High temperature behaviour of self-consolidating concrete: Microstructure and physicochemical properties

This paper presents an experimental study on the properties of self-compacting concrete (SCC) subjected to high temperature. Two SCC mixtures and one vibrated concrete mixture were tested. These concrete mixtures come from the French National Project B@P. The specimens of each concrete mixture were heated at a rate of 1 °C/min up to different temperatures (150, 300, 450 and 600 °C). In order to ensure a uniform temperature throughout the specimens, the temperature was held constant at the maximum temperature for 1 h before cooling. Mechanical properties at ambient temperature and residual mechanical properties after heating have already been determined. In this paper, the physicochemical properties and the microstuctural characteristics are presented. Thermogravimetric analysis, thermodifferential analysis, X-ray diffraction and SEM observations were used. The aim of these studies was in particular to explain the observed residual compressive strength increase between 150 and 300 °C.     

Thermo- and pH-sensitive dendrimer derivatives with a shell of poly(N,N-dimethylaminoethyl methacrylate) and study of their controlled drug release behavior

Novel dendrimer derivatives combining the temperature- and pH-sensitivities are synthesized. At first, polyamidoamine (PAMAM) dendrimers with generations 1-5 are synthesized by the reaction of ethylenediamine with methyl acrylate, and then the dendrimers are acylated by chloroacetyl chloride to obtain PAMAM-Cl, which can act as a macroinitiator for further synthesizing functional dendrimers. For fulfilling this goal, the polymers consisting of a dendritic PAMAM core and poly(N,N-dimethylaminoethyl methacrylate) (PDMA) shell are synthesized by atom transfer radical polymerization (ATRP). Their macromolecular structures are characterized by FTIR, ¹H NMR, DSC and particle size analyses, and their aqueous solutions are inspected by UV spectroscopy for understanding their thermo- and pH-sensitivities. The results show that novel dendrimer derivatives exhibit clearly thermo- and pH-respondings in accordance with the change of the environment. Using chlorambucil (CLB) as a model drug, the behaviors of the controlled drug release from polymers with different average graft length of PDMA are studied. The results indicate that the rate of the drug release can be effectively controlled by the pH value.     

The effect of surface chemistry and nanoclay loading on the microcellular structure of porous poly(d,l lactic acid) nanocomposites

Three series of polymer nanocomposites, based on poly(d,l lactic acid) (PDLLA) and organically modified montmorillonite, were prepared by the melt and the solution intercalation technique. The first series was prepared by extrusion using different clay loadings. The second series of nanohybrids was obtained using montmorillonite modified with different types of alkylammonium surfactants in terms of carbon-chain lengths (i.e., 4, 8, 12, 16 and 18). In the third series of nanocomposites, the organic cation concentration of the surfactant was varying. Microcellular porous materials were, afterwards, fabricated from these three series of nanocomposites. The porous structures of pure and nanocomposite PDLLA were prepared by isothermal pressure quench using supercritical CO₂ as foaming agent. The morphology of the produced porous materials was investigated by scanning electron microscopy (SEM). Image processing of the samples revealed that the final cellular structure is strongly related to clay loading and, both, the type and the organic cation concentration of the alkylammonium used for the modification of the clay. The results suggest that the size of the pores decreases and the cell density and bulk foam density increase with the increase of clay loading or the surfactant's carbon chain length or the cation concentration in clay. Clay dispersion seems to be enhanced by the supercritical treatment upon foaming.     

Development of low-pH cementitious materials for HLRW repositories: Resistance against ground waters aggression

One of the most accepted engineering construction concepts of underground repositories for high radioactive waste considers the use of low-pH cementitious materials. This paper deals with the design of those based on Ordinary Portland Cements with high contents of silica fume and/or fly ashes that modify most of the concrete “standard” properties, the pore fluid composition and the microstructure of the hydrated products. Their resistance to long-term groundwater aggression is also evaluated. The results show that the use of OPC cement binders with high silica content produces low-pH pore waters and the microstructure of these cement pastes is different from the conventional OPC ones, generating C-S-H gels with lower CaO/SiO₂ ratios that possibly bind alkali ions. Leaching tests show a good resistance of low-pH concretes against groundwater aggression although an altered front can be observed.     

Deformation studies of single rigid-rod polymer-based fibres. Part 1. Determination of crystal modulus

This series of papers covers several aspects related to the influence of external stresses on the crystalline microstructure of rigid-rod polymer-based fibres. For the study, the main three fibres of this type have been selected, namely poly(p-phenylenebenzobisoxazole) (PBO fibres), poly(p-phenylenebenzobisthiazole) (PBT or PBZT fibres) and the novel poly{2,6-diimidazo[4,5-b:4′-5′-e]pyridinylene-1,4(2,5-dihydroxy)phenylene} (PIPD or M5 fibres). Synchrotron radiation was employed to record high-quality wide-angle X-ray scattering patterns from single fibres. The present paper deals mainly with the evaluation of lattice strain along the fibre axis (c-)direction. Crystal moduli of the different fibres were calculated from the variation with stress of the lattice strain determined from the shift of the major meridional (00l) reflections. This procedure rendered values of approximately 440 GPa for the crystal modulus of PIPD and PBO fibres, and 350 GPa for the PBT one. The difference between these two values was explained in terms of specific molecular conformation of the monomers in the unit cell. Discrepancies between the crystal and macroscopic (calculated from tensile tests) moduli are due to imperfections generated during the manufacture of the fibres.     

The electroreduction of alkyl iodides and polyiodides: The kinetic model of EC(C)E and ECE-EC(C)E mechanisms with included transfer coefficient variability

The cyclic voltammetry electroreduction of seven alkyl iodides was investigated in 0.3 M TBAP/DMF on glassy carbon electrode. The influence of carbon chain length and the number of iodine atoms in the molecule was examined. The two-electron reductive cleavage with iodine elimination was numerically resolved into one-electron consecutive steps. The mechanism of the process was discussed applying the mathematical EC(C)E and ECE-EC(C)E kinetic models with included transfer coefficient variability for one stage electroreduction of RI and two stage electroreduction of RI₂, respectively. For electroreduction of diiodomethane the discrimination of elementary alpha parameter between two reduction stages was determined.     

Mechanistic study of electrochemical oxidation of catechols in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of catechols (1a-1c) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a-1c) participate in Michael addition reactions with 3 to form the corresponding benzofuran (or isochromeno[4,3-c]quinoline) derivatives (6a-6c). The electrochemical synthesis of (6a-6c) has been successfully performed in an undivided cell in good yield and purity. The oxidation mechanism was deduced from voltammetric data and by coulometry at controlled-potential. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

Mechanistic study of electrochemical oxidation of o-dihydroxybenzenes in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of o-dihydroxybenzenes (1a and 1b) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-quinones derived from o-dihydroxybenzenes (1a and 1b) participate in 1,4-(michael) addition reactions with 3 to form the corresponding new o-dihydroxybenzene derivatives (6a and 6b). We propose a mechanism for the electrode process. The efficient electrochemical synthesis of 6a and 6b has been successfully performed at carbon rod electrodes in an undivided cell in good yield and purity. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

Simultaneous removal of asphaltenes and water from water-in-bitumen emulsion: II. Application feasibility

Application feasibility of the accelerated deasphaltening process for simultaneous removal of asphaltenes and water from a water-in-bitumen emulsion has been examined with a pilot plant having capacity of 1.590 m3/day. The solvent (n-pentane) was injected into the emulsion from three locations with progressively increasing temperature from 423 K. The first solvent injection precipitated the asphaltenes in bitumen, the second broke the emulsion and facilitated the phase separation, and the third extracted the oil that remained in heavy asphaltenes/water phase. The effects of operation parameters such as temperature, solvent/bitumen ratio, feed rate and feedstock composition on the quality of DAO (Deasphaltening oil) were investigated. The DAO with the yield of ~ 80 wt.% and asphaltene content of < 0.5 wt.% was produced under optimal operating conditions, and the residual product was a porous solids containing 38% sulfur, 47% nitrogen, 64% MCR, and 85% metals (nickel and vanadium) of the bitumen. For a real application in oil industry, other important aspects including energy efficiency, solvent recovery and water purification have been discussed.     

Preparation and electrochemical characterization of palladium single crystal electrodes in 0.1 M H2SO4 and HClO4: Part I. Low-index phases

The electrochemical properties of Pd(1 1 1), Pd(1 0 0) and Pd(1 1 0) single crystal bead electrodes, prepared by a novel electron beam heating and inductive annealing technique, have been characterized in 0.1 M sulfuric acid and 0.1 M perchloric acid by cyclic voltammetry and chronoamperometry. Hydrogen and (hydrogen) sulfate adsorption as well as surface oxidation were found to depend strongly on the crystallographic orientation and the nature of the electrolyte. The combination of charge displacement and voltammetric experiments allowed the determination of the potentials of zero total charge (E_pztc) of Pd(1 1 1) and Pd(1 0 0). The values of E_pztc in sulfuric acid were found to be more negative than in perchloric acid. The estimation of E_pztc for Pd(1 1 0) was hampered by the superposition with hydrogen absorption. The electro-oxidation of irreversible adsorbed carbon monoxide monolayers was studied on the three low-index Pd electrodes. The onset potential of the CO oxidation reaction follows the sequence Pd(1 0 0) < Pd(1 1 0) < Pd(1 1 1). Chronoamperometric experiments revealed a pronounced structure sensitivity of the reaction kinetics. The processes involved are determined by nucleation of oxygen-containing species on defect (step) sites and by slow diffusion of CO_ads on (1 1 1) terrace sites.     

Specific surface reactions for identification of platinum surface domains: Surface characterization and electrocatalytic tests

The electrochemical properties of bismuth and germanium irreversibly adsorbed on platinum electrodes have been used to screen the surface domains of polycrystalline electrodes. As revealed by the use of stepped surfaces, bismuth adsorbed on (1 1 1) terrace sites shows a redox peak at 0.63 V, whose charge is proportional to the number of (1 1 1) terrace sites, without any interference from bismuth adsorbed on any other site. For the characterization of (1 0 0) terrace sites, adsorption of germanium can be used, since the adatoms adsorbed on the (1 0 0) terrace sites show a redox peak at 0.55 V. Although no other peak is found in this potential region for the germanium adsorbed on other sites, other contributions may give rise to an increase in the current in this region. After the appropriate corrections, the charge for bismuth and germanium redox process in the selected region is proportional to the number of terrace sites with (1 1 1) and (1 0 0) symmetry, respectively. These relationships can be used to characterize the bidimensional domains of any platinum electrode. Four different platinum nanoparticle electrodes were characterized and the results were used to understand their behaviour towards ammonia oxidation.     

Autogenous deformations of cement pastes: Part II. W/C effects, micro-macro correlations, and threshold values

A broad experimental study has been performed, from the end of mixing up to 2 years, on a set of plain cement pastes prepared with the same type I ordinary portland cement (OPC) and various water-to-cement ratios (W/C), and cured at various constant temperatures. Several parameters have been measured on the hydrating materials, such as chemical shrinkage, volumetric and one-dimensional autogenous deformations, degree of hydration of the cement, Ca(OH)₂ content and Vicat setting times. Drying shrinkage has also been measured on the mature materials. In this part II of the paper, the effects of W/C within the range 0.25-0.60 have in particular been analysed in relation to the microstructural characteristics of the materials. This micro-macro analysis has highlighted a W/C threshold value (located around 0.40) both at the macro-level (on autogenous, but also on drying deformations and durability-related properties) and at the micro-level (characteristics of the hydration products, MIP porosity and pore size distribution, etc.).In addition, volumetric and one-dimensional autogenous shrinkage deformations have been compared in the case of W/C=0.25 and T=20 °C. Finally, a critical twofold (chemical and structural) effect of calcium hydroxide has been found. When significant structural effects, generated by the formation and the growth of large-size Ca(OH)₂ crystals, take place, swelling can become prominent, as observed for one-dimensional autogenous deformations in the case of medium and high W/C, and deviations are recorded on linear relationships.     

An identification study of vermiculites and micas: Adsorption of metal ions in aqueous solution

This study deals with the identification of vermiculite in the presence of mica. Three natural silicates were first subjected to expansion by rapid heat treated at 400 °C. Then, the starting silicates and their derived heat-treated products were analyzed by X-ray diffraction, FT-IR spectroscopy, N₂ adsorption at − 196 °C, and helium density measurement. The adsorption of cadmium, chromium, and lead was also carried out. Two of the silicates are composed of mainly biotite and the other of biotite and vermiculite. In general, the results of X-ray diffraction, FT-IR spectroscopy, and helium density measurements are well in agreement. The heat treatment at 400 °C has little effect on the chemical composition, structure, and texture of the silicates. The development of microporosity is small in the silicates. Surprisingly, the adsorption capacity toward chromium and lead is larger for the biotite silicate than for the vermiculite containing silicate.     

Thermal degradation of poly(l-lactide): effect of alkali earth metal oxides for selective l,l-lactide formation

To achieve the feed stock recycling of poly(l-lactide) (PLLA) to l,l-lactide, PLLA composites including alkali earth metal oxides, such as calcium oxide (CaO) and magnesium oxide (MgO), were prepared and the effect of such metal oxides on the thermal degradation was investigated from the viewpoint of selective l,l-lactide formation. Metal oxides both lowered the degradation temperature range of PLLA and completely suppressed the production of oligomers other than lactides. CaO markedly lowered the degradation temperature, but caused some racemization of lactide, especially in a temperature range lower than 250 °C. Interestingly, with MgO racemization was avoided even in the lower temperature range. It is considered that the effect of MgO on the racemization is due to the lower basicity of Mg compared to Ca. At temperatures lower than 270 °C, the pyrolysis of PLLA/MgO (5 wt%) composite occurred smoothly causing unzipping depolymerization, resulting in selective l,l-lactide production. A degradation mechanism was discussed based on the results of kinetic analysis. A practical approach for the selective production of l,l-lactide from PLLA is proposed by using the PLLA/MgO composite.     

New quality criteria in wastewater reuse : The case of Gran Canaria

Wastewater reuse plays a key role in this vital cycle of water because it is able to reduce the wastewater spilled. Simultaneously, the supply of water for specific uses is increased. A new regulation (Royal Decree 1620/2007) came into force in Spain in December 2007 and regulates the basic conditions for the wastewater reuse and establishes the required criteria of quality to waters according to use.In the present paper, different kinds of tertiary treatments in reuse of wastewater are described. We focused on the applied tertiary treatments in most wastewater treatment plants of Gran Canaria Island. Particularly, we analysed Hoya del Pozo wastewater treatment plant due to its wide number of technologies and processes.Finally, we reviewed the quality criteria used in the regenerated waters, in agreement with the new regulations.     

Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly(butylene succinate)

The blends of poly(l-lactide) (PLLA) with poly(butylene succinate) (PBS) and poly(butylene succinate-co-l-lactate) (PBSL) containing the lactate unit of ca. 3 mol% were prepared by melt-mixing and subsequent injection molding, and their mechanical properties, morphology, and crystallization behavior have been compared. Dynamic viscoelasticity and SEM measurements of the blends revealed that the extent of the compatibility of PBSL and PBS with PLLA is almost the same, and that the PBSL and PBS components in the blends with a low content of PBSL or PBS (5-20 wt%) are homogenously dispersed as 0.1−0.4 μm particles. The tensile strength and modulus of the blends approximately followed the rule of mixtures over the whole composition range except that those of PLLA/PBS 99/1 blend were exceptionally higher than those of pure PLLA. All the blends showed considerably higher elongation at break than pure PLLA, PBSL, and PBS. Differential scanning calorimetric analysis of the blends revealed that the isothermal and non-isothermal crystallization of the PLLA component is promoted by the addition of a small amount of PBSL, while the addition of PBS was much less effective.     

Mechanistic study of electrochemical oxidation of 4-tert-butylcatechol: A facile electrochemical method for the synthesis of new trimer of 4-tert-butylcatechol

The electrochemical trimerization of 4-tert-butylcatechol via anodic oxidation of 4-tert-butylcatechol (1) is described. The mechanism of trimerization has been studied in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The electrochemical synthesis of trimer 3a has been successfully performed in an undivided cell in good yield and purity.     

Broadband dielectric spectroscopic characterization of the hydrolytic degradation of carboxylic acid-terminated poly(d,l-lactide) materials

Broadband dielectric spectroscopy was used to examine carboxylic acid-terminated poly(d,l-lactide) samples that were hydrolytically degraded in 7.4 pH phosphate buffer solutions at 37 °C. The dielectric spectral signatures of degraded samples were considerably more distinct than those of undegraded samples and a T_g-related relaxation associated with long range chain segmental mobility was seen. For both degraded and undegraded samples, a relaxation peak just beneath a DSC-based T_g was observed, which shifts to higher frequency with increasing temperature. Thus, this feature is assigned as the glass transition as viewed from the dielectric relaxation perspective. Linear segments on log-log plots of loss permittivity vs. frequency, in the low frequency regime, are attributed to d.c. conductivity. An upward shift in relaxation peak maximum, f_max, observed especially after 145 d of immersion in buffer, implies a decrease in the time scale of long range segmental motions with increased degradation time.Permittivity data for degraded and undegraded materials were fitted to the Havriliak-Negami equation with subtraction of the d.c. conductivity contribution to uncover pure relaxation peaks. Parameters extracted from these fits were used to construct Vogel-Fulcher-Tammann-Hesse (VFTH) curves and distribution of relaxation time, G(τ), curves for all samples. It was seen that the relaxation times for the α-transition in both degraded and undegraded samples showed VFTH temperature behavior. G(τ) curves showed a general broadening and shift to lower τ with degradation, which can be explained in terms of a broadening of molecular weight within degraded samples and faster chain motions.     

Nafion-assisted deposition of microemulsion-synthesized platinum nanoparticles on BDD: Activation by electrogenerated OH radicals

Platinum nanoparticles have been synthesized by the water-in-oil (w/o) microemulsion technique and deposited onto boron-doped diamond (BDD) electrodes. Transmission electron microscopy (TEM) has shown that Pt particles size is limited to 2-5 nm range with narrow distribution. Anodic treatment at high overpotentials activates Pt deposit that is mechanically stabilized by a Nafion^® layer. Such activation results in enhancement of activity towards methanol electrooxidation, due to additional cleaning of the particles by oxidation of the residual surfactant by electrogenerated hydroxyl radicals.     

Microstructure refinement of alumina: Optimisation by gas pressure sintering process

This paper investigates densification and grain growth evolutions during gas pressure sintering of alumina. Isothermal sintering runs are performed under different nitrogen pressures: atmospheric pressure and 2 MPa. Experimental data are fitted thanks to constitutive laws in order to understand nitrogen pressure effect on densification and grain growth mechanisms of a fine-grained alumina. An optimal run of densification is proposed as an application of these results.