皮带罩冲压工艺及模具设计

通过对皮带罩零件的冲压工艺进行了分析,确定了合理的工艺方案。介绍了拉深模的设计,分析了拉深时零件项部圆角产生拉裂的原因。提出了解决零件拉裂的措施。通过热处理提高了模具的使用寿命,降低了生产成本。     

带内螺纹的望远镜镜身注塑模具设计

分析了望远镜镜身的结构,提出了塑件成型及模具设计的关键点,设计了模具的整体结构。设计了可相对运动的组合式型芯,以增加内抽芯机构的运动空间,通过塑件推出时带动螺纹滑块的移动实现了内侧抽芯。设计了矩形型芯镶块、加工了避空结构,采用螺钉固定,解决了狭小空间安装小型芯的问题,避免了模具干涉。采用了锥面配合,提高了模具的定位精度,减小了配合件的摩擦。经生产验证,该模具生产的塑件质量满足图纸要求。     

基于工艺补充面优化设计的汽车前门外板拉深成形研究

针对表面形状复杂的汽车前门外板进行了冲压缺陷分析并提出了解决方案。分析了制件变形和棱线滑移产生的原因。构造了较产品设计有一定局部偏差的工艺造型,形成了适用于拉深工序的模具型面。对工艺补充面进行了再设计,通过设置工艺凸包和凹陷补偿的方法,解决了门把手安装槽转角的变形问题。利用强压处理调节局部材料流动,并优化了传统的强压区范围,最终有效控制了滑移线。建立了有限元模型,对设计方案进行了模拟验证,制造出了合格的拉深制件。     

磁极高速温挤压工艺及模具设计

叙述了磁极新旧模锻工艺过程。分析了磁极成形的质量问题。拟制了磁极高速温挤压工艺规范。介绍了液压模锻锤上的模具结构。提出了模具设计的关键问题     

铝合金U形外环框架砂型铸造工艺设计及仿真模拟

研究了一种铝合金U形外环框架的铸造工艺方法。针对该铸件外形复杂、壁厚较薄、内腔结构复杂的特点,根据单件小批量生产的要求,在工艺中采用两箱造型工艺。该工艺降低了造型高度,简化了模样制作,方便了内腔型芯的制作和安放。提前制作同质铝棒,铸入铸件本体,既消除了热节,又对型芯起到了支撑作用。在设计浇注系统时,采用了片状直浇道,保证了足够的流速和流量,也保证了液态金属平稳流动,有效地防止了由紊流带来的氧化、夹渣和卷气。分散的内浇道避免了局部过热,改善了热平衡。通过对铸件的仿真模拟,分析了工艺的可行性,确定了整套完整、合理的工艺方案。     

10钢垫圈“一落三”冲压模设计

优化了10钢垫圈的加工工艺,确定了模具的组成零部件和结构。详细介绍了模具的主要零部件的设计。使用该模具降低了成本,提高了生产率。     

重燃叶片定向凝固宏/微观数值模拟及实验研究

通过模拟和实验的方法对比研究了重燃叶片定向凝固过程宏观温度场及微观组织的变化规律。建立了非均匀网格的求解模型,提高了计算效率。基于温度场的模拟结果分析了糊状区的演化规律。采用线性插值算法结合元胞自动机有限差分(cellular automaton finite difference,CAFD)模型模拟了叶片的微观组织,并和实验进行了对比,模拟和实验结果吻合良好。讨论了几种常见晶粒缺陷产生的原因,提出了预防措施。采用电子背散射衍射(electron backscattered diffraction,EBSD)技术进一步探讨了晶粒的竞争生长行为。建立了枝晶臂间距的计算模型,模拟了叶片的枝晶臂间距分布,并进行实验观察,分析了枝晶臂间距的变化规律。从宏、微观的角度解释了叶片的凝固特征,为实际生产提供帮助。     

模块化动力刀架设计（英文）

分析了模块化动力刀架刀盘形式、刀具驱动接口等关键技术。采用同步带和锥齿轮机构设计了径向模块化动力刀架,利用多级齿轮机构设计了轴向模块化动力刀架。设计了用于控制刀架锁紧和动力模块离合的液压系统。选择了带编码器的伺服电机及接近开关等主要电气部件,规划了工作循环方式,绘制了电气系统的连线图。分别制造了径向模块化动力刀架和轴向模块化动力刀架的样机。     

铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

矿物质对冶金焦炭反应性的影响

论述了国内外对矿物质影响冶金焦炭反应性的基本认识。简单介绍了国内外利用矿物质预测焦炭反应性的方法。分析了国内外添加矿物质改变焦炭反应性的技术。阐述了矿物质对焦炭反应性影响的新认识。指出了正确认识、预测和控制焦炭反应性的重要性。     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

Thermodynamics Study on the Decomposition of Chromite with KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

Influence of Heat Treatment on Damping Behaviour of the Magnesium Wrought Alloy AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.     

电化学噪声数据处理方法概述

综述了常见的电化学噪声数据处理方法,介绍了直流趋势剔除、统计分析、快速傅立叶变换(FFT)法计算功率谱密度(PSD)以及小波变换处理电化学噪声信号的基本过程,并阐释了各种数学处理及所得参数的物理意义。