Kinetics of azo‐initiated 1‐vinyl‐2‐pyrrolidone polymerizations at low conversions in aqueous media

The free‐radical polymerization behavior of 1‐vinyl,2‐pyrrolidone (NVP) was studied at low conversions, using capillary dilatometry. The aqueous media were kept at neutral pH and the studies were conducted isothermally, at 40 or 45°C. The azo‐type initiators used were 4,4′‐azobis‐4‐cyanopentanoic acid (ACPA), 2,2′‐azobisisobutyronitrile (AZBN), and 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane dihydrochloride] (ABDH). The monomer concentration and initiator concentration ranges were 1.17–2.34 mol L⁻¹ and 1–8 mmol L⁻¹, respectively. The rates of polymerization (R_p) and orders of reaction with respect to NVP and the initiator were evaluated and the kinetic equations were found to be R_p ∝ [NVP] [ACPA]^1.2; R_p ∝ [NVP] [AZBN]^1.1; and R_p ∝ [NVP]^2.2 [ABDH]^1.1. The polymers obtained were characterized by their viscosity numbers and correlation of the viscosity average molecular weights made with the type and amount of the azo initiator. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 239–246, 2000     

Synthesis of well‐defined polystyrene by radical polymerization using 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/feCl3/PPh3 initiation system

Well‐defined polystyrenes with an α‐hydrogen atom and an ω‐chlorine atom end groups and narrow polydispersity (M_n = 2500–4200, M_w/M_n = 1.29–1.48) have been synthesized by a free radical polymerization process using a 1,1,2,2‐tetraphenyl‐1,2‐ethanediol (TPED)/FeCl₃/PPh₃ initiation system. The end groups were monitored by ¹H nuclear magnetic resonance spectroscopy. When the polymerization of styrenes in bulk carried out at 120°C and the ratio of [St]₀ : [TPED]₀ : [FeCl₃]₀ : [PPh₃]₀ was 200 : 1 : 4 : 12, the polymerization exhibited some living/controlled radical polymerization characteristics. The polymerization mechanism was proposed proceeding via a reverse atom transfer radical polymerization (ATRP). Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed chain extension polymerization in the presence of CuCl/2,2′‐bipyridine catalyst system via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1607–1613, 2000     

A kinetic study on polymerization of methyl methacrylate with di‐t‐butyl perfumarate

Di‐t‐butyl perfumarate (DBPF) was found to induce the radical polymerizations of various vinyl monomers at 60°C in benzene, although the initiation activity was considerably lower than those of dimethyl 2,2′‐azobisisobutyrate and benzoyl peroxide. The polymerizations with DBPF showed a tendency of dead‐end polymerization. The polymerization of methyl methacrylate (MMA) with DBPF was kinetically studied in chlorobenzene. The initial polymerization rate (R_p) was given by R_p = k [DBPF]^0.5 [MMA]^1.1. The overall activation energy of the polymerization was 47 kJ/mol, a very low value. Use of this value and activation energies of propagation and termination for MMA gave an unexpectedly low activation energy (65 kJ/mol) to the decomposition of DBPF, a t‐butyl perester, in the polymerization system. An ESR study on the polymerization of di‐2‐ethylhexyl itaconate with DBPF revealed that the observed dead‐end tendency comes from the consumption of DBPF. These results suggest that the initiator efficiency of DBPF is considerably low in the present polymerization systems. Some solvent effect was observed on the polymerization of MMA with DBPF. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 218–224, 2000     

Polymerization of acrylonitrile using potassium peroxydisulfate as an initiator in the presence of a multisite phase‐transfer catalyst: A kinetic study

In this article, the kinetics and mechanism of the free‐radical polymerization of acrylonitrile (AN) using potassium peroxydisulfate (PDS) as a water‐soluble initiator in the presence of synthesized 1,4‐bis(triethyl methyl ammonium) benzene dichloride (DC‐X) as a phase‐transfer catalyst (PTC) were studied. The polymerization reactions were carried out under inert and unstirred conditions at a constant temperature of 60 ± 1°C in cyclohexane/water biphasic media. The rate of polymerization (R_p) increased with an increase in the concentrations of AN, PTC, and PDS. The order with respect to the monomer, initiator, and PTC was found to be 1.0, 0.5, and 0.5, respectively. R_p was independent of the ionic strength and pH of the medium. However, an increase in the polarity of the solvent slightly increased the R_p value. On the basis of the obtained results, a mechanism is proposed for the polymerization reaction. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of star‐shaped poly(ϵ‐caprolactone) by samarium‐based tetrafunctional initiator and its dilute‐solution properties

An in situ–generated tetrafunctional samarium enolate from the reduction of 1,1,1,1‐tetra(2‐bromoisobutyryloxymethyl)methane with divalent samarium complexes [Sm(PPh₂)₂ and SmI₂] in tetrahydrofuran has proven to initiate the ring‐opening polymerization of ?‐caprolactone (CL) giving star‐shaped aliphatic polyesters. The polymerization proceeded with quantitative conversions at room temperature in 2 h and exhibited good controllability of the molecular weight of polymer. The resulting four‐armed poly(?‐caprolactone) (PCL) was fractionated, and the dilute‐solution properties of the fractions were studied in tetrahydrofuran and toluene at 30°C. The Mark–Houwink relations for these solvents were [η] = 2.73 × 10^?2M_w^0.74 and [η] = 1.97 × 10^?2M_w^0.75, respectively. In addition, the unperturbed dimensions of the star‐shaped PCL systems were also evaluated, and a significant solvent effect was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 175–182, 2006     

A new polymerization method and kinetics for acrylamide: Aqueous two‐phase polymerization

The concept of aqueous two‐phase polymerization and a new polymerization method for the preparation of water‐soluble polymers are presented. The phase diagram of poly(acrylamide) (PAAm)‐poly (ethylene glycol) (PEG)‐water two‐phase system was measured by the gel permeation chromatography (GPC). The aqueous two‐phase of PAAm‐PEG‐water system can be easily formed. The critical concentration of phase separation was affected by the molecular weight of PEG. The aqueous two‐phase polymerization of acrylamide (AAm) has been successfully carried out in the presence of PEG by using ammonium persulfate (APS) as the initiator. The polymerization behaviors with varying concentration of AAm, initiator and PEG, the polymerization temperature, the molecular weight of PEG, and emulsifier types were investigated. The activation energy of aqueous two‐phase polymerization of AAm was 132.3 kJ/mol. The relationship of initial polymerization rate (R_p0) with APS and AAm concentrations was R_p0 ∝ [APS]^0.72 [AAm]^1.28. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Free radical kinetics of N‐methyl N‐vinyl acetamide polymerization at low conversions in aqueous media

N‐methyl N‐vinyl acetamide (NMNVA) monomer was polymerized at low conversions and its free radical kinetics were detailed using capillary dilatometry. The polymerizations were conducted isothermally, at 40°C using 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl) propane dihydrochloride] (ABDH) as initiator. Monomer concentration and initiator concentration ranges were 1.10–1.70 mol · L⁻¹ and 1–4 mmol · L⁻¹, respectively. The aqueous polymerization media were kept at neutral pH. The rates of polymerization (R_p) and orders of reaction with respect to NMNVA and ABDH concentrations were evaluated and the kinetic expression was found to be ideal, with R_p ∝ [NMNVA]^1.07 [ABDH]^0.61. The polymers obtained were characterized by their viscosity numbers and correlation of viscosity average molecular weights was made with the amount of ABDH initiator. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 337–341, 2001     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Studies on damping properties of P(MMA‐AN)/P(EA‐nBA) LIPNs

Using a two‐stage emulsion polymerization method, a series of poly(methyl methacrylate‐acrylonitrile)/poly(ethyl acrylate‐n‐butyl acrylate) [P(MMA‐AN)/P(EA‐nBA)] latex interpenetrating polymer networks (LIPNs) were synthesized by varying AN content, ratio of network I/network II, crosslinker content, and introducing chain transfer agent. The damping properties of the LIPNs were investigated using a Rheovibron Viscoelastometer. The results indicates that a suitable content of AN can improve the damping properties of the LIPNs. Three kinds of fillers were incorporated into the LPINs, respectively, to measure the change in the damping properties. Mica and TiO₂ both increased the damping properties of the LIPNs over the wide temperature range. For TiO₂‐filled LIPNs, it was observed that the tan δ values exceeded 0.4 over 112.6°C temperature range from −50 to 72.6°C. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 722–727, 2000     

p‐Acetylbenzylidene triphenylarsonium ylide initiated radical polymerization of methyl acrylate

Polymerization of methyl acrylate (MA), initiated by p‐acetyl benzylidene triphenylarsonium ylide (p‐ABTAY) in dioxan at (60 ± 1)°C for 1 h, follows nonideal kinetics (R_p ∝ [I]^0.21[M]^1.40) due to primary radical termination as well as degradative chain transfer reaction. The polymerization proceeded upto 20.49% conversion without gelation and results in the polymer of high molecular weight 98,000. The overall activation energy and the value of k_p²/k_t are 14 kJ mol^–1 and 18.75 × 10^–6 L mol^–1 s^–1, respectively. The ylide dissociates to form phenyl radical, which initiates the polymerization of MA. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

An iron‐based reverse ATRP process for the living radical polymerization of acrylonitrile

A hexa‐substituted ethane thermal iniferter, diethyl‐2,3‐dicyano‐2,3‐di(p‐tolyl) succinate (DCDTS), was firstly used as the initiator in the reverse atom transfer radical polymerization (RATRP) of acrylonitrile. FeCl₃ coordinated by isophthalic acid (IA) was used as the catalyst in this system. The polymerization in N,N‐dimethylformamide not only shows the best control of molecular weight and its distribution but also provides rather rapid reaction rate with the ratio of [AN] : [DCDTS] : [FeCl₃] : [IA] at 500 : 1 : 2 : 4. The polymers obtained were end‐functionalized by chlorine atom, and they were used as macroinitiators to proceed the chain extension polymerization in the presence of FeCl₂/IA catalyst system via a conventional ATRP process and polyacrylonitrile obtained was with M_n = 39,260, PDI = 1.25. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of 1,3‐benzodioxole end‐functionalized polymers via reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene was carried out in the presence of a novel RAFT reagent, bearing 1,3‐benzodioxole group, benzo [1,3]dioxole‐5‐carbodithioic acid benzo [1,3]dioxol‐5‐ylmethyl ester (BDCB), to prepare end‐functionalized polystyrene. The polymerization results showed that RAFT polymerization of styrene could be well controlled. Number–average molecular weight (M_n(GPC)) increased linearly with monomer conversion, and molecular weight distributions were narrow (M_w/M_n < 1.4). The successful reaction of chain extension and analysis of ¹H NMR spectra confirmed the existence of the functional 1,3‐benzodioxole group at the chain‐end of polystyrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3535–3539, 2006     

‘Living’ radical polymerization of styrene with AIBN/FeCl3/PPh3 initiating system via a reverse atom transfer radical polymerization process

Well‐defined polystyrenes with an α‐C(CH₃)₂(CN) and an ω‐chlorine atom end‐groups, and narrow polydispersity (M_n = 3000–4000 g mol⁻¹, M_w/M_n = 1.3–1.4) have been synthesized by a radical polymerization process using 2,2′‐azobisisobutyronitrile(AIBN)/FeCl₃/PPh₃ initiation system. When the ratio of [St]₀:[AIBN]₀:[FeCl₃]₀:[PPh₃]₀ is 200:1:4:12 at 110 °C, the radical polymerization is ‘living’, but the molecular weight of the polymers is not well‐controlled. The polymerization mechanism belongs to a reverse atom transfer radical polymerization (ATRP). Because the polymer obtained is end‐functionalized by a chlorine atom, it can then be used as a macroinitiator to perform a chain extension polymerization in the presence of CuCl/2,2′‐bipyridine catalyst system via a conventional ATRP process. The presence of a chlorine atom as an end‐group was determined by ¹H NMR spectroscopy. © 2000 Society of Chemical Industry     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

pH‐responsive polyzwitterions: A comparative study of acrylamide‐based polyampholyte terpolymers and polybetaine copolymers

A comparative study of pH‐responsive polyzwitterions (PZs) with polyampholyte or polybetaine architectures was conducted with well‐defined model polymer systems. Low‐charge‐density PZs, including ampholytic terpolymers composed of acrylamide (AM), sodium 3‐acrylamido‐3‐methylbutanoate, and (3‐acrylamidopropyl)trimethylammonium chloride and carboxybetaine copolymers composed of AM and 3‐(3‐acrylamidopropyldimethylammonio)propionate, were prepared via free‐radical polymerization in 0.5M NaCl to yield ter‐ and copolymers with random termonomer and comonomer distributions. Sodium formate was used as a chain‐transfer agent during the polymerizations to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distributions. The polymer compositions were determined via ¹³C‐NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na⁺ and Cl^?. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering (SEC–MALLS); the polymer MWs ranged from 1.4 to 1.5 × 10⁶ g/mol, corresponding to DPs of 1.6–1.9 × 10⁴ repeat units, with all the polymers exhibiting PDIs less than or equal to 2.1. The intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship agreed with the intrinsic viscosities determined via low‐shear dilute‐solution viscometry. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (R_g–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the PZs. The R_g–M and [η]–M relationships and viscometric data revealed that under size exclusion chromatography conditions, the poly[acrylamide‐co‐3‐(3‐acrylamidopropyldimethylammonio)propionate] betaine copolymers had more open, random‐coil conformations and greater polymer–solvent interactions than the ampholytic poly[acrylamide‐co‐sodium 3‐acrylamido‐3‐methylbutanoate‐co‐(3‐acrylamidopropyl)trimethylammonium chloride] terpolymers. The pH‐ and salt‐responsive dilute‐solution viscosity behavior of the PZs was examined to assess the effects of the polymer structure and composition on the solution properties. The polyampholyte terpolymers had greater solution viscosities and more pronounced stimuli‐responsiveness than the polybetaine copolymers because of their stronger intramolecular interactions and increased chain stiffness. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 24–39, 2004     

Functionalization of poly(tetrafluoroethylene‐co‐ethylene) film by radiation‐induced graft copolymerization

To introduce functional moieties to Tefzel film, a copolymer of tetrafluoroethylene and ethylene, graft copolymerization of vinyl monomers such as acrylonitrile (AN) and methacrylonitrile (MAN) was attempted by a preirradiation method in aqueous medium. Optimum conditions for obtaining the maximum percentage of grafting have been evaluated for both monomers. Maximum grafting of AN (52.2%) and MAN (77.7%) is obtained at a total dose of 3.14 and 2.69 × 10⁴ Gy, respectively, using [AN] = 3.018 mol/L and [MAN] = 1.177 mol/L in 10 mL of water. The effect of aliphatic alcohols of varying chain length, such as methanol, ethanol, isopropanol, n‐butanol, and cyclohexanol, on percentage add‐on of AN and MAN has also been studied. It has been found that all the alcohols decreased the percentage of grafting. Characterization of Tefzel and grafted Tefzel films has been carried out by IR spectroscopy and thermogravimetric analysis. Grafted Tefzel film has been found to have improved thermal resistance. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1171–1178, 2000     

Synthesis of polyacrylonitrile via reverse ATRP initiated by 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/CuCl2/2,2′‐bipyridine

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living‐radical polymerization of acrylonitrile (AN). 1,1,2,2‐Tetraphenyl‐1,2‐ethanediol (TPED) was first used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 53.2 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3529–3533, 2007     

Trimethylsilyl‐substituted triazole‐based ligand for copper‐mediated single‐electron transfer living radical polymerization of methyl methacrylate

The tripodal ‘click’ compound tris(4‐trimethylsilylmethyl‐1,2,3‐triazolylmethyl)amine (TTTA) was prepared and investigated as a ligand for copper‐catalysed single‐electron transfer living radical polymerization of methyl methacrylate (MMA). Bulk polymerizations catalysed by Cu⁰/CuBr₂/TTTA with a molar ratio of [MMA]₀/[ethyl‐2‐bromoisobutyrate]₀/[CuBr₂]₀/[TTTA]₀ = 200:2:1:1 and a 1.0 × 1.0 cm² Cu⁰ sheet were fast and well controlled (76% conversion with M_w/M_n = 1.19 after 3.5 h). Greater amounts of added air generally gave slower polymerizations although M_w/M_n remained low (<1.3) even when the polymerization was carried out under aerobic conditions. Decreasing initial concentrations of the Cu⁰/CuBr₂/TTTA catalyst system or polymerization temperatures also resulted in slower polymerizations and yielded polymers with broader dispersity. Kinetic studies in the temperature range 40–90 °C revealed an apparent activation energy of 22.6 kJ mol^?1. © 2014 Society of Chemical Industry     

4‐Acetamidophenyl acrylate copolymers with acrylonitrile and N‐vinyl‐2‐pyrrolidone: Synthesis,characterization, and reactivity ratios

4‐Acetamidophenyl acrylate (APA) was synthesized and characterized by IR, ¹H and ¹³C NMR spectroscopies. Homo‐ and copolymers of APA with acrylonitrile (AN) and N‐vinyl‐2‐pyrrolidone (NVP) were prepared by a free radical polymerization. All the copolymer compositions have been determined by ¹H NMR technique, and the reactivity ratios of the monomer pairs have been evaluated using the linearization methods Fineman–Ross, Kelen–Tudos, and extended Kelen–Tudos. Nonlinear error‐in‐variable model (EVM) method was used to compare the reactivity ratios. The reactivity ratios for copoly(APA–AN) system were APA(r₁) = 0.70 and AN(r₂) = 0.333, and for copoly(APA–NVP) system the values were APA(r₁) = 4.99 and NVP(r₂) = 0.019. Thermal stability and molecular weights of the copolymers are reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1919–1927, 2006