Histometric and histomorphologic comparison of combustion and ambustion using in vivo reflectance‐confocal microscopy

Background: When combustion and ambustion induce a superficial injury, they are summarized as superficial burns, regardless of the underlying cause. Reflectance‐confocal microscopy (RCM) allows noninvasive imaging of the human skin on morphological features. We hypothesized that combustion and ambustion have different histomorphological effects on the human skin. Methods: Superficial burns caused by combustion (CO‐group, five females, three males; aged 26.8 ± 14.2 years) and caused by ambustion (AM‐group, four females, four males; aged 28.1 ± 13.8 years) were evaluated 24 h after injury. The following parameters were obtained using RCM on injured and noninjured (control) site: horny layer thickness, epidermal thickness, granular cell size, basal layer thickness. Results: Compared with the controls (12.8 ± 2.5 μm), horny layer thickness decreased significantly to 10.6 ± 2.1 μm in the CO‐group, whereas it increased significantly to 17.8 ± 2.8 μm in the AM‐group. The epidermal thickness did not differ significantly in CO‐group (47.9 ± 2.1 μm) and AM‐group (49.0 ± 3.1 μm), however, both increased significantly compared with the controls (42.7 ± 1.6 μm). The basal layer thickness increased more in AM‐group (17.0 ± 1.2 μm) compared to CO‐group (15.4 ± 1.1 μm). Both differed significantly compared with their controls (13.9 ± 0.9 μm). The granular cell size increased significantly in both groups ompared to the controls (721 ± 42 μm), however, a significantly higher increase was observed in CO‐group compared to AM‐group (871 ± 55 μm vs. 831 ± 51 μm). Conclusions: RCM evaluates significant histomorphological differences in superficial burns caused by combustion and ambustion. The term “superficial burn” should consider the underlying cause and thus supplemented by the term “combustion” or “ambustion.” Microsc. Res. Tech., 2010. © 2009 Wiley‐Liss, Inc.     

Palyno-morphological attributes of some selected plant species of family Asteraceae from district Dera Ismail Khan,KPK, Pakistan

The current study aimed to investigate the palyno-morphological features of Asteraceous species from District Dera Ismail Khan, Khyber Pakhtunkhwa, Pakistan. A total of 13 species were collected, pressed, identified, and examined by using light and scanning electron microscopy. Both qualitative and quantitative pollen characters were observed, that is, equatorial and polar diameter, number of pores and colpi, exine thickness, exine sculpturing, pollen shape, and P/E ratio. Pollen shapes observed in studied taxa were spheroidal, suboblate, oblate-spheroidal, and lophate-spheroidal. The aperturation patterns of pollens vary from tricolporate to tetracolporate. The maximum polar and equatorial diameter of 75–100 (87.5 ± 13.6) μm and 87.5–117.5 (102.5 ± 16.4) μm, respectively, was recorded in Echinops echinatus, while minimum polar and equatorial diameter of 20–22.5 (21 ± 1.36) μm and 22.5–25 (23.5 ± 1.36) μm, respectively, was recorded in Aster subulatus. Six types of exine sculpturing patterns were observed; echinate, micro-echinate, echinate-microreticulate, microreticulate, echinate-perforate, and scabrate. Maximum exine thickness of 8.75 μm was recorded in E. echinatus and minimum of 1.25 μm in Launaea mucronata. The pollen morphology has valuable significance in understanding the taxonomy of different plant groups and plays a central role in the correct identification and classification of Asteraceous flora at species, generic, and tribe levels.     

Microceramic injection molding of a multilayer micropatterned micropart

Microceramic injection molding (µCIM) has shown great potential in making small-scale intricate near-net-shape parts with the competitive price for mass production. In this study, multi-exposure multi-development UV-Lithographie, Galvanoformung, Abformung (LIGA), µCIM, variothermal temperature control, and Taguchi experimental method are integrated and applied to develop a multilayer micropart with zirconia (ZrO₂) feedstock. With the variothermal temperature control, a 335 μm thickness multilayer micropart having 100 microholes of 21.6 μm in diameter has been successfully molded. Optimization of the molding parameters to achieve high microhole replication quality molding was carried out with Taguchi experimental method. Results from Taguchi experiments reveal that mold temperature (40.9%), back pressure (31.8%), and injection speed (26.8%) contribute most to the replication quality, while ejection temperature has little effect on it. After further sintering processing, the thickness of the part is 200 μm, the final microhole diameter is 17.3 μm and its depth is 35.3 μm while the width of the channel is 38.5 μm and its height is 35.3 μm, and the accumulated aspect ratio of the dual layer structure is 2.95.     

Local burn versus local cold induced acute effects on in vivo microcirculation and histomorphology of the human skin

Background: The impact of burns and colds on human skin microcirculation and histomorphology has not been compared as yet. Reflectance confocal microscopy (RCM) enables in vivo insight in human skin on cellular and subcellular levels. We evaluated analogies and differences of thermal injuries on microcirculation and histomorphology in vivo using RCM. Methods: Local superficial burn (6 female, 4 male; aged 28.4 ± 2.9 years, burn group) versus superficial cold (4 female, 6 male; aged 30.4 ± 5.2 years, cold group) was induced on the dorsum of the hand in an experimental immersion hand model. In vivo RCM was performed prior (control), immediately (t1) and 15 minutes (t2) following thermal injury to evaluate: Individual blood cell flow (IBCF), functional capillary density (FCD), epidermal thickness (ET), and granular cell size (GCS). Results: In the burn group, IBCF was increased at t1 (78.02 ± 2.60/min) and remained elevated at t2 (84.16 ± 3.04/min). In the cold group, IBCF decreased at t1 (12.62 ± 2.12 min) and increased at t2 (74.24 ± 3.14/min, P < 0.05) compared to the controls (58.23 ± 3.21/min). FCD was 6.74 ± 0.52/mm² in controls and increased at both t1 (7.82 ± 0.72/mm²) and t2 (8.02 ± 0.81/mm²) in the burn group. In the cold group, FCD decreased at t1 (2.60 ± 0.42/mm²) and increased at t2 (7.92 ± 0.44/mm², P < 0.05). ET increased at both t1 (43.12 ± 4.08 μm, P > 0.05) and t2 (47.26 ± 4.72 μm, P < 0.05) in the burn group. In the cold group, ET decreased at t1 (39.92 ± 3.14 μm, P > 0.05) and increased at t2 (44.72 ± 4.06 μm, P < 0.05) compared to the controls (41.26 ± 3.82 μm). Control GCS was 726.9 ± 59.4 μm² and increased at both t1 (739.8 ± 69.8 μm², P > 0.05) and t2 (762.6 ± 71.4 μm², P < 0.05) in the burn group. In the cold group, GCS decreased at t1 (712.4 ± 53.8 μm², P > 0.05) and increased at t2 (742.6 ± 64.8 μm², P < 0.05). Conclusions: Superficial burn induces more cellular destruction and cold leads to huge fluctuation in tissue perfusion, however, with moderate impact on histomorphology. The effect on dermal capillaries suggests a selective neural control and cold injuries might down‐regulate this system, much more than burns can activate it. Microsc. Res. Tech., 2011. © 2011 Wiley‐Liss, Inc.     

Characterization of Albanian water frog,Pelophylax shqipericus,sperm traits and morphology,by using phase contrast microscopy

Mature spermatozoa traits and morphology of endangered Albanian water frog, Pelophylax shqipericus, have been characterized for the first time through phase contrast microscopy, as part of successful implementation of in vitro fertilization technique for this species. The basic morphology of P. shqipericus spermatozoa consists of an elongated, thick, smooth‐edged, and solid‐staining head, continuing with a thin and long tail which usually extends 2.48 times the head length. The acrosome was not clearly discernible so the measurements were done on the head as a whole, while the middle section was better visible. Average length of head, including the acrosome and midsection was estimated to be 11.78 μm ± 0.32, while the tail length resulted 29.24 ± 1.75 μm. The average thickness of the head was shown to be 3.45 μm. The total sperm length resulted to be 41.02 ± 1.83 μm. The average sperm concentration was estimated of 25.5 × 10⁶/ml. Sperm amount, survival rate and motility were also measured. The sperm survival rate was maximal immediately after preparation of the suspension and tended to decrease over time of storage, reaching 50% after 72 hr. Decreased sperm motility seemed to follow the same trend as sperm viability. Sperm traits resulted to be very similar both in size and in shape with those of “Lessonae” frog group, one of the lineages of Western Palearctic species complex, suggesting a strong phylogenetic relationship among these species.     

Morphometric,quantitative, and three‐dimensional analysis of the heart muscle fibers of old rats: Transmission electron microscopy and high‐resolution scanning electron microscopy methods

This research investigated the morphological, morphometric, and ultrastructural cardiomyocyte characteristics of male Wistar rats at 18 months of age. The animals were euthanized using an overdose of anesthesia (ketamine and xylazine, 150/10 mg/kg) and perfused transcardially, after which samples were collected for light microscopy, transmission electron microscopy, and high‐resolution scanning electron microscopy. The results showed that cardiomyocyte arrangement was disposed parallel between the mitochondria and the A‐, I‐, and H‐bands and their M‐ and Z‐lines from the sarcomere. The sarcomere junction areas had intercalated disks, a specific structure of heart muscle. The ultrastructural analysis revealed several mitochondria of various sizes and shapes intermingled between the blood capillaries and their endothelial cells; some red cells inside vessels are noted. The muscle cell sarcolemma could be observed associated with the described structures. The cardiomyocytes of old rats presented an average sarcomere length of 2.071 ± 0.09 μm, a mitochondrial volume density (Vv) of 0.3383, a mitochondrial average area of 0.537 ± 0.278 μm², a mitochondrial average length of 1.024 ± 0.352 μm, an average mitochondrial cristae thickness of 0.038 ± 0.09 μm and a ratio of mitochondrial greater length/lesser length of 1.929 ± 0.965. Of the observed mitochondrial shapes, 23.4% were rounded, 45.3% were elongated, and 31.1% had irregular profiles. In this study, we analyzed the morphology and morphometry of cardiomyocytes in old rats, focusing on mitochondria. These data are important for researchers who focus the changes in cardiac tissue, especially changes owing to pathologies and drug administration that may or may not be correlated with aging. Microsc. Res. Tech., 2013. © 2012 Wiley Periodicals, Inc.     

光纤石英玻璃基板微V槽阵列的精密磨削

针对脆性石英玻璃的微加工,利用自主研发的金刚石砂轮微尖端修整工艺,研发了光纤阵列石英玻璃微V槽磨削技术。分析了60°的微V槽形状偏差对光纤耦合损耗的影响,然后,研究了砂轮微尖端的误差补偿修整工艺。最后,实验分析了微V槽的磨削精度。理论分析显示:微V槽角度、间距和宽度的偏差分别控制在±0.42°、±1.04μm和±1.2μm以内时,耦合损耗小于0.5dB。实验结果表明:开发的数控磨削工艺可加工高精度的60°微V槽阵列;采用数控轨迹和角度补偿修整后,砂轮微尖端半径可平均达到10.46μm,角度精度为(60±0.22)°;对石英玻璃进行微磨削后,微V槽的角度偏差达到0.4°,尖端半径为10.5μm,宽度偏差为0.3μm,间距偏差为0.5μm,可保证光纤阵列的精密对接。     

Three-dimensional morphometrical study of dendritic spines of the granule cell in the rat dentate gyrus with HVEM stereo images

Number, length, and diameters of dendritic spines of the granule cell in the dorsal leaf of the rat dentate gyrus were measured by using high-voltage electron microscope stereo images of 5-m?m-thick Golgi preparations with the aid of a three-dimensional image analyzer system. Spine densities of 2.02 ± 0.28, 2.28 ± 0.33, and 3.36± 0.35 per 1 μm at distal, middle, and proximal portions of the dendrite were obtained. These values were about 1.6-fold of the previous light microscopical report. Mean three-dimensional spine length were 1.244 ± 0.506 μm, 1.262 ± 0.563 μm, and 1.254 ± 0.584 μm at distal, middle, and proximal portions, respectively, which were about 1.4 times longer than those measured in two dimensions. By using measured morphometrical parameters of spines such as lengths, diameters, and population densities, total spine surface areas of 2.401 μm², 2.806 μm², and 4.180 μm² per 1 μm of the dendrite at distal, middle, and proximal portions, respectively, were obtained. The total surface area of dendrite was about doubled by the addition of the spines at each dendritic portion. The advantageous features and the problems of the present method are discussed.     

Palyno‐morphological investigations of subtropical endangered flora of Capparidaceae through light and scanning electron microscopy

The research was performed to investigate pollen morphology of endangered species of Capparidaceae in subtropical regions of Pakistan. The distinguishing characters were investigated by using light microscope and scanning electron microscope. Palynological study is comprised of pollen shape, pollen type, exine sculpturing, polar and equatorial diameter, length and width of colpi, mesocolpium, and exine thickness. In polar view, Cleome viscosa exhibited the highest pollen size 26.4 (32.7–24.5 μm) ±0.776 whereas Capparis spinosa appeared to be the lowest 12.6 (14.5?10.7 μm) ±0.400. In equatorial view, Cleome viscosa had the largest pollen size 17.1 (20.0–15.0 μm) ±0.606 and Capparis spinosa had the smallest pollen size 9.7 (12.50–8.00 μm) ±0.394. The maximum fertility percentage has been observed in Capparis spinosa, that is, 98.96% and minimum in Cleome viscosa, that is, 82.93%. Diagnostic key has been constructed to state the essential diagnostic features by means of which the taxa can be identified. Remarkable variations have been observed in pollen size, shape, and exine sculpturing. All the selected species were tricolporate. Prolate to subprolate pollen were observed. There is a great variation existed in exine sculpturing such as in Capparis decidua and C. sp. nova sculpturing is reticulate, in Capparis himalayensis sculpturing is Scabrate granulate, in Capparis spinosa sculpturing is Psilate, in Cleome viscosa sculpturing is regulate‐reticulate, in Dipterygium glaucum sculpturing is regulate and in Gynandropsis gynandra sculpturing is striate‐regulate. On the basis of overall characteristics of pollen it seems that palynology of this family is helpful at the generic and specific level.     

Palyno‐anatomical studies of monocot taxa and its taxonomic implications using light and scanning electron microscopy

Palyno‐anatomical study of monocots taxa using Light and Scanning Electron Microscopy (SEM) was first time conducted with a view to evaluating their taxonomic significance. Studied plants were collected from different eco‐climatic zones of Pakistan ranges from tropical, sub‐tropical, and moist habitats. The aim of this study is to use palyno‐anatomical features for the correct identification, systematic comparison, and investigation to elucidate the taxonomic significance of these features, which are useful to taxonomists for identifying monocot taxa. A signification variation was observed in quantitative and qualitative characters by using the standard protocol of light microscopy (LM) and SEM. Epidermal cell length varied from maximum in Allium griffthianum (480 ± 35.9) μm at the adaxial surface to minimum in Canna indica (33.6 ± 8.53) μm on abaxial surface. Maximum exine thickness was observed in Canna indica (4.46) μm and minimum in Allium grifthianum (0.8) μm. Variation was observed in shape and exine ornamentation of the pollen, shape of the epidermal cell, number, size, and type of stomata, guard cell shape, and anticlinal wall pattern. Based on these palyno‐anatomical features a taxonomic key was developed, which help in the discrimination of studied taxa. In conclusion, LM and SEM pollen and epidermal morphology is explanatory, significant, and can be of special interest for the plant taxonomist in the correct identification of monocots taxa.     

Reflectance confocal‐laser‐scanning microscopy in vivo assessments of cigarette‐induced dynamic alterations of cutaneous microcirculation on histomorphological level

Objective: Until now, high resolution reflectance confocal‐laser‐scanning microscopy (CLSM) was used for observation of cutaneous morphology in vivo and in real time. We hypothesized that CLSM also allows observation of dynamic processes of cutaneous microcirculation. Methods: Reflectance CLSM (Vivascope1500; Lucid, Rochester, NY) was performed in 24 young male habitual smokers (23 years, range: 19–26, body mass index 23.9 ± 4.04) with relatively limited cigarette exposure (mean: 3.1 ± 2.4 pack‐years). Eight matched nonsmokers served as controls. The quantitative blood cell flow and the diameter of capillary loops were determined prior (baseline), during, as well as 5 and 10 min after smoking. Results: Baseline value for blood cell flow was 55.50 ± 2.33 cells/min, and decreased over 45% during smoking (30.43 ± 3.76/min; P = 0.02). They were still 22% lower (43.33 ± 2.45/min; P = 0.01) 5 min after smoking and exceeded baseline values 10 min after smoking by 13% (63.00 ± 3.10/min; P > 0.05). The baseline values for capillary loop diameter (9.03 ± 0.22 μm) decreased by 21% (7.18 ± 0.28 μm; P = 0.03) during smoking, remained about 9% (8.23 ± 0.18 μm; P = 0.01) lower 5 min after smoking and exceeded baseline values insignificantly by 4% (9.38 ± 0.28 μm; P > 0.05) 10 min after smoking. There were no significant differences to the controls. Conclusion: Reflectance CLSM enables qualitative and quantitative observation of dynamic processes of cutaneous microcirculation on histomorphological level. Microsc. Res. Tech., 2009. © 2008 Wiley‐Liss, Inc.     

Identification of fenestrated capillary segments in microvascular corrosion casts of the rat exocrine pancreas

The capillary bed of the rat exocrine pancreas was studied by scanning and transmission electron microscopy of corrosion casts and tissue sections. Two types of capillaries were distinguished in corrosion casts. First, there were straight capillaries of relatively constant width (mean diameter 4.79±0.87 μm), which were characterized by numerous circular constrictions on their surface. About 37% of the capillaries belonged to this type. Second, there were undulating capillaries which showed smooth surfaced eccentric dilatations defined by similar surface constrictions. The bulging areas measured 8.43 ± 1.33 μm, the constrictions next to the bulges figured for 6.45 ± 1.53 μm. About 63% of the capillaries belonged to the second type. Two types of capillaries were also identified in tissue sections. First, there were capillaries with continuous endothelial lining (26% of capillary profiles; mean diameter 5.48 ± 1.67 μm); 27% of their endothelial lining was provided with underlying pericytes. Second, there were capillaries with fenestrated endothelium (64% of capillary profiles; mean diameter 6.16 ± 1.75 μm); 12% of their endothelial lining was accompanied by pericytes. According to frequency and dimension of these two types of capillaries, we conclude that bulged and undulating capillary casts correspond to fenestrated capillaries and straight capillary casts of constant width correspond to nonfenestrated capillaries. The frequency of crests on the surface of capillary casts correlates with the different frequency of pericyte processes on fenestrated and nonfenestrated capillaries. It is concluded that pericyte processes beneath the endothelium hold resistance against luminal pressure. Bulging areas of capillary casts correlate with fenestrated areas of endothelial lining, that is, areas which are not reinforced by pericyte processes.     

各向异性湿法刻蚀z切石英后结构侧壁形貌的预测

基于石英晶体各晶面的湿法刻蚀速率,研究了石英微结构侧壁形貌的预测方法,讨论了各向异性湿法刻蚀石英的规律.首先,总结了石英各主要晶面的相对刻蚀速率,分别绘制了x、y族刻蚀速率矢量图.然后,在掩模层的边缘处,通过绘制相应的晶面刻蚀速率矢量图,得到各速率矢量的晶面线,晶面线所围成的最小轮廓即是石英微结构的刻蚀形貌.最后,利用该方法预测了x向和y向石英梁的侧壁形貌.在70℃的氢氟酸和氟化铵混合溶液内刻蚀5h,制作了厚度均为500μm的x向和y向两种石英微梁.结果显示,y向梁的-x向侧壁有一均匀整齐的晶棱,棱高210 μm,而+z向侧壁平滑.x向梁的侧壁均有晶棱,+y向晶棱较大,棱高为450 μm,-y向晶棱棱高为240 μm.所制作梁的侧壁形貌与预测结论基本吻合,验证了预测方法的正确性.基于该方法可在石英微结构的设计阶段,通过引入工艺因素对微结构进行优化.     

球透镜耦合效率研究

根据能量积分法计算了球透镜用于激光二极管(LD)与单模光纤(SMF)之间耦合的耦合效率,并对其进行研究。结果表明:当采用单球透镜时,所带来的轴向偏差为±30 μm,横向偏差为±1.0 μm,沿着X-Y平面的轴向倾角偏差为±1.2°;当采用双球透镜时,角向偏差最大,横向偏差次之,轴向偏差最小。     

Design and testing of a fast tool servo for diamond turning

A self-contained and independently servo-operated diamond tool holder was built to increase the resolution and accuracy of a precision lathe. Its static and dynamic repeatability over a range of $\text{± 50 μin (1.27 μm)}$ is better than 0.05 μin (1.3 nm). Its frequency distortion from 0–100 Hz is less than 1.0 μin (25 nm) for a peak displacement of less than 28 μin (0.71 μm).     

数字化微喷射用玻璃基组合微喷嘴设计及实验

为提高液滴微喷射的喷效率和粉体微喷射的喷射方向性,选用普通硼硅酸盐毛细管和石英玻璃管为原材料,基于稳定的拉制和锻制工艺,设计并制作了直列式组合微喷嘴和同轴式组合微喷嘴.在基于微流体数字化的微喷射实验平台上,利用4×2直列式组合微喷嘴单次喷射得到了形状规则、圆整,大小均匀,无卫星液滴的液滴阵列,液滴平均直径为180 μm;相对于单微喷嘴,直列式组合喷嘴提高了单次微喷射的效率.另外,进行了粉体微喷射实验,相对于单微喷嘴,同轴式组合微喷嘴在相同驱动条件下,出射角由33°减小至10°,成形粉线的宽度由450 μm降低至300 μm.结果表明,同轴式组合微喷嘴中的辅助喷嘴有效地约束了主喷嘴出射的粉体流动,粉体喷射的方向性有显著提高.     

Pollen morphological variation of Berberis L. from Pakistan and its systematic importance

Due to overlapping and diverse morphological characters, Berberis is among the most taxonomically complex genera. Palynology is one of the taxonomic tools for delimitation and identification of complex species. In this study, pollens of 10 Berberis species were analyzed through light and scanning electron microscopy. Qualitative as well as quantitative features (pollen shape, size, presence or absence of colpi, colpi length and width, exine thickness, ornamentation, pollen class, aperture, and polar–equatorial ratio) were measured. Five species were observed to have colpate (pantocolpate) with elongated ends, radially symmetrical, isopolar, monads, and psilate‐regulate pollens. In polar view, six pollen were spheroidal, two were ovoid, one spherical, and one oblate. Similarly, variation in pollen length was prominent and the largest pollen on polar view was recorded for B. psodoumbellata 60–65 μm (62.4 ± 0.9), while the smallest one was observed for B. lycium 29–35 μm (32.2 ± 1). The observed variation in both quantitative and qualitative features were important in taxonomic identification. This shows that palynological characters are helpful in identification of Berberis genus at the species level.     

Quantitative analysis of synapse structure with a semiautomatic interactive computer system: A study on identified pyramidal tract neurons in the sensory-motor cortex of cat

Pyramidal tract (Pt) neurons in the sensory-motor cortex of cat were labeled by injection of HRP into the spinal cord. Ultrastructural and quantitative analysis of the synaptic covering of their soma and apical dendrite (up to 100 μm from soma) was undertaken. We intercalated a visual-manual treatment between composite electron micrographs and a fully automated computer system and developed specific programs for evaluation of the morphometric data. Programs are included. A total of 412 synaptic boutons were examined that were found in contact with large Pt neurons. The mean linear percentage of the surface area covered by boutons was 26.2 ± 8.4% and the mean contacting length and cross-sectional area of the bouton profiles were 1.28 ± 0.58 μm and 0.89 ± 0.59 μm², respectively. All types of boutons with active zones accounted for 41.2% of the total. The distribution of two types of bouton (S- and F-type boutons, showing asymmetric and symmetric contacts, respectively) was examined quantitatively. The mean proportion of F-type boutons was 89.1% with a soma and S-type boutons contacting apical dendrites was 10.9%. In addition, GABAergic boutons were identified with the soma by immunocytochemistry with antibodies against glutamic acid decarboxylase. They formed symmetric synaptic contacts with the Pt cells that were identical to those formed by F-type boutons. The quantitative analysis revealed that synaptic clefts are narrower and synaptic vesicles are smaller in symmetric F-type boutons than in S-type boutons forming asymmetric contacts. These data establish that at least three parameters (postsynaptic density, synaptic cleft, and size of vesicles) can be utilized singly or in combination to identify GABAergic inhibitory synapses in neocortex.     

Capturing the elasticity and morphology of live fibroblast cell cultures during degradation with atomic force microscopy

Atomic force microscopy, in a liquid environment, was used to capture in vitro the morphological and mechanical changes that cultured fibroblasts undergo as time elapses from the completion of the cell culture. Topography images illustrated that initially, the nucleus had a height of 1.18 ± 0.2 μm, and after 48 h it had decreased to 550 ± 60 nm; similarly, the cell membrane exhibited significant shrinkage from 34 ± 4 to 23 ± 2 μm. After each image scan, atomic force microscopy indentation was performed on the centre of the nucleus, to measure the changes in the cell elasticity. Examination of the force‐distance curves indicated that the membrane elastic modulus at the nucleus remained the same within the time frame of 48 h, even though the cell morphology had significantly changed.     

An interference technique for measuring the thickness of semi-thin and thick sections

An interference method is described for measuring section thickness in the range 0·3–45 μm. An incident illumination objective incorporating a beam splitter and adjustable reference mirror is used to generate interference fringes by reflection from the upper surfaces of sections on glass slides. Sections do not require a reflective coating. The lateral displacement of the zero-order fringe generated using white light is measured in terms of sodium light fringes and photographic enlargement of the fringes allows measurement to ± 30 nm. The method is simple in operation and allows rapid assessment of any local distortions over the entire section area.