共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
结合集散式控制系统的特点,设计了一种嵌入式热力供暖集散控制系统。该系统采用智能化SoC嵌入式数据终端处理器作为控制终端,通过远程定标的方法实现现场检测及高精度的控制。采用时间隧道数据处理的方法使数据处理系统化,提高了系统的稳定性。系统结构可梯次扩展,数据终端与计算机通过公用电话网组成局域数字通信系统。控制终端提供RS-485、RS-232串行口通信,以备系统扩展和升级。实践证明:系统成本低、功能强、灵活、可靠。 相似文献
3.
集散控制系统CS3000是新一代开放型、网络型集散控制系统,其显著特点是具有系统测试功能.本文从三种类型的工程概念和系统测试功能出发,介绍了集散控制系统CS3000在离子膜电解槽中的应用,使离子膜生产实现连锁控制. 相似文献
4.
胡剑波 《工业仪表与自动化装置》1992,(3):28-31
本文介绍一种实用的单线远程数据通信系统,已经应用于实际的集散控制系统中,性能可靠、价格适宜,对集散控制系统的研究和计算机管理系统的研制,有较大的实用价值。 相似文献
5.
一种带有液压控制功能的控制器可以省去单独使用一套液压控制系统,并用首次实现了所有液压元器件的远程维护。这种在标准管材加工机床中的多功能CPU为机床锦上添花。 相似文献
6.
7.
8.
针对当前火力发电厂中存在生产效率较低、自动化控制水平较弱等问题,结合市场上成熟的集散式控制系统,开展了基于OC6000e系统的火力发电厂集散式控制系统(DCS)的总体设计及关键分系统分析研究.通过对该控制系统的实际应用测试,得出:该控制系统具有更高的控制精度及控制效果,系统运行更加稳定,实现了发电厂的智能化集中控制,对提高发电厂的生产效率及作业安全性具有重要作用. 相似文献
9.
10.
基于现场总线的感应淬火机床控制系统设计 总被引:2,自引:0,他引:2
介绍了基于以太网和现场总线(RS485)的感应淬火机床控制系统的硬、软件设计,并简单叙述了远程修改淬火参数和线程技术应用. 相似文献
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
15.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献