Design and Implementation of An Active Multibeam Antenna System with 64 RF Channels and 256 Antenna Elements for Massive MIMO Application in 5G Wireless Communications

This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications. The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements. The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.     

Long-Range VNA-Based Channel Sounder: Design and Measurement Validation at MmWave and Sub-THz Frequency Bands

With the increasing demand for high bandwidth wireless communication systems, and with a congested spectrum in the sub-6 GHz frequency bands, researchers have been looking into exploration of millimeter wave(mmWave) and sub-terahertz(subTHz) frequency bands. Channel modeling is essential for system design and performance evaluation of new wireless communication systems. Accurate channel modeling relies on reliable measured channel data,which is collected by high-fidelity channel sounders.Further...     

一个双频带可重构的直接变频接收机射频前端

A dual-band reconfigurable wireless receiver RF front-end is presented, which is based on the directconversion principle and consists of a low noise amplifer （LNA） and a down-converter. By utilizing a compact switchable on-chip symmetrical inductor, the RF front-end could be switched between two operation frequency bands without extra die area cost. This RF front-end has been implemented in the 180 nm CMOS process and the measured results show that the front-end could provide a gain of 25 dB and IIP3 of 6 dBm at 2.2 GHz, and a gain of 18.8 dB and IIP3 of 7.3 dBm at 4.5 GHz. The whole front-end consumes 12 mA current at 1.2 V voltage supply for the LNA and 2.1 mA current at 1.8 V for the mixer, with a die area of 1.2 × 1 mm^2.     

未来中国4G开放移动通信终端和网络接入架构

This paper relates to an advanced open mobile communication system and method of integrating the mobile communications, wireless access systems and wired communications into one common platform architecture for China＇s 4th generation mobile communications, supporting costeffective broadband voice, data and video services in wireless, mobile and wired environment with one single integrated mobile terminal device. The paper includes new architecture in the integrated mobile device and converged network access, and minimum modification in the existing mobile telecommunication infrastructures. This paper introduces the long-term evolution strategy for China＇s TDD system platform towards China＇s future 4G mobile communications.     

A Miniature Telemetric System for Freely Roaming Animals

Telemetric monitoring and control are the two critical aspects for a robot-rat. Development in this work is a telemetric system to record the electroencephalogram （EEG） from adult freely roaming animals. The system consists of two separated components： the transmit-end system, which consists of the preamplifier, the LPF （low-pass filter） and the transmitter, and the receive-end system, which consists of the receiver, the interface of receive-end and PC. The transmit-end system with light weight （10 g including battery） and small size （20 mm×50 mm） is fettered on the back of the rat. The EEG signal is modulated at the RF frequency of 2.4 GHz by nRF24E1 and transmitted by the antenna. The system can measure the EEG signal of the rat in freely roaming over a wireless transmission distance up to 8 m, and provide a new platform for behavioral and neurophysiological experiments.     

Research on Silicon-Based Terahertz Communication Integrated Circuits

With the increasing number of users and emerging new applications, the demand for mobile data traffic is growing rapidly. The limited spectrum resources of the traditional microwave and millimeter-wave frequency bands can no longer support the future wireless communication systems with higher system capacity and data throughput. The terahertz(THz) frequency bands have abundant spectrum resources, which can provide sufficient bandwidth to expand channel capacity and increase transmission data rat...     

Sub-Terahertz Channel Sounder: Review and Future Challenges

Due to the large amount of unused and unexplored spectrum resources, the so-called subTerahertz(sub-THz) frequency bands from 100 to 300 GHz are seen as promising bands for the next generation of wireless communication systems. Channel modeling at sub-THz bands is essential for the design and deployment of future wireless communication systems. Channel measurement is a widely adopted method to obtain channel characteristics and establish mathematical channel models. Channel measurements depend o...     

A fractional-N frequency synthesizer-based multi-standard I/Q carrier generation system in 0.13μm CMOS

This paper proposes a sigma-delta fractional-N frequency synthesizer-based multi-standard I/Q carrier generation system.With reasonable frequency planning,the system can be used in multi-standard wireless communication applications(GSM,WCDMA,GPRS,TD-SCDMA,WLAN(802.11a/b/g)).The implementation is achieved by a 0.13μm RF CMOS process.The measured results demonstrate that three quadrature VCOs(QVCO) continuously cover the frequency from 3.1 to 6.1 GHz(65.2%),and through the successive divide-by-2 prescalers to achieve the frequency from 0.75 to 6.1 GHz continuously.The chip was fully integrated with the exception of an off-chip filter.The entire chip area is only 3.78 mm~2,and the system consumes a 21.7 mA@1.2 V supply without output buffers.The lock-in time of the PLL frequency synthesizer is less than 4μs over the entire frequency range with a direct frequency presetting technique and the auxiliary non-volatile memory(NVM)can store the digital configuration signal of the system,including presetting signals to avoid the calibration process case by case.     

8.64-11.62 GHz CMOS VCO and divider in a zero-IF 802.11a/b/g WLAN and Bluetooth application

A fully integrated VCO and divider implemented in SMIC 0.13-μm RFCMOS 1P8M technology with a 1.2 V supply voltage is presented.The frequency of the VCO is tuning from 8.64 to 11.62 GHz while the quadrature LO signals for 802.11a WLAN in 5.8 GHz band or for 802.11b/g WLAN and Bluetooth in 2.4 GHz band can be obtained by a frequency division by 2 or 4,respectively.A 6 bit switched capacitor array is applied for precise tuning of all necessary frequency bands.The testing results show that the VCO has a phas...     

An Access Selection Functional Architecture for Heterogeneous Multi-Mode Terminals

The convergence of heterogeneous wireless networks is an inevitable trend in broadband wireless communications development. In heterogeneous networks convergence environment, each wireless network can provide ubiquitous, best Quality of Service (QoS) services. The challenge lies in the design of the management system and access selection architecture for heterogeneous multi-mode terminals. A type of management architecture for heterogeneous multi-mode terminal via effective interaction with all protocol layers is adaptable for multi-access standards and technical requirements to achieve seamless access and mobility for multi-mode heterogeneous terminals. As the core subject for research, access selection functional architecture mainly consists of three modules, namely access adaptation, mobility management, and user preference.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks