Affinity microspheres and their application to lysozyme adsorption: Cibacron Blue F3GA and Cu(II) with poly(HEMA-EGDMA)

Lysozyme adsorption onto Cibacron Blue F3GA attached and Cu(II) incorporated poly(2-hydroxyethyl methacrylate–ethylene glycol dimethacrylate) [poly(HEMA-EGDMA)] microspheres was investigated. The microspheres were prepared by suspension polymerization. Various amounts of Cibacron Blue F3GA were attached covalently onto the microspheres by changing the initial concentration of dye in the reaction medium. The microspheres with a swelling ratio of 65%, and carrying different amounts of dye (between 1.4 and 22.5 µmol/g⁻¹) were used in the lysozyme adsorption studies. Lysozyme adsorption on these microspheres from aqueous solutions containing different amounts of lysozyme at different pH values was investigated in batch reactors. The lysozyme adsorption capacity of the dye–metal chelated microspheres (238.2 mg g⁻¹) was greater than that of the dye-attached microspheres (175.1 mg g⁻¹). The maximum lyzozyme adsorption capacities (q_m) and the dissociation constant (k_d) values were found to be 204.9 mg g⁻¹ and 0.0715 mg ml⁻¹ with dye-attached and 270.7 mg g⁻¹ and 0.0583 mg ml⁻¹ with dye–metal chelated microspheres, respectively. More than 90% of the adsorbed lysozyme were desorbed in 60 min in the desorption medium containing 0.5 M KSCN at pH 8.0 or 25 mM EDTA at pH 4.9. © 1999 Society of Chemical Industry     

New metal chelate sorbent for albumin adsorption: Cibacron Blue F3GA-Zn(II) attached microporous poly(HEMA) membranes

Poly(2-hydroxyethyl methacrylate) [poly(HEMA)] membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azobis-isobutyronitrile, AIBN). The triazine dye Cibacron Blue F3GA was attached as an affinity ligand to poly(HEMA) membranes, covalently. These affinity membranes with a swelling ratio of 58% and containing 10.7 mmol Cibacron Blue F3GA/m² were used in the albumin adsorption studies. After dye-attachment, Zn(II) ions were chelated within the membranes via attached-dye molecules. Different amounts of Zn(II) ions [650–1440 mg Zn(II)/m²] were loaded on the membranes by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these membranes from aqueous solutions containing different amounts of BSA at different pH was investigated in batch reactors. The nonspecific adsorption of BSA on the poly(HEMA) membranes was negligible. Cibacron Blue F3GA attachment significantly increased the BSA adsorption up to 92.1 mg BSA/m². Adsorption capacity was further increased when Zn(II) ions were attached (up to 144.8 mg BSA m²). More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 0.5M NaSCN at pH 8.0 and 0.025M EDTA at pH 4.9. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 657–664, 1998     

Cibacron Blue F3GA‐attached magnetic poly(2‐hydroxyethyl methacrylate) beads for human serum albumin adsorption

An affinity dye ligand, Cibacron Blue F3GA, was covalently attached onto magnetic poly(2‐hydroxyethyl methacrylate) (mPHEMA) beads for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. The mPHEMA beads, in the size range of 80 to 120 µm, were prepared by a modified suspension technique. Cibacron Blue F3GA molecules were incorporated on to the mPHEMA beads. The maximum amount of Cibacron Blue F3GA attachment was obtained as 68.3 µmol g^?1. HSA adsorption onto unmodified and Cibacron Blue F3GA‐attached mPHEMA beads was investigated batchwise. The non‐specific adsorption of HSA was very low (1.8 mg g^?1). Cibacron Blue F3GA attachment onto the beads significantly increased the HSA adsorption (94.5 mg g^?1). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (138.3 mg HSA g^?1). Desorption of HSA from Cibacron Blue F3GA‐attached mPHEMA beads was obtained by using 0.1 M Tris/HCl buffer containing 0.5 M NaSCN. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to re‐use Cibacron Blue F3GA‐attached mPHEMA beads without any significant decreases in their adsorption capacities. Copyright © 2004 Society of Chemical Industry     

Metal chelating properties of Cibacron Blue F3GA‐derived poly(EGDMA‐HEMA) microbeads

Metal chelating properties of Cibacron Blue F3GA‐derived poly(EGDMA‐HEMA) microbeads have been studied. Poly(EGDMA‐HEMA) microbeads were prepared by suspension copolymerization of ethylene glycol dimethacrylate (EGDMA) and hydroxy‐ethyl methacrylate (HEMA) by using poly(vinyl alcohol), benzoyl peroxide, and toluene as the stabilizer, the initiator, and the pore‐former, respectively. Cibacron Blue F3GA was covalently attached to the microbeads via the nucleophilic substitution reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA, under alkaline conditions. Microbeads (150–200 μm in diameter) with a swelling ratio of 55%, and carrying 16.5 μmol Cibacron Blue F3GA/g polymer were used in the adsorption/desorption studies. Adsorption capacity of the microbeads for the selected metal ions, i.e., Cu(II), Zn(II), Cd(II), Fe(III), and Pb(II) were investigated in aqueous media containing different amounts of these ions (5–200 ppm) and at different pH values (2.0–7.0). The maximum adsorptions of metal ions onto the Cibacron Blue F3GA‐derived microbeads were 0.19 mmol/g for Cu(II), 0.34 mmol/g for Zn(II), 0.40 mmol/g for Cd(II), 0.91 mmol/g for Fe(III), and 1.05 mmol/g for Pb(II). Desorption of metal ions were studied by using 0.1 M HNO₃. High desorption ratios (up to 97%) were observed in all cases. Repeated adsorption/desorption operations showed the feasibility of repeated use of this novel sorbent system. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1397–1403, 1999     

Dye Attached Nanoparticles for Lysozyme Adsorption

In this work, Reactive Blue 15 dye functionalized poly(HEMA) nanoparticles were synthesized for reversible adsorption of lysozyme from its aqueous solution. For this, nano-sized poly(HEMA) nanoparticles were synthesized by the surfactant free emulsion polymerization. Reactive Blue 15 dye then covalently attached to the polymeric structure. These novel dye attached poly(HEMA) nanoparticles were used for the adsorption of lysozyme. Characterization of dye attached nanoparticles was carried out by using FTIR, AFM, and elemental analysis. Incorporation of the dye onto the polymeric structure was demonstrated by FTIR and elemental analysis, while the size and the shape of the nanoparticles were shown by AFM. The incorporated amount of the dye was found to be 70.3 μmol/g nanoparticle with sulphur stoichiometry and it was found that the prepared nanoparticles were in a spherical form and were about 100 nm diameter. Lysozyme adsorption studies were carried out with different conditions (pH, lysozyme concentration, temperature, and ionic strength) and maximum lysozyme adsorption was found to be 630.7 mg/g nanoparticle at pH 7.0 in 25°C medium temperature. Adsorbed lysozyme was desorbed by 1.0 M of NaCl with 96% recovery and synthesized dye-attached nanoparticles were used 10 times without any decrease in their adsorption capacity.     

Dye‐ligand column chromatography: Albumin adsorption from aqueous media and human plasma with dye‐affinity microbeads

Cibacron Blue F3GA was covalently coupled with poly(ethylene glycol‐dimethacrylate‐2‐hydroxyethylmethacrylate) [poly(EGDMA‐HEMA)] microbeads via the nucleophilic substitution reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA molecules under alkaline conditions. The affinity sorbent carrying 16.5 μmol Cibacron Blue F3GA/g polymer was then used for bovine serum albumin (BSA) adsorption from aqueous protein solutions and from human plasma in a packed‐bed column. The BSA adsorption capacity of the microbeads decreased with an increase in the recirculation rate. High adsorption rates were observed at the beginning, then equilibrium was gradually achieved in about 60 min. The BSA concentration in the mobile phase was also effective on adsorption. BSA adsorption was first increased with BSA concentration, then reached a plateau that was about 57.3 mg BSA/g. Higher BSA adsorption was observed at lower ionic strength. The maximum adsorption was observed at pH 5.0, which is the isoelectric pH of BSA. Higher human serum albumin adsorption was achieved from human plasma (109.6 mg HSA/g). High desorption ratios (over 94% of the adsorbed albumin) were achieved by using 1.0M NaSCN (pH 8.0) in 30 min. It was observed that albumin could be repeatedly adsorbed and desorbed without a significant loss in adsorption capacity. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2803–2810, 1999     

Albumin adsorption from aqueous solutions and human plasma in a packed-bed column with Cibacron Blue F3GA-Zn(II) attached poly(EGDMA-HEMA) microbeads

Affinity dye-ligand Cibacron Blue F3GA, was covalently coupled with poly(EGDMA-HEMA) microbeads via nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA under alkaline conditions. The microbeads carrying 16.5 μmol Cibacron Blue F3GA per gram polymer was incorporated with Zn(II) ions. Zn(II) loading was 189.6 μmol/g. Cibacron Blue F3GA-Zn(II) attached affinity sorbent was used for albumin adsorption from aqueous solutions and human plasma in a packed-bed column. BSA adsorption capacity of the microbeads decreased with an increase in the recirculation rate. High adsorption rates were observed at the beginning, then equilibrium was gradually achieved in about 60 min. The BSA concentration in the mobile phase also effected adsorption. BSA adsorption was first increased with BSA concentration, then reached a plateau which was about 128 mg BSA/g. The maximum adsorption was observed at pH 5.0 which is the isoelectric pH of BSA. Higher human serum albumin adsorption was observed from human plasma (215 mg HSA/g). High desorption ratios (over 90% of the adsorbed albumin) were achieved by using 1.0 M NaSCN (pH 8.0) in 30 min.     

Preparation of cibacron blue F3GA‐attached polyamide hollow fibers for heavy metal removal

Dye‐affinity adsorption has been used increasingly for heavy metal removal. Synthetic hollow fibers have advantages as support matrices in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The goal of this study was to investigate in detail the performance of hollow fibers composed of modified polyamide to which Cibacron Blue F3GA was attached for the removal of heavy metal ions. The Cibacron Blue F3GA loading was 1.2 mmol/g. The internal matrix was characterized by scanning electron microscopy. No significant changes in the hollow fiber cross‐section or outer layer morphology were observed after dye modification. The effect of the initial concentration of heavy metal ions and medium pH on the adsorption efficiency were studied in a batch reactor. The adsorption capacity of the hollow fibers for the selected metal ions [i.e., Cu(II), Zn(II) and Ni(II)] were investigated in aqueous media with different amounts of these ions (10–400 ppm) and at different pH values (3.0–7.0). The maximum adsorptions of metal ions onto the Cibacron Blue F3GA‐attached hollow fibers were 246.2 mg/g for Cu(II), 133.6 mg/g for Zn(II), and 332.7 mg/g for Ni(II). Furthermore, a Langmuir expression was calculated to extend the adsorption equilibrium. Nitric acid (0.1M) was chosen as the desorption solution. High desorption ratios (up to 97%) were observed in all cases. Consecutive adsorption/desorption operations showed the feasibility of repeated use of this novel sorbent system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3089–3098, 2002; DOI 10.1002/app.2338     

Poly(acrylamide‐allyl glycidyl ether) cryogel as a novel stationary phase in dye‐affinity chromatography

Poly(acrylamide‐allyl glycidyl ether) [poly(AAm‐AGE)] cryogel was prepared by bulk polymerization which proceeds in an aqueous solution of monomers frozen inside a glass column (cryo‐polymerization). After thawing, the monolithic cryogel contains a continuous polymeric matrix having interconnected pores of 10–100 μm size. Cibacron Blue F3GA was immobilized by covalent binding onto poly(AAm‐AGE) cryogel via epoxy groups. Poly(AAm‐AGE) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(AAm‐AGE) monolithic cryogel was 6.84 g H₂O/g cryogel. Poly(AAm‐AGE) cryogel containing 68.9 μmol Cibacron Blue F3GA/g was used in the adsorption/desorption of human serum albumin (HSA) from aqueous solutions and human plasma. The nonspecific adsorption of HSA was very low (0.2 mg/g). The maximum amount of HSA adsorption from aqueous solution in acetate buffer was 27 mg/g at pH 5.0. Higher HSA adsorption value was obtained from human plasma (up to 74.2 mg/g). Desorption of HSA with a purity of 92% from Cibacron Blue F3GA attached poly(AAm‐AGE) cryogel was achieved using 0.1M Tris/HCl buffer containing 0.5M NaCl. It was observed that HSA could be repeatedly adsorbed and desorbed with poly(AAm‐AGE) cryogel without significant loss in the adsorption capacity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Human serum albumin (HSA) adsorption with chitosan microspheres

In this study, chitosan microspheres were prepared and characterized for adsorption of human serum albumin (HSA) as affinity sorbent. The chitosan microspheres were obtained with a “suspension crosslinking technique” in the size range of 30–700 μm by using a crosslinker, i.e., glutaraldehyde. The chitosan microspheres used in HSA adsorption studies were having the average size of 170 ± 81 μm. Adsorption medium pH and the initial HSA concentration in the adsorption medium were changed as 4.0–7.0 and 0.5–2.0 mg HSA/mL, respectively, to investigate the HSA adsorption capacity of chitosan microspheres. Maximum HSA adsorption (i.e., 11.35 mg HSA/g chitosan microspheres) was obtained at pH 5.0 and 1.5 mg HSA/mL of the initial HSA concentration in the adsorption medium was obtained as the saturation value for HSA adsorption. A very common dye ligand, i.e., Cibacron Blue F3GA was attached to the chitosan microspheres to increase the HSA adsorption capacity. Actually, the HSA adsorption capacity was increased up to 15.35 mg HSA/g chitosan microspheres in the case of Cibacron Blue F3GA attached to chitosan microspheres used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3035–3039, 2002     

Metal‐chelated polyamide hollow fibers for human serum albumin separation

We modified microporous polyamide hollow fibers by acid hydrolysis to amplify the reactive groups and subsequent binding of Cibacron Blue F3GA. Then, we loaded the Cibacron Blue F3GA‐attached hollow fibers with different metal ions (Cu²⁺, Ni²⁺, and Co²⁺) to form the metal chelates. We characterized the hollow fibers by scanning electron microscopy. The effect of pH and initial concentration of human serum albumin (HSA) on the adsorption of HSA to the metal‐chelated hollow fibers were examined in a batch system. Dye‐ and metal‐chelated hollow fibers had a higher HSA adsorption capacity and showed less nonspecific protein adsorption. The nonspecific adsorption of HSA onto the polyamide hollow fibers was 6.0 mg/g. Cibacron Blue F3GA immobilization onto the hollow fibers increased HSA adsorption up to 147 mg/g. Metal‐chelated hollow fibers showed further increases in the adsorption capacity. The maximum adsorption capacities of Co²⁺‐, Cu²⁺‐, and Ni²⁺‐chelated hollow fibers were 195, 226, and 289 mg/g, respectively. The recognition range of metal ions for HSA from human serum followed the order: Ni(II) > Cu(II) > Co(II). A higher HSA adsorption was observed from human serum (324 mg/g). A significant amount of the adsorbed HSA (up to 99%) was eluted for 1 h in the elution medium containing 1.0M sodium thiocyanide (NaSCN) at pH 8.0 and 25 mM ethylenediaminetetraacetic acid at pH 4.9. Repeated adsorption–desorption processes showed that these metal‐chelated polyamide hollow fibers were suitable for HSA adsorption. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3346–3354, 2002     

Spectral characterization of lysozyme adsorption on dye-affinity beads

Cibacron Blue F3GA-attached magnetic poly(2-hydroxyethyl methacrylate) [mPHEMA] beads were prepared by suspension polymerization of HEMA in the presence of magnetite (Fe₃O₄) nanopowder. Average diameter size of the mPHEMA beads was 150–200 μm. The characteristic functional groups of Cibacron Blue F3GA-attached mPHEMA beads were analyzed by Fourier transform infrared spectrometer (FTIR) and Raman scattering spectrometer. The lysozyme adsorption and desorption characteristics of Cibacron Blue F3GA-attached mPHEMA beads were also investigated using FTIR and Raman spectroscopic techniques. When the Raman spectrum of lysozyme adsorbed mPHEMA is evaluated characteristic Amide-I band appears at 1657 cm⁻¹. The intensity of this band decreases in the spectrum of lysozyme desorbed mPHEMA sample. When the characteristic bands of lysozyme adsorbed and desorbed mPHEMA samples are compared, the band intensities of desorbed sample are lower than those of lysozyme adsorbed sample except for the band appearing at 656 cm⁻¹ (Tyr vC S). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Comparison of metal chelate affinity sorption of BSA onto Dye/Zn (II)-derived poly(ethylene glycol dimethacrylate-hydroxyethyl methacrylate) microbeads

Poly(ethylene glycol dimethacrylate-hydroxyethyl methacrylate) [poly-(EGDMA-HEMA)]microbeads in the size range of 150–200 μm were produced by a modified suspension copolymerization of EGDMA and HEMA. The dyes (Congo red, Cibacron blue F3GA, and alkali blue 6B) were covalently immobilized; then, Zn(II) ions were incorporated within the microbeads by chelation with the dye molecules. The maximum amounts of dye loadings were 14.5 μmol/g, 16.5 μmol/g, and 23.7 μmol/g for Congo red, Cibacron blue F3GA, and alkali blue 6B, respectively. Different amounts of Zn(II) ions(2.9–53.8 mg/g polymer) were incorporated on the microbeads by changing the initial concentration of Zn(II) ions and the pH of the medium. Bovine serum albumin (BSA) adsorption onto dye/Zn(II)-derived microbeads containing Congo red, Cibacron blue F3GA, and alkali blue 6B was investigated. The maximum BSA adsorptions onto the dye/Zn(II)-derived microbeads from aqueous solutions containing different amounts of BSA were 159 mg/g, 122 mg/g, and 93 mg/g for the Congo red, Cibacron blue F3GA, and alkali blue 6B dyes, respectively. The maximum BSA adsorptions were observed at pH 6.0 in all cases. Desorption of BSA molecules was achieved by using 0.025M EDTA (pH 4.9). High desorption ratios (more than 93% of the adsorbed BSA) were observed in all cases. It was possible to reuse these novel metal chelate sorbents without significant losses in their adsorption capacities. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2085–2093, 1997     

Affinity adsorption of recombinant human interferon‐α on monosize dye‐affinity beads

Monosize, nonporous poly(glycidyl methacrylate) [poly(GMA)] beads were prepared by dispersion polymerization. Cibacron Blue F3GA was covalently attached onto the poly(GMA) beads for adsorption of recombinant interferon‐α (rHuIFN‐α). Monosize poly(GMA) beads were characterized by scanning electron microscopy. Dye‐carrying beads (1.73 mmol/g) were used in the adsorption–elution studies. The effect of initial concentration of rHuIFN‐α, pH, ionic strength, and temperature on the adsorption efficiency was studied in a batch system. Nonspecific adsorption of rHuIFN‐α on the beads was 0.78 mg/g. Dye attachment significantly increased the rHuIFN‐α adsorption up to 181.7 mg/g. Equilibrium adsorption of rHuIFN‐α onto the dye‐carrying beads increased with increasing temperature. Negative change in free energy (ΔG⁰ < 0) indicated that the adsorption was a thermodynamically favorable process. ΔS and ΔH values were 146.1 J/mol K and ?37.39 kJ/mol, respectively. Significant amount of the adsorbed rHuIFN‐α (up to 97.2%) was eluted in the elution medium containing 1.0M NaCl in 1 h. To determine the effects of adsorption conditions on possible conformational changes of rHuIFN‐α structure, fluorescence spectrophotometry was employed. We concluded that dye‐affinity beads can be applied for rHuIFN‐α adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these beads are suitable for rHuIFN‐α adsorption. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 975–981, 2007     

Preparation of Zn2+‐chelated poly(HEMA‐MAH) cryogel for affinity purification of chicken egg lysozyme

Supermacroporous poly(2‐hydroxyethyl methacrylate) [poly(HEMA)]‐based monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with N‐methacryloyl‐L ‐histidine methyl ester (MAH) as functional comonomer and N,N′‐methylene‐bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for affinity purification of lysozyme from chicken egg white. The monolithic cryogel containing a continuous polymeric matrix having interconnected pores of 10–50 μm size was loaded with Zn²⁺ ions to form the metal chelate with poly(HEMA‐MAH) cryogel. Poly(HEMA‐MAH) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA‐MAH) monolithic cryogel was 5.62 g H₂O/g cryogel. Poly(HEMA‐MAH) cryogel containing 45.8 μmol MAH/g was used in the adsorption/desorption of lysozyme from aqueous solutions. The nonspecific adsorption of lysozyme was very low (7.5 mg/g). The maximum amount of lysozyme adsorption from aqueous solution in phosphate buffer was 209 mg/g at pH 7.0. It was observed that lysozyme could be repeatedly adsorbed and desorbed with the poly(HEMA‐MAH) cyogel without significant loss of adsorption capacity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Congo red- and Zn(II)-derivatized monosize poly(MMA-HEMA) microspheres as specific sorbent in metal chelate affinity of albumin

Monosize poly(methylmethacrylate-hydroxyethylmethacrylate) [poly(MMA-HEMA)] microspheres (4 μm in diameter) were produced by dispersion copolymerization of MMA and HEMA in an ethanol-water medium. Congo Red was attached to the poly(MMA-HEMA) microspheres, covalently. These Congo Red-derivatized microspheres were characterized by optical microscopy, Fourier transform infrared spectroscopy, and elemental analysis. Then, Zn(II) ions were incorporated by chelating with the immobilized Congo Red molecules. Different amounts of Zn(II) ions [1.2–17.6 mg of Zn(II)/g of polymer] were conjugated on the microspheres by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these microspheres from aqueous solutions containing different amounts of BSA at different pH and ionic strengths was investigated in batch reactors. The nonspecific BSA adsorption on the plain poly(MMA-HEMA) microspheres was very low (0.7 mg of BSA/g of polymer). Congo Red derivatization significantly increased the BSA adsorption (up to 35.8 mg of BSA/g of polymer). A further increase in the adsorption capacity (up to 61.0 mg of BSA/g of polymer) was observed when Zn(II) ions were incorporated. More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0. © 1997 John Wiley & Sons, Inc.     

Packed-bed columns with dye-affinity microbeads for removal of heavy metal ions from aquatic systems

A dye ligand Cibacron Blue F3GA, was covalently coupled with polyhydroxyethylmethacrylate (PHEMA) microbeads in the 150–200 μm particle size range. The sorbent carrying 22.3 μmol Cibacron Blue F3GA per gram of polymer was then used to remove Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions in a packed-bed column system. Heavy metal ion adsorption capacity of the column was investigated as a function of heavy metal ion-bearing solution flow rate and the inlet heavy metal ion concentration. The maximum metal ion uptake values found were: 80.60, 96.98, 78.36, 103.98 μmol/g polymer for Pb(II), Cd(II), Cu(II) and Zn(II), respectively. The heavy metal adsorption capacity of the microbeads decreased with an increase in the circulation rate of aqueous solution. The order of affinity based on molar uptake was Zn(II)>Cd(II)>Pb(II)>Cu(II). Removal percentages of heavy metals related to flow time were determined for different flow rates and initial metal ion concentrations. It was observed that PHEMA microbeads carrying Cibacron Blue F3GA can be regenerated by washing with a solution of nitric acid (0.05 M). The desorption ratio was as high as 98.5%.     

In vitro cadmium removal from human serum by Cibacron Blue F3GA–thionein‐complex conjugated affinity membranes

A new membrane affinity biosorbent carrying thionein has been developed for selective removal of cadmium ions from human serum. Microporous poly(2‐hydroxyethyl methacrylate) (pHEMA) membranes were prepared by photopolymerization of HEMA. The pseudo dye ligand Cibacron Blue F3GA (CB) was covalently immobilized on the pHEMA membranes. Then, the cysteine‐rich metallopeptide thionein was conjugated onto the CB‐immobilized membrane. The maximum amounts of CB immobilized and thionein conjugated on the membranes were 1.07 µmol cm⁻² and 0.92 µmol cm⁻², respectively. The hydrophilic pHEMA membrane had a swelling ratio of 58% (w/w) with a contact angle of 45.8 °. CB‐immobilized and CB‐immobilized–thionein‐conjugated membranes were used in the Cd(II) removal studies. Cd(II) ion adsorption appeared to reach equilibrium within 30 min and to follow a typical Langmuir adsorption isotherm. The maximum capacity (q _m) of the CB‐immobilized membranes was 0.203 (µmol Cd(II)) cm⁻² membrane and increased to 1.48 (µmol Cd(II)) cm⁻² upon CB–thionein‐complex conjugation. The pHEMA membranes retained their cadmium adsorption capacity even after 10 cycles of repeated use. © 2000 Society of Chemical Industry     

Polyethylenimine‐grafted and HSA‐immobilized poly(GMA–MMA) affinity adsorbents for bilirubin removal

The epoxy‐group‐containing microspheres from cross‐linked glycidyl methacrylate and methyl methacrylate, poly(GMA–MMA), were prepared by suspension polymerisation. The epoxy groups of the poly(GMA–MMA) microspheres were used for grafting with an anionic polymer polyethylenimine (PEI) to prepare non‐specific affinity adsorbents (poly(GMA–MMA)–PEI) for bilirubin removal. The specificity of the poly(GMA–MMA)–PEI adsorbent to bilirubin was further increased by immobilization of human serum albumin (HSA) via adsorption onto PEI‐grafted poly(GMA–MMA) adsorbent. Various amounts of HSA were immobilized on the poly(GMA–MMA)–PEI adsorbent by changing the medium pH and initial HSA concentration. The maximum HSA content was obtained at 68.3 mg g^?1 microspheres. The effects of pH, ionic strength, temperature and initial bilirubin concentration on the adsorption capacity of both adsorbents were investigated in a batch system. Separation of bilirubin from human serum was also investigated in a continuous‐flow system. The bilirubin adsorption on the poly(GMA–MMA)–PEI and poly(GMA–MMA)–PEI–HSA was not well described by the Langmuir model, but obeyed the Freundlich isotherm model. The poly(GMA–MMA)–PEI affinity microspheres are stable when subjected to sanitization with sodium hydroxide after repeated adsorption–desorption cycles. Copyright © 2004 Society of Chemical Industry     

Synthesis of Cibacron Blue F3GA‐coupled magnetic PMMA nanospheres and their use for protein affinity separation

BACKGROUND: New magnetic carrier separation technologies, capable of treating dilute solutions in large‐scale processes, even in the presence of biological debris, are necessary for the future development of biotechnology. Non‐porous magnetic carriers are more resistant to fouling, show better mass transfer and have lower non‐specific adsorption than porous carriers. Nanosized magnetic carriers have a surface area comparable to that of typical macroporous resins, and therefore their application has advantages. RESULTS: Magnetic poly(methyl methacrylate) (PMMA) nanospheres with an average diameter of 76 nm and narrow size distribution were prepared by a facile mini‐emulsion polymerization. After surface modification with poly(ethylene glycol), Cibacron Blue F3GA (CB) was coupled to the magnetic PMMA nanospheres to form dye ligand‐attached magnetic adsorbents for bovine serum albumin (BSA) adsorption. The CB‐coupled magnetic PMMA nanospheres showed very high adsorption capacity (121.98 mg g^?1) and little non‐specific adsorption for BSA. The adsorbed protein could be easily desorbed using high ionic strength solution. CONCLUSION: The CB‐coupled magnetic PMMA nanospheres showed a high BSA adsorption capacity, low non‐specific adsorption and fast adsorption kinetics in comparison with other dye‐affinity adsorbents. These characteristics indicate that these magnetic PMMA nanospheres have great potential for protein affinity separation and purification. Copyright © 2009 Society of Chemical Industry