Evaluation of isotopic enrichment factors for the biodegradation of chlorinated ethenes using a parameter estimation model: toward an improved quantification of biodegradation

A model was developed to predict the concentrations of chlorinated ethenes and ethene during sequential reductive dechlorination of tetrachloroethene (PCE) from stable carbon isotope values using Rayleigh model principles and specified isotopic enrichment factors for each step of dechlorination. The model was tested using three separate datasets of concentration and isotope values measured during three experiments involving the degradation of PCE to vinyl chloride (VC), trichloroethene (TCE) to ethene, and cis-1,2-dichloroethene (cDCE) to ethene. The model was then coupled to a parameter estimation method to estimate values for the isotopic enrichment factors of TCE, cDCE, and VC when they are intermediates in the dechlorination to ethene. The enrichment factors estimated for TCE and cDCE when they were intermediates in biodegradation experiments were close to or within the published range of enrichment factors determined from experiments where TCE or cDCE were the initial substrates. In contrast, the enrichment factors determined by parameter estimation for experiments in which VC was an intermediate in biodegradation experiments were consistently more negative (by approximately 10 per thousandth) than the most negative published enrichment factor determined from experiments where VC was the initial substrate. This finding suggests that the range of enrichment factors for VC dechlorination may not be as narrow as previously suggested (-21.5 per thousandth to -26.6 per thousandth) and that fractionation during VC dechlorination when VC is an intermediate compound may be significantly larger than when VC is the initial substrate. These findings have important implications both for the current practice of extrapolating laboratory-derived isotopic enrichment factors to quantify biodegradation of chlorinated ethenes in the field and for understanding the details of enzymatic reductive dechlorination.     

Assessment of degradation pathways in an aquifer with mixed chlorinated hydrocarbon contamination using stable isotope analysis

The demonstration of monitored natural attenuation (MNA) of chlorinated hydrocarbons in groundwater is typically conducted through the evaluation of concentration trends and parent-daughter product relationships along prevailing groundwater flow paths. Unfortunately, at sites contaminated by mixtures of chlorinated ethenes, ethanes, and methanes, the evaluation of MNA by using solely concentration data and parent-daughter relationships can result in erroneous conclusions regarding the degradation mechanisms that are truly active at the site, since many of the daughter products can be derived from multiple parent compounds. Stable carbon isotope analysis was used, in conjunction with concentration data, to clarify and confirm the active degradation pathways at a former waste solvent disposal site where at least 14 different chlorinated hydrocarbons have been detected in the groundwater. The isotope data indicate that TCE, initially believed to be present as a disposed product and/or a PCE dechlorination intermediate, is attributable to dehydrochlorination of 1,1,2,2-PCA. The isotope data further support that vinyl chloride and ethene in the site groundwater result from dichloroelimination of 1,1,2-trichlorethane and 1,2-dichloroethane, respectively, rather than from reductive dechlorination of the chlorinated ethenes PCE, TCE, or 1,2-DCE. The isotope data confirm that the chlorinated ethanes and chlorinated methanes are undergoing significant intrinsic degradation, whereas degradation of the chlorinated ethenes may be limited. In addition to the classical trend of enriched isotope values of the parent compounds with increasing distance associated to biodegradation, shifts of isotope ratios of degradation byproduct in the opposite direction due to mixing of isotopically light byproducts of biodegradation with compounds from the source are shown to be of high diagnostic value. These data underline the value of stable isotope analysis in confirming transformation processes at sites with complex mixtures of chlorinated compounds.     

Stable isotope evidence for biodegradation of chlorinated ethenes at a fractured bedrock site

Stable carbon isotope analysis of chlorinated ethenes and ethene was performed at a site contaminated with trichloroethene (TCE), a dense non-aqueous phase liquid (DNAPL). The site is located in fractured bedrock and had variable groundwater hydraulic gradients during the study due to a local excavation project. Previous attempts to biostimulate a pilot treatment area at the site resulted in the production of cis-1,2-dichloroethene (cis-DCE), the first product of reductive dechlorination of TCE. Cis-DCE concentrations accumulated however, and there was no appreciable production of the breakdown products from further reductive dechlorination, vinyl chloride (VC) and ethene (ETH). Consequently, the pilot treatment area was bioaugmented with a culture of KB-1, a natural microbial consortium known to completely reduce TCE to nontoxic ETH. Due to ongoing dissolution of TCE from DNAPL in the fractured bedrock, and to variable hydraulic gradients, concentration profiles of dissolved TCE and its degradation products cis-DCE, VC, and ETH could not convincingly confirm biodegradation of the chlorinated ethenes. Isotopic analysis of cis-DCE and VC, however, demonstrated that biodegradation was occurring in the pilot treatment area. The isotope values of cis-DCE and VC became significantly more enriched in 13C over the last two sampling dates (in one well from -17.6%o to -12.8%o and from -22.5%o to -18.2%o for cis-DCE and VC, respectively). Quantification of the extent of biodegradation in the pilot treatment area using the Rayleigh model indicated that, depending on the well, between 21.3% and 40.7% of the decrease in cis-DCE and between 15.2% and 36.7% of the decrease in VC concentrations can be attributed to the effects of biodegradation during this time period. Within each well, the isotope profile of TCE remained relatively constant due to the continuous input of undegraded TCE due to DNAPL dissolution.     

Stable carbon isotope fractionation during enhanced in situ bioremediation of trichloroethene

Time-series stable carbon isotope monitoring of volatile organic compounds (VOCs) atthe Idaho National Engineering and Environmental Laboratory's (INEEL) field site Test Area North (TAN) was conducted during a pilot study to investigate the treatment potential of using lactate to stimulate in situ biologic reductive dechlorination of trichloroethene (TCE). The isotope ratios of TCE and its biodegradation byproducts, cis-dichloroethene (c-DCE), trans-dichloroethene (t-DCE), vinyl chloride (VC), and ethene, in groundwater samples collected during the pilot studywere preconcentrated with a combination of purge-and-trap and cryogenic techniques in order to allow for reproducible isotopic measurements of the low concentrations of these compounds in the samples (down to 0.04 microM, or 5 ppb, of TCE). Compound-specific stable isotope monitoring of chlorinated solvents clearly differentiated between the effects of groundwater transport, dissolution of DNAPL at the source, and enhanced bioremediation. Isotope data from all wells within the zone of lactate influence exhibited large kinetic isotope effects during the reduction of c-DCE to VC and VC to ethene. Despite these large effects, the carbon isotope ratio of ethene in all these wells reached the carbon isotope ratios of the initial dissolved TCE, confirming the complete conversion of dissolved TCEto ethene. Conversely, the carbon isotope ratios of t-DCE were only marginally affected during the study, indicating that minimal biologic degradation of t-DCE was occurring.     

Variability in carbon isotopic fractionation during biodegradation of chlorinated ethenes: implications for field applications

Stable carbon isotopic analysis has the potential to assess biodegradation of chlorinated ethenes. Significant isotopic shifts, which can be described by Rayleigh enrichment factors, have been observed for the biodegradation of trichloroethlyene (TCE), cis-dichloroethylene (cDCE), and vinyl chloride (VC). However, until this time, no systematic investigation of isotopic fractionation during perchloroethylene (PCE) degradation has been undertaken. In addition, there has been no comparison of isotopic fractionation by different microbial consortia, nor has there been a comparison of isotopic fractionation by consortia generated from the same source, but growing under different conditions. This study characterized carbon isotopic fractionation during reductive dechlorination of the chlorinated ethenes, PCE in particular, for microbial consortia from two different sources growing under different environmental conditions in order to assess the extent to which different microbial consortia result in different fractionation factors. Rayleigh enrichment factors of -13.8@1000, -20.4@1000, and -22.4@1000 were observed for TCE, cDCE, and VC, respectively, for dechlorination by the KB-1 consortium. In contrast, isotopic fractionation during reductive dechlorination of perchloroethylene (PCE) could not always be approximated by a Rayleigh model. Dechlorination by one consortium followed Rayleigh behavior (epsilon = -5.2), while a systematic change in the enrichment factor was observed over the course of PCE degradation by two other consortia. Comparison of all reported enrichment factors for reductive dechlorination of the chlorinated ethenes shows significant variation between experiments. Despite this variability, these results demonstrate that carbon isotopic analysis can provide qualitative evidence of the occurrence and relative extent of microbial reductive dechlorination of the chlorinated ethenes.     

Field demonstration of successful bioaugmentation to achieve dechlorination of tetrachloroethene to ethene

A laboratory microcosm study and a pilot scale field test were conducted to evaluate biostimulation and bioaugmentation to dechlorinate tetrachloroethene (PCE) to ethene at Kelly Air Force Base. The site groundwater contained about 1 mg/L of PCE and lower amounts of trichloroethene (TCE) and cis-1,2-dichloroethene (cDCE). Laboratory microcosms inoculated with soil and groundwater from the site exhibited partial dechlorination of TCE to cDCE when amended with lactate or methanol. Following the addition of a dechlorinating enrichment culture, KB-1, the chlorinated ethenes in the microcosms were completely converted to ethene. The KB-1 culture is a natural dechlorinating microbial consortium that contains phylogenetic relatives of Dehalococcoides ethenogenes. The ability of KB-1 to stimulate biodegradation of chlorinated ethenes in situ was explored using a closed loop recirculation cell with a pore volume of approximately 64,000 L The pilot test area (PTA) groundwater was first amended with methanol and acetate to establish reducing conditions. Under these conditions, dechlorination of PCE to cDCE was observed. Thirteen liters of the KB-1 culture were then injected into the subsurface. Within 200 days, the concentrations of PCE, TCE, and cis-1,2-DCE within the PTA were all below 5 microg/L, and ethene production accounted for the observed mass loss. The maximum rates of dechlorination estimated from field date were rapid (half-lives of a few hours). Throughout the pilot test period, groundwater samples were assayed for the presence of Dehalococcoides using both a Dehalococcoides-specific PCR assay and 16S rDNA sequence information. The sequences detected in the PTA after bioaugmentation were specific to the Dehalococcoides species in the KB-1 culture. These sequences were observed to progressively increase in abundance and spread downgradient within the PTA. These results confirm that organisms in the KB-1 culture populated the PTA aquifer and contributed to the stimulation of dechlorination beyond cDCE to ethene.     

Hydrogen isotopic enrichment: an indicator of biodegradation at a petroleum hydrocarbon contaminated field site

Compound-specific carbon and hydrogen isotope analysis was used to investigate biodegradation of benzene and ethylbenzene in contaminated groundwater at Dow Benelux BV industrial site. delta13C values for dissolved benzene and ethylbenzene in downgradient samples were enriched by up to 2+/-0.5 per thousand, in 13C, compared to the delta13C value of the source area samples. delta2H values for dissolved benzene and ethylbenzene in downgradient samples exhibited larger isotopic enrichments of up to 27+/-5 per thousand for benzene and up to 50+/-5 per thousand for ethylbenzene relative to the source area. The observed carbon and hydrogen isotopic fractionation in downgradient samples provides evidence of biodegradation of both benzene and ethylbenzene within the study area at Dow Benelux BV. The estimated extents of biodegradation of benzene derived from carbon and hydrogen isotopic compositions for each sample are in agreement, supporting the conclusion that biodegradation is the primary control on the observed differences in carbon and hydrogen isotope values. Combined carbon and hydrogen isotope analyses provides the ability to compare biodegradation in the field based on two different parameters, and hence provides a stronger basis for assessment of biodegradation of petroleum hydrocarbon contaminants.     

Quantification of sequential chlorinated ethene degradation by use of a reactive transport model incorporating isotope fractionation

Compound-specific isotope analysis (CSIA) enables quantification of biodegradation by use of the Rayleigh equation. The Rayleigh equation fails, however, to describe the sequential degradation of chlorinated aliphatic hydrocarbons (CAHs) involving various intermediates that are controlled by simultaneous degradation and production. This paper shows how isotope fractionation during sequential degradation can be simulated in a 1D reactive transport code (PHREEQC-2). 12C and 13C isotopes of each CAH were simulated as separate species, and the ratio of the rate constants of the heavy to light isotope equaled the kinetic isotope fractionation factor for each degradation step. The developed multistep isotope fractionation reactive transport model (IF-RTM) adequately simulated reductive dechlorination of tetrachloroethene (PCE) to ethene in a microcosm experiment. Transport scenarios were performed to evaluate the effect of sorption and of different degradation rate constant ratios among CAH species on the downgradient isotope evolution. The power of the model to quantify degradation is illustrated for situations where mixed sources degrade and for situations where daughter products are removed by oxidative processes. Finally, the model was used to interpret the occurrence of reductive dechlorination at a field site. The developed methodology can easily be incorporated in 3D solute transport models to enable quantification of sequential CAH degradation in the field by CSIA.     

Reductive dechlorination of carbon tetrachloride and tetrachloroethylene by zerovalent silicon-iron reductants

Reductive dechlorination of carbon tetrachloride (CT) and tetrachloroethylene (PCE) by zerovalent silicon (ZVS, Si0) and the combination of Si0 with metal iron (Fe0) was investigated as potential reductants for chlorinated hydrocarbons. The X-ray photoelectron spectroscopy (XPS) was used to identify the surface characteristics of Si0. CT and PCE can be completely degraded via sequential reductive dechlorination to form lesser chlorinated homologues by Si0. Productions of chloroform (CF) and trichloroethylene (TCE) accounted for 80% of CT and 65% of PCE dechlorination, respectively. The degradation of CT and PCE by Si0 at pH 8.3 followed pseudo-first-order kinetics, and the normalized surface rate constants (k(sa)) were 0.288 and 0.003 L m(-2) h(-1), respectively, which react more efficiently than zerovalent iron in CT and PCE dechlorination. A linear relationship was also established between pH and the k(sa) value. The XPS results showed that the hydrogenated silicon surface and silicon oxides on the silicon surface were removed during the dechlorination processes, thus providing a relatively clean silicon surface for dechlorination reactions. The combination of zerovalent silicon with iron influences both the dechlorination rate and the distribution of products. Sequential reductive dechlorination was still the main reaction for CT dechlorination by Si0/Fe0, while reductive dechlorination and beta-elimination were the dominant reaction pathways for PCE dechlorination with ethane and ethene as the major end products. Also, the combination of silicon and iron constitutes a buffer system to maintain the pH at a stable value. A 0.3 unit of pH changed upon increasing the amount of Fe by a factor of 35 was observed, depicting that Si0 serves as a pH buffer in Si0/Fe0 system during dechlorination processes.     

Isotopic and geochemical assessment of in situ biodegradation of chlorinated hydrocarbons

Currently there is no in situ method to detect and quantify complete mineralization of chlorinated hydrocarbons (CHCs) to CO2. Combined isotopic measurements in conjunction with traditional chemical techniques were used to assess in situ biodegradation of trichloroethylene (TCE) and carbon tetrachloride (CT). Vadose zone CHC, ethene, ethane, methane, O2, and CO2 concentrations were analyzed using gas chromatography over 114 days at the Savannah River Site. delta13C of CHC and delta13C and 14C of vadose zone CO2, sediment organic matter, and groundwater dissolved inorganic carbon (DIC)were measured. Intermediate metabolites of TCE and CT accounted for < or = 10% of total CHCs. Delta13C of cis-1,2-dichloroethylene (DCE) was always heavier than TCE indicating substantial DCE biodegradation. 14C-CO2 values ranged from 84 to 128 percent modern carbon (pMC), suggesting that plant root-respired CO2 was dominant. 14C-CO2 values decreased over time (up to 12 pMC), and contaminated groundwater 14C-DIC (76 pMC) was substantially depleted relative to the control (121 pMC). 14C provided a direct measure of complete CHC mineralization in vadose zone and groundwater in situ and may improve remediation strategies.     

Distinguishing abiotic and biotic transformation of tetrachloroethylene and trichloroethylene by stable carbon isotope fractionation

Significant carbon isotope fractionation was observed during FeS-mediated reductive dechlorination of tetrachloroethylene (PCE) and trichloroethylene (TCE). Bulk enrichment factors (E(bulk)) for PCE were -30.2 +/- 4.3 per thousand (pH 7), -29.54 +/- 0.83 per thousand (pH 8), and -24.6 +/- 1.1 per thousand (pH 9). For TCE, E(bulk) values were -33.4 +/- 1.5 per thousand (pH 8) and -27.9 +/- 1.3 per thousand (pH 9). A smaller magnitude of carbon isotope fractionation resulted from microbial reductive dechlorination by two isolated pure cultures (Desulfuromonas michiganensis strain BB1 (BB1) and Sulfurospirillum multivorans (Sm)) and a bacterial consortium (BioDechlor INOCULUM (BDI)). The E(bulk) values for biological PCE microbial dechlorination were -1.39 +/- 0.21 per thousand (BB1), -1.33 +/- 0.13 per thousand (Sm), and -7.12 +/- 0.72 per thousand (BDI), while those for TCE were -4.07 +/- 0.48 per thousand (BB1), -12.8 +/- 1.6 per thousand (Sm), and -15.27 +/- 0.79 per thousand (BDI). Reactions were investigated by calculation of the apparent kinetic isotope effect for carbon (AKIEc), and the results suggest that differences in isotope fractionation for abiotic and microbial dechlorination resulted from the differences in rate-limiting steps during the dechlorination reaction. Measurement of more negative E(bulk) values at sites contaminated with PCE and TCE may suggest the occurrence of abiotic reductive dechlorination by FeS.     

Quantifying the effects of 1,1,1-trichloroethane and 1,1-dichloroethane on chlorinated ethene reductive dehalogenases

Mixtures of chlorinated ethenes and ethanes are often found at contaminated sites. In this study, we undertook a systematic investigation of the inhibitory effects of 1,1,1-trichloroethane (1,1,1-TCA) and 1,1-dichloroethane (1,1-DCA) on chlorinated ethene dechlorination in three distinct Dehalococcoides-containing consortia. To focus on inhibition acting directly on the reductive dehalogenases, dechlorination assays used cell-free extracts prepared from cultures actively dechlorinating trichloroethene (TCE) to ethene. The dechlorination assays were initiated with TCE, cis-1,2-dichloroethene (cDCE), or vinyl chloride (VC) as substrates and either 1,1,1-TCA or 1,1-DCA as potential inhibitors. 1,1,1-TCA inhibited VC dechlorination similarly in cell suspension and cell-free extract assays, implicating an effect on the VC reductases associated with the dechlorination of VC to nontoxic ethene. Concentrations of 1,1,1-TCA in the range of 30-270 μg/L reduced VC dechlorination rates by approximately 50% relative to conditions without 1,1,1-TCA. 1,1,1-TCA also inhibited reductive dehalogenases involved in TCE and cDCE dechlorination. In contrast, 1,1-DCA had no pronounced inhibitory effects on chlorinated ethene reductive dehalogenases, indicating that removal of 1,1,1-TCA via reductive dechlorination to 1,1-DCA is a viable strategy to relieve inhibition.     

Monitoring biodegradation of ethene and bioremediation of chlorinated ethenes at a contaminated site using compound-specific isotope analysis (CSIA)

Chlorinated ethenes are commonly found in contaminated groundwater. Remediation strategies focus on transformation processes that will ultimately lead to nontoxic products. A major concern with these strategies is the possibility of incomplete dechlorination and accumulation of toxic daughter products (cis-1,2-dichloroethene (cDCE), vinyl chloride (VC)). Ethene mass balance can be used as a direct indicator to assess the effectiveness of dechlorination. However, the microbial processes that affect ethene are not well characterized and poor mass balance may reflect biotransformation of ethene rather than incomplete dechlorination. Microbial degradation of ethene is commonly observed in aerobic systems but fewer cases have been reported in anaerobic systems. Limited information is available on the isotope enrichment factors associated with these processes. Using compound-specific isotope analysis (CSIA) we determined the enrichment factors associated with microbial degradation of ethene in anaerobic microcosms (ε = -6.7‰ ± 0.4‰, and -4.0‰ ± 0.8‰) from cultures collected from the Twin Lakes wetland area at the Savannah River site in Georgia (United States), and in aerobic microcosms (ε = -3.0‰ ± 0.3‰) from Mycobacterium sp. strain JS60. Under anaerobic and aerobic conditions, CSIA can be used to determine whether biotransformation of ethene is occurring in addition to biodegradation of the chlorinated ethenes. Using δ(13)C values determined for ethene and for chlorinated ethenes at a contaminated field site undergoing bioremediation, this study demonstrates how CSIA of ethene can be used to reduce uncertainty and risk at a site by distinguishing between actual mass balance deficits during reductive dechlorination and apparent lack of mass balance that is related to biotransformation of ethene.     

Monitoring oxidation of chlorinated ethenes by permanganate in groundwater using stable isotopes: laboratory and field studies

Permanganate injection is increasingly applied for in situ destruction of chlorinated ethenes in groundwater. This laboratory and field study demonstrates the roles that carbon isotope analysis can play in the assessment of oxidation of trichloroethene (TCE) by permanganate. In laboratory experiments a strong carbon isotope fractionation was observed during oxidation of TCE with similar isotopic enrichment factors (-25.1 to -26.8 per thousand) for initial KMnO4 concentrations between 67 and 1,250 mg/L. At the field site, a single permanganate injection episode was conducted in a sandy aquifer contaminated with TCE as dense nonaqueous liquid (DNAPL). After injection, enriched delta13C values of up to +204% and elevated Cl- concentrations were observed at distances of up to 4 m from the injection point. Farther away, the Cl- increased without any change in delta13C of TCE suggesting that Cl- was not produced locally but migrated to the sampling point Except for the closest sampling location to the injection point, the delta13C rebounded to the initial 613C again, likely due to dissolution of DNAPL Isotope mass balance calculations made it possible to identify zones where TCE oxidation continued to occur during the rebound phase. The study indicates that delta13C values can be used to assess the dynamics between TCE oxidation and dissolution and to locate zones of oxidation of chlorinated ethenes that cannot be identified from the Cl- distribution alone.     

Carbon isotope fractionation during permanganate oxidation of chlorinated ethylenes (cDCE,TCE, PCE)

Permanganate oxidation of chlorinated ethylenes is an attractive technique to effect remediation of these important groundwater contaminants. Stable carbon isotope fractionation associated with permanganate oxidation of trichloroethylene (TCE), tetrachloroethylene (PCE), and cis-1,2-dichloroethylene (cDCE) has been measured, to study the possibility of applying stable carbon isotope analysis as a technique to assess the efficacy of remediation implemented by permanganate oxidation. Average carbon isotope fractionation factors of alphaTCE = 0.9786, alphaPCE = 0.9830, and alphacDCE = 0.9789 were obtained, although the fractionation factor for PCE may be interpreted to change from a value of 0.9779-0.9871 during the course of the reaction. The fractionation factors for all three compounds are quite similar, in contrast to the variation of fractionation factors vs degree of chlorination observed for other degradative processes, such as microbial dechlorination. This may be due to a common rate-determining step for permanganate oxidation of all three compounds studied. The large fractionation factors and the relative lack of dependence of the fractionation factors upon other environmental factors (e.g. oxidation rate, presence of multiple contaminants, incomplete oxidation, presence of chloride in solution) indicate that monitoring delta13C values of chlorinated ethylenes during oxidation with permanganate may be a sensitive, and potentially quantitative, technique to investigate the extent of degradation.     

Radiolytic and thermal dechlorination of organic chlorides adsorbed on molecular sieve 13X

Reductive dechlorination of chlorobenzene (PhCl), trichloroethylene (TCE), tetrachloroethylene (PCE), 1- and 2-chlorobutanes, chloroform, carbon tetrachloride, and 1,1,1- and 1,1,2-trichloroethanes adsorbed on molecular sieve 13X was investigated. The molecular sieve adsorbing the organic chlorides was irradiated with gamma-rays, heated, or allowed to stand at room temperature in a sealed ampule and was then soaked in water. The dechlorination yields were determined from the Cl- concentrations of the supernatant aqueous solutions. It was found that the chlorinated alkanes adsorbed on the molecular sieve are readily dechlorinated on standing at room temperature. The dechlorination at room temperature was limited for TCE and PCE. PhCl was quite stable even at 200 degrees C. gamma-Radiolysis was examined for PhCl, TCE, and PCE at room temperature. The radiation chemical yields of the dechlorination, G(Cl-), were 1.9, 40, and 30 for PhCl, TCE, and PCE, respectively. After 5 h of heating at 200 degrees C, the dechlorination yields for TCE and PCE were 24.5 and 4.3%, respectively. TCE is much more reactive than PCE in the thermal dechlorination, whereas their radiolytic dechlorination yields are comparable. The pH of the supernatant solutions decreased along with the dechlorination.     

Acetate versus hydrogen as direct electron donors to stimulate the microbial reductive dechlorination process at chloroethene-contaminated sites

A study to evaluate the dechlorination end points and the most promising electron donors to stimulate the reductive dechlorination process at the chloroethene-contaminated Bachman Road site in Oscoda, MI, was conducted. Aquifer materials were collected from inside the plume and used to establish microcosms under a variety of electron donor conditions using chlorinated ethenes as electron acceptors. All microcosms that received an electron donor showed dechlorination activity, but the end points depended on the sampling location, indicating a heterogeneous distribution of the dechlorinating populations in the aquifer. Interestingly, several microcosms that received acetate as the only electron donor completely dechlorinated PCE to ethene. All acetate-amended microcosms rapidly converted PCE to cis-DCE, whereas PCE dechlorination in H2-fed microcosms only occurred after a pronounced lag time and after acetate had accumulated by H2/CO2 acetogenic activity. The microcosm experiments were corroborated by defined co-culture experiments, which demonstrated that H2 sustained PCE to cis-DCE dechlorination by acetotrophic populations in the presence of H2/CO2 acetogens. In sediment-free nonmethanogenic enrichment cultures derived from ethene-producing microcosms, acetate alone supported complete reductive dechlorination of chloroethenes to ethene, although the addition of H2 resulted in higher cis-DCE and VC dechlorination rates. Measurements of H2 production and consumption suggested that syntrophic acetate-oxidizing population(s) were active in the enrichment cultures. These findings demonstrated that either acetate or H2 alone can be sufficient to promote complete     

Anaerobic biodegradation of ethylene dibromide and 1,2-dichloroethane in the presence of fuel hydrocarbons

Field evidence from underground storage tank sites where leaded gasoline leaked indicates the lead scavengers 1,2-dibromoethane (ethylene dibromide, or EDB) and 1,2-dichloroethane (1,2-DCA) may be present in groundwater at levels that pose unacceptable risk. These compounds are seldom tested for at UST sites. Although dehalogenation of EDB and 1,2-DCA is well established, the effect of fuel hydrocarbons on their biodegradability under anaerobic conditions is poorly understood. Microcosms (2 L glass bottles) were prepared with soil and groundwater from a UST site in Clemson, South Carolina, using samples collected from the source (containing residual fuel) and less contaminated downgradient areas. Anaerobic biodegradation of EDB occurred in microcosms simulating natural attenuation, but was more extensive and predictable in treatments biostimulated with lactate. In the downgradient biostimulated microcosms, EDB decreased below its maximum contaminant level (MCL) (0.05 microg/L) at a first order rate of 9.4 +/- 0.2 yr(-1). The pathway for EDB dehalogenation proceeded mainly by dihaloelimination to ethene in the source microcosms, while sequential hydrogenolysis to bromoethane and ethane was predominant in the downgradient treatments. Biodegradation of EDB in the source microcosms was confirmed by carbon specific isotope analysis, with a delta13C enrichment factor of -5.6 per thousand. The highest levels of EDB removal occurred in microcosms that produced the highest amounts of methane. Extensive biodegradation of benzene, ethylbenzene, toluene and ortho-xylene was also observed in the source and downgradient area microcosms. In contrast, biodegradation of 1,2-DCA proceeded at a considerably slower rate than EDB, with no response to lactate additions. The slower biodegradation rates for 1,2-DCA agree with field observations and indicate that even if EDB is removed to below its MCL, 1,2-DCA may persist.     

Reductive dechlorination of tetrachloroethene to trans-dichloroethene and cis-dichloroethene by PCB-dechlorinating bacterium DF-1

Polychlorinated biphenyls (PCBs) and chlorinated ethenes (CEs) are known to pollute sediment, soil, and groundwater. The anaerobic dechlorination of these compounds is an integral part of their biodegradation in polluted environments. We report for the first time the dechlorination of tetrachloroethene (PCE) and trichloroethene (TCE) by bacterium DF-1. This PCB and chlorobenzene dechlorinating bacterium dechlorinated PCE to TCE, which was then converted into trans-1,2-dichloroethene (trans-DCE) and cis-1,2-dichloroethene (cis-DCE). The ratio of trans-DCE to cis-DCE produced by the culture had a range of 1.2-1.7. Bacterium DF-1 has been enriched in co-culture with a desulfovibrio-like microorganism. PCR-denaturing gradient gel electrophoresis (PCR-DGGE) analysis of the 16S rRNA genes of the co-culture demonstrated that DF-1 was enriched during the dechlorination of PCE, PCB, and chlorobenzene. DF-1 was not detected in the absence of PCE dechlorination and the desulfovibrio-like organism, isolated in pure culture, did not dechlorinate PCE. This is the first identification of a microorganism capable of producing high amounts of trans-DCE from PCE and indicates that microorganisms such as DF-1 are a possible biological source of trans-DCE in the environment.     

Investigating the role of atomic hydrogen on chloroethene reactions with iron using tafel analysis and electrochemical impedance spectroscopy

Metallic iron filings are commonly employed as reducing agents in permeable barriers used for remediating groundwater contaminated by chlorinated solvents. Reactions of trichloroethylene (TCE) and tetrachloroethylene (PCE) with zerovalent iron were investigated to determine the role of atomic hydrogen in their reductive dechlorination. Experiments simultaneously measuring dechlorination and iron corrosion rates were performed to determine the fractions of the total current going toward dechlorination and hydrogen evolution. Corrosion rates were determined using Tafel analysis, and dechlorination rates were determined from rates of byproduct generation. Electrochemical impedance spectroscopy (EIS) was used to determine the number of reactions that controlled the observed rates of chlorocarbon disappearance, as well as the role of atomic hydrogen in TCE and PCE reduction. Comparison of iron corrosion rates with those for TCE reaction showed that TCE reduction occurred almost exclusively via atomic hydrogen at low pH values and via atomic hydrogen and direct electron transfer at neutral pH values. In contrast, reduction of PCE occurred primarily via direct electron transfer at both low and neutral pH values. At low pH values and micromolar concentrations, TCE reaction rates were faster than those for PCE due to more rapid reduction of TCE by atomic hydrogen. At neutral pH values and millimolar concentrations, PCE reaction rates were faster than those for TCE. This shift in relative reaction rates was attributed to a decreasing contribution of the atomic hydrogen reaction mechanism with increasing halocarbon concentrations and pH values. The EIS data showed that all the rate limitations for TCE and PCE dechlorination occurred during the transfer of the first two electrons. Results from this study show that differences in relative reaction rates of TCE and PCE with iron are dependent on the significance of the reduction pathway involving atomic hydrogen.