共查询到20条相似文献,搜索用时 156 毫秒
1.
大塑性变形法制备块体纳米材料 总被引:8,自引:0,他引:8
综述了大塑性变形法制备块体纳米材料的发展,常用方法及其工作原理,介绍了大塑性变形法制备块体的纳米材料应满足的基本条件,并在此基础上论述了大塑性变形法的实际应用,指出了目前大塑性变形法在制备块体纳米材料时存在的问题。 相似文献
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
等径角挤压法制备块体超细晶材料的研究现状及展望 总被引:5,自引:0,他引:5
对块体超细晶材料的研究是近年来的一大热点.大塑性变形法(Sever Plastic Deformation,SPD)之一的等径角挤压(Eaqual channel angular pressing ,ECAP)法,可以在室温或不太高的温度下,将材料的晶粒由几微米至几十微米细化至200nm~400nm,材料的性能得到提高,并且ECAP法有着相对简单的制备工艺及较好的细化效果.本文介绍了ECAP处理对提高材料的强度、疲劳寿命、超塑性等的贡献以及影响ECAP工艺的因素,分析了ECAP目前存在的问题,并对ECAP的应用前景进行了展望. 相似文献
12.
13.
In order to find a new way to improve the dispersion ability of nanometer material, an investigation on preparation of thin film with low surface energy on the surface of nanometer material by means of plasma polymerization has been done. Some physical behaviors and chemical constitution of prepared film as well as the influence of polymerized film on nanometer material were tested. All the experimental results showed that this is a possible way to improve the dispersion ability of nanometer materials. 相似文献
14.
纳米钨合金粉末的制备技术 总被引:19,自引:4,他引:19
钨合金包括W-Ni-Fe,W-Ni-Cu,W-Cu,WC-Co等钨基合金材料。钨合金材料将是21世纪出现的一种多功能高性能的多胜任的新型材料。有杉纳米粉末制备的亚微或微米钨合金块体材料具有非常优越的潜在物理力学性能,用作高性能结构件和高性能电子、微电子等功能材料方面都将具有很大的潜在优势,可以更好地满足高性能新型材料的要求。本文综合近几年来国内外纳米钨合金的研究状况,详细地介绍了有关纳米钨合金粉末的制备技术,预测了今后钨合金材料的研究方向。 相似文献
15.
电镀新工艺和新技术的回顾与展望 总被引:4,自引:2,他引:2
对20世纪后期以合金电镀和电子电镀、功能性电镀为主的电镀新工艺作了简要的回顾,对21世纪电镀技术在研制新材料特别是纳米材料中的作为做了展望。 相似文献
16.
机械合金化制备纳米材料 总被引:3,自引:0,他引:3
纳米科技的发展推动了社会乃至全球的经济发展.机械合金化(Mechnical Alloying简称MA)作为一种极具价值的制备纳米材料的方法被越来越多的人所采用.本文对纳米材料的结构、材料的球磨技术、机械合金化制备纳米材料的过程及原理、利用机械合金化制备电触头材料及扩展端际固溶度等进行了阐述. 相似文献
17.
18.
《Acta Materialia》2008,56(18):5340-5344
Ultra-nanocrystalline diamond is a polycrystalline material with crystalline diamond grains in the nanometer size regime. We study the structure and mechanical properties of this material as a function of the average grain size, employing atomistic simulations. From the calculated elastic constants and the estimated hardness, we observe softening of the material as the size of its grains decreases. We attribute the observed softening to the enhanced fraction of interfacial atoms as the average grain size becomes smaller. We provide a fitting formula for the scaling of the cohesive energy and bulk modulus with respect to the average grain size. We find that both these properties scale as quadratic polynomials of the inverse grain size. Our formulas yield correct values for bulk diamond in the limit of large grain sizes. 相似文献
19.
深度轧制技术制备的纳米晶金属板材腐蚀性能研究进展 总被引:3,自引:1,他引:2
概述了目前已提出的几种纳米晶金属材料制备技术和不同纳米晶金属材料腐蚀研究进展。介绍了深度轧制技术制备纳米晶金属板材,阐述了该技术制备的纳米晶金属板材(工业纯铁、304不锈钢和工业纯铝)腐蚀性能研究进展。与相应的普通金属材料相比,深度轧制技术制备的这三种纳米晶金属材料在不同腐蚀环境(溶液、熔盐和高温气体)中耐腐蚀性能(局部腐蚀和均匀腐蚀)提高。大量纳米晶及其相应普通金属材料的腐蚀实验结果表明,传统的材料微观结构参量(成分及其分布、晶粒尺寸、位错密度和残余应力等)不是腐蚀性能的本征参量。提出了从金属材料价电子结构和氧化膜电子结构角度理解金属材料腐蚀性能及其相关腐蚀机理,并在现有工作基础上提出金属材料电化学腐蚀本征参量的概念。 相似文献