An investigation of Eu-doped CaAlSiN3 fabricated by an alloy-nitridation method

We have synthesized CaAlSiN₃:Eu phosphors through an alloy-nitridation method with stable alloys as main starting materials, and investigated their crystal structures and photoluminescence properties in three aspects as below: (1) different Eu concentrations; (2) different Eu dopants; (3) different Al/Si molar ratios. The lattice volume calculated by using Rietveld refinement on the base of XRD analysis, decreases with oxygen incorporating, increases with the Al/Si ratios, and shows a limited expansion with the raise of Eu concentrations in CaAlSiN₃:Eu crystal lattice. The concentration quenching and the shifts of emission bands are investigated and discussed in details. The different lattice volumes deriving from corresponding compositions have an important effect on photoluminescence properties. This work provides some methods to tune the emission wavelengths of CaAlSiN₃:Eu phosphors.     

Influence of atmosphere on photoluminescence properties of Eu-doped ZnO nanocrystals

We have fabricated Eu³⁺-doped ZnO (ZnO:Eu) nanocrystals (NCs) by a reverse micelle method, and have studied their photoluminescence (PL) properties in vacuum, nitrogen gas, and oxygen gas atmospheres. The ZnO:Eu NCs exhibit the exciton, defect and Eu³⁺ PL under the inter-band photoexcitation of the ZnO host NCs. The intensity ratio among the three PL peaks is sensitive to the atmosphere for the PL measurements. We discuss the influence of the surrounding gas atmosphere to the PL properties.     

Synthesis and photoluminescence properties of new NaAlSiO4:Eu phosphors for near-UV white LED applications

A new NaAlSiO₄:0.1Eu²⁺ phosphors were synthesized at different temperatures using a liquid phase precursor (LPP) technique. The XRD patterns indicate the presence of hexagonal nepheline phase for all the samples. The synthesized phosphors can be excited efficiently in the broad near-UV region. The PL emission spectra showed a broad emission peak at around 551 nm corresponding to 5d → 4f transition of Eu²⁺ ions. The synthesized phosphors showed better thermal stability when compared with the standard YAG:Ce³⁺ phosphor.     

Synthesis of ultrafine spherical YAG:Eu phosphors by MOCVD

Ultrafine Europium-doped yttrium aluminum garnet (YAG:Eu³⁺) phosphor powders, with uniform diameters of about 1 μm, have been prepared by metallorganic chemical vapor deposition (MOCVD). The metal-organic precursors have been characterized by thermogravimetry-differential scanning calorimeter (TG-DSC). The phosphor powders have been identified by X-ray diffraction (XRD), scanning electron microscope (SEM) and photoluminescence measurements. It shows that the YAG:Eu³⁺ particles annealed at 1473 K for 3 h are nonaggregated and spherical, the diameter of particles is in the range of 1-2 μm. Phase-pure YAG which is of spherical shaped particles have been obtained and observed good luminescence property. Three major emission peaks were observed at 589, 594, and 607 nm.     

Greatly improved photoluminescence properties of the electrodeposited Y2O3:Eu thin film phosphors by the addition of Na and K ions

In this work, Y₂O₃:Eu³⁺ thin film phosphors were prepared by electro-deposition method. The effect of Na⁺ and K⁺ ions on the photoluminescence properties of Y₂O₃:Eu³⁺ thin film phosphor was studied in details. It was found that the addition of Na⁺ and K⁺ ions could improve the photoluminescence intensity by 3 to 4 times. The highly improved photoluminescence intensity may be caused by different factors. The improved crystallinity and the increased optical volume caused by the flux effect of Na⁺ and K⁺ ions could be the major reasons for the enhanced photoluminescence intensity. It was also found that the average lifetime of Y₂O₃:Eu³⁺ thin film phosphors could be adjusted by the molar amount of Na⁺ and K⁺ ions.     

Synthesis and luminescent characteristic of Eu-doped (Gd,Lu)2O3 nanopowders

Eu³⁺ doped (Gd,Lu)₂O₃ nanopowders with particle sizes ranging from 20 to 70 nm were synthesized by the co-precipitant method using mixed precipitants, namely the mixture of ammonium hydroxide (NH₃⋅H₂O) and ammonium hydrogen carbonate (NH₄HCO₃). The precipitate precursor prepared by this method was believed to possess a basic carbonate composition and its thermal decomposition of the (Gd,Lu)₂O₃:Eu³⁺ powders were investigated by Thermogravimetric analysis and differential thermal analysis (TG-DTA). This preparation was followed by a calcination process at 800-1100 °C and corresponding phosphor structure were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Photoluminescence measurement of the (Gd,Lu)₂O₃:Eu³⁺ particles show typical red emission at the 612 nm corresponding to the ⁵D₀ → ⁷F₂ transition. We found that the optimal Eu³⁺ molar doping concentration, calcined temperature and reaction time were 7 mol%, 1000 °C, and 2 h, respectively, which is helpful to obtain the final transparent ceramics with excellent properties.     

Effects of Zn doping on the structural and luminescent properties of Sr4Si3O8Cl4:Eu phosphors

Sr₄Si₃O₈Cl₄: Eu²⁺ phosphors were synthesized by the solid-reaction at high temperature. The emission intensity reaches a maximum at 0.08 mol% of Eu²⁺ concentration. The present paper mainly focused on the effects of Zn²⁺ on the crystallization behavior and photoluminescence (PL) properties of Sr₄Si₃O₈Cl₄:0.08Eu²⁺. Results suggested that no new phase is introduced by co-doping with a small amount of Zn²⁺ ions, but when co-doped with excessive amount of Zn²⁺ ions, Sr₂ZnSi₂O₇ appears. We find that the co-doping of a small amount of Zn²⁺ could remarkably improve the PL intensity of Sr₄Si₃O₈Cl₄:0.08Eu²⁺. When x = 0.05, the intensity of Sr₄Si₃O₈Cl₄:0.08Eu²⁺,xZn²⁺ was increased up to 2.3 times that of pure Sr₄Si₃O₈Cl₄:0.08Eu²⁺, which could be attributed to the flux effect of Zn²⁺ ions, and the Zn²⁺ doping reduces the opportunities of the energy transfer between Eu²⁺.     

Template-free fabrication of SnO2 hollow spheres with photoluminescence from Sni

SnO₂ hollow spheres with interstitial Sn²⁺ defect were fabricated by the hydrothermal method without any surfactant or polymer, whose shell is constructed by two layers of tetragonal prism nanorod arrays. The growth mechanism of the hollow spheres was investigated and attributed to the nucleation and arrangement of SnO₂ tetragonal prism nanorods on the surface of the hydrothermal reaction formed NO bubbles in the aqueous solution. After illumination by 275 nm wavelength light, narrow peak emissions centered at about 587-626 nm have been found in the photoluminescence spectrum, which have been ascribed to the interstitial Sn²⁺ defect in the SnO₂ hollow spheres.     

Eu-doped LiF-SrF2 eutectic scintillators for neutron detection

Eu²⁺ 0.05%, 0.1%, and 0.2% activated LiF-SrF₂ eutectic scintillators were prepared by the Bridgman method using ⁶Li enriched (95%) raw material. The α-ray-induced radio luminescence spectra showed intense emission peak at 430 nm due to an emission from Eu²⁺ 5d-4f transition in the Eu:SrF₂ layers. When excited by ²⁵²Cf neutrons, all the samples exhibited almost the same light yields of 5000-7000 ph/n with a typical decay times of several hundreds ns.     

Luminescence and energy transfer of Mn co-doped SrSi2O2N2:Eu green-emitting phosphors

Eu²⁺ and Mn²⁺ co-doped SrSi₂O₂N₂ green-phosphors, with promising luminescent properties (examined by their powder diffuse reflection, photoluminescence excitation and emission spectra) suitable for UV converted white LEDs, were produced by high temperature solid-state reaction method. The produced materials exhibited intense broad absorption bands at 220–500 nm and a broad emission band centered at ca. 530 nm, attributed to 4f–5d transitions of Eu²⁺. The emission intensity of Eu²⁺ ions was greatly enhanced by introducing Mn²⁺ ions into SrSi₂O₂N₂:Eu²⁺ due to the energy transfer from Mn²⁺ to Eu²⁺. The energy transfer probability from Mn²⁺ to Eu²⁺ depends strongly on the Mn²⁺ concentration, which is maximized at a Mn²⁺ concentration of 3 mol%. It drastically decreases for higher concentrations. The results indicated that SrSi₂O₂N₂:Eu²⁺, Mn²⁺ is a promising green-emitting phosphor for white-light emitting diodes with near-UV LED chips.     

Preparation of SrAl2O4: Eu, Dy nanometer phosphors by detonation method

SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer phosphors were synthesized by detonation method. The particle morphology and optical properties of detonation soot that was heated at different temperatures (600–1100 °C) had been studied systematically by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results indicated SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer powders in monoclinic system (a = 8.442, b = 8.822, c = 5.160, β = 93.415) can be synthesized by detonation method, when detonation soot was heated at 600–800 °C. The particle size of SrAl₂O₄: Eu²⁺, Dy³⁺ is 35 ± 15 nm. Compared with the solid-state reaction and sol-gel method, synthesis temperature of the detonation method is lower about 500 and 200 °C respectively. After being excited under UN lights, detonation soot and that heated at 600–1100 °C can emit a green light.     

Nanorods of white light emitting Sr2SiO4:Eu2+: microemulsion-based synthesis,EPR, photoluminescence,and thermoluminescence studies

White light emitting Sr₂SiO₄:Eu²⁺ nanoparticles were prepared using reverse micellar route using Tergitol as a surfactant. The systems were characterised by X-ray diffraction, scanning electron microscopy (SEM), photoluminescence, thermoluminescence (TL), and electron paramagnetic resonance (EPR) spectroscopy. SEM shows the formation of silicate nanorods. Two emission bands of bluish-green at 490 nm (S(I)) and of orange-red at 605 nm (S(II)) were observed. The two emission bands are assigned to the 4f–5d transition of Eu²⁺ ions in two different cation sites in α′-Sr₂SiO₄ orthorhombic lattices. Gamma-irradiated Sr₂SiO₄:Eu showed the presence of three TL glow peaks at 437, 487 K and weak peak at 540 K; however, no glow was observed in the undoped sample. Reduction of Eu³⁺ to Eu²⁺ is confirmed by EPR spectroscopy.     

Influence of excitation wavelengths on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol-gel-combustion processing

Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ red-emitting long afterglow phosphor was synthesized by sol-gel-combustion methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu₂O₃, Dy₂O₃, H₃BO₃ and C₆H₈O₇·H₂O as raw materials. The crystalline structure of the phosphors were characterized by X-ray diffraction, luminescent properties of phosphors were analyzed by fluorescence spectrophotometer. The effect of excitation wavelengths on the luminescent properties of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors was discussed. The emission peak of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor lays at 516 nm under the excitation of 360 nm, and at 612 nm under the excitation of 468 nm. The results reveal that the Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor will emit a yellow-green light upon UV illumination, and a bright red light upon visible light illumination. The emission mechanism was discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions in Sr₃Al₂O₆. The afterglow time of (Sr_0.94Eu_0.03Dy_0.03)₃ Al₂O₆ phosphors lasts for over 600s after the excited source was cut off.     

Photoluminescence properties of Y2O3:Tb and YBO3:Tb green phosphors synthesized by hydrothermal method

In this work, two Tb³⁺ activated green phosphors: Y₂O₃:Tb³⁺ and YBO₃:Tb³⁺ were prepared by hydrothermal method. Photoluminescence properties of both phosphors were studied in details. Both phosphors exhibit similar luminescent characteristics symbolized by the dominant green emission at 545 nm. Concentration quenching occurs at the Tb³⁺ concentration of 1.60 atomic% and 2.57 atomic% for Y₂O₃:Tb³⁺ and YBO₃:Tb³⁺, respectively. Luminescence decay properties were characterized to better understand the mechanism of concentration quenching. Based on the calculation, the concentration quenching in both phosphors was caused by the dipole–dipole interaction between Tb³⁺ ions.     

Low-temperature synthesis of Y2SiO5:Eu powders using mesoporous silica and their luminescence properties

This paper reports the synthesis of Eu³⁺ ions-doped Y₂SiO₅ (Y₂SiO₅:Eu³⁺) powders by mesoporous template route. Using mesoporous silica SBA-15 as silica source, Y₂SiO₅:Eu³⁺ powders were prepared by solid-state reaction at a calcination temperature of 1300 °C without fluxes. The prepared Y₂SiO₅:Eu³⁺ powders were characterized by X-ray diffraction, scanning electron microscope, nitrogen adsorption-desorption isotherms, and photoluminescence spectroscopy. The results show that the crystalline Y₂SiO₅:Eu³⁺ particles are dense and have a morphology similar to SBA-15. The low calcination temperature is attributed to the high reactive activity of SBA-15 with large surface area and non-crystalline structure. The Y₂SiO₅:Eu³⁺ powders prepared at a low calcination temperature show luminescence properties similar to the reported results of Eu³⁺ doped-Y₂SiO₅ samples prepared at high temperatures.     

CaSc2O4:Eu: A tunable full-color emitting phosphor for white light emitting diodes

We report an intense full-color emission originating from ⁵D_0,1,2,3 to ⁷F_0,1,2,3,4 transitions of Eu³⁺ in CaSc₂O₄ upon 395 nm excitation. The emission spectra vary with increasing Eu³⁺ concentration, demonstrating tunable color coordinates from white to red region in the CIE chromaticity diagram. Considering the relaxation from ⁵D_J to ⁵D_J−1 through cross energy transfer, the Eu³⁺ concentration dependent emission spectra are well simulated based on the analysis of steady state rate equations and the measured lifetimes of the ⁵D_J levels. It is suggested that CaSc₂O₄:Eu³⁺ could be a potential single-phased full-color emitting phosphor for near-ultraviolet InGaN chip pumped white light emitting diodes.     

Self-assembled 3D flower-like NaY(MoO4)2:Eu microarchitectures: Hydrothermal synthesis, formation mechanism and luminescence properties

Self-assembled 3D flower-like NaY(MoO₄)₂:Eu³⁺ microarchitectures were successfully synthesized by a glycine-assisted hydrothermal method at 180 °C. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM) were employed to characterize the as-obtained products. It was found that morphology modulation could be easily realized by changing the time of hydrothermal reaction system. 3D flower-like NaY(MoO₄)₂:Eu³⁺ microarchitectures were formed with 72 h reaction time. The formation mechanism for flower-like architecture was proposed on the basis of a series of time-dependent experiments. The NaY(MoO₄)₂:Eu³⁺ powders obtained can be effectively excited by 396 nm light, and exhibit strong red emission around 615 nm, attributed to the Eu³⁺⁵D₀ → ⁷F₂ transition. An investigation on the photoluminescence (PL) properties of NaY(MoO₄)₂:Eu³⁺ obtained revealed that the luminescence properties were correlated with the morphology and size.     

Influence of calcination temperature on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol–gel-combustion processing

The detailed preparation process of Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ phosphor powders with red long afterglow by sol–gel-combustion method in the reducing atmosphere is reported. X-ray diffraction, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the effects of synthesis temperature on the crystal characteristics, morphology and luminescent properties of the as-synthesized Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors. The results reveal that Sr₃Al₂O₆ crystallizes completely when the combustion ash is sintered at 1200 °C. The excitation and the emission spectra indicate that the excitation broad-band lies chiefly in visible range and the phosphor powders emit strong light at 618 nm under the excitation of 472 nm. The light intensity and the light-lasting time of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors are increased when increasing the calcination temperatures from 1050 to 1200 °C. The afterglow of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors sintered at 1200 °C lasts for over 600 s when the excited source is cut off. The red emission mechanism is discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions.     

Luminescence of nano- and macrosized LaPO4:Ce,Tb excited by synchrotron radiation

Comparing the luminescence properties of nanosized and macroscopic LaPO₄:Ce,Tb powders are performed in wide spectral range using synchrotron radiation. In the present study, LaPO₄:Ce,Tb nanopowder was produced by means of a microwave-induced synthesis in ionic liquids, whereas the bulk sample represents a commercial lamp phosphor. Emission and excitation of both, Ce³⁺ and Tb³⁺ luminescence, is observed to be different when comparing bulk and nanosized LaPO₄:Ce,Tb. In particular, it was shown that the fine structure of the Ce³⁺ as well as the Tb³⁺ related emission is poorly resolved for the nanomaterial. It is suggested that the nanoparticles surface plays a key role regarding the perturbation of rare-earth ions and changes their luminescence properties. Furthermore, it is demonstrated that allowed f-d transitions on Tb³⁺ at high energy are significantly suppressed for nanosized LaPO₄:Ce,Tb. Energy transfer is required to initiate Tb³⁺ emission even in the vacuum ultraviolet spectral range.     

Improved luminescence from Y2Sn2O7:Tb nanoparticles co-doped with Sb ions

Very small nanoparticles (size 3-5 nm) of Y₂Sn₂O₇, Y₂Sn₂O₇:Tb³⁺ and Sb³⁺ co-doped Y₂Sn₂O₇:Tb³⁺ were prepared at a relatively low temperature of 700 °C. Y₂Sn₂O₇ host is characterised by an emission around 436 nm, which is arising from the oxygen vacancies present in the lattice. Tb³⁺ emission improves significantly when Sb³⁺ ions are co-doped with Y₂Sn₂O₇:Tb³⁺ nanoparticles. Incorporation of Sb³⁺ ions at the Y³⁺ site of Y₂Sn₂O₇ lattice and associated lattice distortion around Tb³⁺/Y³⁺ ions brought about by the difference in the stable coordination number of Sb³⁺ and Y³⁺ ions are responsible for the improved Tb³⁺ emission from the co-doped samples.