Photocatalytic activity of TiO2 doped with boron and vanadium

Boron (B)- and vanadium (V)-doped TiO(2) photocatalysts were synthesized using modified sol-gel reaction processes and characterized by X-ray diffraction (XRD), Raman spectroscopy and N(2) physisorption (BET). The photocatalytic activities were evaluated by monitoring the degradation of methylene blue (MB). The results showed that the materials possess high surface area. The addition of B favored the transformation of anatase to rutile, while in the presence of V, anatase was the only phase detected. The MB degradation on V-doped TiO(2) was significantly affected by the preparation method. In fact while the presence of V in the bulk did not influence strongly the photoreactivity under visible irradiation, an increase of surface V doping lead to improved photodegradation of MB. The degradation of MB dye indicated that the photocatalytic activities of TiO(2) increased as the boron doping increased, with high conversion efficiency for 9mol% B doping.     

Preparation of metal ion (Fe and Ni) doped TiO2 nanoparticles supported on ZSM-5 zeolite and investigation of its photocatalytic activity

Metal ion doped TiO₂ nanoparticles supported on ZSM-5 zeolite (M-TiO₂/ZSM-5 composites, M = Fe or Ni) were synthesized by hydrothermal method. The prepared composites were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activities of composites were evaluated by degradation of yellow GX aqueous solution under ambient condition. Fe-TiO₂/ZSM-5 composite showed to be more efficient catalyst for degradation of dye molecules as compared with Ni-TiO₂/ZSM-5 and TiO₂/ZSM-5. Its higher photocatalytic activity is attributed to the effective separation of charge carriers that will be discussed in this paper in detail.     

Photoinduced hydroxyl radical and photocatalytic activity of samarium-doped TiO(2) nanocrystalline

Sm(3+)-doped TiO(2) nanocrystalline has been prepared by sol-gel auto-combustion technique and characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, and also UV-vis diffuse reflectance spectroscopy (DRS). These Sm(3+)-doped TiO(2) samples were tested for methylene blue (MB) decomposition and *OH radical formation. The analysis of *OH radical formation on the sample surface under UV irradiation was performed by fluorescence technique with using terephthalic acid, which readily reacted with *OH radical to produce highly fluorescent product, 2-hydroxyterephthalic acid. It was observed that the presence of Sm(3+) ion as a dopant significantly enhanced the photocatalytic activity for MB degradation under UV light irradiation because both the larger specific surface area and the greater the formation rate of *OH radical were simultaneously obtained for Sm(3+)-doped TiO(2) nanocrystalline. The adsorption experimental demonstrated that Sm(3+)-TiO(2) had a higher MB adsorption capacity than undoped TiO(2) and the adsorption capacity of MB increased with the increase of samarium ion content. The results also indicated that the greater the formation rate of *OH radical was, the higher photocatalytic activity was achieved. In this study, the optimum amount of Sm(3+) doping was 0.5 mol%, at which the recombination of photo-induced electrons and holes could be effectively inhibited, the highest formation rate of *OH radicals was, and thereby the highest photocatalytic activity was achieved.     

Solar photocatalytic degradation of isoproturon over TiO2/H-MOR composite systems

The photocatalytic degradation and mineralization of isoproturon herbicide was investigated in aqueous solution containing TiO₂ over H-mordenite (H-MOR) photocatalysts under solar light. The catalysts are characterized by X-ray diffraction (XRD), UV–Vis diffused reflectance spectra (UV–Vis DRS), Fourier transform-infra red spectra (FT-IR) and scanning electron microscopy (SEM) techniques. The effect of TiO₂, H-MOR support and different wt% of TiO₂ over the support on the photocatalytic degradation and influence of parameters such as TiO₂ loading, catalyst amount, pH and initial concentration of isoproturon on degradation are evaluated. 15 wt% TiO₂/H-MOR composite is found to be optimum. The degradation reaction follows pseudo-first order kinetics and is discussed in terms of Langmuir–Hinshelwood (L–H) kinetic model. The extent of isoproturon mineralization studied with chemical oxygen demand (COD) and total organic carbon (TOC) measurements and 80% mineralization occurred in 5 h. A plausible mechanism is proposed based on the intermediates identified by liquid chromatography–mass spectroscopy (LC–MS).     

Preparation of nitrogen co-doped SiO2/TiO2 thin films on ceramic with enhanced photocatalytic activity under visible-light irradiation

In this study, we have successfully deposited N-doped SiO₂/TiO₂ thin films on ceramic tile substrates by sol–gel method for auto cleaning purpose. After dip coating and annealing process the film was transparent, smooth and had a strong adhesion on the ceramic tile surface. The synthesised catalysts were then characterised by using several analytical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM) and UV-vis absorption spectroscopy (UV-vis). The analytical results revealed that the optical response of the synthesised N-doped SiO₂/TiO₂ thin films was shifted from the ultraviolet to the visible light region. The nitrogen substituted some of the lattice oxygen atoms. The surface area of co-doped catalyst increased, and its photocatalytic efficiency was enhanced. The photocatalytic tests indicated that nitrogen co-doped SiO₂/TiO₂ thin films demonstrated higher than of the SiO₂/TiO₂ activity in decolouring of methylene blue under visible light. The enhanced photocatalytic activity was attributed to an increasing of the surface area and a forming of more hydroxyl groups in the doped catalyst.     

Synthesis and photocatalytic property of SnO2/TiO2 nanotubes composites

SnO2/TiO2 nanotubes composite photocatalysts with different SnO2 contents were successfully synthesized by means of a simple solvothermal process. The synthesized products were characterized physically by X-ray diffraction (XRD) and high-resolution transmission electron microscope (HRTEM). The composite photocatalysts can not only make the target pollutant, methylene blue (MB), adsorbed at a high concentration level around the surface of the composites but also decrease the recombination rate of electron-hole pairs so as to achieve good photocatalytic performance. The effect of SnO2 contents on the photocatalytic activities of the composites was also investigated. The results showed that the SnO2/TiO2 nanotubes composite photocatalyst with 5 wt.% SnO2 loading had the highest photocatalytic efficiency.     

Preparation and enhanced daylight-induced photocatalytic activity of C,N,S-tridoped titanium dioxide powders

A simple method for preparing highly daylight-induced photoactive nanocrystalline C,N,S-tridoped TiO2 powders was developed by a solid-phase reaction. The as-prepared TiO2 powders were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectra, N2 adsorption-desorption measurements and transmission electron microscopy (TEM). The photocatalytic activity was evaluated by the photocatalytic oxidation of formaldehyde under daylight irradiation in air. The results show that daylight-induced photocatalytic activities of the as-prepared TiO2 powders were improved by C,N,S-tridoping. The C,N,S-tridoped TiO2 powders exhibited stronger absorption in the near UV and visible-light region with red shift in the band-gap transition. When the molar ratio of CS(NH2)2 to xerogel TiO2 powders (prepared by hydrolysis of Ti(OC4H9)4 in distilled water) (R) was kept in 3, the daylight-induced photocatalytic activities of the as-prepared C,N,S-tridoped TiO2 powders were about more than six times greater than that of Degussa P25 and un-doped TiO2 powders. The high activities of the C,N,S-tridoped TiO2 can be attributed to the results of the synergetic effects of strong absorption in the near UV and visible-light region, red shift in adsorption edge and two phase structures of un-doped TiO2 and C,N,S-tridoped TiO2.     

碳纤维负载钐掺杂纳米TiO2复合材料的制备与表征

采用静电纺丝法和热处理工艺制备了纳米碳纤维负载掺杂1.5%(摩尔分数)Sm的纳米Ti O2复合材料(Sm-Ti O2/CNFs),利用SEM、EDX、TEM、FTIR和XRD对其组成和结构进行了表征,并以甲基橙为降解对象,考察了Sm-Ti O2/CNFs复合材料在紫外光照射下对甲基橙的光催化降解效果。结果表明,掺杂Sm3+的Ti O2以锐钛矿晶型均匀分散在碳纳米纤维的表面和内部,质量分数为20%左右;相对于未掺杂的Ti O2/CNFs样品,Sm-Ti O2/CNFs的光催化活性提高约37%。     

TiO2 hydrosols with high activity for photocatalytic degradation of formaldehyde in a gaseous phase

Two types of TiO2 hydrosols (TOSO and HTO) were prepared from titanium sulfate (TiOSO4) and metatitanic acid (H2TiO3) by a chemical precipitation-peptization method, respectively. The prepared hydrosols were characterized by means of X-ray diffraction, particle size distribution, scanning electron microscopy, UV-vis spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller and Barret-Joyner-Halender methods. The results showed that the TiO2 hydrosols with an anatase crystal structure had smaller particle sizes, higher surface areas, larger pore volume, and higher transparence than Degussa P-25 suspension. The photocatalytic activity of the TiO2 hydrosols was evaluated for formaldehyde degradation under UVA illumination in a gaseous phase. The results demonstrated that the photocatalytic activity with the catalyst loading of 2mgcm(-2) was ranked as an order of HTO>TOSO>P-25. The photocatalytic activity was further studied using the HTO catalyst under different experimental conditions. The results showed that catalyst loading, relative humidity, and initial concentration could influence the efficiency of HCHO photocatalytic degradation. It was found that a catalyst loading of more than 2mgcm(-2) and a relative humidity of 55% were two essential conditions for achieving the best performance under these experimental conditions. The repeated experiments indicated that the HTO catalyst was reasonably stable and could be repeatedly used for the HCHO oxidation under UVA irradiation. This investigation would be helpful to promote the application of TiO2 photocatalytic technique for indoor air purification.     

Preparation and characterization of N–I co-doped nanocrystal anatase TiO2 with enhanced photocatalytic activity under visible-light irradiation

N–I co-doped TiO₂ nanoparticles were prepared by hydrolysis method, using ammonia and iodic acid as the doping sources and Ti(OBu)₄ as the titanium source. The prepared catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and ultraviolet–visible diffuse reflection spectroscopy (UV–vis DRS). XRD spectra show that N–I–TiO₂ samples calcined at 673 K for 3 h are of anatase structure. XPS analysis of N–I–TiO₂samples indicates that some N atoms replace O atoms in TiO₂ lattice, and I exist in I⁷⁺, I⁻ and I⁵⁺ chemical states in the samples. UV–vis DRS results reveal that N–I–TiO₂ had significant optical absorption in the region of 400–600 nm. The photocatalytic activity of catalysts was evaluated by monitoring the photocatalytic degradation of methyl orange (MO). Compared with P25 and mono-doped TiO₂, N–I–TiO₂ powder shows higher photocatalytic activity under both visible-light (λ > 420 nm) and UV–vis light irradiation. Furthermore, N–I–TiO₂ also displays higher COD removal rate under UV–vis light irradiation.     

Influence of operational parameters on the TiO2 photocatalytic degradation of Methylene blue

Thin films of titanium oxide were obtained by dip-coating, using the sol–gel method. TiO₂ powder (Degussa, P25) and polyethylene glycol (PEG) were added to enhance the photocatalytic properties of resulting films. Effects of experimental variables on the photocatalytic properties of the coatings were evaluated based on the degradation efficiency of the reference dye (Methylene blue). The photocatalytic activity of resulting TiO₂ coatings was improved with the loading of TiO₂ powder (Degussa, P25) and PEG in the sols. The electron-hole pair photogeneration increases with the energy of irradiation and improves photocatalytic efficiency. Increasing coating thickness leads to a rough surface with more reaction sites. Photodegradation conversion of Methylene blue (Mb) decreases with an increase in the initial concentration of Mb.     

Facile synthesis of copper oxide nanotubes decorated by TiO2 nanoparticles,optical and photocatalytic activity in water

Copper oxide nanotubes decorated by TiO₂ nanoparticles (CNTNs) were fabricated by simple three-step method. First, deposition of copper onto cellulose fibres, then thermal oxidation of copper and cellulose fibres and last simply mixing copper oxide nanotubes and TiO₂ nanoparticles (NPs). Scanning electron microscopy, transmission electron microscopy and X-ray diffraction showed that the synthesised nanotubes were monoclinic-structured polycrystalline CuO with diameter and wall thickness of approximately 50～100 nm and 20～25 nm, respectively. Moreover, the diameter of the TiO₂ NPs is about 20～30 nm. Optical properties of the solutions containing copper oxide nanotubes decorated by TiO₂ NPs were studied. Discrete dipole approximation was used for the calculation of absorption, scattering and extinction cross sections of the deposited CNTNs on a glass substrate. Our simulation results show that there are good agreements between the experimental date and the simulation results. Moreover, the photocatalytic tests were done by methyl orange under visible light (λ = 633 nm) irradiation for prepared samples.     

Glycine assisted synthesis of flower-like TiO2 hierarchical spheres and its application in photocatalysis

Flower-like anatase TiO₂ hierarchical spheres assembled by nanosheets were synthesized by glycine assistant via a simple hydrothermal approach and after-annealing process. These flower-like spheres are about 2 μm in diameter with sheet thickness about 20 nm. Results showed reaction time, temperature, solution pH and glycine dosage all played an important role in control of shape and size of the as-synthesized TiO₂ nanocrystals. The photocatalytic activity of this nano-TiO₂ was evaluated by the photocatalytic oxidation decomposition of methyl orange under sunlight illumination in the presence of hydrogen peroxide (H₂O₂). The photocatalytic activity of the obtained TiO₂ was higher than that of commercial TiO₂.     

Synthesis of nanostructure rutile TiO2 in a carboxyl-containing ionic liquid

Nanostructure rutile TiO₂ was prepared in a carboxyl-containing ionic liquid, 1-methylimidazolium-3-acetate chlorine ([AcMIm]Cl), by using TiOCl₂ solution as a precursor at low temperature. The obtained nanostructure TiO₂ was analyzed with fourier transform infrared (FTIR), X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The as-prepared TiO₂ present only rutile crystal phase and a novel flower-like morphology. The as-prepared rutile TiO₂ shows better photocatalytic performance in the degradation of methyl orange. The template-directing performance of ionic liquid is due to the bidentate chelating complexation between the carboxylic functional group of ionic liquid and titania.     

Mn-doped TiO2 nanopowders with remarkable visible light photocatalytic activity

TiO₂ nanocrystalline powders with various Mn-doping levels were synthesized by the sol-gel process using tetrabutyl titanate and manganese nitrate as precursors. The crystal structure, morphology, doping concentration, optical absorption property, and elemental state of the obtained samples were analyzed. TEM results showed that the synthesized TiO₂ powders were anatase nanoparticles about 7 nm in size. EDX and XPS analyses proved the incorporation of Mn ions into the TiO₂ lattice. A remarkable red shift of the absorption edge was achievable by increased Mn content, leading to gigantically narrowed energy gap to permit absorption well into the infrared spectral region. The dramatic optical absorbance of the doped TiO₂ nanopowders in the visible spectral region led to strong photocatalytic activity under visible light illumination, which was observed by measuring the degradation of methylene blue. In contrast, little degradation was observed for the pure TiO₂ powder. The optimum Mn/Ti ratio was observed to be 0.2 at.% for photocatalytic applications.     

Fabrication and photocatalytic activity of YMn2O5 nanoparticles

In this work, a polyacrylamide gel route is introduced to synthesize YMn₂O₅ nanoparticles. It is demonstrated that high-quality YMn₂O₅ nanoparticles with a uniform size and spherical shape can be prepared using different chelating agents. However, the average particle size of the products is found to have a dependence on the choice of the chelating agent. The sample prepared using citric acid as the chelating agent has an average particle size of ~ 45 nm, while the sample prepared by using the chelating agent EDTA has a particle size centered around 70 nm. The optical energy bandgap of the citric acid- and EDTA-resulted samples is obtained, from optical absorption measurements, to be 1.21 and 1.17 eV, respectively. The photocatalytic experiments reveal that the as-prepared YMn₂O₅ nanoparticles exhibit an interesting photocatalytic activity for oxidative decomposition of methyl red under ultraviolet and visible-light irradiation.     

Photocatalytic degradation of gaseous benzene over TiO2/Sr2CeO4: kinetic model and degradation mechanisms

Photocatalytic oxidation of benzene in air was carried out over TiO2/Sr2CeO4 catalysts. The prepared photocatalyst was characterized by SBET, UV-vis diffuse reflectance and XPS. TiO2/Sr2CeO4 absorbs much more visible light than TiO2 in the visible light region. The XPS spectrum shows that the binding energy value of Ti 2p3/2 transfers to a lower value. The main purpose was to investigate the kinetic model and degradation mechanisms. The kinetic data matched well with the Langmuir-Hinshelwood (L-H) kinetic model with the limiting rate constant and the adsorption constant in this case were 0.0064 mg l-1 min-1 and 9.2078 l mg-1, respectively. No gas-phase intermediates were detected by direct GC/FID analysis under the conditions despite the high benzene concentration. Ethyl acetate and (3-methyl-oxiran-2-yl)-methanol were two major identified intermediates which were accompanied by butylated hydroxytoluene, 2,6-bis(1,1-dimethylethyl)-4,4-dimethylycyclohe, 2,5-cyclohexadiene-1,4,dione,2,6-bis(1,1-dim). It is plausible that at least one of these less-reactive intermediates caused the deactivation of the photocatalyst. Finally, the photocatalytic oxidation mechanisms were speculated.     

Molecular recognitive photocatalytic decomposition on mesoporous silica coated TiO2 particle

Mesoporous silica coated titania exhibited a substrate selective photocatalytic reaction; 4-nonylphenol and phenol were decomposed while nonane was not decomposed by the UV irradiation to their aqueous mixture.     

Dye-sensitized TiO2 film with bifunctionalized zones for photocatalytic degradation of 4-cholophenol

A new strategy to photocatalytic degradation of 4-cholophenol (4-CP) under visible light irradiation was described. The TiO₂ film deposited on an ordinary glass sheet was distributed into two zones. One zone was sensitized by N719 dye and fabricated to be a sandwich type cell with a similar structure of dye-sensitized solar cells. The other zone was inserted into pollutants solution for degradation. A highly oxidized overvoltage anode was achieved from the dye-sensitized zone. The bifunctionalized TiO₂ film and the anode could degrade 4-chlorophenol in two separate reactors with 97% and 96% removal of 4-CP after 5 h, respectively. The degradation efficiency could be improved by addition of FeSO₄. The as-prepared bifunctionalized TiO₂ film was comparably stable in the process of degradation.     

Determination of photo-catalytic activity of un-doped and Mn-doped TiO2 anatase powders on acetaldehyde under UV and visible light

Titanium dioxide (TiO₂) photocatalytic powder materials doped with various levels of manganese (Mn) were synthesized to be used as additives to wall painting in combating indoor and outdoor air pollution. The heterogeneous photocatalytic degradation of gaseous acetaldehyde (CH₃CHO) on Mn-TiO₂ surfaces under ultraviolet and visible (UV/Vis) irradiation was investigated, by employing the Photochemical Static Reactor coupled with Fourier-Transformed Infrared spectroscopy (PSR/FTIR) technique. Experiments were performed by exposing acetaldehyde (~ 400 Pa) and synthetic air mixtures (~ 1.01 × 10⁵ Pa total pressure) on un-doped TiO₂ and doped with various levels of Mn (0.1-33% mole percentage) under UV and visible irradiation at room temperature. Photoactivation was initiated using either UV or visible light sources with known emission spectra. Initially, the photo-activity of CH₃CHO under the above light sources, and the physical adsorption of CH₃CHO on Mn-TiO₂ samples in the absence of light were determined prior to the photocatalytic experiments. The photocatalytic loss of CH₃CHO on un-doped TiO₂ and Mn-TiO₂ samples in the absence and presence of UV or visible irradiation was measured over a long time period (≈ 60 min), to evaluate their relative photocatalytic activity. The gaseous photocatalytic end products were also determined using absorption FTIR spectroscopy. Carbon dioxide (CO₂) was identified as the main photocatalysis product. It was found that 0.1% Mn-TiO₂ samples resulted in the highest photocatalytic loss of CH₃CHO under visible irradiation. This efficiency was drastically diminished at higher levels of Mn doping (1-33%). The CO₂ yields were the highest for 0.1% Mn-TiO₂ samples under UV irradiation, in agreement with the observed highest CH₃CHO decomposition rates. It was demonstrated that low-level (0.1%) doping of TiO₂ with Mn results in a significant increase of their photocatalytic activity in the visible range, compared to un-doped TiO₂. This elevated activity is lost at high doping levels (1-33%). Finally, the photocatalytic degradation mechanism of CH₃CHO on 0.1% Mn-TiO₂ surfaces under visible irradiation leading to low CO₂ yields is different than that under UV irradiation resulting to high CO₂ yields.