Pervaporation separation of water‐isopropanol mixtures using polymeric membranes: Modeling and simulation aspects

Pervaporation technique was used to separate water + isopropanol azeotropic mixtures at 30°C using pure sodium alginate, pure poly(vinyl alcohol), and blend membranes of sodium alginate containing 10 and 20 mass % of poly(vinyl alcohol). The membrane performance was studied by calculating flux, selectivity, pervaporation separation index, and enrichment factor. Pure sodium alginate membrane gave the highest pervaporation separation index for all compositions of water. Pervaporation experiments were carried out for 10 mass % containing water + isopropanol mixture at 30, 40, and 50°C. The Arrhenius activation parameters were computed. The PV results have been analyzed by considering complete mixing and plug flow models. Design parameters, like membrane area, permeate concentrations, flux, stage cut, separation selectivity, etc., have been calculated for different feed compositions of water in the mixture. Results are explained in terms of sorption‐diffusion principles. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1143–1153, 2005     

Modification of poly(vinyl alcohol) membranes using sulfur-succinic acid and its application to pervaporation separation of water–alcohol mixtures

For the purposes of the water-selective membrane material development for pervaporation separation, we crosslinked poly(vinyl alcohol) (PVA) with sulfur-succinic acid (SSA), which contains —SO₃OH, by heat treatment and investigated the effect of the crosslinking density on the separation of water–alcohol mixtures by pervaporation technique. The crosslinking reaction between PVA and SSA was characterized through Fourier transform infrared spectroscopy and differential scanning calorimetry tests by varying the amount of the crosslinking agent, the reaction temperature, and the swelling measurements of each pure component. The separation performance of the water–methanol mixture is not good due to the existence of sulfonic acid, hydrophilic group, in the crosslinking agent. However, for the water–ethanol mixture, the flux of 0.291 kg/m²h and the separation factor of 171 were obtained at 70°C when PVA-crosslinked membrane containing 7 wt % SSA was used. The same membrane also showed flux of 0.206 kg/m²h and a separation factor of 1969 at the same operating temperature. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1717–1723, 1998     

Pervaporation separation of water/dimethylformamide mixtures using poly(vinyl alcohol)‐g‐polyacrylamide copolymeric membranes

Grafted copolymeric membranes of poly(vinyl alcohol) with acrylamide (PVA‐g‐AAm) were developed and used in the pervaporation separation of water–dimethylformamide mixtures by varying the amount of water in the feed from 0 to 100%. From these data, the permeation flux, pervaporation separation index, diffusion coefficient, swelling index, and separation selectivity were calculated at 25, 35, and 45°C. The Arrhenius activation parameters for permeation flux ranged between 22 and 63 kJ/mol, while the activation energy for diffusion ranged between 23 and 67 kJ/mol. Separation selectivity was between 15 and 22. The highest permeation flux of 0.459 kg m^?2 h^?1 was obtained for the 93% grafted membrane at 90% of water in the feed mixture. The results are discussed using the principles of the solution–diffusion model. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 273–282, 2002     

Pervaporation dehydration of water/ethanol/ethyl acetate mixtures using poly(vinyl alcohol)–silica hybrid membranes

The novel organic–inorganic hybrid membranes were prepared from poly(vinyl alcohol) (PVA) and vinyltriethoxysilane (VTES). They were characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and contact angle metering. The as‐prepared membranes are formed at a molecular scale at a low VTES content. Aggregations in the surface of the as‐prepared membranes were clearly evident above 18.43 wt % VTES loading. The introduction of VTES into the PVA matrix resulted in a decrease in the crystalline and an increase in compactness and thermal stability of the as‐prepared membranes. Silica hybridization reduced the swelling of the as‐prepared membranes in water/ethanol/ethyl acetate mixtures, decreased the permeation flux, and remarkably enhanced water permselectivity in pervaporation dehydration of ethanol/ethyl acetate aqueous solution. The hybrid membrane with 24.04 wt % VTES has the highest separation factor of 1079 and permeation flux of 540 g m^?2 h^?1. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

石墨填充聚乙烯醇膜渗透蒸发分离苯和环己烷

采用液相共混法制备了石墨填充聚乙烯醇膜,采用FTIR,SEM,XRD等对石墨填充聚乙烯醇膜的物理和化学结构进行了分析表征,结果表明石墨与聚乙烯醇存在较强的氢键作用,石墨在聚乙烯醇中分散均匀,且具有一定的取向性.考察了石墨填充聚乙烯醇膜在苯和环己烷溶液中的溶胀和吸附行为.采用正电子湮没寿命谱仪表征了石墨聚乙烯醇膜的自由体积特性,计算得到石墨聚乙烯醇膜的表观自由体积分数,并且与渗透通量进行关联性对比.最后,研究了石墨含量和粒径对渗透蒸发分离性能的影响,结果表明,石墨的引入有利于苯的优先透过,石墨填充聚乙烯醇膜对苯和环己烷混合物具有良好的分离效果,苯的渗透通量和分离因子分别可达90.7 g•m^-2•h^-1和100.1.     

Pervaporation separation of dimethyl carbonate/methanol mixtures with regenerated perfluoro‐ion‐exchange membranes in chlor‐alkali industry

The waste perfluoro‐ion‐exchange membranes (PFIEMs) in chlor‐alkali industry were regenerated and used to the separation of dimethyl carbonate (DMC)/methanol (MeOH) mixtures by pervaporation process. The energy‐dispersive spectrum (EDS) demonstrates that the impurities on the surfaces of waste PFIEMs can be effectively cleared by the regeneration process. The degree of swelling, sorption, and pervaporation properties of the regenerated PFIEMs with different counter ions were investigated. The results indicate that the counter ions of PFIEMs conspicuously influence the degree of swelling, sorption, and pervaporation properties for DMC/MeOH mixtures. The degree of swelling and solubility selectivity both decreases with the alkali metal counter ions in the sequence: Li⁺ > Na⁺ > K⁺ > Cs⁺. The degree of swelling increases with MeOH concentration increasing in feed liquid. The pervaporation measurements illustrate that the permeation flux decreases and the separation factor increases with the rising in ion radius of counter ions. The increase of feed concentration (MeOH) and feed temperature is advantageous to improve permeation flux while at the cost of separation factor decreasing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Pervaporation of tertiary butanol/water mixtures through chitosan membranes cross‐linked with toluylene diisocyanate

Membranes made from 84% deacetylated chitosan biopolymer were cross‐linked by a novel method using 2,4‐toluylene diisocyanate (TDI) and tested for the separation of t‐butanol/water mixtures by pervaporation. The unmodified and cross‐linked membranes were characterized by Fourier transform infra red (FTIR) spectroscopy, X‐ray diffraction (XRD) studies and sorption studies in order to understand the polymer–liquid interactions and separation mechanisms. Thermal stability was analyzed by differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA) while tensile strength measurement was carried out to assess mechanical strength. The membrane appears to have good potential for breaking the aqueous azeotrope of 88.2 wt% t‐butanol by giving a high selectivity of 620 and substantial water flux (0.38 kg m^?2 hr^?1). The effects of operating parameters such as feed composition, membrane thickness and permeate pressure on membrane performance were evaluated. Copyright © 2005 Society of Chemical Industry     

Pervaporation behavior of PVA membrane containing β‐cyclodextrin for separating xylene isomeric mixtures

To evaluate molecular recognition function of β‐cyclodextrin to xylene isomers, β‐CD polymer of branching chain extension (β‐CD‐EGDE) was synthesized by crosslinking β‐CD with ethylene glycol diglycidyl ether (EGDE). The pervaporation blend membranes of β‐CD‐EGDE/PVA were prepared by casting an aqueous solution of PVA and β‐CD polymer mixture, and the membranes were used for separation of p‐/m‐ and p‐/o‐xylene mixtures. It was observed that the pristine PVA membrane almost had no selectivity for xylene isomer mixtures. The PVA membrane incorporating β‐CD polymer had molecular recognition function, which selectively facilitated the transport of the xylene isomers. To ascertain pervaporation behavior, the sorption and desorption processes of the membrane in xylenes were investigated. The sorption result showed that the complex formation constant between β‐CDs and xylenes played a key role in swelling behavior. There was a significant difference between diffusion coefficients D and D⁰, calculated from the sorption and desorption measurements, respectively, indicating that the diffusivity selectivity in desorption stage may have remarkable effect on the total selectivity during pervaporation process. © 2012 American Institute of Chemical Engineers AIChE J, 59: 604–612, 2013     

Synthesis and characterization of hybrid membranes using poly(vinyl alcohol) and tetraethylorthosilicate for the pervaporation separation of water–isopropanol mixtures

Hybrid membranes were prepared using poly(vinyl alcohol) (PVA) and tetraethylorthosilicate (TEOS) via hydrolysis and cocondensation reaction for the pervaporation separation of water‐isopropanol mixtures. The resulting membranes were characterized by Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry. The glass transition temperature of these membranes varied from 100 to 120°C with increasing TEOS content. Effects of crosslinking density and feed compositions on the pervaporation performances of the membranes were studied. The membrane containing 1.5:1 mass ratio of TEOS to PVA gave the highest separation selectivity of 900 at 30°C for 10 mass % of water in the feed mixture. It was found that the separation selectivity and permeation flux data are strongly dependent on the water composition of the feed and operating temperature. However, the membrane with the highest crosslinking density showed unusual pervaporation properties. The overall activation energy values were calculated using the Arrhenius‐type equation. The activation energy values for the permeation and diffusion varied from 49.18 to 64.96 and 55.13 to 67.31 kJ/mol, respectively. Pervaporation data have also been explained on the basis of thermodynamic quantities. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1304–1315, 2004     

Preparation and chemical reactions of rigid cross‐linked poly(vinyl chloride) foams modified by epoxy compounds

A novel method to prepare semi‐interpenetrating polymer network rigid cross‐linked poly(vinyl chloride) (c‐PVC) foams with improved shear toughness in the absence of anhydride components is reported. The cross‐linked network structure in the c‐PVC foams was composed of polyurea network modified by epoxy structure. The cellular morphology was characterized by scanning electron microscopy. Tensile, compressive, and shear properties of the foams were studied. The obtained c‐PVC foams showed high shear properties compared with the comparative samples with the same density and cellular morphology. Possible reactions during the preparation of c‐PVC foams were studied by means of Fourier transform infrared spectrometry and nuclear magnetic resonance measurements through the model experiments. The results showed that allophanate structure resulting from the reaction between isocyanate compounds and epoxy compounds formed in the molding step, which was included into the final cross‐linked network in the cross‐linking step. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40567.     

Characterization and preparation of polyion complex composite membranes for the separation of methyl tert‐butyl ether/methanol mixtures

A series of polyion complex (PIC) composite membranes composed of sodium alginate (SA) polyanion and chitosan polycation were prepared by varying the ratio of concentration. The interaction between SA and chitosan was investigated by FTIR, SEM, and X‐ray analysis and was related to mechanical properties and the swelling phenomenon. The overall PIC composite membranes showed the following results: the total thickness of the coating layer was thicker than that of pure SA composite, and increased with increasing the concentration of chitosan solution during PIC formation. This result was attributed to the diffusion of chitosan molecules from the liquid solution into the SA matrix, and the incorporation with SA molecules. For the PIC membranes prepared with different concentrations of polymer solution, their structural differences could not be detected from IR spectra but their morphological differences could be noticeably found from SEM. Furthermore, the amorphousness of PIC membranes and their elongation properties at break increased significantly as a function of polymer contents, whereas the tensile modulus decreased because of the physical transition effect. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 714–725, 2002     

Pervaporation of MTBE/methanol mixtures through PVA membranes

Sorption and pervaporation experiments were carried outwith PVA/PAA cross-linked membranes for the separation of azeotropic methyl tert-butyl ether and methanol mixtures. The influence of the PVA/PAA ratio and liquid mixture composition were investigated. With increasing PAA content in the membranes, solubilities and fluxes decreased and selectivities increased. Total sorption and fluxes increased with increasing concentration of McOH. Increasing the concentration of McOH resulted in decreasing selectivities. Because of polarity, McOH permeated selectively through the membranes. Sorption results showed the same tendency with pervaporation results.     

Separation characteristics of pervaporation membrane separation processes using modified poly(vinyl alcohol) membranes

Modified poly(vinyl alcohol) (PVA) membranes prepared by the ‘solution technique’ were tested for ethanol-water mixtures by varying the reaction density (X_cr = 0.05, 0.1) at various temperatures. The results are compared with those of PVA membranes (X_cr = 0.05) prepared by the technique of the GFT Company, Germany.     

Crosslinked blended poly(vinyl alcohol)/N-methylol nylon-6 membranes for the pervaporation separation of ethanol–water mixtures

Crosslinked blended membranes of poly(vinyl alcohol) (PVA) and N-methylol nylon-6 were prepared either by thermal crosslinking at 180°C or by chemical crosslinking with maleic acid. The pervaporation performance for the separation of ethanol–water mixtures of these membranes was investigated in terms of feed concentration, PVA content, and crosslinking agent content. The pervaporation performance of two differently crosslinked membranes was strongly influenced by the nature of the crosslinkage. Significant improvement in the pervaporation separation index can be achieved for chemically crosslinked membranes. From the comparison between the pervaporation and sorption tests, it is suggested that, for hydrophilic membranes, sorption properties dominate the pervaporation performance at feed solutions of higher water content, while diffusion properties govern at feed solutions of higher ethanol content. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 317–327, 1998     

Divinyl benzene cross‐linked HTPB‐based polyurethaneurea membranes for separation of p‐/o‐xylene mixtures by pervaporation

Cross‐linked hydroxy terminated polybutadiene (HTPB)‐based polyurethaneurea (PU), HTPB‐divinyl benzene (DVB)‐PU, was synthesized by a three‐step polymerization process. It was first used as membrane material to separate p‐/o‐xylene mixtures by pervaporation (PV). The effects of the content of cross‐linker DVB, feed concentration, and operating temperature on the PV performance of HTPB‐DVB‐PU membranes were investigated. The membranes demonstrated p‐xylene permselectivity as well as high total flux. The introduction of DVB significantly enhanced the temperature resistance ability of the HTPB‐DVB‐PU membranes. With increasing DVB content, the separation factor increased while the total flux decreased a little. The highest separation factor reaches 2.01 and the total flux is 33 g/m²h with feed concentration of 10 wt % p‐xylene at 30°C. These PV performances with increasing DVB content were explained in terms of the view point of chemical compositions and physical structures of the HTPB‐DVB‐PU membranes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Pervaporation membranes from natural rubber latex grafted with poly(2‐hydroxyethyl methacrylate) (NR‐g‐PHEMA) for the separation of water–acetone mixtures

NR‐graft‐PHEMA latexes were synthesized by the use of graft emulsion polymerization. By increasing the HEMA monomer concentration, we found that the grafting percentage (GP) also increased. In addition, GP increased significantly at low initiator concentrations before it leveled off at moderate concentrations, and a slight decrease was observed at high initiator concentrations. NR‐g‐PHEMA latexes were prepared as pervaporation membranes for the separation of water–acetone mixtures. From the equilibrium swelling, the nonideal behavior of membrane swelling in water–acetone mixtures was found such that there appeared the maximum swelling degree at a certain concentration of liquid mixtures. Moreover, the water concentration at maximum swelling shifted to high water concentration with increasing amount of graft‐PHEMA. The sorption study suggested the preferential sorption of water on the membranes. Also, the sorption isotherms implied that there was a coupling between water and acetone molecules. Pervaporation separation of water–acetone mixtures was studied with NR‐g‐PHEMA membranes. As the feed water concentration increased, the partial water fluxes increased in contrast to the partial fluxes of acetone. From the permeation ratio, θ_w, the strong coupling of acetone on the water transport was observed, particularly for the membrane with high graft‐PHEMA under acetone‐rich conditions. As the feed temperature increased, the total permeation across the membranes was enhanced. The partial fluxes of water and acetone as a function of temperature followed the Arrhenius relationship by which the activation energies for permeation were estimated as 3.53 kJ/mol for water and 21.95 kJ/mol for acetone. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Pervaporation separation of isopropanol/benzene mixtures using inorganic–organic hybrid membranes

A series of pervaporation hybrid membranes were prepared from polyethylene glycol (PEG) and phenylaminomethyl trimethoxysilane (PAMTMS) based on the sol‐gel process, in which PEG was used as an organic moiety to improve the affinity for organic alcohols and silicone of PAMTMS was used as inorganic moiety to increase the permeation flux of organic species. Their application to separate isopropanol/benzene mixtures was investigated. FTIR spectra confirmed the reaction products. DSC measurement revealed that the influence of PEG content on the T_g and thermal behavior of membranes A, B, and C. FE‐SEM images exhibited that phase‐separated structure has occurred when the PEG content elevated to some extent. Pervaporation experiments showed that the permeation flux increased and the separation factor decreased with an increase in isopropanol (IPA) content in feed at 30°C. Meanwhile, the separation factor increased with an increase in feed temperature at 60 vol % IPA content. Moreover, it was found that the permeation flux was independent of the feed temperature, suggesting that feed temperature has little impact on the thermal motion of polymer chains. The increasing cross‐linking degree in hybrid matrix might be responsible for such trend. Based on these findings, it can be concluded that these pervaporation hybrid membranes have potential applications in the separation of isopropanol/benzene binary mixtures. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Pervaporation characteristics and structure of poly(vinyl alcohol)/poly(ethylene glycol)/tetraethoxysilane hybrid membranes

Poly(vinyl alcohol) (PVA) blended with poly(ethylene glycol) (PEG) was crosslinked with tetraethoxysilane (TEOS) to prepare organic–inorganic PVA/PEG/TEOS hybrid membranes. The membranes were then used for the dehydration of ethanol by pervaporation (PV). The physicochemical structure of the hybrid membranes was studied with Fourier transform infrared spectra (FT‐IR), wide‐angle X‐ray diffraction WXRD, and scanning electron microscopy (SEM). PVA and PEG were crosslinked with TEOS, and the crosslinking density increased with increases in the TEOS content, annealing temperature, and time. The water permselectivity of the hybrid membranes increased with increasing annealing temperature or time; however, the permeation fluxes decreased at the same time. SEM pictures showed that phase separation took place in the hybrid membranes when the TEOS content was greater than 15 wt %. The water permselectivity increased with the addition of TEOS and reached the maximum at 10 wt % TEOS. The water permselectivity decreased, whereas the permeation flux increased, with an increase in the feed water content or feed temperature. The hybrid membrane that was annealed at 130°C for 12 h exhibited high permselectivity with a separation factor of 300 and a permeation flux of 0.046 kg m^?2 h^?1 in PV of 15 wt % water in ethanol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Modification of poly(vinyl alcohol) using maleic acid and its application to the separation of acetic acid-water mixtures by the pervaporation technique

The ‘solution technique’ modification of poly(vinyl alcohol) (PVA) using maleic acid was carried out with the help of triethanolamine/water catalysts. The resulting PVA membranes were characterized by differential scanning calorimetry, infrared spectroscopy, and tensile studies to investigate the reaction between PVA polymer and maleic acid. It was found that the resulting PVA membranes had two portions, branched and crosslinked, and there were no more branched than cross-linked portions. For the pervaporation separation of the acetic acid-water system, two reaction densities (X_cr = mole maleic acid per mole monomeric unit of PVA) of 0.05 and 0.1 were studied for the separation of the entire range of mixture compositions at 25° C. The separation factors of the X_cr = 0.05 modified PVA membranes were higher than those of the X_cr 0.1 modified ones and the highest separation factor of 7.80 was obtained at 70wt% water in the feed with the X_cr = 0.05 modified PVA membrane.     

Dehydration of water–alcohol mixtures by vapor permeation through PVA/clay nanocomposite membrane

An organic/inorganic hybrid nanocomposite membrane, poly(vinyl alcohol)/clay (PVAC), was prepared. The morphology of PVAC nanocomposite membranes were characterized using transmission electron microscopy (TEM), X‐ray diffraction (XRD), and atomic force microscopy (AFM). The crystallinity and surface roughness increases with an increasing clay content in the PVAC nanocomposite membrane. Compared with the pure poly(vinyl alcohol) (PVA) membrane, the hybrid nanocomposite membrane (PVAC) shows an improvement in the thermal stability and the prevention of the water‐soluble property. The oxygen permeability and the water‐vapor permeation rate decreases with an increasing clay content (1–3 wt %) in the PVAC nanocomposite membranes. In addition, the effects of the clay content on the vapor‐permeation performance of an aqueous ethanol solution through the PVAC nanocomposite membranes was also investigated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3632–3638, 2003