共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
研制一种由苯乙烯、丙烯酸酯、特种单体共聚而成的水性交联型环保胶粘剂,该胶粘剂可与水泥、砂子混合组成聚合物水泥胶浆用于外墙保温体系。 相似文献
4.
5.
靖江市特种粘合剂厂研究所近年开发出一种可喷涂的聚氨酯胶粘剂,它的牌号为MPU - 2 0 1型单组分聚氨酯胶。固化速度可根据用户要求提供,该胶适合机械化流水线复合工艺。广泛用于制门业、冷藏设备、轻质建材中各种板材与防火、保温材料(岩棉、陶瓷棉、超细玻璃棉、聚苯乙烯泡沫塑料等)的粘合一种可喷涂的聚氨酯胶粘剂@甲一 相似文献
6.
7.
8.
在机电设备维修(连接补强堵漏等)作业中,选择适当场合以粘代焊,显示了胶接工艺操作简便、受力均匀、省力、省时、省材料、效益高的优良特性。目前胶粘剂和胶接技术倍受人们的欢迎和重视,获得广泛深入的发展是很自然的事。在实际应用环氧胶修复设备实例中我们针对工况和具体条件选用不同的胶粘剂,有时采用复合胶接,有时采取焊接与胶接综合处理,在设备维修中取得显著成效。本文介绍应用环氧胶粘剂和改性丙烯酸酯胶粘剂维修设备的部分实例。用环氧胶维修设备的实例见表1。 相似文献
9.
10.
液态光学胶作为一种广泛用于透明光学元件粘接及光学填充的特种胶粘剂组合物,其具有高可靠性、低固化收缩、固化后折射率接近1.5、能满足多重固化工艺需求等特点。作为当今触摸屏产品的关键原材料,笔者对已公开液态光学胶相关专利技术进行了分析研究,以期为相关产业研究提供参考。 相似文献
11.
介绍了胶粘剂在浮空器上的应用,分析了浮空器囊体粘接用胶粘剂基本要求,然后对浮空器国产专用胶粘剂和某进口胶粘剂进行初粘性、胶接强度、耐高温性能及老化性能对比试验研究,最后根据试验结果阐述了国产胶粘剂的综合性能相对进口胶粘剂存在的不足,为提升国产浮空器囊体粘接用胶粘剂综合性能提供一定的参考。 相似文献
12.
介绍了光学用透明胶粘剂的性能特点及分类,重点介绍了合成树脂胶粘剂。合成树脂胶粘剂由于粘接强度高,耐高低温性好,能在振动、辐射等苛刻条件下工作,逐渐成为主要的光学透明胶粘剂。重点介绍了合成树脂胶粘剂中的环氧树脂胶粘剂和光固化胶粘剂。探讨了环境因素对胶粘剂光学性能的影响,并且指出环氧树脂和光固化胶粘剂是未采光学透明胶粘剂的发展方向。 相似文献
13.
14.
Zhiwei Wang Lijia Liu Yonghe Li Hongxing Dong Zeming Chen 《Journal of Adhesion Science and Technology》2019,33(16):1770-1789
In the case of bonding of aluminum alloy, surface pretreatment have been widely adopted for adherends so as to achieve superior adhesive performance. However, the strict surface treatment of the aluminum alloy cannot be implemented without special equipment and the mechanical properties, corrosion resistance and aging resistance of the common adhesives cannot meet the demand without surface treatment. Here, acrylic oligomer modified by carboxyl terminated organosilicon and nano alumina were used to modify an epoxy formulation based on a classical DGEBA monomer to produce a high peel strength epoxy adhesive that can be used without surface pretreatment. The peel strength and the shear strength of the adhesive could reach 7.18?N/cm and 18.75?MPa, respectively, and could be well maintained under ?70?°C and 100?°C. The novel adhesive also has good heat aging resistance, water resistance and artificial seawater resistance. SEM and XPS were used to investigate mechanism of aging resistance of modified adhesives without surface treatment. 相似文献
15.
16.
软包装用聚氨酯胶黏剂发展近况 总被引:1,自引:0,他引:1
叶青萱 《化学推进剂与高分子材料》2011,9(1):21-30,39
简要介绍了软包装及所用聚氨酯(PU)复膜胶的迅猛发展历程.分别介绍了溶剂PU胶黏剂、醇溶PU胶黏剂、无溶剂PU胶黏剂和水性PU(WPU)胶黏剂的发展概况及其优缺点.随着技术进步和环保意识的增强,PU复膜胶由溶剂型逐步向无溶剂、水性方向发展.还介绍了将丙烯酸酯基团引入WPU主链以降低成本、改进某种性能、引人双键等方面的研... 相似文献
17.
Xiaohua KongGuoguang Liu Jonathan M. Curtis 《International Journal of Adhesion and Adhesives》2011,31(6):559-564
A novel bio-based poly (ether ester) polyol containing both primary and secondary functional groups was synthesized from canola oil using a low cost and efficient procedure. In this work, use of the new canola oil derived polyol for the production of polyurethane (PU) adhesives was demonstrated. The canola oil based PU adhesives had similar or better adhesive properties in terms of lap shear strength than three commercial PU adhesives. The effect of NCO/OH ratio and temperature on adhesive characteristics on wood bonding was also evaluated by lap shear tests. It was found that the use of an elevated curing temperature (i.e. 100 °C), as well as optimized NCO/OH molar ratio (higher than 1.5/1.0), improved the wood adhesive properties. The overall chemical resistance of bio-based PU adhesives to cold water, acid and alkali was comparable to that of commercial PU adhesives whilst its resistance to hot water was superior. 相似文献
18.
Makoto Imanaka Masaki Omiya Noriaki Taguchi 《Journal of Adhesion Science and Technology》2019,33(6):646-659
Structural acrylic adhesives are of special interest because those adhesives are cured at room temperature and can be bonded to oily substrates. To use those adhesives widely for structural bonding, it is necessary to clarify the methodology for predicting strengths of bonding structures with those adhesives. Recently, cohesive zone models (CZMs) have been receiving intensive attentions for simulation of fracture strengths of adhesive joints, especially when bonded with ductile adhesives. The traction-separation laws under mode I and mode II loadings require to estimate fracture toughness of adhesively bonded joints. In this paper, the traction-separation laws of an acrylic adhesive in mode I and mode II were directly obtained from experiments using Arcan type adhesively bonded specimens. The traction-separation laws were determined by simultaneously recording the J-integral and the opening displacements in the directions normal and tangential to the adhesive layer, respectively. 相似文献
19.
20.
Recent adhesive technologies have focused on the development of high-quality and eco-friendly adhesives. Thus, there is a gradual shift from the currently used chemical-based adhesives toward harmless adhesives with improved quality and performance. Here, we evaluated the potential use of bacteria-produced recombinant mussel adhesive protein (MAP) as a harmless wood furniture adhesive. We formulated a MAP wood adhesive as an inclusion body type for economical preparation, and we confirmed its harmlessness through the non-detection of volatile organic compounds and heavy metals. The formulated MAP showed sufficiently strong bulk adhesive strength for the dried gluing of wood adherends. We also found that the formulated MAP wood adhesive exhibits robust adhesion in various environmental conditions, including open assembly times, incubation times, temperatures, and humidity levels. In summary, the developed recombinant MAP could be successfully used as a promising environmentally-friendly, harmless wood furniture adhesive. 相似文献