POSS/PS复合材料的制备及其热性能研究

以1,3,5,7,9,11,13-苯基-15-氯丙基笼型倍半硅氧烷(POSS-Cl)与二乙醇胺进行反应,将末端氯基团转化为两个端羟基,通过羟基与2-溴代异丁酰溴的酯化反应得到POSS-(Br)2引发剂,并运用原子转移自由基聚合(ATRP)成功合成了一种新型POSS/PS复合材料。采用傅里叶红外(FTIR)、核磁共振(NMR)等手段对POSS和POSS/PS的结构进行了表征。通过差示扫描量热(DSC)和热失重(TGA)分析对POSS/PS复合材料的热性能进行了研究。结果表明:POSS单元的引入能显著提高聚合物的热稳定性。     

Synthesis and characterization of AB block copolymers based on polyhedral oligomeric silsesquioxane

Well-defined diblock copolymer based on polyhedral oligomeric silsesquioxane (POSS) was synthesized by atom transfer radical polymerization (ATRP) using POSS/PMMA-Cl as a macroinitiatior. POSS/PMMA-Cl was prepared by POSS-Cl initiating the polymerization of MMA in the presence of CuCl, 2, 2, - bipyridine at 110 °C. The structure of the block copolymer had been characterized by FTIR, ¹H NMR and GPC, which all agreed well with the theoretical values. XRD measurements revealed that POSS molecules were successfully monodispered in the hybrid composite.     

Solvent induced morphologies of poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) triblock copolymers synthesized by atom transfer radical polymerization

Poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) (PMMA-PEO-PMMA) triblock copolymers were synthesized using atom transfer radical polymerization (ATRP) and halogen exchange ATRP. PEO-based macroinitiators with molecular weight from M_n = 2000 to 35,800 g/mol were used to initiate the polymerization of MMA to obtain copolymers with molecular weight up to M_n = 82,000 g/mol and polydispersity index (PDI) less than 1.2. The macroinitiators and copolymers were characterized by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. The melting temperature and glass transition temperature of the copolymers were measured by differential scanning calorimetry (DSC). Crystallinities of the PEO blocks were determined from the WAXS patterns of both homopolymers and block copolymers, which revealed the fragmentation of PEO blocks due to the folding of the PMMA chains. Interestingly, the fragmentation was less pronounced when cast on surfaces compared to that in bulk, as measured by GISAXS. Solvent casting was used to control the morphology of the copolymers, permitting the formation of various states including amorphous, induced micellar with a PMMA core and flower-like PEO arms, and a cross-linked gel. Atomic force microscopy (AFM) was used to visualize the different copolymer morphologies, showing micellar and amorphous states.     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Poly(methylphenylphosphazene)–Graft–Poly(methyl Methacrylate) Copolymers Via Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) was used to graft poly(methyl methacrylate), PMMA, onto poly(methylphenylphosphazene), [(Me)(Ph)PN] _n , PMPP. A two-step process was used to convert a portion of the methyl substituents on [(Me)(Ph)PN] _n to –CH₂C(CH₃)₂OH groups and then to bromoalkyl groups, –CH₂C(CH₃)₂OC(=O)C(CH₃)₂Br, the latter of which served as initiation sites for ATRP of methyl methacrylate (MMA) in the presence of CuCl/bipyridine. Variations in the length of the grafted chains were investigated and the graft copolymers were compared to the parent polymer and blends of similar composition. The new bromoalkyl derivatives of [(Me)(Ph)PN] _n and the PMPP–graft–PMMA copolymers were characterized by elemental analysis, ¹H and ³¹P NMR spectroscopy, size exclusion chromatography (SEC), and differential scanning calorimetry (DSC). We dedicate this paper to Professor Harry R. Allcock for consistently maintaining the highest standards in his creative, pioneering work in inorganic rings and polymers.     

Controlled atom transfer radical polymerization of MMA onto the surface of high-density functionalized graphene oxide

We report on the grafting of poly(methyl methacrylate) (PMMA) onto the surface of high-density functionalized graphene oxides (GO) through controlled radical polymerization (CRP). To increase the density of surface grafting, GO was first diazotized (DGO), followed by esterification with 2-bromoisobutyryl bromide, which resulted in an atom transfer radical polymerization (ATRP) initiator-functionalized DGO-Br. The functionalized DGO-Br was characterized by X-ray photoelectron spectroscopy (XPS), Raman, and XRD patterns. PMMA chains were then grafted onto the DGO-Br surface through a ‘grafting from’ technique using ATRP. Gel permeation chromatography (GPC) results revealed that polymerization of methyl methacrylate (MMA) follows CRP. Thermal studies show that the resulting graphene-PMMA nanocomposites have higher thermal stability and glass transition temperatures (T_g) than those of pristine PMMA.     

An all ATRP route to PMMA-PEO-PS and PMAA-PEO-PS miktoarm ABC star terpolymer

An all Atom Transfer Radical Polymerization (ATRP) route to synthesize miktoarm ABC star terpolymer, μ-(poly(methyl methacrylate)-poly(ethylene oxide)-polystyrene) (μ-(PMMA-PEO-PS)), was demonstrated. Poly(methyl methacrylate) (PMMA) with a halide end group was first prepared by ATRP of MMA. It was then activated under ATRP conditions at 30 °C to add a styrenic-terminated PEO macromonomer, resulting in the formation of PMMA-b-PEO. Finally, the active halide at the junction point of the diblock copolymer was used to initiate the ATRP of St at higher temperature. By a similar approach, μ-(poly(phenyl methacrylate)-poly(ethylene oxide)-polystyrene) (μ-(PhMA-PEO-PS)) was synthesized, hydrolysis of which in basic medium gave μ-(PMAA-PEO-PS). The polymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography.     

N-[Salicylidene-1,2-ethanediaminoethyl]-2-bromoisobutyramide as initiator for atom transfer radical polymerization and surface-initiated ATRP of methyl methacrylate on copper

N-[Salicylidene-1,2-ethanediaminoethyl]-2-bromoisobutyramide (SEB) was synthesized and characterized by elemental analysis, FT-IR and ¹H NMR. It had been successfully used as a bidentate initiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate with CuBr/2,2′-bipyridine as the catalyst and N,N-dimethylformamide as the solvent at 70 °C. The kinetics was first order in monomer and the number-average molecular weight of the polymer increased linearly with monomer conversion, indicating the ‘living’/controlled nature of the polymerization. The polymerization reached high conversions producing polymers with a low molecular weight distribution (M _w/M _n = 1.34). The obtained poly(methylmethacrylate) (PMMA) functionalized with salicylidene-1,2-ethanediaminoethyl and ω-Br as the end groups were characterized by FT-IR spectroscopy. They can be used as macroinitiators for chain-extension reaction. Then, PMMA coatings were grafted from copper substrates by surface-initiated ATRP from a surface-bound SEB initiator. The electrochemical impedance spectroscopy measurements and potentiodynamic electrochemical experiments confirmed the successful grafting of the polymer coatings. Greatly improved short-term anticorrosive properties for PMMA modified electrodes were demonstrated by substantially increased resistance of the film for a period of 24 h as compared to bare copper.     

Grafting polymer from poly(ethylene terephthalate) films by surface‐initiated ATRP

Surface‐initiated atom transfer radical polymerization (ATRP) from poly(ethylene terephthalate) (PET) film was studied. Poly(methyl methacrylate) (PMMA), poly (acrylamide) (PAAM), and their diblock copolymer (PMMA/PAAM) on the surface of PET film were successfully prepared by surface‐initiated ATRP. The structures and properties of the modified PET film were characterized by FT‐IR/ATR, X‐ray photoelectron spectroscopy (XPS), measurements of contact angles, and scanning electronic microscopy (SEM). The results indicate that the surface properties of PET film were greatly improved by grafted polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and properties of PVC/PMMA-g-imogolite nanohybrid via surface-initiated radical polymerization

Poly(methyl methacrylate) (PMMA) grafted imogolite clay nanotubes (PMMA-g-imogolite) were prepared through activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) by developing a water soluble amphiphilic ATRP initiator, which carries both an initiator moiety and a surface-attachable phosphate group. Poly(vinyl chloride)/PMMA-g-imogolite nanohybrid was prepared by using this PMMA grafted imogolite. The structure and properties of the prepared nanohybrid were characterized by differential scanning calorimetry (DSC), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and tensile test. DSC and TEM results indicate that well-dispersed PMMA-g-imogolite dominates in the nanohybrid, in spite of some imogolite rich regions. SEM observation of the fracture surfaces and the fractured films reveals that the interfacial adhesion between PMMA grafted imogolite and the matrix may be weak or strong with respect to the cohesive energy of the poly(vinyl chloride) (PVC) matrix, depending on the environmental temperature. In liquid nitrogen or at room temperature, the interfacial adhesion between PMMA grafted imogolite and the matrix is weaker, while at 90 °C, is stronger than the cohesion of the PVC matrix. In accordance with the interfacial performance, the nanohybrid shows inferior tensile performance at room temperature; whereas, superior tensile performance at 90 °C compared with the pristine PVC.     

Surface-initiated atom transfer radical polymerization of polyhedral oligomeric silsesquioxane (POSS) methacrylate from flat silicon wafer

A polyhedral oligomeric silsesquioxane (POSS) methacrylate monomer, i.e. 3-(3,5,7,9,11,13,15-heptacyclopentyl-pentacyclo [9.5.1.1.^3,91.^5,151^7,13]-octasiloxane-1-yl) propyl methacrylate (POSS-MA), was directly grafted from flat silicon wafers using surface-initiated atom transfer radical polymerization (ATRP). Two methods were used to improve the system livingness and control of polymer molecular weights. By ‘adding free initiator’ method, a linear relationship between the grafted poly(POSS-MA) layer thickness and monomer conversion was observed. By ‘adding deactivator’ method, the poly(POSS-MA) thickness increased linearly with reaction time. Poly(POSS-MA) layers up to 40 nm were obtained. The chemical compositions measured by X-ray photoelectron spectroscopy (XPS) agreed well with their theoretical values. Water contact angle measurements revealed that the grafted poly(POSS-MA) was extremely hydrophobic. The surface morphologies of the grafted polymer layers were studied by an atom force microscopy (AFM).     

Synthesis and characterization of AB‐type copolymers poly(L‐lactide)‐block‐poly(methyl methacrylate) via a convenient route combining ROP and ATRP from a dual initiator

Diblock copolymers of poly(L ‐lactide)‐block‐poly(methyl methacrylate) (PLLA‐b‐PMMA) were synthesized through a sequential two‐step strategy, which combines ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), using a bifunctional initiator, 2,2,2‐trichloroethanol. The trichloro‐terminated poly(L ‐lactide) (PLLA‐Cl) with high molecular weight (M_n,GPC = 1–12 × 10⁴ g/mol) was presynthesized through bulk ROP of L ‐lactide (L ‐LA), initiated by the hydroxyl group of the double‐headed initiator, with tin(II) octoate (Sn(Oct)₂) as catalyst. The second segment of the block copolymer was synthesized by the ATRP of methyl methacrylate (MMA), with PLLA‐Cl as macroinitiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst, and dimethyl sulfoxide (DMSO) was chosen as reaction medium due to the poor solubility of the macroinitiator in conventional solvents at the reaction temperature. The trichloroethoxyl terminal group of the macroinitiator was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy. The comprehensive results from GPC, FTIR, ¹H‐NMR analysis indicate that diblock copolymers PLLA‐b‐PMMA (M_n,GPC = 5–13 × 10⁴ g/mol) with desired molecular composition were obtained by changing the molar ratio of monomer/initiator. DSC, XRD, and TG analyses establish that the crystallization of copolymers is inhibited with the introduction of PMMA segment, which will be beneficial to ameliorating the brittleness, and furthermore, to improving the thermal performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of UV-cured epoxy acrylate/POSS nanocomposites

In this study, epoxy acrylate (EA)/vinyl-polyhedral oligomeric silsesquioxane (POSS) nanocomposites were prepared through in situ polymerization and by UV-curing technique. The vinyl-POSS monomers were added to EA matrix by physically blending at loadings between 0 wt.% and 15 wt.%. The microstructure of the EA/vinyl-POSS composites was studied by X-ray diffraction (XRD) measurements, and the result indicated that the separate POSS domains were present in EA/POSS composites. Aggregates were observed in the nanocomposites by SEM and the EDS results indicated that there were vinyl-POSS molecules existing in the EA matrix. TEM images further proved there were both POSS aggregates and monomers dispersed in the EA matrix. The kinetics of the photopolymerization was investigated by real time FTIR spectroscopy. The DSC analysis showed that the increasing POSS content caused a decrease on the composite's glass transition temperature. TGA measures confirmed that the degradation mechanism of EA was not affected by POSS and the nanocomposites thermal stability was slightly improved with the increasing of POSS loadings. It can be seen that the degradation rate slowed down with the increasing of POSS content and the 50% mass loss temperature of EA/POSS hybrids all increased conspicuously relative to plain EA.     

Miscibility and viscoelastic properties of acrylic polyhedral oligomeric silsesquioxane-poly(methyl methacrylate) blends

We investigate the miscibility of acrylic polyhedral oligomeric silsesquioxanes (POSS) [characteristic size d≈2 nm] and poly(methyl methacrylate)(PMMA) in order to determine the effect of well-dispersed POSS nanoparticles on the thermomechanical properties of PMMA. Two different acrylic POSS species (unmodified and hydrogenated) were blended separately with PMMA at volume fractions up to ?=0.30. Both POSS species have a plasticizing effect on PMMA by lowering the glass transition temperature T_g and decreasing the melt-state linear viscoelastic moduli measured in small amplitude oscillatory shear flow. The unmodified acrylic-POSS has better miscibility with PMMA than the hydrogenated form, approaching complete miscibility for loadings ?<0.10. At a loading ?=0.05, the unmodified acrylic POSS induces a 4.9 °C decrease in the T_g of PMMA, far less than the 17.4 °C decrease in the glass transition temperature observed in a blend of 5 vol% dioctyl phthalate (DOP) in PMMA; however, the decrease in the glass transition temperature per added plasticizer molecule is nearly the same in the unmodified acrylic-POSS-PMMA blend compared with the DOP-PMMA blend. Time-temperature superposition (TTS) was applied successfully to the storage and loss moduli data and the resulting shift factors were correlated with a significant increase in free volume of the blends. The fractional free volume f₀=0.046 for PMMA at T₀=170 °C while for a blend of 5 vol% unmodified acrylic-POSS in PMMA f₀=0.057, which corresponds to an addition of 0.47 nm³ per added POSS molecule at ?=0.05. The degree of dispersion was characterized using both wide-angle X-ray diffraction (WAXD) and dynamic mechanical analysis (DMA). Diffraction patterns for both blend systems show clear evidence of phase separation at ?=0.20 and higher, but no significant phase separation is evident at ?=0.10 and lower. The storage modulus measured in DMA indicates appreciable phase separation for unmodified acrylic POSS loadings ?≥0.10, while no evidence of phase separation is present in the ?=0.05 blend in DMA.     

The effect of incorporation of POSS units on polymer blend compatibility

In this work, the compatibility of poly(methyl methacrylate) (PMMA) and polystyrene (PS) polymers with their polyhedral oligomeric silsesquioxane (POSS) copolymers combined by solution blending is investigated, to determine the effect of incorporation of the POSS unit on polymer compatibility. The morphology of these tethered POSS copolymer/polymer blends was studied by electron microscopy, thermal analysis, and density. Although the basic PS/PMMA blend was clearly immiscible, it was also found that the incorporation of POSS into the PS chain led to incompatibility when the POSScoPS copolymer was blended with PS homopolymer. However, conversely, in the case where the POSS moiety was included as part of a copolymer with PMMA, the copolymer was miscible with the PMMA homopolymer. The presence of isobutyl units on the corners of POSS cage is clearly sufficient to encourage miscibility with PMMA. Interestingly, blends of the two different POSS copolymers led to an immiscible structure, despite having the common POSS units, the interactions between the POSS moieties clearly not being sufficient to drive compatibility. The POSS copolymers have also been used as interfacial agents in immiscible PS and PMMA blend, and it has been found that the appearance of the interface bonding is improved, although the phase morphology is only slightly changed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fabrication of composite films with poly(methyl methacrylate) and incompletely condensed cage‐silsesquioxane fillers

Polyhedral oligomeric silsesquioxane (POSS) is a promising nanofiller for tuning properties of optically transparent polymer materials. On the other hand, traditional completely condensed POSS (CC‐POSS) has a fundamental problem for fabricating optically transparent composite films; CC‐POSS has high crystallinity due to its symmetrical structure, resulting in aggregation in the polymer matrices. In this work, we have demonstrated that incompletely‐condensed POSS (IC‐POSS), which has an open‐cage structure, can be well dispersed in a poly(methyl methacrylate) (PMMA) matrix. IC‐POSS with various substituents were readily synthesized, and their composite films of PMMA were fabricated by solution‐casting method. High transparency was achieved with up to 30 wt % of the IC‐POSS fillers, while the CC‐POSS analogues caused phase separation with 10 wt % loading. Addition of the IC‐POSS fillers can improve thermal stability and control glass transition temperature by the substituent structure. Additionally, refractive index was tuned from 1.485 to 1.513. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46033.     

Zirconium-Embedded Polyhedral Oligomeric Silsesquioxane Containing Phosphaphenanthrene-Substituent Group Used as Flame Retardants for Epoxy Resin Composites

A zirconium hybrid polyhedral oligomeric silsesquioxane derivative (Zr–POSS–bisDOPO) is synthesized by the corner-capping and Kabachnik–Fields reactions. It is characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR), and then used as a flame retardant in diglycidyl ether of bisphenol A (DGEBA) to endow epoxy resin (EP) with flame retardancy. The flame retardancy, thermal stability, and mechanical properties of the cured EP/Zr–POSS–bisDOPO composites are investigated. The results show that when Zr–POSS–bisDOPO is added by 5–7 wt%, the EP/Zr–POSS–bisDOPO composites pass the UL-94 V-0 rating test. In addition, they have a better flame-retardant effect than pure EP. The combination of Zr atom embedded in the Si O cubic cage and the two phosphaphenanthrene substituent groups in one corner of cubic cage is expected to realize the Zr/Si/P ternary intramolecular hybrid synergistic effect and achieve the possibility of dispersing metal–POSS cages at a sub-micrometer-scale level into polymer matrix. It also proves that Zr–POSS–bisDOPO produces phosphorus-containing free radicals and terminates the chain reactions in gas phase. Meanwhile the Si O Si and Zr O units are retained in the solid phase, which promote the char formation and enhance the flame retardancy. This kind of Zr-doped POSS will be helpful for developing the new metal–POSS hybrid flame-retardant and polymer composites.     

氨丙基低聚硅倍半氧烷及其酰胺化产物的合成与表征

由3-氨基丙基三甲氧基硅烷（NH₂-propyl-silane）出发,在碱催化条件下采用水解缩合一锅法合成了笼形氨丙基硅倍半氧烷（NH₂-propyl-POSS）。红外光谱、核磁共振、电喷雾飞行质谱（ESI-TOF）表征结果表明,合成产物NH₂-propyl-POSS是不同大小笼形结构的混合物,其中T8、T9、T10笼形结构含量较高。由NH₂-propyl-POSS分别与乙酸和丙炔酸进行酰胺化反应,进一步合成了乙酰基丙基POSS（CH₃-CONH-POSS）和丙炔酰基丙基POSS（CH≡C—CONH-POSS）,并通过红外光谱、氢谱、碳谱分析表征了其结构。X射线衍射分析结果表明,3种POSS均为非晶态结构。通过热重分析可知,NH₂-propyl-POSS具有较高的热稳定性。将NH₂-propyl-POSS用于提高环氧树脂（EP）的热稳定性,添加量为5 %（质量分数,下同）时,EP/NH₂-propyl-POSS共混物的玻璃化转变温度（T_g）提高至180.7 ℃,极限氧指数（LOI）为25.2 %。     

The effects of structure of POSS on the properties of POSS/PMMA hybrid materials

Octa‐vinyl polyhedral oligomeric silsesquioxane (V‐POSS) and octa‐(methacryloxy) propyl polyhedral oligomeric silsesquioxane (M‐POSS) were incorporated into PMMA to prepare POSS/PMMA hybrid materials at molecular level via in situ polymerization. The resulting hybrid materials showed only swelling instead of solution in ethyl acetate, while pristine PMMA completely dissolved in ethyl acetate; moreover, the M‐POSS/PMMA hybrid materials exhibited more excellent resistance to solvent stress cracking. An excellent transparency was observed for all hybrid materials. Incorporation of V‐POSS and M‐POSS significantly improved thermal properties of PMMA. The thermal decomposition temperature of hybrid materials was enhanced except a slightly compromised initial decomposition temperature. The hybrid materials prepared with 0.2–0.6 mol% M‐POSS or V‐POSS improved the reinforcing and toughening properties in comparison to pristine PMMA. Also, the incorporation of POSS decreased the dielectric constant and dielectric loss of the hybrid materials with more voids introduced into the composites no matter the structure of POSS. POLYM. ENG. SCI., 55:565–572, 2015. © 2014 Society of Plastics Engineers     

Poly(methyl methacrylate)/POSS hybrid networks by type II photoinitiated free radical polymerization

A new strategy for organic–inorganic hybrid networks is presented through in‐situ Type II photoinitiated polymerization of methyl methacrylate with diethanolamino‐functionalized polyhedral oligomeric silsesquioxanes (POSS‐DEA). The diethanolamino groups are simply incorporated onto POSS nanoparticles by nucleophilic ring‐opening reaction of commercially available epoxycyclohexyl POSS and diethanol amine. The photoinitiated polymerization of methyl methacrylate in the presence of benzophenone as photosensitizer and POSS‐DEA as hydrogen donor leads to poly(methyl methacrylate) (PMMA)/POSS hybrid networks under UV light irradiation. The morphology and thermal properties of hybrid networks are investigated by using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy. The morphology results confirm that POSS cages are homogeneously distributed in PMMA matrix at the molecular levels, whereas the thermal analyses shows that the obtained hybrid networks have higher glass transition temperatures and better thermal stabilities compared to parent PMMA homopolymer. POLYM. COMPOS., 35:1614–1620, 2014. © 2013 Society of Plastics Engineers