共查询到20条相似文献,搜索用时 15 毫秒
1.
Yann Quinsat Laurent Sabourin 《The International Journal of Advanced Manufacturing Technology》2006,27(11-12):1132-1139
In the field of free form surface machining, CAM software allows one to manage various modes of tool-path generation (zig-zag, spiral, z-level, parallel plan, iso-planar, etc.) leaning on the geometry of the surface to be machined. Various machining strategies can be used for the same shape. Nevertheless the choice of a machining strategy remains an expert field. Indeed there are no precise rules to facilitate the necessary parameter choice for tool-path computation from the analysis of the numerical model of a part and the quality requirements. The objective of this paper is to provide a method to assist in the choice of the machining direction for parallel plane milling of sculptured parts. The influence of the tool-path on the final quality according to the intrinsic geometrical characteristics of the latter (curves, orientation) was studied. The directional beams are introduced and defined from the local surface parameter. Finally a methodology to optimize machining time while guaranteeing a high level of quality was developed and applied to examples . 相似文献
2.
C. Tournier E. Duc 《The International Journal of Advanced Manufacturing Technology》2002,19(5):318-324
The machining of sculptured surfaces such as moulds and dies in 3-axis milling relies on the chordal deviation, the scallop
height parameter and the planning strategy. The choice of these parameters must ensure that manufacturing surfaces respect
the geometrical specifications. The current strategies for machining, consist primarily in driving the tool in parallel planes
which generates a tightening of the tool paths. A constant scallop height planning strategy has been developed to avoid this
tightening. In this paper, we present a new method of constant scallop height tool-path generation based on the concept of
the machining surface. The concept of the machining surface is developed and its use to generate constant scallop height tool
paths is described. The approach is compared with existing methods in terms of precision and in particular its aptitude to
treat curvature discontinuities. 相似文献
3.
4.
S.-H. Yang S.-G. Lee 《The International Journal of Advanced Manufacturing Technology》2002,20(5):326-333
Reduced machining time and increased accuracy for a sculptured surface are both very important when producing complicated parts, so, the step-size and tool-path interval are essential components in high-speed and high-resolution machining. If they are small, the machining time will increase, whereas if they are large, rough surfaces will result. In particular, the machining time, which is a key factor in high-speed machining, is affected by the tool-path interval more than the step size. The conventional method for calculating the tool-path interval is to select a small parametric increment or small increment based on the curvature of the surface. However, this approach has limitations. The first is that the tool-path interval cannot be calculated precisely. The second is that a separate tool-path interval must be calculated in three separate cases. The third is the requirement of a conversion from the Cartesian domain to the parametric domain or vice versa. Accordingly, for high-speed and high-resolution machining, the current study proposes a new tool-path interval algorithm, that does not involve a curvature or any conversion, plus a variable step-size algorithm for NURBS. 相似文献
5.
Generating tool-path with smooth posture change for five-axis sculptured surface machining based on cutter’s accessibility map 总被引:4,自引:4,他引:0
L. L. Li Y. F. Zhang H. Y. Li L. Geng 《The International Journal of Advanced Manufacturing Technology》2011,53(5-8):699-709
In five-axis high speed milling, one of the key requirements to ensure the quality of the machined surface is that the tool-path must be smooth, i.e., the cutter posture change from one cutter contact point to the next needs to be minimized. This paper presents a new method for generating five-axis tool-paths with smooth tool motion and high efficiency based on the accessibility map (A-map) of the cutter at a point on the part surface. The cutter’s A-map at a point refers to its posture range in terms of the two rotational angles, within which the cutter does not have any interference with the part and the surrounding objects. By using the A-map at a point, the posture change rates along the possible cutting directions (called the smoothness map or S-map) at the point are estimated. Based on the A-maps and S-maps of all the sampled points of the part surface, the initial tool-path with the smoothest posture change is generated first. Subsequently, the adjacent tool-paths are generated one at a time by considering both path smoothness and machining efficiency. Compared with traditional tool-path generation methods, e.g., iso-planar, the proposed method can generate tool-paths with smaller posture change rate and yet shorter overall path length. The developed techniques can be used to automate five-axis tool-path generation, in particular for high speed machining (finish cut). 相似文献
6.
鉴于采用等间隔参数法和截面法加工椭球面零件时存在残留量不均匀、表面质量和加工效率不高等缺点,提出采用等残留高度法原理加工椭球面。推导了该方法的加工刀具轨迹算法,并采用VB编程实现了该算法,生成了NC加工程序。加工结果表明,该方法可以满足光学自由曲面的加工精度要求。 相似文献
7.
8.
The progressive cutting based on auxiliary paths is an effective machining method for the material accumulating region inside the mould pocket. But the method is commonly based on the radial depth of cut as the control parameter, further more there is no more appropriate adjustment and control approach. The end-users often fail to set the parameter correctly, which leads to excessive tool load in the process of actual machining. In order to make more reasonable control of the machining load and tool-path, an engagement angle modeling method for multiple-circle continuous machining is presented. The distribution mode of multiple circles, dynamic changing process of engagement angle, extreme and average value of engagement angle are carefully considered. Based on the engagement angle model, numerous application techniques for mould pocket machining are presented, involving the calculation of the milling force in multiple-circle continuous machining, and rough and finish machining path planning and load control for the material accumulating region inside the pocket, and other aspects. Simulation and actual machining experiments show that the engagement angle modeling method for multiple-circle continuous machining is correct and reliable, and the related numerous application techniques for pocket machining are feasible and effective. The proposed research contributes to the analysis and control tool load effectively and tool-path planning reasonably for the material accumulating region inside the mould pocket. 相似文献
9.
5轴混联加工单元因其高刚性、快速响应及灵活调姿等优点,已被视为复杂铝合金结构件高效加工的一种替代方案。后置处理是改善此类装备加工能力的重要环节。以一种新型5轴混联加工单元为研究对象,提出一种可提高其加工件表面质量的后置处理算法。首先,基于B样条曲线构造一种双参数曲线插补算法,进行刀尖和刀轴轨迹的光顺处理,并采用参数同步化保证刀尖点与刀轴点的同步插补。其次,通过推导混联加工单元的速度映射模型,构造驱动轴的速度分配算法以确保刀尖进给速度的稳定性;接着,运用混联加工单元的位置逆解与速度分配策略,将其末端的进给速度、光顺处理后的刀尖插补点及刀轴插补点转换成驱动轴的位置与速度运动控制点集,实现混联加工单元刀具轨迹的后置处理;最后,基于前期开发的实验样机开展一组S形试件的切削实验,验证所提后置处理算法的有效性。 相似文献
10.
Li-Chang Chuang Hong-Tsu Young 《The International Journal of Advanced Manufacturing Technology》2007,34(11-12):1062-1071
In mechanical engineering, most products or components, especially those for aerospace applications, are designed to fit the requirements of free-form surface features. The impeller often required by 5-axis machine operations is a key component of the aerospace industry. When 3-axis CNC machining center is used to manufacture the impeller, great difficulties, i.e., collisions between the cutting tool and impeller, need to be overcome. Presently most commercial CAM systems for 5-axis control lack generality, and functions for the rough tool-path generation are far from sufficient. Although the rough machining is the most important procedure influencing the machining efficiency and the condition for the following finishing process, many difficulties arise in performing 5-axis rough machining. The main objective of the present study is to overcome this problem by integrating the state-of-art machining technology, and consequently effective rough tool-paths are to be generated. This study aims to implement the algorithm of the constant scallop height method to improve tool-path planning of rough machining. As a result CL data based on the geometry model of blade and hub are generated. The CL data are confirmed by comparing them with original CAD model through software simulations and later by machining experiments. The verification results show that the machining methodology and procedure adopted turn out to be a successful case. 相似文献
11.
12.
13.
14.
以UG自动编程软件体系架构为依据,研究大型混流式水轮机叶片多轴数控加工方法。探讨提高叶片加工质量和效率的途径。介绍大型水轮机叶片五轴联动数控加工雕塑曲面编程中涉及到的转轮叶片三维造型、切削仿真、刀具轨迹生成等关键技术。该方案切削力小、加工精度高、成本低,具有一定的参考价值。 相似文献
15.
An Effective Global Gouge Detection in Tool-Path Planning for Freeform Surface Machining 总被引:1,自引:0,他引:1
L. Zhou Y.-J. Lin 《The International Journal of Advanced Manufacturing Technology》2001,18(7):461-473
This paper examines a usually neglected gouge phenomenon in tool-path planning for machining parts having freeform surfaces with 3-axis ball-end mills. That is, when a freeform surface is being milled with a ball-end cutter, a gouge may exist anywhere around the cutter circumference, in addition to the tool driving plane. A global gouge detection concept is developed to solve this problem. An effective method is proposed to identify the potential gouge areas on the sculptured surface during machining, before generating tool paths. Thus, it greatly simplifies the tool-path planning procedure and improves the accuracy and reliability of machining. It also facilitates geometric design processes of products and cutter radius selection which are crucial to machining efficiency. The designed part surfaces tested by the proposed methodology are constructed based on bicubic B2-splines and are assumed to be at least C 2 and may possess C 1 or C 0 continuity for generality. The tested examples demonstrate the effectiveness of the developed global gouge detection approach.
This revised version with a corrected online cover date was published online in April 2004. 相似文献
16.
17.
18.
针对复杂多曲面通道的多坐标数控粗加工,提出了一种新的刀具轨迹生成算法.该算法以传统的插铣加工方法为基础,提出适合于复杂多曲面通道的新插铣方法;利用曲面参数线,使用B样务曲线正算反算方法,在流道划分的多个截面上做由初始孔到截面轮廓的渐变曲线;通过计算满足残留高度的走刀行距,在各个截面的渐变曲线上提取参数点并拟合出相应曲线,进而得到刀具接触点轨迹. 相似文献
19.
20.
Complex pockets with one or more islands have been widely used in industrial and manufacturing production. In this paper, a new double spiral tool-path generation and linking method are proposed for complex pockets with islands which can be used for high-speed machining (HSM) is used. Taking into account the path interval, step length and other processing parameters, precise milling can be achieved without cutter lifting and retraction motions to guarantee machining accuracy and reduce processing time. The method has been implemented in several simulations and validated successfully through the actual machining of a complicated pocket. The results indicate that this method is superior to other existing machining methods, and it can achieve HSM of complicated shaped pockets based on parametric surface. 相似文献