共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
刘娜 《仪器仪表标准化与计量》2005,(6):33-34,39
射频卡以射频技术为核心,以单片机为控制器的射频卡水表具有实用、方便、快捷、可靠性高的特点,有广泛的应用前景。本文介绍了射频卡的工作原理及用单片机设计的射频卡水表,给出了射频卡水表的硬件电路和读写卡程序流程图。 相似文献
3.
介绍了一种基于射频卡读写模块AT_RFMOD09的新型射频卡读写器,详细介绍了该读写模块的接口原理及程序设计过程.该读写模块内部完全集成射频电路和高性能的MCU芯片,弥补了传统射频卡电路上的不足.通过本文的研究,为以后射频卡读写器的研制提供了新的思路. 相似文献
4.
基于MF-RC500的通用射频卡读写模块的设计 总被引:9,自引:0,他引:9
介绍基于MF—RC500芯片的通用射频卡读/写模块的设计和实现。该读/写模块具有和应用系统的多种通信接口方式,包括二线制通信模式;模块设计有用户高级读写指令,极大地简化了应用系统对射频卡的操作;应用系统和模块的通信基于二次握手的通信协议,保证了通信的稳定和可靠。 相似文献
5.
电子汽车衡是广泛应用于煤炭、冶金、化工等行业大宗物质称重的计量设备,本文针对在煤炭销售称重计量中利用电子遥控装置作弊的现象,着重介绍了电子汽车衡在称重计量中的作弊原理、方法以及针对作弊方法应采取的防作弊的有效措施. 相似文献
6.
电子汽车衡是广泛应用于煤炭、冶金、化工等行业大宗物质称重的计量设备,本文针对在煤炭销售称重计量中利用电子遥控装置作弊的现象,着重介绍了电子汽车衡在称重计量中的作弊原理、方法以及针对作弊方法应采取的防作弊的有效措施. 相似文献
7.
设计了基于RFID(Radio Frequency Identification)技术的打卡器及射频卡。RFID是一种非接触的自动识别技术,其基本原理是利用射频信号和空间耦合(电感或电磁耦合)或雷达反射的传输特性,实现对被识别物体的自动识别。打卡器基于MF-RC500射频卡读写系统,以STC89C52RC单片机为核心,辅以必要的外围电路,使打卡器能识别射频卡,并对射频卡输出的信号进行采集和输出。该设计的主要创新点是采用STC89C52RC单片机控制,系统稳定性高,价格低廉,编程简单,功耗较低。 相似文献
8.
为了提高电动汽车充电桩的兼容性,设计了一套用于电动汽车充电桩的充电管理系统.基于STM32的电动汽车充电桩充电管理系统具有射频卡数据读写、电表数据读写、数据信息存储、PWM波输出和捕获、键盘输入等功能,系统提供了良好的人机界面,能够对充电过程中的相关信息进行获取和管理. 相似文献
9.
10.
煤炭作为一种非常重要的能源,其交易需要精准计量。煤炭企业也面临如何提高计量效率和管理效率的挑战,传统的汽车衡过磅人工操作方式往往存在着耗时严重、容易出错等问题,然而采用无人值守称重系统,就可以很好地解决这些问题。无人值守称重系统应用于煤炭企业,能够有效提高称重效率,杜绝作弊行为,同时能够降低人力成本,这正是越来越多煤炭企业选择升级无人值守称重系统的原因。本文将以华能煤业旗下某煤化工公司汽车衡升级无人值守系统为例,探讨煤炭企业汽车衡升级无人值守称重系统的应用。 相似文献
11.
12.
详细阐述了ABB变频调速柜针对矿用挖掘机的实际使用工况所做的特殊改进,挖掘机整机的电气传动系统及电控系统的设计框图,以及ABB变频调速柜在电铲上的调试应用。 相似文献
13.
介绍海洋石油二期项目的DCS、PLC系统,以DCS为核心,各PLC作为子系统,DCS通过EPLCG、SI通信卡、SMM通信模块与PLC之间通信的原理及应用,通讯技术的应用给事故分析带来的益处. 相似文献
14.
Effects of cutting fluid application on tool wear in machining: Interactions with tool-coatings and tool surface features 总被引:1,自引:0,他引:1
Minimal Quantity of Lubricant (MQL) application of cutting fluids (CFs), or near-dry machining, is being proposed as an environmentally and economically viable alternative to conventional flooding under conditions where dry cutting is not feasible. However, several issues related to CF application effects on cutting tool wear need further clarification, especially, the interactions of CF application with tool-coatings and chip-breakers, both of which are widely employed in industrial cutting tools, need further study. This paper presents the results of an experimental study into the effects of different CF application methods on tool wear during machining of AISI 1045 steel using flat-faced and grooved, coated carbide cutting tools. The results provide insight into the mechanisms of tool wear in the presence of CFs, as well as the influence of chip-breaking geometric features, and tool-coating systems, on CF action. The wear mode was observed to be dictated by thermal considerations, rather than by any friction reduction capability of different CF application methods, and forced attempts at achieving lubricating action were negatively affecting tool life under some conditions. 相似文献
15.
16.
17.
Shen W. Jiang B. Scholten A. Schwenke R. Mi L. Seal C. Wang P. 《Tribology Letters》2004,17(3):637-644
To comprehensively evaluate mar/scratch resistance of a material in a specific application, introduction of a quantitative index is very useful. The index depends on the properties of the material as well as on the application environment. Study of the samples, which have been used in the application environment, investigating the application conditions and figuring out their equivalent laboratory test conditions, is a necessary first step. This is then followed by quantitative evaluation of damages made by different scratching modes. Then, such an index can be formed. This paper introduces the concept of the index and describes the procedure of obtaining the index, including a quantitative evaluation of damages made by different scratching modes. 相似文献
18.
19.