Pb²⁺, and Cu⁺ ions. A typical response of the de‐doped polymer electrode to Cu(II) ion is reported. On the other hand, ClO doped polymer is used in the development of solid‐state K⁺ ion sensors using dibenzo‐18‐crown‐6/valinomycin as a neutral carrier–based, plasticized poly vinyl chloride matrix membrane assembled over a polymer‐modified electrode. The doped polymer under this condition helps in maintaining charge stabilization across Pt/polymer and polymer/PVC interfaces. The lowest detection limit for the potassium ion sensor is 5 × 10⁻⁵ M with a slope of 58 mV/decade for valinomycin‐based sensor and 6.8 × 10⁻⁵ M with a slope of 54 mV for dibenzo‐18‐crown‐6 carriers with a wide linearity. The typical potentiometric results on the sensitivity, detection limits, and OCP to K⁺ ion recorded using present polymer are compared with the data recorded earlier using polyindole and a similar neutral carrier–based PVC membrane. A comparison on electrode kinetics of these two polymer‐modified electrodes also has been made using the data on Tafel plots to study the relative kinetic polarizability based on ion‐exchange currents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1749–1759, 2000     

Synthesis,photo‐, and electroluminescent properties of the soluble poly[(2,5‐diphenylene‐1,3,4‐oxadiazole)‐ 4,4′‐vinylene]

A novel soluble conjugated polymer, poly[(2,5‐diphenylene‐1,3,4‐oxadiazole)‐4,4′‐vinylene] (O‐PPV), containing an electron‐transporting group on the main chain of PPV, was synthesized according to HORNER mechanism. The oligo‐polymer with M_w = 1000 and T_d = 270°C is soluble in chloroform and tetrahydrofuran. The photoluminescent (PL) properties were investigated using different concentrations of solid‐state O‐PPV/PEO blends absorption and selective excitation measurements. The results show that PL arises from interchain charge‐transfer states in solid‐state O‐PPV. Compared with the analogous single‐layer device constructed with PPV (ITO/PPV/Al), which emits two peaks at λ = 520 nm and 550 nm (shoulder), the electroluminescence (EL) spectrum of the device [ITO/O‐PPV (80 nm)/Al] is a broad peak at λ_max = 509 nm. The quantum efficiency (0.13%) of the device ITO/O‐PPV/Al is much higher than that of the device ITO/PPV/Al, due to the introduction of the electron‐transporting group–oxadiazole units in the main chain of PPV. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3535–3540, 1999     

Immobilization of invertase onto dimer acid‐co‐alkyl polyamine

Invertase was immobilized onto the dimer acid‐co‐alkyl polyamine after activation with 1,2‐diamine ethane and 1,3‐diamine propane. The effects of pH, temperature, substrate concentration, and storage stability on free and immobilized invertase were investigated. Kinetic parameters were calculated as 18.2 mM for K_m and 6.43 × 10^?5 mol dm^?3 min^?1 for V_max of free enzyme and in the range of 23.8–35.3 mM for K_m and 7.97–11.71 × 10^?5 mol dm^?3 min^?1 for V_max of immobilized enzyme. After storage at 4°C for 1 month, the enzyme activities were 21.0 and 60.0–70.0% of the initial activity for free and immobilized enzyme, respectively. The optimum pH values for free and immobilized enzymes were determined as 4.5. The optimum temperatures for free and immobilized enzymes were 45 and 50°C, respectively. After using immobilized enzyme in 3 days for 43 times, it showed 76–80% of its original activity. As a result of immobilization, thermal and storage stabilities were increased. The aim of this study was to increase the storage stability and reuse number of the immobilized enzyme and also to compare this immobilization method with others with respect to storage stability and reuse number. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1526–1530, 2004     

High activity and wide temperature window of Fe‐Cu‐SSZ‐13 in the selective catalytic reduction of NO with ammonia

Fe‐Cu‐SSZ‐13 catalysts were prepared by aqueous solution ion‐exchange method based on the one‐pot synthesized Cu‐SSZ‐13. The catalysts were applied to the selective catalytic reduction (SCR) of NO with NH₃ and characterized by the means of XRD, UV‐Vis, EPR, XPS, NH₃‐TPD, and so on. The selected Fe‐Cu‐SSZ‐13‐1 catalyst exhibited the high NO conversion (>90%) in the wide temperature range (225–625°C), which also showed good N₂ selectivity and excellent hydrothermal stability. The results of XPS showed that the Cu and Fe species were in the internal and outer parts of the SSZ‐13 crystals, respectively. The results of UV‐Vis and EPR indicated that the monomeric Cu²⁺ ions coordinated to three oxygen atoms on the six‐ring sites and Fe monomers are the real active species in the NH₃‐SCR reaction. Furthermore, the influence of intracrystalline mass‐transfer limitations on the Fe‐Cu‐SSZ‐13 catalysts is related to the location of active species in the SSZ‐13 crystals. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3825–3837, 2015