Scientific innovation in bibliographical databases: A comparative study of the science citation index and the pascal database

This study compares information obtained from the INIST/CNRS bibliographical database PASCAL with that found in theAtlas of Science published by ISI. The goal of the comparison was to contribute, to a better understanding of how databases can be used to carry out fine-grained studies of social and cognitive factors which affect the definition of a scientific research program. The program studied concern the development of research on brushborder cell membranes.     

Influence of publication languages on the citation rate of scientific articles: A case study of East German journals

In order to quantify the influence of publication languages on the rate of citation of scientific articles, such East German journals from the Science Citation Index database were selected which publish relevant shares of contributions in several languages, especially in English and German. For a fixed period of time (1988) the selective citation impact of both English- and German-language articles was calculated. The results of our investigation reveal a non-uniform picture: In some cases English-language papers exhibit a significantly higher citations-per-paper average than German-language articles, but in a few cases German-language publications achieve a higher mean citation rate. For the half of selected journals there does not exist a statistically significant difference of citation frequencies of publications in both languages. Possible causes of these phenomena (editorial practice of journals, native countries of authors) are considered.     

Experiences with the national citation reports database for measuring national performance: The case of Mexico

The National Citation Report (NCR) is an integrated citation file supplied by the Institute for Scientific Information (ISI), of an individual country's articles in science and social sciences. Our experience with the NCR database for Mexico suggests that this is an important addition to the tools available for carrying out bibliometric analysis of research performance. However, in order to generate reliable and accurate indicators using these datafiles we recommend that these be handled by specialists well acquainted with the ISI information products and with the scientific setup of the country concerned.     

The impact of qualitative methods on article citation: an international business research perspective

Scientometrics - Qualitative methods have traditionally been underused in international business, and their research potential in this area has not been widely investigated. The main objective of...     

Categorization and trend of materials science research from Science Citation Index (SCI) database: A case study of ceramics,metallurgy, and polymer subfields

This article offers information on the characteristics and number of materials research articles indexed in the Science Citation Index (SCI) database in the year of 2004. 22,843 articles in full-text forms from 169 journals from the materials field (which included ceramics, metallurgy, and polymer journals) were retrieved from the SCI database and exported to EndNote software. The retrieved articles were carefully analyzed by eight scientists and experts in those subfields and categorized using SPSS into eight different categories, being (1) New materials, (2) Materials characterizations, (3) Materials improvement, (4) New process and/or process improvement, (5) Mathematical and theoretical models and/or computer simulations, (6) Novel and comprehensive explanations, (7) Testing conditions, and (8) Comparative studies, whose definitions were clearly indicated. The results were then considered in terms of the percentage of the number of articles in each materials subfield, country of corresponding author, and number of authors. The overall results suggested that, most materials articles published in 2004 were focused on new process and process improvement (27%), while materials characterizations (23%) and testing conditions (12%) took the 2nd and 3rd places, especially for the ceramics and polymer articles. The highest numbers of articles in the ceramics and polymer subfields were focused on new processes and/or process improvement, and those for the metallurgy subfield were on materials characterization. In the SCI database, the largest number of materials articles was authored from Asian scientists although the majority of the materials journals were run by editors from Europe in North America/Canada continents. There was no coherent relationship between the authors’ and editors’ affiliations. China, Japan and the United States of America (USA) were shown to be the top three countries which had the highest publication numbers in the materials field. Japan had the highest publication numbers in the ceramics subfield while China possessed most publications in polymer and metallurgy subfields. However, when considering the journal impact factors, the leading positions of the countries changed. The results from this work could assist materials scientists to select suitable international journals in relevant association with the contents of their to-publish works. Finally, it was noted that most material research articles were written by 3–4 authorships.     

Correlation study between citation count and Mendeley readership of the articles of Sri Lankan authors

Scientometrics - In this paper, the correlation of the citation count and Mendeley readership score of the articles by the Sri Lankan authors was studied. The study presents how the correlation...     

Evidence-based recommendations for increasing the citation frequency of original articles

Scientometrics - Publications and citations are important for career advancement of researchers. Our main aim was to derive recommendations that might increase the citation frequency of...     

Weak evidence for determinants of citation frequency in ecological articles

Citation frequency has been considered a biased surrogate of publication merit. However, previous studies on this subject were based on small sample sizes and were entirely based on null-hypothesis significance testing. Here we evaluated the relative effects of different predictors on citation frequency of ecological articles using an information theory framework designed to evaluate multiple competing hypotheses. Supposed predictors of citation frequency (e.g., number of authors, length of articles) accounted for a low fraction of the total variation. We argue that biases concerning citation are minor in ecology and further studies that attempt to quantify the scientific relevance of an article, aiming to make further relationships with citation, are needed to advance our understanding of why an article is cited.     

Patterns of annual citation of highly cited articles and the prediction of their citation ranking: A comparison across subjects

High citation is associated with research quality and consequently findings on highly cited articles are useful to increase understanding of the factors that produce high quality research. This study explores highly cited articles in six subjects, focusing on late citation and peak citation years. Longitudinal citation patterns were found to be highly varied and, on average, different from the remaining articles in each subject. For four of the six subjects, there is a correlation of over 0.42 between the percentage of early citations and total citation ranking but more highly ranked articles had a lower percentage of early citations. Surprisingly, for highly cited articles in all six subjects the prediction of citation ranking of from the sum of citations during their first six years was less accurate than prediction using the sum of the citations for only the fifth and sixth year.     

Redistributed random sampling method for categorizing materials research publications from SCI database: Metallurgy and polymer subfields

This article introduced two sampling methods, including Directly Random Sampling (DRS) and Redistributed Random Sampling (RRS) methods for categorization of a large number of research articles retrieved from metallurgy and polymer subfields from the Science Citation Index (SCI) database. The accuracy of the proposed sampling methods was considered in association by comparing with reference results previously obtained by Fully Retrieving Sampling (FRS) method, which involved analyzing the contents and categories of all articles from the database. The results suggested that RRS and DRS methods were appropriate, efficient and reasonably accurate for categorization of relatively large volume of research articles. RRS method was highly recommended, especially when the contents of sample articles was unevenly distributed. By DRS and RRS methods, only about 6.3% of total articles were required for obtaining similar results as those given by FRS method. The percentage Expected Worst Errors (EWE) from DRS and RRS methods were observed to range from 1.0 to 5.5%. The EWE value could be reduced by increasing the sample size.     

Article-count impact factor of materials science journals in SCI database

This article proposed a new index, so-called “Article-Count Impact Factor” (ACIF) for evaluating journal quality in light of citation behaviour in comparison with the ISI journal impact factors. The ACIF index was the ratio of the number of articles that were cited in the current year to the source items published in that journal during the previous two years. In this work, we used 171 journal titles in materials categories published in the years of 2001–2004 in international journals indexed in the Science Citation Index Expanded (SCI) database as data source. It was found that ACIF index could be used as an alternative tool in assessing the journal quality, particularly in the case where the assessed journals had the same (equal or similar) JIF values. The experimental results suggested that the higher the ACIF value, the more the number of articles being cited. The changes in ACIF values were more dependent on the JIF values rather than the total number of articles. Polymer Science had the greatest ACIF values, suggesting that the articles in Polymer Science had greater “citation per article” than those in Metallurgical Engineering and Ceramics. It was also suggested that in order to increase a JIF value of 1.000, Ceramics category required more articles to be cited as compared to Metallurgical Engineering and Polymer Science categories.     

Scientific co-operation in Europe and the citation of multinationally authored papers

Under the sponsorship of the U.S. National Science Foundation, CHI Research, Inc. developed the bibliometric indicators for the U.S. National Science Board'sScience Indicators Reports starting withScience Indicators 1972. In the work reported here, for the Commission of the European Communities, CHI has extended the Science Indicators techniques and database to a study of publication, coauthorship and citation within 28 scientific fields related to various European Community programs.Perhaps the most important finding of the research was that internationally coauthored papers — papers authored by scientists affiliated with institutions in more than one EC country — were cited two times as highly as papers authored by scientists working at a single institution within a single country. These EC-EC internationally coauthored papers were cited as highly as EC-Non EC and Non-EC papers. This indicates that the internationally linked European science is of as high impact as any other science in the world.A second key finding was that, after compensating for national scientific size, the degree of international coauthorship did not appear to be particularly dependent upon size. However, linguistic and cultural factors were found to be very strong. The patterns of coauthorship amongst the European countries are far from homogeneous, and are quite heavily affected by linguistic, historical, and cultural factors.Finally, it was found that international coauthorship is increasing steadily, both within and outside of the Community, with some evidence that international cooperation is increasing more rapidly in scientific fields that have been targeted by the Commission.This work has been sponsored by the MONITOR programme of the Commission of the European Communities.     

The citation gap between printed and instrumental output of technological research: The case of the electron microscope

The merits and shortcomings of bibliometric evaluation techniques are well known; the reliability of the techniques varies according to the discipline. For technology the reliability is small. The electron microscope is a clear case of extreme mismatch between the number of citations received and the impact of the instrument in a wide area of science. The instrument is comparable to a scientific publication in the way in which it is used and referred to in the literature. In this paper we estimate the size of the citation gap, i.e. the number of citations an author misses because the results of his research are made public in the form of an instrument instead of via an article in a journal.     

Improvements in productivity based on co-authorship: a case study of published articles in China

This paper evaluates the importance of jointly conducted research versus national, when neighbouring countries are trying to study a topic of their mutual interest. The chosen topic was the shared ocean or lake basin. The number of non-mutual and mutual articles in the period 1999–2008 for seven pairs of neighbouring countries was analysed by extracting published articles and citations from the Web of Science database. It was found that mutual articles have generally better visibility than the non-mutual articles, valid even for large and developed countries. Also, the percentage of self-citations in the mutual articles is much lower than in the non-mutual ones. However, the citations of the non-mutual articles are influenced by the development of the country or, in some cases, by the development of the countries in which researchers from a certain country are presently working (this applies strongly to the Eastern Europe countries).     

Scientific linkage of science research and technology development: a case of genetic engineering research

In this study, the author tried to demonstrate the linkage between science research and technology development through non-patent citation analysis to reveal that the important knowledge resources from science research had significant impact on technology development. Genetic engineering technology was the field examined in this study. From the references listed in the patents, it was observed that the technology development in genetic engineering was influenced heavily by the research done by public sector. Over 90% of the citations were non-patent literatures, and the majority of non-patent citations were journal articles. Citing preferences, such as country preference and institute preference were observed from the data included in this study.     

A new database of the references on international clinical practice guidelines: a facility for the evaluation of clinical research

Scientometrics - Although there are now several bibliographic databases of research publications, such as Google Scholar, Pubmed, Scopus, and the Web of Science (WoS), and some also include counts...