Electrochemical characterization of cetyltrimethyl ammonium bromide modified carbon paste electrode and the application in the immobilization of DNA

A cetyltrimethyl ammonium bromide modified carbon paste electrode (CTAB/CPE) was developed in this work based on the surface modification method. The improved electrochemical response of K₄Fe(CN)₆ at this electrode indicated that CTAB could change the surface property of carbon paste electrodes (CPEs), which was demonstrated by the electrochemical impedance spectroscopy (EIS). In 0.1 mM [Fe(CN)₆]^3−/4−, a low exchange current (i₀) of 2.72×10⁻⁷ A at bare CPE was observed while that at CTAB/CPE was 6.79×10⁻⁵ A. The effect of CTAB concentration on the electrode quality revealed that CTAB formed a compact monolayer on the electrode surface with high density of positive charges directed outside the electrode. This electrode showed strong accumulation ability toward Fe(CN)₆⁴⁻ and can also accumulate Co(phen)₃²⁺ by the adsorption of the organic ligands in the hydrophobic area of the monolayer. The electrode was applied to the immobilization of DNA, which was characterized by the isotherm adsorption of Co(phen)₃²⁺.     

Hydroxamation of gold surface via in-situ layer-by-layer functionalization of cysteamine self-assembled monolayer: Preparation and electrochemical characterization

A new, simple, and easy method for introducing hydroxamic acid group onto the surface of polycrystalline gold electrode by means of in-situ layer-by-layer functionalization is described. The fabrication was performed in a four-step method: (i) modification of gold by cysteamine self-assembled monolayer, Au–CA SAM, (ii) activation of nitrilotriacetic acid (NTA) by 1-ethyl-3(3-(dimethylamino)propyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS), (iii) immobilization of activated NTA onto Au–CA to form Au–CA–NTA, and (iv) conversion of the remaining activated carboxylic acid groups of Au–CA–NTA (terminals) to hydroxamic acid groups by using hydroxylamine hydrochloride (HAH) to form Au–CA–NDHA modified electrode. The resulting modified electrode was successfully tested for accumulation of zirconium ion (Zr(IV)) from an aqueous acidic solution. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were used to trace the events in each step, characterize the surface, determine the surface pK_as, and find the affinity of the prepared electrode towards the Zr(IV). Surface pK_as equal to 6.5 and 5.5 were estimated for Au–CA–NTA, and Au–CA–NDHA SAM electrodes, respectively. These values allowed estimating the charge-state of the surface at any pHs. The modified surface showed a large affinity for selective accumulation of Zr(IV) from acidic solution.     

Preparation of polypyrrole/ferrocyanide films modified carbon paste electrode and its application on the electrocatalytic determination of ascorbic acid

Functionalized polypyrrole film were prepared by incorporation of (Fe(CN)₆)⁴⁻ as doping anion, during the electropolymerization of pyrrole onto a carbon paste electrode (CPE) in aqueous solution by using potentiostatic method. The electrochemical behavior of the (Fe(CN)₆)³⁻/(Fe(CN)₆)⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry and double step potential chronoamperometry methods. In this study, an obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole/ferrocyanide films modified carbon paste electrode (Ppy/FCNMCPEs) was demonstrated by oxidation of ascorbic acid. It has been found that under optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such electrode occurs at a potential about 540 mV less positive than unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α and catalytic reaction rate constant, k_h′, were also determined by using various electrochemical approaches.The catalytic oxidation peak current showed a linear dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 4.5×10⁻⁴ to 9.62×10⁻³ M of ascorbic acid with a correlation coefficient of 0.9999. The detection limit (2σ) was determined as 5.82×10⁻⁵ M.     

Green bio-synthesis of Ni/montmorillonite nanocomposite using extract of Allium jesdianum as the nano-catalyst for electrocatalytic oxidation of methanol

In this work, synthesis of Ni nanoparticles was carried out successfully by water extract of Allium jesdianum as a biochemical reducing agent in the presence of montmorillonite clay (MMT) as a natural solid support for the first time. Then the electrochemical activity of the synthesized nanocomposite was investigated in methanol electrocatalytic oxidation. MMT with high cation exchange capacity and nano layer structure was exposed to ion exchange conditions in nickel solution. Then Ni²⁺ ion exchanged form was used in this process as a source of ions and also capping agent. Water extract of Allium jesdianum used as a reducing agent due to abundant availability of phenolic and flavonoid contents. The synthesized Ni/MMT nanocomposite was characterized using UV–Vis spectroscopy (UV–Vis), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and Energy-dispersive X-ray spectroscopy (EDX). The surface of prepared modified electrode has been characterized using SEM to evaluate the morphology, showing uniform dispersion of Ni nanoparticles with mean diameter of 12 to 20 nm. The modified carbon paste electrode was then used in methanol electrocatalytic oxidation reaction. Methanol oxidation on the proposed modified electrode surface occurs at 0.6 V and 0.3 V in alkaline and acidic medium respectively. Also, the results showed the better performance of modified electrode toward methanol electrocatalytic oxidation in comparison with carbon paste electrode that is modified by ion exchanged MMT. Charge transfer coefficients and apparent charge transfer rate constant for the modified electrode in the absence of methanol in alkaline medium were respectively found as: α_a = 0.53, α_c = 0.37 and k_s = 1.6 × 10⁻¹ s⁻¹. Also, the average value of catalytic rate constant for the electrocatalytic oxidation of methanol by the prepared nano-catalyst was estimated to be about 0.9 L·mol^-1·s^-1 by chronoamperometry technique. The prepared electrode was also effective for electrocatalytic oxidation of ethanol and formaldehyde in alkaline medium.     

Poly(o-aminophenol) film prepared in the presence of sodium dodecyl sulfate: Application for nickel ion dispersion and the electrocatalytic oxidation of methanol and ethylene glycol

Poly(o-aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode. The electrochemical behavior of the SDS-POAP carbon paste electrode has been investigated by cyclic voltammetry in 0.5 M HClO₄ and 5 mM K₄[Fe(CN)₆]/0.1 M KCl solutions as the supporting electrolyte and model system, respectively. Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Cyclic voltammetric and chronoamperometric experiments were used for the electrochemical study of this modified electrode. A good redox behavior of the Ni(III)/Ni(II) couple at the surface of electrode can be observed. The electrocatalytic oxidations of methanol and ethylene glycol (EG) at the surface of the Ni/SDS-POAP electrode were studied in a 0.1 M NaOH solution. Compared to bare carbon paste and POAP-modified carbon paste electrodes, the SDS-POAP electrode significantly enhanced the catalytic efficiency of Ni ions for methanol oxidation. Finally, using a chronoamperometric method, the catalytic rate constants (k) for methanol and ethylene glycol were found to be 2.04 × 10⁵ and 1.05 × 10⁷ cm³ mol⁻¹ s⁻¹, respectively.     

Simultaneous determination of paracetamol and ascorbic acid using tetraoctylammonium bromide capped gold nanoparticles immobilized on 1,6-hexanedithiol modified Au electrode

Tetraoctylammonium bromide stabilized gold nanoparticles (TOAB-AuNPs) attached to 1,6-hexanedithiol (HDT) modified Au electrode was used for the simultaneous determination of paracetamol (PA) and ascorbic acid (AA) at physiological pH. The attachment of TOAB-AuNPs on HDT modified Au surface was confirmed by attenuated total reflectance (ATR)-FT-IR spectroscopy and atomic force microscope (AFM). The ATR-FT-IR spectrum of TOAB-AuNPs attached to the HDT monolayer showed a characteristic stretching modes corresponding to -CH₂ and -CH₃ of TOAB, confirming the immobilization of AuNPs with surface-protecting TOAB ions on the surface of the AuNPs after being attached to HDT modified Au electrode. AFM image showed that the immobilized AuNPs were spherical in shape and densely packed to a film of ca. 7 nm thickness. Interestingly, TOAB-AuNPs modified electrode shifted the oxidation potential of PA towards less positive potential by 70 mV and enhanced its oxidation current twice when compared to bare Au electrode. In addition, the AuNPs modified electrode separated the oxidation potentials of AA and PA by 210 mV, whereas bare Au electrode failed to resolve them. The amperometry current of PA was increased linearly from 1.50 × 10⁻⁷ to 1.34 × 10⁻⁵ M with a correlation coefficient of 0.9981 and the lowest detection limit was found to be 2.6 nM (S/N = 3). The present method was successfully used to determine the concentration of PA in human blood plasma and commercial drugs.     

Voltammetric study of interaction of Co(phen)3 with DNA at gold nanoparticle self-assembly electrode

Modifying electrode surfaces on the molecule scale allow developing new electrochemical biosensors. A new strategy for the immobilization of calf thymus DNA on the surface of gold nanoparticles which are co-immobilized at a gold electrode through 4,4^′-bis(methanethiol) biphenyl (MTP) molecule by assembly process is demonstrated. The DNA modified electrode was incubated in Co(phen)₃³⁺ solution of an aqueous buffer or an acetonitrile (AN) solution, then it was rinsed and placed in a Co(phen)₃³⁺ free buffer solution or AN solution, followed by cyclic voltammetric experiments. Clear redox peaks of Co(phen)₃³⁺ were observed both in an aqueous and AN solutions. The concentration of supporting electrolyte on electrochemical behavior was discussed. It was found that the surface coverage value of DNA molecules on modified gold nanoparticle and the redox current of adsorbed Co(phen)₃³⁺ were decrease with increasing the size of gold nanoparticles (6, 25, 42, 73, and 93 nm). In aqueous solution, the electron transfer rate constant of Co(phen)₃^3+/2+ redox couple became slow with increasing the diameter of gold nanoparticle, and the speed almost had nothing to do with the diameter in nonaqueous solution. The surface concentration of Co(phen)₃³⁺ adsorption on DNA modified electrode decreased and rate constant of adsorption kinetics increased with increasing the interactive temperature. In AN solution, the electrostatic interaction between DNA and Co(phen)₃^3+/2+ was greatly reduced, however, compare with in aqueous solution the interaction between DNA and reduced form of Co(phen)₃²⁺ was more strongly than oxidized form Co(phen)₃³⁺. The surface concentration of Co(phen)₃³⁺ adsorption on DNA modified electrode reach maximum value when the interactive temperature about 20 °C, and rate constant of adsorption kinetics nearly independent of the interactive temperature. The results show that the DNA can adsorb on the modified electrode firmly and the Co(phen)₃^3+/2+ adsorbed on DNA give good electrochemical response both in aqueous and nonaqueous solutions. It was confirmed that the DNA modified electrode can be applied in a nonaqueous system and the modified electrode can be used to investigate the interaction between DNA and electroactive species both in aqueous and nonaqueous systems.     

Potentiometric stripping analysis of bismuth based on carbon paste electrode modified with cryptand [2.2.1] and multiwalled carbon nanotubes

An electrochemical method based on potentiometric stripping analysis (PSA) employing a cryptand [2.2.1] (CRY) and carbon nanotube (CNT) modified paste electrode (CRY-CNT-PE) has been proposed for the subnanomolar determination of bismuth. The characterization of the electrode surface has been carried out by means of scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronocoulometry (CC). It was observed that by employing CRY-CNT-PE, a 9-fold enhancement in the PSA signal (dt/dE) was observed as compared to plain carbon paste electrode (PCPE). Under the optimized conditions, dt/dE (s/V) was proportional to the Bi(III) concentration in the range of 5.55 × 10⁻⁸ to 9.79 × 10⁻¹¹ M (r = 0.9990) with the detection limit (S/N = 3) of 3.17 × 10⁻¹¹ M. The practical analytical utilities of the modified electrode were demonstrated by the determination of bismuth in pharmaceutical formulations, human hair, sea water, urine and blood serum samples. The prepared modified electrode showed several advantages, such as a simple preparation method, high sensitivity, very low detection limits and excellent reproducibility. Moreover, the results obtained for bismuth analysis in commercial and real samples using CRY-CNT-PE and those obtained by atomic absorption spectroscopy (AAS) are in agreement at the 95% confidence level.     

Voltammetric determination of ascorbic acid and dopamine in the same sample at the surface of a carbon paste electrode modified with polypyrrole/ferrocyanide films

Functionalized polypyrrole film were prepared by incorporation of [Fe(CN)₆]⁴⁻ as a doping anion, during the electropolymerization of pyrrole onto a carbon paste electrode in an aqueous solution by potentiostatic method. The electrochemical behavior of dopamine (DA) and ascorbic acid (AA) in one solution was studied at the surface of bare and modified carbon paste electrodes using cyclic voltammetry (CV), linear sweep voltammetry (LSV) and differntial pulse voltammetry (DPV) methods. The well separated anodic peaks for oxidation of DA and AA were observed at the surface of the modified carbon paste electrode under optimum condition (pH 6.00), which can be used for determination of these species simultaneously in mixture by LSV and DPV methods. The linear analytical curves were obtained in the ranges of 0.10-1.00 mM and 0.10-0.95 mM for ascorbic acid and 0.10-1.20 mM and 0.20-0.95 mM for dopamine concentrations using LSV and DPV methods, respectively. The detection limits (2σ) were determined as 3.38 × 10⁻⁵ M and 1.34 × 10⁻⁵ M of ascorbic acid and 3.86 × 10⁻⁵ M and 1.51 × 10⁻⁵ M of dopamine by CV and DPV methods.     

A promising bioelectrode based on gene of Mycobacterium leprae immobilized onto poly(4‐aminophenol)

A new bioelectrode for gene detection of Mycobacterium leprae, also known as Hansen's bacillus, was produced by immobilizing of single‐stranded DNA (ssDNA) with 78 bases long (specific gene related to Mycobacterium leprae) on graphite electrode modified with poly(4‐aminophenol). This biosensing platform was able to recognize complementary DNA molecules via hybridization process. Hybridization between probe and target was monitored by voltammetry, using ferrocenecarboxyaldehyde as electrochemical DNA hybridization indicator. The hybridization of nucleic acid probe with the DNA target resulted in significant decrease in the oxidation peak current of ferrocenecarboxyaldehyde, indicating greater affinity of this compound for ssDNA than for double‐strand DNA (dsDNA). The linear range of detection for the DNA target was found to be 0.35 – 35 ng/μL. ssDNA hybridization with the DNA target was also investigated by electrochemical impedance spectroscopy (EIS), showing significant modification in Nyquist plot, by modification in electrode surface after addition of the complementary target. The effective immobilization of specific gene of Mycobacterium leprae onto graphite electrode modified with poly(4‐aminophenol) and the detection of the hybridization process with the DNA target, monitored by voltammetry and EIS indicate that this is a new and promising biosensing platform to gene detection of Hansen's bacillus. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The bioelectrocatalytic properties of cytochrome C by direct electrochemistry on DNA film modified electrode

The direct electrochemistry of cytochrome C can be performed in weak acidic and basic aqueous solutions. Cytochrome C can be deposited as a stable and electrochemically active film on a deoxyribonucleic acid (DNA) modified glassy carbon electrode. These films can also be produced on gold, platinum, and transparent semiconducting tin oxide electrodes. Two-layer modified electrodes containing cytochrome C and a DNA film were prepared by the deposition of cytochrome C on a DNA film modified electrode. The cytochrome C/DNA film was electrocatalytically oxidation active for l-cysteine in a pH 8.3 tris(hydroxymethyl)aminomethane (TRIS)-buffered aqueous solution through both Fe^III and Fe^IV species. The electrocatalytic oxidation current developed from the anodic peak of the redox couple. The electrocatalytic oxidation properties of ascorbic acid, NH₂OH, N₂H₄, and SO₃²⁻ by a cytochrome C/DNA film were also determined, and shown to be electrocatalytically active. An electrochemical quartz crystal microbalance, cyclic voltammetry, and direct spectroelectrochemistry were used to study in situ DNA deposition on a gold disc electrode and cytochrome C deposition on DNA/Au and DNA/GC films. The direct electrochemistry of cytochrome C can also be performed, and it can be deposited as a stable and electrochemically active film on polyvinyl sulfonate, polystyrene sulfonate, TiO₂, and polyethylene glycol modified glassy carbon electrodes. The results show that cytochrome C interacts with, and deposits on, a DNA film modified electrode, and that the cytochrome C (Fe^III) oxidized form is more easily deposited on a DNA film than the cytochrome C (Fe^II) reduced form.     

Immobilizing DNA on clay mineral modified carbon paste electrodes

Al-kaolinite, Al-montmorillonite, and Al₁₃-montmorillonite have been prepared and their electrokinetic mobility were measured to be – 2.06 × 10^- 8, -0.62 × 10^- 8 and +2.98 × 10^- 8 m²V^{- 1}s^{- 1} respectively. DNA immobilized on the clay mineral modified carbon paste electrode via the positive charges of the clay mineral. The immobilizing efficiencies of DNA were monitored with the DNA markers methylene blue (MB) and ethidium bromide (EB) and they were of the following sequence: Al-kaolinite < Al-montmorillonite < Al₁₃-montmorillonite. The immobilization did not affect the binding event between DNA and MB or EB. The obtained DNA-sensors can be used to study the interaction between low molecular weight compounds and DNA as well as the different binding strength of low molecular weight compounds with ssDNA and dsDNA.     

Co (II) porphyrin adsorbed on SiO2/SnO2/phosphate prepared by the sol-gel method: Application in electroreduction of dissolved dioxygen

This paper describes the immobilization procedure of 5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21-H,23-H-porphyrin ion on SiO₂/SnO₂/phosphate, obtained by the sol-gel processing method. P 2p X-ray photoelectron and the ³¹P MAS NMR spectra revealed that dihydrogen phosphate is the species present on the surface. The porphyrin was adsorbed on the surface of the modified material and furthermore metallized in situ with Co (II) ion. The porphyrin metallation process was followed with UV-vis spectroscopy by inspecting the Q bands of the free and metallated porphyrin. The free porphyrin presented four Q bands associated to a D_2h local symmetry and the metallated one, two bands related to a D_4h local symmetry. The amount of electroactive species adsorbed on the material was estimated by integrating the area under the peak of Co (II) → Co (I) reduction by using the pulse differential voltammetric technique. The amount of the metallated porphyrin was 2.3 × 10⁻¹⁰ mol cm⁻². A carbon paste electrode of the modified material containing metallated porphyrin was used to study the electrocatalytic reduction of dissolved dioxygen by means of cyclic voltammetry, chronoamperometry and linear sweeping voltammetry. The modified electrode was very stable and exhibited the electrocatalytic reduction of dissolved dioxygen at −180 mV versus SCE by a two-electron mechanism, producing hydrogen peroxide at pH 5.4. The electroactive species was strongly retained on the material surface, presumably inside the pores of the material, since in a test of various oxidation-reduction cycles no significant decrease of the current densities was detected, indicating that it was not leached off during the experiment.     

Electrocatalytic oxidation of ascorbic acid at a 2,2′-(1,8-octanediylbisnitriloethylidine)-bis-hydroquinone modified carbon paste electrode

Cyclic voltammetry and chronoamperometry were used to investigate the electrochemical behavior of ascorbic acid at a carbon paste electrode modified with 2,2′-(1,8-octanediylbisnitriloethylidine)-bis-hydroquinone (1,8-OBNEBHQ). The modified carbon paste electrode showed high electrocatalytic activity toward ascorbic acid; the current was enhanced significantly relative to the situation prevailing when an unmodified carbon paste electrode was used. The electrocatalytic process was highly dependent on the pH of the supporting electrolyte. The apparent charge transfer rate constant, k_s, and transfer coefficient, α, for electron transfer between 1,8-OBNEBHQ and carbon paste electrode were calculated as 20.2 ± 0.5 s⁻¹ and 0.47, respectively. Using differential pulse voltammetry, the calibration curves for AA were obtained over the range of 5–30 and 40–1,500 μM, respectively. The detection limit (kσ, k = 2) was 0.6 μM. With good selectivity and sensitivity, the present method provides a simple method for selective detection of ascorbic acid in biological samples.     

Direct electrochemical behavior of cytochrome c on DNA modified glassy carbon electrode and its application to nitric oxide biosensor

Cytochrome c/DNA modified electrode was achieved by coating calf thymus DNA onto the surface of glassy carbon electrode firstly, then immobilizing cytochrome c on it by multi-cyclic voltammetric method and characterized by the electrochemical impedance. The electrochemical behavior of cytochrome c on DNA modified electrode was explored and showed a quasi-reversible electrochemical redox behavior with a formal potential of 0.045 ± 0.010 V (versus Ag/AgCl) in 0.10 M, pH 5.0, acetate buffer solution. The peak currents were linearly with the scan rate in the range of 20-200 mV/s. Cytochrome c/DNA modified electrode exhibited elegant catalytic activity for the electrochemical reduction of NO. The catalytic current is linear to the nitric oxide concentration in the range of 6.0 × 10⁻⁷ to 8.0 × 10⁻⁶ M and the detection limit was 1.0 × 10⁻⁷ M (three times the ratio of signal to noise, S/N = 3).     

A carboxyalkanethiol monolayer modified electrode for blocking of ascorbic acid oxidation and its application to a biosensor

Upon the application of amperometric biosensor to the biological fluid, ascorbic acid interferes the amperometric determination of analytes, because the oxidative potential of ascorbic acid is lower than that of electro active substances such as H₂O₂ produced by the enzymatic reaction. In this study we propose a method to block ascorbic acid based on the electrostatic interaction with self-assembled monolayer (SAM) and its application of the surface modified electrode to biosensor. In order to form SAM on the gold electrode with carboxyl group, 7-carboxy-heptanethiol (7-CHT) was used. The 7-CHT modified electrode did not show anodic response to ascorbic acid, but oxidized phenanthroline cobalt complex [Co(phen)₃²⁺], which can be used as a mediator of biosensor. Thus, the 7CHT-modified electrode was applied to biosensor mediated with Co(phen)₃²⁺. Fructose dehydrogenase (FDH) was immobilized to the 7-CHT modified electrode. Fructose was determined selectively with the FDH/7-CHT modified electrode at the range of 0.2-2 mM.     

Novel electrode for electrochemical stripping analysis based on carbon paste modified with bismuth powder

Bismuth-powder modified carbon paste electrode (Bi-CPE) is presented as an attractive “mercury-free” sensor applicable in electrochemical striping analysis of selected heavy metals. The electrode paste was prepared as a mixture of finely powdered metallic bismuth together with graphite powder and silicon oil. The Bi-CPE was characterized in nondeaerated solutions containing Cd(II) and Pb(II) at the μg/L level in conjunction with square-wave anodic stripping voltammetry. The electrode exhibited well-defined and separated stripping signals for both metals accompanied with a low background contribution, and a reproducibility of 5.6 and 6.0% (n = 12) for 20 μg/L Cd(II) and Pb(II), respectively. The Bi-CPE exhibited superior performance in comparison to the bare carbon paste electrode (CPE) and the bismuth paste electrode (BiPE) and surprisingly, yielded a higher response than the in situ prepared bismuth-film carbon paste electrode. The electrode displayed excellent linear behavior in the examined concentration range from 10 to 100 μg/L Cd(II) + Pb(II) (R² = 0.998 for both), with limits of detection of 1.2 μg/L for Cd(II) and 0.9 μg/L for Pb(II). The electroanalytical performance of Bi-CPE was successfully tested in a real sample of tap water spiked with Cd(II) and Pb(II).     

Ni(II)-quercetin complex modified multiwall carbon nanotube ionic liquid paste electrode and its electrocatalytic activity toward the oxidation of glucose

A modified electrode Ni(II)-Qu-MWCNT-IL-PE has been fabricated by electrodepositing Ni(II)-quercetin [Ni(II)-Qu] complex on the surface of multi-wall carbon nanotube ionic liquid paste electrode (MWCNT-IL-PE) in alkaline solution. The Ni(II)-Qu-MWCNT-IL-PE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni(II)-Qu-MWCNT-PE. It also shows good electrocatalytic activity toward the oxidation of glucose. Kinetic parameters such as the electron transfer coefficient α, rate constant k_s of the electrode reaction and the catalytic rate constant k_cat of the catalytic reaction are determined. Moreover, the catalytic current presents linear dependence on the concentration of glucose from 5.0 μM to 2.8 mM, with a detection limit of 1.0 μM by amperometry. The modified electrode for glucose determination is of the property of simple preparation, good stability, fast response and high sensitivity.     

Electroanalysis of thiocyanate using a novel glassy carbon electrode modified by aryl radicals and cobalt tetracarboxyphthalocyanine

Electrochemical grafting of 4-nitrobenzenediazonium tetrafluoroborate onto a glassy carbon electrode (GCE) results in the formation of a nitrophenyl radical, which reacts with the surface to form a covalent bond (grafting) and results in a nitrophenyl modified electrode. The nitro group is electrochemically reduced to a NH₂ group. Cobalt tetracarboxyphthalocyanine (CoTCPc) complex is then attached to the NH₂ group using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The new CoTCPc modified electrode was characterized using cyclic voltammetry and then employed for the catalytic oxidation of thiocyanate.     

Deposition of new thia-containing Schiff-base iron (III) complexes onto carbon nanotube-modified glassy carbon electrodes as a biosensor for electrooxidation and determination of amino acids

Multiwall carbon nanotubes (MWCNTs) were used as an immobilization matrix to incorporate an Fe (III)–Schiff base complex as an electron-transfer mediator onto a glassy carbon electrode surface. First, the preheated glassy carbon was subjected to abrasive immobilization of MWCNTs by gently rubbing the electrode surface on filter paper supporting the carbon nanotubes. Second, the electrode surface was modified by casting 100 μL of an Fe (III)-complex solution (0.01 M in ACN). The cyclic voltammograms of the modified electrode in an aqueous solution displayed a pair of well-defined, stable and nearly reversible reductive oxidation redox systems with surface confined characteristics. Combinations of unique electronic and electrocatalytic properties of MWCNTs and Fe (III)–Schiff base complexes resulted in a remarkable synergistic augmentation of the response. The electrochemical behavior and stability of the modified electrode in aqueous solutions at pH 1–9 were characterized by cyclic voltammetry. The apparent electron transfer rate constant (K_s) and transfer coefficient (a) were determined by cyclic voltammetry and were approximately 7 s⁻¹ and 0.55, respectively. The modified electrodes showed excellent catalytic activity towards the oxidation of amino acids at an unusually positive potential in acidic solution. They also displayed inherent stability at a wide pH range, fast response time, high sensitivity, low detection limit and had a remarkably positive potential oxidation of amino acids that decreased the effect of interferences in analysis. The linear concentration range, limits of detection (LOD), limits of quantization (LOQ) and relative standard deviation of the proposed sensor for the amino acid detection were 1–55,000, 1.10–13.70, 2.79–27.14 and 1.30–5.11, respectively.