TiO2 nanoparticles catalysed synthesis of 2-arylbenzimidazoles and 2-arylbenzothiazoles using hydrogen peroxide under ambient light

A H₂O₂/TiO₂ P25 nanoparticle system has been examined and applied towards synthesis of a wide range of 2-substituted benzimidazole and benzothiazole derivatives from oxidative coupling of aromatic 1,2-phenylendiamine and 2-aminothiophenol with aromatic aldehydes bearing different types of substituents.     

Photocatalytic activity of TiO2-capped ZnO nanoparticles

Using a combined hydrothermal and sol–gel route, TiO₂ -capped ZnO nanoparticles with an average size of 60 nm were prepared. The titania shell was amorphous with a thickness of ~10 nm. Formation of Zn₂TiO₄ phase at higher calcination temperature was noticed. Effects of Ti/Zn molar ratio and coating time on the thickness of TiO₂ shell and the photoactivity of the particles for decolorization of Methylene Blue (MB) under UV lamp irradiation (3 mW/cm²) were investigated. The nanoparticles were characterized by X-ray diffraction, transmission electron microscopy, fourier-transform infrared spectrometry (FTIR), diffuse reflectance spectroscopy (DLS), and atomic absorption spectroscopy. Analysis of the photoactivity results according to Langmuir–Hinshelwood model revealed a two-step decolorization process with a high kinetics rate at the early stage followed by a slower step. The capped nanoparticles synthesized under specific conditions exhibited higher photodecolorization yield and faster kinetics in comparison to the uncoated ZnO and P25-Degussa TiO₂ nanoparticles.     

Economical study for hydrogen production from seawater using renewable energy in Egypt

This study looks into the possibilities of hydrogen production in the north coast and red-sea Zone, Egypt, to conver renewable energy to hydrogen (power to gas). The main purpose is to estimate the power needed for each kg of hydrogen production from seawater using renewable energy and then the quantity of desalinated seawater needed to cover this cost. We will discuss different scenarios; the main two scenarios are photovoltaic (PV) solar with reverse osmosis (RO) desalination and concentrating solar power (CSP) with multi-effect desalination (MED).     

Photocatalytic properties of silver nanoparticles decorated nanobranched TiO2 nanofibers

In this study, nanobranched TiO2 nanofibers and silver loaded nanobranched TiO2 nanofibers were prepared by electrospinning technique followed by TiCl4 aqueous solution treatment and silver photodeposition method. Field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were employed to investigate the morphology of the products. X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS) were conducted on the samples to study their chemical composition as well as crystallographic structure. The photocatalytic activities of these produced nanofibers were examined with two organic dyes, methylene blue and methyl orange, under ultraviolet (UV) light irradiation. The effect of nanobranches and silver modification on TiO2 nanofibers was revealed in the photocatalysis process. The photocatalytic degradation rates of silver loaded on nanobranched TiO2 nanofibers were 1.6 and 1.7 times as that of pure TiO2 nanofibers in the presence of methylene blue and methyl orange, respectively, which indicated silver nanoparticles combined nanobranches modified on the surface of TiO2 nanofibers could enhance the photocatalytic ability.     

Analysis of the electron transport properties in dye-sensitized solar cells using highly ordered TiO2 nanotubes and TiO2 nanoparticles

This study uses TiO2 nanoparticles and highly ordered anatase TiO2 nanotubes (AOTnt) as thin film photoanodes for dye-sensitized solar cells (DSSCs). DSSCs are assembled by single-layer and double-layer films of photoanodes and their electron transfer performance is compared. TiO2 nanoparticles were fabricated by the sol-gel method, and AOTnts were grown on titanium foil. This study uses TiO2 nanoparticles or AOTnts to prepare single-layer photoanodes and TiO2 nanoparticles coated on an AOTnt film to fabricate double-layer photoanodes. These three different photoanodes are soaked in dye and assembled into DSSCs, and their open-loop voltage recession, electrochemical impedance, lifetime, life cycle, and effective diffusion coefficient are measured. Electron transfer efficiency of the photoanodes and light harvesting efficiency are further analyzed. The results show that the electron transfer efficiency, open-loop voltage recession, lifetime, life cycle, and effective diffusion coefficient of the DSSCs assembled using double-layer photoanodes (AOTnt-TiO2) are superior to those of single-layer photoanodes (TiO2 or AOTnt).     

Photocatalytic microreactor using anodized TiO2 nanotube array

Photocatalytic microreactor using an anodized TiO₂ nanotube/Ti bi-layered plate was fabricated. The inner diameter and length of TiO₂ nanotube were controllable by the anodization voltage and time. The photocatalytic reduction of p-nitrophenol was conducted in the microreactor. The experimental results were well fitted by a model assuming parabolic velocity profile and zero-order kinetics of surface reaction. The photocatalytic activity of TiO₂ nanotube was enhanced as the surface area was increased by anodization voltage and time.     

Photocatalytic degradation of dye pollutants under solar,visible and UV lights using green synthesised CuS nanoparticles

A green method for the solvothermal synthesis of copper sulphide nanoparticles (CuS NPs) using xanthan gum as a capping agent was developed. The CuS NPs were characterised by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, Brunauer–Emment–Teller, zeta analysis, thermal gravimetric– differential thermal analysis, Fourier transform infrared and UV–visible absorption spectra. These characterisations together determine the composition, structural, thermal and optical properties. The UV–visible spectrum had a broad absorption in the visible range. The particle size of the products was observed by TEM in the range of 8–20 nm. The photocatalytic performance of the CuS NPs was evaluated for the degradation of organic dyes (methylene blue, rhodamine B, eosin Y and congo red) under irradiation of solar, visible and UV lights. The CuS NPs showed good photocatalytic activity. Kinetic analyses indicate that the photodegradation rates of dyes usually follow pseudo-first-order kinetics for degradation mechanisms.     

Synthesis and dye-sensitized solar cell performance of nanorods/nanoparticles TiO2 from high surface area nanosheet TiO2

High surface area nanosheet TiO2 with mesoporous structure were synthesized by hydrothermal method at 130 degrees C for 12 h. The samples characterized by XRD, SEM, TEM, SAED, and BET surface area. The nanosheet structure was slightly curved and approximately 50-100 nm in width and several nanometers in thickness. The as-synthesized nanosheet TiO2 had average pore diameter about 3-4 nm. The BET surface area and pore volume of the sample were about 642 m(2)/g and 0.774 cm(3)/g, respectively. The nanosheet structure after calcinations were changed into nanorods/nanoparticles composite with anatase TiO2 structure at 300-500 degrees C (10-15 nm in rods diameter and about 5-10 nm in particles diameter). The solar energy conversion efficiency (eta) of the cell using nanorods/nanoparticles TiO2 (from the nanosheet calcined at 450 degrees C for 2 h) with mesoporous structure was about 7.08% with Jsc of 16.35 mA/cm(2), Voc of 0.703 V and ff of 0.627; while eta of the cell using P-25 reached 5.82% with Jsc of 12.74 mA/cm(2), Voc of 0.704 V, and ff of 0.649.     

Photocatalytic degradation of aqueous propoxur solution using TiO2 and Hbeta zeolite-supported TiO2

Photocatalytic activity of TiO2 and zeolites supported TiO2 were investigated using propoxur as a model pollutant. Hbeta, HY and H-ZSM-5 zeolites were examined as supports for TiO2. Hbeta was chosen as the TiO2 support based on the adsorption capacity of propoxur on these zeolites (Hbeta>HY=H-ZSM-5). TiO2/Hbeta photocatalysts with different wt.% were prepared and characterized by XRD, FT-IR and BET surface area. The progress of photocatalytic degradation of aqueous propoxur solution using TiO2 (Degussa P-25) and TiO2 supported on Hbeta zeolite was monitored using TOC analyzer, HPLC and UV-vis spectrophotometer. The degradation of propoxur was systematically studied by varying the experimental parameters in order to achieve maximum degradation efficiency. The initial rate of degradation with TiO2/Hbeta was higher than with bare TiO2. TOC results revealed that TiO2 requires 600min for complete mineralization of propoxur whereas TiO2/Hbeta requires only 480min. TiO2/Hbeta showed enhanced photodegradation due to its high adsorption capacity on which the pollutant molecules are pooled closely and hence degraded effectively.     

Photocatalytic activity of erbium-doped TiO2 nanoparticles immobilized in macro-porous silica films

A macro-porous silica film served as mechanical support to immobilize TiO₂ nanoparticles, which were doped with erbium. The films and the nanoparticles were prepared by sol–gel route. The nanoparticles exhibited photocatalytic activity under visible light. We obtained a degradation rate of methylene blue that followed first order kinetics. The sensitization of the nanoparticles to visible light was attributed to a red shift in the band-gap of the TiO₂ due to the addition of erbium ions.     

Laser-assisted production of spherical TiO2 nanoparticles in water

TiO(2) nanoparticles with controllable average diameter have been obtained by laser ablation in water. A monomode ytterbium doped fiber laser (YDFL) was used to ablate a metallic titanium target placed in deionized water. The resulting colloidal solutions were subjected to laser radiation to study the resizing effect. The crystalline phases, morphology and optical properties of the obtained nanoparticles were characterized by means of transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), x-ray energy dispersive spectroscopy (EDS) and UV-vis absorption spectroscopy. The colloidal suspensions produced consisting of titanium dioxide crystalline nanoparticles show almost perfect spherical shape with diameters ranging from 3 to 40 nm. The nanoparticles are polycrystalline and exhibit anatase as well as rutile phases.     

TiO2 nanotubes infiltrated with nanoparticles for dye sensitized solar cells

We present a detailed study of the infiltration of titanium dioxide (TiO(2)) nanotubes (NTs) with TiO(2) nanoparticles (NPs) for dye sensitized solar cells (DSSCs). The aim is to combine the merits of the NP's high dye loading and high light harvesting capability with the NT's straight carrier transport path and high electron collection efficiency to improve the DSSC performance. On infiltrating NTs with TiCl(4) solution followed by hydrothermal synthesis, 10 nm size NPs were observed to form a conformal and dense layer on the NT walls. Compared with the bare NT structure, dye loading of this mixed NT and NP structure is more than doubled. The overall photon conversion efficiencies of the fabricated DSSCs are improved by 152%, 107%, and 49% for 8, 13, and 20 μm long NTs, respectively. Electron transport and recombination parameters were extracted based on electrochemical impedance spectroscopy measurements. Although a slight reduction of electron lifetime was observed in the mixed structures due to enhanced recombination with a larger surface area, the diffusion length is still significantly longer than the NT length used, suggesting that most electrons are collected. In addition to dye loading and hence photocurrent increment, the photovoltage and filling factor were also improved in the mixed structure due to a low serial resistance, leading to the enhancement of the overall efficiency.     

Enhanced hydrogen production on porous TiO2 nanotube arrays

Well aligned TiO2 nanotube arrays have been synthesized via anodization in an NH4F and ethylene glycol electrolyte; the resulting carbon-entrained films were treated by oxygen and argon microwave plasma. It was found that as-prepared amorphous TiO2 nanotubes can be easily crystallized into anatase at temperature lower than 150 degrees C. Carbon can be effectively eliminated in oxygen plasma and a new secondary porosity was emerged. It was found such a porous film has obvious photovoltaic and hydrogen production enhancement under simulated solar irradiation compared with that crystallized in inert argon plasma. This phenomenon may be attributed to the improvement of light adsorption and its excellent capability of hole-electron separation derives from highly ordered nanoporous configurations.     

纳米La-TiO2光催化降解甲基橙废水的研究

采用溶胶-凝胶法制备了纯TiO2和La掺杂TiO2复合纳米粉体,通过XRD,UV-Vis等测试手段分析了在紫外光照射下,以降解甲基橙为探针反应研究其可见光催化性能。结果显示样品均为锐钛矿相纳米TiO2,稀土元素镧掺杂后纳米TiO2特征衍射峰宽化,强度降低;掺入的La主要以La2O3的形式存在,同时有一部分形成Ti-O-La键;La掺杂可减小TiO2晶粒尺寸及增大催化剂比表面积;与未掺杂的二氧化钛相比较,适当含量的镧掺杂可有效促进TiO2表面光生载流子的分离,从而显著提高其光催化活性。当La/Ti的摩尔比为0.010时,可见光催化性能最好。     

Photocatalytic degradation and mineralization of dye pollutants from wastewater under visible light using synthetic CuO-VO2/TiO2 nanotubes/nanosheets

CuO-VO₂/TiO₂ as a new nanocomposite was synthesized through hydrothermal method and identified by various spectroscopic techniques including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray analysis (EDX), UV–visible, differential reflectance spectroscopy (DRS), and Mott–Schottky. The presence of nanotubes/nanosheets in the synthesized nanocomposite was confirmed by HR-TEM. The anatase and rutile crystalline forms of TiO₂ were detected by Raman spectroscopy and X-ray diffraction (XRD). XPS analysis confirmed the presence of CuO and VO₂ in the nanocomposite. The surface area and the band-gap energy of the nanocomposite were determined via N₂ adsorption–desorption analysis and DRS. The presence of a p–n junction between TiO₂ (n-type) and CuO/VO₂ (p-type) was confirmed by the Mott–Schottky analysis. The photocatalytic activity of the nanocomposite against methylene blue (MB), methyl orange (MO), and cango red (CR) was studied under visible-light irradiation. The times of degradation for the decomposition of the dyes were 10–25 min. The rate constants of degradation for MB, MO, and CR were calculated as 0.34, 0.090, and 0.155 min^?1, respectively. The catalyst was recovered four times. In addition, the mineralization of the dyes was investigated by chemical oxygen demand (COD). The reaction was performed in the presence of different radical scavengers, and the ·OH was found to be the predominantly active species in the photodegradation of the dyes.

     

Photodecomposition of volatile organic compounds using TiO2 nanoparticles

This study examined the photodecomposition of volatile organic compounds (VOCs) using TiO2 catalyst fabricated by the Submerged Arc Nanoparticle Synthesis System (SANSS). TiO2 catalyst was employed to decompose volatile organic compounds and compare with Degussa-P25 TiO2 in terms of decomposition efficiency. In the electric discharge manufacturing process, a Ti bar, applied as the electrode, was melted and vaporized under high temperature. The vaporized Ti powders were then rapidly quenched under low-temperature and low-pressure conditions in deionized water, thus nucleating and forming nanocrystalline powders uniformly dispersed in the base solvent. The average diameter of the TiO2 nanoparticles was 20 nm. X-ray diffraction analysis confirmed that the nanoparticles in the deionized water were Anatase type TiO2. It was found that gaseous toluene exposed to UV irradiation produced intermediates that were even harder to decompose. After 60-min photocomposition, Degussa-P25 TiO2 reduced the concentration of gaseous toluene to 8.18% while the concentration after decomposition by SANSS TiO2 catalyst dropped to 0.35%. Under UV irradiation at 253.7 +/- 184.9 nm, TiO2 prepared by SANSS can produce strong chemical debonding energy, thus showing great efficiency, superior to that of Degussa-P25 TiO2, in decomposing gaseous toluene and its intermediates.     

Photocatalytic degradation of Azure and Sudan dyes using nano TiO2

The present study investigates the dependence of photocatalytic rate on molecular structure of the substrate that is degraded. The photocatalytic degradation of Azure (A and B) and Sudan (III and IV) dyes, having similar structure, but different functional groups, were investigated with two catalysts. The photocatalytic activity of solution combustion synthesized TiO(2) (CS TiO(2)) was compared with that of Degussa P-25 for degrading these dyes. The effect of solvents and mixed-solvent system on photodegradation of Sudan III was investigated. The photodegradation rate was found to be higher in solvents with higher polarity. The effect of pH and the presence of metal ions in the form of chloride and nitrate salt, on degradation rate of Azure A was also investigated. The metal ions significantly reduced the photocatalysis rates. A detailed Langmuir-Hinshelwood kinetic model has been developed to explain the effect of metal ions on degradation rate of the substrate. This model elucidates the contribution of holes and electrons towards degradation of the dye.     

Photocatalytic degradation of polycyclic aromatic hydrocarbons on soil surfaces using TiO(2) under UV light

The photocatalytic degradation of phenanthrene (PHE), pyrene (PYRE) and benzo[a]pyrene (BaP) on soil surfaces in the presence of TiO(2) using ultraviolet (UV) light source was investigated in a photo chamber, in which the temperature was maintained 30 degrees C. The effects of various factors, namely TiO(2), soil pH, humic acid, and UV wavelength, on the degradation performance of polycyclic aromatic hydrocarbons (PAHs) were studied. The results show that photocatalytic degradation of PAHs follows the pseudo-first-order kinetics. Catalyst TiO(2) accelerated the photodegradation of PHE, PYRE and BaP significantly, with their half-lives being reduced from 533.15 to 130.77h, 630.09 to 192.53h and 363.22 to 103.26h, respectively, when the TiO(2) content was 0.5%. In acidic or alkaline conditions, the photocatalytic degradation rates of the PAHs were greater than those in neutral conditions. Humic acid significantly enhanced the PAH photocatalytic degradation by sensitizing radicals capable of oxidizing PAHs. Photocatalytic degradation rates of PYRE and BaP on soil surfaces with 2% TiO(2) were different at UV irradiation wavelengths of 254, 310 and 365nm, respectively. The synergistic effect of UV irradiation and TiO(2) catalysis was efficient for degradation of PAHs in contaminated soil.