Synthesis and characterization of amphiphilic hydroxypropylcellulose‐graft‐poly(ε‐caprolactone)

An amphiphilic graft copolymer, hydroxypropylcellulose‐graft‐poly(ε‐caprolactone) (HPC‐g‐PCL), was synthesized by bulk polymerization without a catalyst and characterized with one‐dimensional and two‐dimensional NMR spectroscopy. Molar substitution of ε‐caprolactone on HPC (MS_CL) was estimated by both gravimetry and ¹H‐NMR, and the gravimetric method was considered suitable for MS_CL determination. Heterogeneity in the HPC‐g‐PCL film was suggested by a microscopic study, and the existence of PCL‐rich crystalline regions was confirmed by the results of X‐ray diffraction and differential scanning calorimetry (DSC). The double endotherm observed in the DSC scans of HPC‐g‐PCL was associated with the different molecular weight fractions in the copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 718–727, 2003     

Separation and characterization of poly(styrene‐co‐acrylonitrile)‐graft‐poly(propylene oxide) polymer stabilizer formed in dispersion polymerization of styrene and acrylonitrile in polyether

Poly(styrene‐co‐acrylonitrile)‐graft‐poly(propylene oxide) (PSAN‐graft‐PPO), the stabilizer formed in situ in the dispersion polymerization of styrene, acrylonitrile and macromonomer PPO maleate in PPO polyol, was separated from ungrafted copolymer PSAN by liquid chromatography. After the determination of the separation conditions by thin‐layer chromatography, the effective separation of the graft polymer from copolymer PSAN was achieved by liquid column chromatography. The graft efficiency and the composition of the graft polymer was determined by UV and ¹H NMR, and the formation characteristics of the graft polymer are discussed. © 2001 Society of Chemical Industry     

Conventional and RAFT radical copolymerizations of β‐pinene with N‐substituted maleimides

The feasibility of the radical copolymerizations of β‐pinene with three N‐substituted maleimides, i.e. N‐phenylmaleimide (PhMI), N‐methylmaleimide (MeMI), and N‐ethylmaleimide (EtMI), was clarified for the first time. The copolymerization rates decreased in the order PhMI > MeMI > EtMI. A marked penultimate effect on the activity of the N‐substituted maleimide‐terminated radicals was found in these copolymerizations. The penultimate monomer reactivity ratios evaluated by the nonlinear method were r₁ = 0.10, r′₁ = 8.30, r₂ = r′₂ = 0 for PhMI–β‐pinene, r₁ = 0.20, r′₁ = 7.09, r₂ = r′₂ = 0 for MeMI–β‐pinene, and r₁ = 0.16, r′₁ = 6.50, r₂ = r′₂ = 0 for EtMI–β‐pinene. Furthermore, the possible controlled copolymerizations of β‐pinene and N‐substituted maleimides were then attempted via the reversible addition‐fragmentation chain transfer (RAFT) technique. In the presence of RAFT agent 1‐phenylethyl phenyldithioacetate, the copolymerization of β‐pinene with MeMI or EtMI was retarded severely. However, much smaller retardation was observed in the RAFT copolymerization of β‐pinene with PhMI, and, more importantly, the copolymerization exhibited typical features of a controlled system. The solvent effect on the RAFT copolymerization of β‐pinene and PhMI was also investigated using matrix‐assisted laser desorption ionization time‐of‐fight mass spectrometry (MALDI‐TOF‐MS) analysis. The results clearly indicated that copolymerization in tetrahydrofuran suffered from competitive transfer and termination side‐reactions arising from the solvent in spite of the presence of the RAFT agent. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of elastoplastic poly(styrene‐co‐ethylene) using novel mono(η5‐cyclopentadienyl) titanium and modified methylaluminoxane catalysts

Elastoplastic poly(styrene‐co‐ethylene) with high molecular weight was synthesized using novel mono(η⁵‐pentamethylcyclopentadienyl)tribenzyloxy titanium [Cp*Ti(OBz)₃] complex activated with four types of modified methylaluminoxanes (mMAO) containing different amounts of residual trimethylaluminum (TMA). The ideal mMAO, used as a cocatalyst for the copolymerization of styrene with ethylene, contains TMA approaching to 17.8 wt %. The oxidation states of the titanium‐active species in different Cp*Ti(OBz)₃/mMAO catalytic systems were determined by the redox titration method. The results show that both active species may exist in the current system, where one [Ti(IV)] gives a copolymer of styrene and ethylene, and the second one [Ti(III)] only produces syndiotactic polystyrene (sPS). Catalytic activity, compositions of copolymerization products, styrene incorporation, and copolymer microstructure depend on copolymerization conditions, including polymerization temperature, Al/Ti, molar ratio, and comonomers feed ratio. The copolymerization products were fractionated by successive solvent extractions with boiling butanone and tetrahydrofuran (THF). The copolymer, chiefly existing in THF‐soluble fractions, was confirmed by ¹³C‐NMR, GPC, DSC, and WAXD to be an elastoplastic copolymer with a single glass transition temperature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1851–1857, 1999     

Amphiphilic diblock copolymers poly(2‐hydroxyethylmethacrylate)‐b‐(N‐phenylmaleimide) and poly(2‐hydroxyethylmethacrylate)‐b‐(styrene) using the macroinitiator poly(HEMA)‐Cl by ATRP: Preparation,characterization, and thermal properties

In recent years, much attention has been given to the development of specialty polymers from useful materials. In this context, amphiphilic block copolymers were prepared by atom transfer radical polymerization (ATRP) of N‐phenylmaleimide (N‐PhMI) or styrene using a poly(2‐hydroxyethylmethacrylate)‐Cl macroinitiator/CuBr/bipyridine initiating system. The macroinitiator P(HEMA)‐Cl was directly prepared in toluene by reverse ATRP using BPO/FeCl₃ 6 H₂O/PPh₃ as initiating system. The microstructure of the block copolymers were characterized using FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopic techniques and scanning electron microscopy (SEM). The thermal behavior was studied by differential scanning calorimetry (DSC), and thermogravimetry (TG). The theoretical number average molecular weight (M_n,th) was calculated from the feed capacity. The microphotographs of the film's surfaces show that the film's top surfaces were generally smooth. The TDT of the block copolymer P(HEMA)₈₀‐b‐P(N‐PhMI)₂₀ and P(HEMA)₉₀‐b‐P(St)₁₀ of about 290°C was also lower than that found for the macroi′nitiator poly(HEMA)‐Cl. The block copolymers exhibited only one T_g before thermal decomposition, which could be attributed to the low molar content of the N‐PhMI or St blocks respectively. This result also indicates that the phase behavior of the copolymers is predominately determined by the HEMA block. The curves reveal that the polymers show phase transition behavior of amorphous polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The synthesis of poly(3‐hydroxybutyrate)‐g‐poly(methylmethacrylate) brush type graft copolymers by atom transfer radical polymerization method

Brush type of poly (3‐hydroxy butyrate), PHB, copolymer synthesis has been reported. Natural PHB was chlorinated by passing chlorine gas through PHB solution in CHCl₃/CCl₄ mixture (75/25 v/v) to prepare chlorinated PHB, PHB‐Cl, with the chlorine contents varying between 2.18 and 39.8 wt %. Toluene solution of PHB‐Cl was used in the atom transfer radical polymerization (ATRP) of methyl methacrylate, MMA, in the presence of cuprous bromide (CuBr)/2,2′‐bipyridine complex as catalyst, at 90°C. This “grafting from” technique led to obtain poly (3‐hydroxybutyrate)‐g‐poly(methylmethacrylate) (PHB‐g‐PMMA) brush type graft copolymers (cylindrical brush). The polymer brushes were fractionated by fractional precipitation methods and the γ values calculated from the ratio of the volume of nonsolvent to volume of solvent of brushes were ranged between 2.8 and 9.5 depending on the molecular weight, grafting density, and side chain length of the brushes, while the γ values of PHB, PHB‐Cl, and homo‐PMMA were 2.7–3.8, 0.3–2.4, and 3.0–3.9, respectively. The fractionated brushes were characterized by gel permeation chromatography, ¹H‐NMR spectrometry, thermogravimetric analysis (TGA), and differential scanning calorimetry techniques. PHB‐g‐PMMA brush type graft copolymers showed narrower molecular weight distribution (mostly in range between 1.3 and 2.2) than the PHB‐Cl macroinitiator (1.6–3.5). PHB contents in the brushes were calculated from their TGA thermograms and found to be in range between 22 and 42 mol %. The morphologies of PHB‐g‐PMMA brushes were also studied by scanning electron microscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

pH‐responsive poly(ethylene glycol)‐poly(ϵ‐caprolactone)‐poly(glutamic acid) polymersome as an efficient doxorubicin carrier for cancer therapy

The synthesis, characterization and potential application in the doxorubicin (Dox) delivery system of a biodegradable polypeptide‐based block copolymer, poly(ethylene glycol)₂₀₀₀‐poly(?‐caprolactone)₆₀₀₀‐poly(glutamic acid)₁₀₀₀ (PEG₂₀₀₀‐PCL₆₀₀₀‐PGA₁₀₀₀), was investigated. The copolymer was synthesized via ring‐opening polymerization and characterized by ¹H NMR and Fourier transform IR. The synthesized copolymer could self‐assemble into aggregates and the critical aggregation concentration was 0.23 mg mL^?1. Transmission electron microscopy indicated that spherical polymersomes formed with a desirable size about 180 nm. Therefore Dox was encapsulated into these polymersomes, and then we investigated its applications in a drug delivery system. These Dox‐loaded polymersomes (PolyDox) were characterized by dynamic light scattering, zeta potential and pH responsiveness measurements. In vitro drug release indicated that the release rate of drug from PolyDox was pH‐responsive and significantly decreased. The drug pharmacokinetic parameters were improved in comparison to the group treated with free Dox, which proved the prolonged Dox release from PolyDox. A WST‐1 assay indicated a low toxicity and good compatibility of copolymer to cells within 48 h. The results also showed that PolyDox appeared to induce a higher anti‐tumor effect. Cell uptake results indicated that PolyDox displayed higher cellular uptake in A549 cells. Endocytosis inhibition results demonstrated that the internalization of PolyDox was mostly mediated by the fluid‐phase endocytosis pathway. © 2017 Society of Chemical Industry     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Exfoliated poly (styrene‐co‐methylstyrene) grafted‐polyaniline/layered double hydroxide nanocomposite synthesized by solvent blending method

Well defined poly (styrene‐co‐methylstyrene) grafted polyaniline/organo‐modified MgAl layered double hydroxide (LDH) was produced through solution intercalation method. After LDH nanoparticles were modified by the anion exchange reaction of MgAl (Cl) LDH with sodium dodecyl benzene sulfonate, Poly (styrene‐co‐methylstyrene) copolymers were synthesized by “living” free radical polymerization and then brominated with N‐bromosuccinimide. Afterwards, 1,4‐phenylenediamine was linked to brominated copolymers and prepared functionalized copolymer with amine. Poly (St‐co‐MSt)‐g‐PANI, has been synthesized by adding solution of ammonium persulfate and p‐toluenesufonic acid in DMSO solvent. Finally, Poly (styrene‐co‐methylstyrene) grafted‐Polyaniline/LDH nanocomposites were prepared by solution intercalation method. Characterization of these well‐defined nanocomposites included FT‐IR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimeter, transmission electron microscopy, and X‐ray diffraction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation and application of sulfonated poly(1‐octene‐co‐styrene)

In this article, 1‐octene and styrene was copolymerized by the supported catalyst (TiCl₄/ID/MgCl₂). Subsequently, by sulfonation reaction, sulfonated poly(1‐octene‐co‐styrene)s which were amphiphilic copolymers were prepared. The copolymerization behavior between 1‐octene and styrene is moderate ideal behavior. Copolymers prepared by this catalyst contain appreciable amounts of both 1‐octene and styrene. Increase in the feed ratio of styrene/1‐octene leads to increase in styrene content in copolymer and decrease in molecular weight. As the polymerization temperature increases, the styrene content in the copolymers increases, however, the molecular weight decreases. Hydrogen is an efficient regulator to lower the molecular weights of poly(1‐octene‐co‐styrene)s. The sulfonation degree of the sulfonated poly(1‐octene‐co‐styrene)s increased as the styrene content in copolymer increased or the molecular weight decreased. Thirty‐six hour is long enough for sulfonation reaction. The sulfonated poly(1‐octene‐co‐styrene)s can be used as effective and durable modifying agent to improve the wettability of polyethylene film and have potential application in emulsified fuels and for the stabilization of dispersions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of poly(epichlorohydrin‐g‐methyl methacrylate) and poly(epichlorohydrin‐g‐styrene) graft copolymers by a combination of cationic and photopolymerization methods

Poly(epichlorohydrin‐g‐styrene) and poly (epichlorohydrin‐g‐methyl methacrylate) graft copolymers were synthesized by a combination of cationic and photoinitiated free‐radical polymerization. For this purpose, first, epichlorohydrin was polymerized with tetrafluoroboric acid (HBF₄) via a cationic ring‐opening mechanism, and, then, polyepichlorohydrin (PECH) was reacted ethyl‐hydroxymethyl dithio sodium carbamate to obtain a macrophotoinitiator. PECH, possessing photolabile thiuram disulfide groups, was used in the photoinduced polymerization of styrene or methyl methacrylate to yield the graft copolymers. The graft copolymers were characterized by ¹H‐NMR spectroscopy, differential scanning calorimetry, and gel permeation chromatography. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Non‐catalyst synthesis and in vitro drug release property of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) copolymers

A series of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) (PDTC‐b‐mPEG) copolymers were synthesized by the ring‐opening polymerization of 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DTC) in bulk, using methoxy poly(ethylene glycol) (mPEG) as initiator without adding any catalysts. The resulting copolymers were characterized by Fourier transform infrared spectra, ¹H NMR and gel permeation chromatography. The influences of some factors such as the DTC/mPEG molar feed ratio, reaction time and reaction temperature on the copolymerization were investigated. The experimental results showed that mPEG could effectively initiate the ring‐opening polymerization of DTC in the absence of catalyst, and that the copolymerization conditions had a significant effect on the molecular weight of PDTC‐b‐mPEG copolymer. In vitro drug release study demonstrated that the amount of indomethacin released from PDTC‐b‐mPEG copolymer decreased with increase in the DTC content in the copolymer. © 2013 Society of Chemical Industry     

Water‐soluble dual responsive polythiophene‐g‐poly(methoxyethoxy ethyl methacrylate)‐co‐poly(N,N‐diethylamino ethyl methacrylate) for different applications

Polythiophene (PT) based dual responsive water‐soluble graft copolymer (PT‐g‐[poly(methoxyethoxy ethyl methacrylate)‐co‐poly(N,N‐diethylamino ethyl methacrylate)]) (PT‐g‐P(MeO₂MA‐co‐DEAEMA)) (PTDE) has been synthesized by random copolymerization of methoxyethoxy ethyl methacrylate (MeO₂MA) and N,N‐diethylamino ethyl methacrylate (DEAEMA) at 30 °C on the 2,5‐poly(3‐[1‐ethyl‐2‐(2‐ bromoisobutyrate)] thiophene) (PTI) macroinitiator using the Cu based atom transfer radical polymerization technique. The PTDE graft copolymer was characterized by gel permeation chromatography and ¹H NMR techniques and it exhibits thermo‐reversible solubility in water showing a lower critical solution temperature of ca 42 °C in neutral aqueous solution. The PTDE graft copolymer contains a fluorescent PT backbone, and interestingly the system exhibits doubling of fluorescence intensity with rising temperature over the temperature range 41–45 °C at pH 7. The PTDE system therefore acts following the principle of the polymeric AND logic gate and it is also found to be effective in sensing of nitroaromatics, particularly picric acid. The influence of chain hydrophobicity on the logic operation and on the sensing of nitroaromatics is discussed. © 2014 Society of Chemical Industry     

Synthesis of poly[(2‐oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether‐co‐N‐phenylmaleimide] and its miscibility in blends with styrene‐acrylonitrile or poly(vinyl chloride)

The aim of the study was to investigate the synthesis of a copolymer bearing cyclic carbonate and its miscibility with styrene/acrylonitrile copolymer (SAN) or poly(vinyl chloride) (PVC). (2‐Oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether (OVE) as a monomer was synthesized from glycidyl vinyl ether and CO₂ using quaternary ammonium chloride salts as catalysts. The highest reaction rate was observed when tetraoctylammonium chloride (TOAC) was used as a catalyst. Even at the atmospheric pressure of CO₂, the yield of OVE using TOAC was above 80% after 6 h of reaction at 80°C. The copolymer of OVE and N‐phenylmaleimide (NPM) was prepared by radical copolymerization and was characterized by FTIR and ¹H‐NMR spectroscopies and differential scanning calorimetry (DSC). The monomer reactivity ratios were given as r₁ (OVE) = 0.53–0.57 and r₂ (NPM) = 2.23–2.24 in the copolymerization of OVE and NPM. The films of poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were cast from N‐dimethylformamide. An optical clarity test and DSC analysis showed that poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were both miscible over the whole composition range. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1809–1815, 2000     

Synthesis of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) and poly(vinyl alcohol)‐graft‐poly(lactide) in melt with magnesium hydride as catalyst

Grafting of poly(ε‐caprolactone) (PCL) and poly(lactide) (PLA) chains on poly(vinyl alcohol) backbone (PVA degree of hydrolysis 99%) was investigated using MgH₂ environmental catalyst and melt‐grown ring‐opening polymerization (ROP) of ε‐caprolactone (CL) and L ‐lactide (LA), that avoiding undesirable toxic catalyst and solvent. The ability of MgH₂ as catalyst as well as yield of reaction were discussed according to various PVA/CL/MgH₂ and PVA/LA/MgH₂ ratio. PVA‐g‐PCL and PVA‐g‐PLA were characterized by ¹H‐ and ¹³C‐NMR, DSC, SEC, IR. For graft copolymers easily soluble in tetrahydrofuran (THF) or chloroform, wettability and surface energy of cast film varied in relation with the length and number of hydrophobic chains. Aqueous solution of micelle‐like particles was realized by dissolution in THF then addition of water. Critical micelle concentration (CMC) decreased with hydrophobic chains. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Amphiphilic block copolymer poly(lactic acid)‐block‐(glycidylazide polymer)‐block‐polystyrene: synthesis and self‐assembly

The triblock energetic copolymer poly(lactic acid)‐block‐(glycidylazide polymer)‐block‐polystyrene (PLA‐b‐GAP‐b‐PS) was synthesized successfully through atom‐transfer radical polymerization (ATRP) of styrene and ring‐opening polymerization of d,l ‐lactide. The energetic macroinitiator GAP‐Br, which was made from reacting equimolar GAP with α‐bromoisobutyryl bromide, firstly triggered the ATRP of styrene with its bromide group, and then the hydroxyl group on the GAP end of the resulting diblock copolymer participated in the polymerization of lactide in the presence of stannous octoate. The triblock copolymer PLA‐b‐GAP‐b‐PS had a narrow distribution of molecular weight. In the copolymer, the PS block was solvophilic in toluene and improved the stability of the structure, the PLA block was solvophobic in toluene and served as the sacrificial component for the preparation of porous materials, and GAP was the basic and energetic material. The three blocks of the copolymer were fundamentally thermodynamically immiscible, which led to the self‐assembly of the block copolymer in solution. Further studies showed that the concentration and solubility of the copolymer and the polarity of the solvent affected the morphology and size of the micelles generated from the self‐assembly of PLA‐b‐GAP‐b‐PS. The micelles generated in organic solvents at 10 mg mL^?1 copolymer concentration were spherical but became irregular when water was used as a co‐solvent. The spherical micelles self‐assembled in toluene had three distinct layers, with the diameter of the micelles increasing from 60 to 250 nm as the concentration of the copolymer increased from 5 to 15 mg L^?1. © 2017 Society of Chemical Industry     

Influence of isomer ratio and ring substituents in decomposition activation energies of α,α,α′,α′‐tetrasubstituted dibenzyls

Diethyl‐2,3‐dicyano‐2,3‐di‐(X‐substituted phenyl) succinates (X = p‐OCH₃, p‐CH₃, p‐Cl, H, p‐NO₂) can initiate the free‐radical polymerization of styrene. The decomposition rate constant and activation energy were measured by means of a dilatometer, and the results showed that they were strongly dependent on the ratio of meso‐ and dl‐isomers in the polysubstituted dibenzyl compounds and the properties of the ring substituents. On the other hand, it was found that the polystyrenes, which were obtained by initiation with hydrogen, had a much larger average molecular weight than that with p‐OCH₃ and p‐CH₃. The experimental phenomena were correlated with the structure of the radical resulting from hydrogen. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2964–2971, 2001     

Preparation and applicability of functionalized polyethylene with an ethylene/1,7‐octadiene copolymer

The copolymerization of ethylene and 1,7‐octadiene was carried out to synthesize polyethylene with unreacted vinyl groups. The prepared copolymer [poly (ethylene‐co‐1,7‐octadiene) (PEOD)] was epoxidized with peracetic acid, m‐chloroperbenzoic acid, or formic acid/H₂O₂. Of these, peracetic acid gave the best results. Epoxidized PEOD was subjected to a reaction with 2‐mercaptobenzimidazole and poly(L ‐lactic acid). The bromination of PEOD was also performed in the presence of a Br₂/HBr solution at room temperature. The brominated poly(ethylene‐co‐1,7‐octadiene) (PEOD‐Br) was used as a macroinitiator for atom transfer radical polymerization. The polymerization of styrene, butyl methacrylate, and glycidyl methacrylate was performed in bulk or solution at 120°C with a PEOD‐Br/CuBr/2,2′‐dipyridyl initiator system. The thermal properties of the graft copolymers and the efficiency of the graft polymerization were investigated. These graft copolymers have potential applications as interfacial modifiers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Unsymmetrical α‐diimine nickel (II) complex with rigid bicyclic ring ligand: Synthesis,characterization, and ethylene polymerization in the presence of AlEt2Cl

Unsymmetrical α‐diimine ligand 1 was successfully synthesized via condensation of trimethylaluminum (TMA) metalated 2‐methyl‐6‐isopropyl‐aniline with rigid bicyclic aliphatic diketone camphorquinone. Syn‐ and anti‐stereoisomers were detected by ¹³C NMR in the condensation product. The corresponding α‐diimine nickel (II) complex 1 was prepared from the exchange reaction of (DME)NiBr₂ with the ligand 1 , and displayed high activity for ethylene polymerization in the presence of diethylaluminum chloride (AlEt₂Cl). The resultant polymers were confirmed by gel permeation chromatography and ¹³C NMR characterization to be broad molecular weight distribution polyethylene with various branches, and high degree of branching, even at low polymerization temperature ?10°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008