Dual-purpose vardenafil hydrochloride/dapoxetine hydrochloride orodispersible tablets: in vitro formulation/evaluation,stability study and in vivo comparative pharmacokinetic study in healthy human subjects

Erectile dysfunction (ED) is the most important disorder after premature ejaculation for sexual activity in men. Vardenafil hydrochloride (VH) is an oral therapy for the treatment of erectile dysfunction. VH oral disintegrating tablets (ODTs) have been prepared by freeze drying technique to improve its dissolution profile and the overall clinical performance. Dapoxetine hydrochloride (DH) was added to the best three formulae of the prepared VH ODTs to treat premature ejaculation. All the ODTs formulae were evaluated for weight variation, friability, drug content, in vitro disintegration time, wetting time, and the dissolution study. Gelatin as a matrix former with N-methylpyrrolidone as a solubilizer in VH/DH ODTs improved the dissolution rate and extent of release of VH and DH with 100% of drug being dissolved after 15?min. In vivo study results from six healthy male volunteers showed shorter T_max of VH from VH/DH ODT of 0.583?±?0.129?h and shorter T_max of DH from VH/DH ODT of 0.625?±?0.137?h and showed AUC_0–12 of VH from VH/DH ODT of 39.234?±?10.932?ng/ml^?h¹ and AUC_0–12 of DH from VH/DH ODT of 531.681?±?129.544?ng/ml^?h¹, with relative bioavailability values of 100.9 and 85%, respectively, compared to (Levitra^®) and (Priligy^®).     

Formulation studies for mirtazapine orally disintegrating tablets

Abstract

Objective: Orally disintegrating tablets (ODTs) recently have gained much attention to fulfill the needs for pediatric, geriatric, and psychiatric patients with dysphagia. Aim of this study was to develop new ODT formulations containing mirtazapine, an antidepressant drug molecule having bitter taste, by using simple and inexpensive preparation methods such as coacervation, direct compression and to compare their characteristics with those of reference product (Remereon SolTab).

Materials and methods: Coacervation method was chosen for taste masking of mirtazapine. In vitro characterization studies such as diameter and thickness, weight variation, tablet hardness, tablet friability and disintegration time were performed on tablet formulations. Wetting time and in vitro dissolution tests of developed ODTs also studied using 900?mL 0.1?N HCl medium, 900?mL pH 6.8 phosphate buffer or 900?mL pH 4.5 acetate buffer at 37?±?0.2?°C as dissolution medium.

Results: Ratio of Eudragit® E-100 was chosen as 6% (w/w) since the dissolution profile of A1 (6% Eudragit® E-100) was found closer to the reference product than A2 (4% Eudragit® E-100) and A3 (8% Eudragit® E-100). Group D, E and F formulations were presented better results in terms of disintegration time. Dissolution results indicated that Group E and F formulations showed optimum properties in all three dissolution media.

Discussion: Formulations D1, D4, D5, E3, E4, F1 and F5 found suitable as ODT formulations due to their favorable disintegration times and dissolution profiles.

Conclusion: Developed mirtazapine ODTs were found promising in terms of showing the similar characteristics to the original formulation.     

Formulation design,in vitro characterizations and anti-malarial investigations of artemether and lumefantrine-entrapped solid lipid microparticles

Context: Poor aqueous solubility of artemether and lumefantrine makes it important to seek better ways of enhancing their oral delivery and bioavailability.

Objective: To formulate and carry out in vitro and anti-malarial pharmacodynamic evaluations of solidified reverse micellar solutions (SRMS)-based solid lipid microparticles (SLMs) of artemether and lumefantrine for oral delivery and improved bioavailability.

Materials and methods: Rational blends of Softisan^®154 and Phospholipon^®90H lipid matrices, and different concentrations of artemether and lumefantrine were used to formulate several batches of SLMs. Drug-free SLMs were also formulated. Morphology, particle size, encapsulation efficiency (EE%) and pH studies were performed. In vitro release studies were performed in alcoholic buffer, simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) without enzymes. Anti-malarial pharmacodynamic studies were conducted in mice.

Results: Stable, smooth and spherical particles with sizes ranging from 4.2?±?0.02 to 9.3?±?0.8?µm were formed. EE% of 92.2–97.3% and 30.2–84.7% and pH of 3.0?±?0.02 to 4.9?±?0.12 and 3.0?±?0.02 to 5.8?±?0.05 were obtained for artemether and lumefantrine SLMs, respectively. Release of 100, 88.28 and 75.49%, as well as 63.26, 34.31 and 56.17% were recorded for artemether and lumefantrine in alcoholic buffer, SGF and SIF, respectively. Pharmacodynamic studies indicated very significant (p?Conclusion: Oral delivery and bioavailability of artemether and lumefantrine could be improved using SRMS-based SLMs.     

Taste-masked and affordable donepezil hydrochloride orally disintegrating tablet as promising solution for non-compliance in Alzheimer’s disease patients

Context: Manufacturing process and superdisintegrants used in orally disintegrating tablet (ODT) formulation are often time discussed. However, the effect of suitable filler for ODT formulation is not explored thoroughly.

Objective: The aim of this study was to develop a novel taste masked and affordable donepezil hydrochloride ODT with fast disintegration time and stable to improve medication compliance of Alzheimer’s disease patient.

Methods and materials: The ODT was manufactured using simple wet-granulation method. Crospovidone XL-10 was used as superdisintegrant and optimization was done by comparing the effect of three grades of lactose monohydrate compound as filler: Starlac®, Flowlac® and Tablettose®.

Results and discussion: Formulations containing higher amount of colloidal silicon dioxide showed increase in hardness, weight, disintegration time and wetting time after stability study. Formulation E which containing 50% of Starlac® was found with shortest in vitro disintegration time (21.7?±?1.67?s), in vivo disintegration time (24.0?±?1.05?s) and in vitro disintegration time in artificial salvia (22.5?±?1.67?s). Physical stability studies at 40?°C/75% RH for 6 months, Fourier transform infrared spectroscopy analysis and X-ray diffraction results showed that the formulation was stable. The drug-released profile showed that 80% of donepezil hydrochloride was released within 1?min. A single-dose, fasting, four-period, seven-treatment, double-blinded study involving 16 healthy human volunteers was performed to evaluate the palatability of ODT. Formulation VII containing 10?mg of ammonium glycyrrhizinate was able to mask the bitter taste of the drug.

Conclusion: The product has the potential to be commercialized and it might serve as solution for non-compliance among the Alzheimer’s disease patients.     

Intradermal and follicular delivery of adapalene liposomes

Abstract

Background: Adapalene is a widely used topical anti-acne drug; however, it has many side effects. Liposomal drug delivery can play a major role by targeting delivery to pilosebaceous units, reducing side effects and offering better patient compliance.

Objective: To prepare and evaluate adapalene-encapsulated liposomes for their physiochemical and skin permeation properties.

Methods: A liposomal formulation of adapalene was prepared by the film hydration method and characterized for shape, size, polydispersity index (PDI), encapsulation efficiency and thermal behavior by techniques such as Zetasizer®, differential scanning calorimetry and transmission electron microscopy. Stability of the liposomes was evaluated for three months at different storage conditions. In vitro skin permeation studies and confocal laser microscopy were performed to evaluate adapalene permeation in pig ear skin and hair follicles.

Results: The optimized process and formulation parameters resulted in homogeneous population of liposomes with a diameter of 86.66?±?3.5?nm in diameter and encapsulation efficiency of 97.01?±?1.84% w/w. In vitro permeation studies indicated liposomal formulation delivered more drug (6.72?±?0.83?μg/cm²) in hair follicles than gel (3.33?±?0.26?μg/cm²) and drug solution (1.62?±?0.054?μg/cm²). Drug concentration delivered to the skin layers was also enhanced compared to other two formulations. Confocal microscopy images confirmed drug penetration in the hair follicles when delivered using the liposomal formulation.

Conclusion: Adapalene was efficiently encapsulated in liposomes and led to enhanced delivery in hair follicles, the desired target site for acne.     

In vitro and in vivo investigation of taste-masking effectiveness of Eudragit E PO as drug particle coating agent in orally disintegrating tablets

Abstract

Context: Considering that bitter taste of drugs incorporated in orally disintegrating tablets (ODTs) can be the main reason for avoiding drug therapy, it is of the utmost importance to achieve successful taste-masking. The evaluation of taste-masking effectiveness is still a major challenge.

Objective: The objective of this study was to mask bitter taste of the selected model drugs by drug particle coating with Eudragit^® E PO, as well as to evaluate taste-masking effectiveness of prepared ODTs using compendial dissolution testing, dissolution in the small-volume shake-flask assembly and trained human taste panel.

Materials and methods: Model drugs were coated in fluidized bed. Disintequik? ODT was used as a novel co-processed excipient for ODT preparation. Selected formulations were investigated in vitro and in vivo using techniques for taste-masking assessment.

Results and discussion: Significantly slower drug dissolution was observed from tablets with coated drug particles during the first 3?min of investigation. Results of in vivo taste-masking assessment demonstrated significant improvement in drug bitterness suppression in formulations with coated drug. Strong correlation between the results of drug dissolution in the small-volume shake-flask assembly and in vivo evaluation data was established (R?≥?0.970).

Conclusion: Drug particle coating with Eudragit^® E PO can be a suitable approach for bitter taste-masking. Strong correlation between in vivo and in vitro results implicate that small-volume dissolution method may be used as surrogate for human panel taste-masking assessment, in the case of physical taste-masking approach application.     

Development and evaluation of orally disintegrating tablets of cilostazol-β-cyclodextrin inclusion complexes

Context: The clinical applications of cilostazol (CLZ) are limited by its low aqueous solubility (<5?µg/ml) and high biovariability.

Objective: The aim of this study was to enhance the solubility of CLZ by forming inclusion complexes (ICs) with beta cyclodextrin (β-CD) and formulating them into oral disintegrating tablets.

Methods: Phase solubility study of CLZ with β-CD was performed in water. Job’s plot was constructed to determine the stoichiometry of ICs. ICs, prepared by spray-drying technique, were characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, hot stage microscopy, powder X-ray diffraction and nuclear magnetic resonance. Molecular modeling studies were performed to understand the mode of interaction of CLZ with β-CD. The formulation process was undertaken using a reproducible design of experiment generated model, attained by variation of diluents and disintegrants at three levels. Tablets were evaluated for drug content, hardness, friability, disintegration time (DT), wetting time (WT) and dissolution profiles.

Results and discussion: Phase solubility studies suggested an A_L type curve with stability constant (K_s) of 922.52?M^?1. Job’s plot revealed 1:2 stoichiometry. All analytical techniques confirmed inclusion complexation. Molecular modeling revealed dispersive van der Waals interaction energy as a major contributor for stabilization of complex. The spray-dried complexes showed higher solubility and faster dissolution compared to plain CLZ. The optimized formulation showed DT of 11.1?±?0.8?s, WT of 8.7?±?0.9?s and almost complete dissolution of CLZ in 15?min.

Conclusion: The prepared tablets with low DT and fast dissolution will prove to be a promising drug delivery system with improved bioavailability and better patient compliance.     

Upgrading of dissolution and anti-hypertensive effect of Carvedilol via two combined approaches: self-emulsification and liquisolid techniques

Objective: The aim of the study was to design a self-emulsifying drug delivery system (SEDDS) of the anti-hypertensive Carvedilol in liquid and liquisolid forms as a way to enhance its dissolution profile and anti-hypertensive effect.

Methods: Solubility studies of Carvedilol in various oils, surfactants and co-surfactants were conducted, followed by the construction of pseudo-ternary phase diagrams and other in vitro assessments. The selected SEDDS formulation (S1) was adsorbed onto solid powder excipients and compressed into tablets. The resulting liquisolid tablets were evaluated under British Pharmacopoeia (B.P.) specifications. Pre- and post-compression studies were performed to determine the flow properties and evaluate the liquisolid systems, followed by in vivo studies in hypertensive rats.

Results: Attempts of self-emulsification, droplet size, and thermodynamic stability studies showed acceptable results for the S1 formulation containing Capryol 90, Tween 20, and Transcutol HP (10:53.3:26.2%), respectively. Pre-compression studies showed adequate flowability and compatibility of liquid and solid excipients with Carvedilol. The selected liquisolid tablet (LS7) demonstrated the best disintegration and water absorption ratio in addition to satisfactory friability and hardness. A significantly (p?®. The in vivo study of LS7 formulation revealed a rapid significant (p?®.

Conclusion: Self-emulsifying liquisolid tablets expressed rapid onset of action with enhanced anti-hypertensive effect of Carvedilol.     

Preparation and evaluation of self-assembly Soluplus®-sodium cholate-phospholipid ternary mixed micelles of docetaxel

Abstract

Ternary mixed micelles constituted of Soluplus^®, sodium cholate, and phospholipid were prepared as nano-delivery system of the anticancer drug, docetaxel. The formulation of docetaxel-loaded ternary mixed micelles (DTX-TMMs) with an optimized composition (Soluplus^®/sodium cholate/phospholipid= 3:2:1 by weight) were obtained. The main particle size of DTX-TMMs was 76.36?±?2.45?nm, polydispersity index (PDI) was 0.138?±?0.039, and the zeta potential was ?8.46?±?0.55?mv. The encapsulation efficiency was 94.24?±?4.30% and the drug loading was 1.25%. The critical micelle concentration value was used to assess the ability of carrier materials to form micelles. The results indicated that the addition of Soluplus^® to sodium cholate-phospholipid mixed micelles could reduce the critical micelle concentration and improve the stability. In vitro release studies demonstrated that compared with DTX-Injection group, the DTX-TMMs presented a controlled release property of drugs. In vivo pharmacodynamics results suggested that DTX-TMMs had the most effective inhibitory effect on tumor proliferation and had good biosafety. In addition, the relative bioavailability of mixed micelles was increased by 1.36 times compared with the DTX-Injection in vivo pharmacokinetic study indicated that a better therapeutic effect could be achieved. In summary, the ternary mixed micelles prepared in this study are considered to be promising anticancer drug delivery systems.     

Improved dissolution rate and bioavailability of fenofibrate pellets prepared by wet-milled-drug layering

Objective: The objective of this study is to investigate the wet-milled-drug layering process which could significantly improve the dissolution rate and oral bioavailability of fenofibrate pellets.

Methods: Fenofibrate was milled with HPMC-E5 to prepare a uniform suspension in the micrometer and nanometer range, and this suspension was then layered on to sugar spheres to form the pellets (F1, F2).

Results: The particle size was significantly reduced (from 1000 µm to 1–10 µm and 400?nm) but the fenofibrate in suspension retained its crystallinity from the results of DSC and PXRD investigations. The dissolution rate of F1-F2 and Antara® capsules was 55.47 %, 61.27 % and 58.43 %, respectively, in 0.01?mol/L SDS solution over 60?min. In addition, F1, F2, and Antara® capsules were given orally to 6 beagle dogs to determine the bioavailability. The C_max of F1, F2 (8.21?±?2.55 and 9.33?±?2.37 μg/mL)and the AUC_(0?t) of F1, F2 (152.46?±?78.89 and 172.17?±?67.58 μg/mL·h)were higher than those of Antara® (6.02?±?3.34 μg/mL and 89.82?±?46.46 μg/mL·h) and, F1, F2 reached their C_max earlier than Antara® (F1: 2.0?±?1.1?h; F2: 1.8?±?1.2?h; Antara®: 6.0?±?8.9?h).

Conclusion: These results show that the wet-milled-drug layering technique is a powerful method to improve the dissolution rate and the bioavailability of fenofibrate.     

In vitro and in vivo effects of morin on the intestinal absorption and pharmacokinetics of olmesartan medoxomil solid dispersions

Abstract

Purpose: In-situ evaluation to corroborate morin effects on the intestinal absorption and pharmacokinetic behavior of freeze-dried OLM-loaded solid dispersions with Caco-2 and in-vivo studies

Methods: Intestinal transport and absorption studies were examined by Caco-2 permeability, in-situ single pass perfusion and closed-loop models along with in-vivo pharmacokinetic studies to evaluate and confirm the effect of P-gp-mediated activity of morin. We evaluated the intestinal membrane damage in the presence of morin by measuring the release of protein and lactate dehydrogenase (LDH) followed by using qualitative and quantitative morphometric analysis to describe the surface characteristics of intestinal epithelium.

Results: Morin showed the highest P_eff value 13.8?±?0.34?×?10^?6?cm/s in jejunum than ileum (p?<?.01) at 100?µM with absorption enhancement of 1.31-fold together with enhanced (p?<?.01) secretory transport of 6.27?±?0.27?×?10?^?6?cm/s in Caco-2 monolayer cells. Our findings noticed 2.37 (in-situ); 2.39 (in-vivo) and 1.43 (in-situ); 1.36 (in-vivo) fold increase in AUC_0–t with elevated C_max and shortened T_max for freeze-dried solid dispersion in the presence of morin as compared to pure OLM and freeze-dried solid dispersions without morin, respectively.

Conclusions: Our study demonstrated that increased solubilization through freeze-dried OLM-loaded solid dispersion together with efflux inhibition improved intestinal permeability to one system that might lead to novel solubilization and efflux pump inhibition as a novel alternative potential to increase oral absorption and bioavailability of OLM.     

Formulation design and optimization of novel soft glycerosomes for enhanced topical delivery of celecoxib and cupferron by Box–Behnken statistical design

Background: The present study describes glycerosomes (vesicles composed of phospholipids, glycerol and water) as a novel drug delivery system for topical application of celecoxib (CLX) and cupferron (CUP) compound.

Aim: The goal of this research was to design topical soft innovative vesicles loaded with CLX or CUP for enhancing the efficacy and avoiding systemic toxicity of CLX and CUP.

Methods: CLX and CUP loaded glycerosomes were prepared by hydrating phospholipid-cholesterol films with glycerol aqueous solutions (20–40%, v/v). Box–Behnken design, using Design-Expert® software, was the optimum choice to statistically optimize formulation variables. Three independent variables were evaluated: phospholipid concentration (X₁), glycerol percent (X₂) and tween 80 concentration (X₃). The glycerosomes particle size (Y₁), encapsulation efficiency percent (Y₂: EE %) and drug release (Y₃) were selected as dependent variables. The anti-inflammatory effect of CLX and CUP glycerosomal gel was evaluated by carrageenan-induced rat paw edema method followed by histopathological studies.

Results: The optimized formulations (CLX2* and CUP1*) showed spherical morphology under transmission electron microscopy, optimum particle size of 195.4?±?3.67?nm, 301.2?±?1.75?nm, high EE of 89.66?±?1.73%, 93.56?±?2.87%, high drug release of 47.08?±?3.37%, 37.60?±?1.89% and high cumulative amount of drug permeated in 8?h of 900.18?±?50.24, 527.99?±?34.90?µg.cm^?2 through hairless rat skin, respectively. They also achieved significant remarkable paw edema inhibition in comparison with the control group (p? Conclusion: Finally, the administration of CLX2* and CUP1* loaded glycerosomal gel onto the skin resulted in marked reduction of edema, congestive capillary and inflammatory cells and this approach may be of value in the treatment of different inflammatory disorders.     

Development and evaluation of a novel drug delivery: Soluplus®/TPGS mixed micelles loaded with piperine in vitro and in vivo

Background: Although piperine can inhibit cells of tumors, the poor water solubility restricted its clinical application. This paper aimed to develop mixed micelles based on Soluplus^® and D-α-tocopherol polyethylene glycol succinate (TPGS) to improve the aqueous solubility and anti-cancer effect.

Methods: Piperine-loaded mixed micelles were prepared using a thin-film hydration method, and their physicochemical properties were characterized. The cellular uptake of the micelles was confirmed by confocal laser scanning microscopy in A549 lung cancer cells and HepG₂ liver cancer cells. In addition, cytotoxicity of the piperine mixed micelles was studied in A549 lung cancer cells and HepG₂ liver cancer cells. Free piperine or piperine-loaded Soluplus^®/TPGS mixed micelles were administered at an equivalent dose of piperine at 3.2?mg/kg via a single intravenous injection in the tail vain for the pharmacokinetic study in vivo.

Results: The diameter of piperine-loaded Soluplus^®/TPGS (4:1) mixed micelles was about 61.9?nm and the zeta potential –1.16?±?1.06?mV with 90.9% of drug encapsulation efficiency and 4.67% of drug-loading efficiency. Differential scanning calorimetry (DSC) studies confirmed that piperine is encapsulated by the Soluplus^®/TPGS. The release results in vitro showed that the piperine-loaded Soluplus^®/TPGS mixed micelles presented sustained release behavior compared to the free piperine. The mixed micelles exhibited better antitumor efficacy compared to free piperine and physical mixture against in A549 and HepG₂ cells by MTT assay. The pharmacokinetic study revealed that the AUC of piperine-loaded mixed micelles was 2.56 times higher than that of piperine and the MRT for piperine-loaded mixed micelles was 1.2-fold higher than piperine (p?Conclusion: The results of the study suggested that the piperine-loaded mixed micelles developed might be a potential nano-drug delivery system for cancer chemotherapy. These results demonstrated that piperine-loaded Soluplus^®/TPGS mixed micelles are an effective strategy to deliver piperine for cancer therapy.     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Comparative binder efficiency modeling of dry granulation binders using roller compaction

Roller compaction parameters’ impact on granules and tableting properties of coprocessed Avicel^® DG [ADG], a physical mixture of the two components at the same composition present in ADG [PADCP], and microcrystalline cellulose and Kollidon^® VA-64 Fine physical mixture [KVA64] was quantified by analysis of variance (ANOVA) and multivariate methods. Roller force, roller gap, and roller speed levels were selected for evaluation. A 3³ full-factorial experimental design with three center points for roller force, roller gap, and roller speed was used. The response parameters studied were granule-to-fines (GF) ratio, compressibility index (CI), tablet thickness (TT), tablet friability (TF), tablet breaking force (TBF) and disintegration time (DT). A model acetaminophen tablet formulation was roller granulated and tableted at 10?kg scale. Principal component analysis of ADG and PADCP formulations were separated from KVA64 formulations, indicating different granule and tableting properties were binder dependent. This difference in binder performance was also confirmed by ANOVA. The ANOVA also showed that there were no statistical performance differences between coprocessed ADG and its comparable physical blend with the exception of TT. Principal component regression (PCR) analyses of ADG and PADCP revealed that these excipients exhibited a statistically significant negative effect on granules-to-fine (GF) ratio, TT, TBF, and DT. KVA64 demonstrated a positive effect on these parameters. The KVA64 physical mixture demonstrated an overall better performance and binding capability. This study strongly suggests that there is no performance advantage of coprocessed Avicel^® DG when compared to a physical mixture of the two components at the same composition.     

Design and evaluation of mucoadhesive vaginal tablets of tenofovir disoproxil fumarate for pre-exposure prophylaxis of HIV

Objective: To design and evaluate novel, feasible, safe, mucoadhesive intravaginal tablets of tenofovir disoproxil fumarate (TDF).

Significance: It may provide pre-exposure prophylaxis for women against HIV.

Methods: TDF intravaginal tablets were formulated employing poylvinylpyrrolidone (PVP) as the matrix forming polymer and various mucoadhesive polymers such as carbopol 934, 940, chitosan, and sodium carboxymethylcellulose (SCMC). Wet granulation was used. The evaluation involved testing drug-excipient compatibility, precompression parameters such as percentage yield, bulk density and tapped density of the granules, Carr’s index, Hausner ratio, angle of repose, post compression parameters such as color, shape, physical dimensions, weight variation, hardness, friability, swelling index, assay, in vitro dissolution study and ex vivo mucoadhesion studies.

Results: Based on in vitro evaluation, C1 was selected as the best formulation and evaluated further for release kinetics, curve fitting analysis, absorption studies using liquid chromatography-mass spectrometry (LC-MS) technique and histopathological assessment in female Sprague–Dawley rats. C1 followed Higuchi model kinetics. Accelerated stability study was as per ICH guidelines by keeping C1 at 40?±?2?°C and 75?±?5% RH for six months.

Conclusions: C1 was selected as the best formulation due to better swelling index (65.93% at 24?h), prolonged release of 100.62% cumulative drug release (CDR) at 24?h, superior mucoadhesion force (35.93?×?10² dynes/cm²) and retention time (16?h). The study revealed that C1 remained stable for six months. C1 showed nil systemic absorption which is desirable and according to histopathological study, C1, exhibited minimal damage on the rat vaginal epithelium indicating safety.     

Development and gamma-scintigraphy study of Hibiscus rosasinensis polysaccharide-based microspheres for nasal drug delivery

Objective: This work describes the application of natural plant polysaccharide as pharmaceutical mucoadhesive excipients in delivery systems to reduce the clearance rate through nasal cavity.

Methods: Novel natural polysaccharide (Hibiscus rosasinensis)-based mucoadhesive microspheres were prepared by using emulsion crosslinking method for the delivery of rizatriptan benzoate (RB) through nasal route. Mucoadhesive microspheres were characterized for different parameters and nasal clearance of technetium-99m (^99mTc)-radiolabeled microspheres was determined by using gamma-scintigraphy.

Results: Their Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) studies showed that the drug was stable during preparation of microspheres. Aerodynamic diameter of microspheres was in the range 13.23?±?1.83–33.57?±?3.69?µm. Change in drug and polysaccharide ratio influenced the mucoadhesion, encapsulation efficiency and in-vitro release property. Scintigraphs taken at regular interval indicate that control solution was cleared rapidly from nasal cavity, whereas microspheres showed slower clearance (p?Conclusion: Natural polysaccharide-based microspheres achieved extended residence by minimizing effect of mucociliary clearance with opportunity of sustained delivery for longer duration.     

Nanocarrier-based topical drug delivery for an antifungal drug

Objective: The conventional liposomal amphotericin B causes many unwanted side effects like blood disorder, nephrotoxicity, dose-dependent side effects, highly variable oral absorption and formulation-related instability. The objective of the present investigation was to develop cost-effective nanoemulsion as nanocarreir for enhanced and sustained delivery of amphotericin B into the skin.

Methods and characterizations: Different oil-in-water nanoemulsions were developed by varying the composition of hydrophilic (Tween® 80) surfactants and co-surfactant by the spontaneous titration method. The developed formulation were characterized, optimized, evaluated and compared for the skin permeation with commercial formulation (fungisome 0.01% w/w). Optimized formulations loaded with amphotericin B were screened using varied concentrations of surfactants and co-surfactants as decided by the ternary phase diagram.

Results and discussion: The maximum % transmittance obtained were 96.9?±?1.0%, 95.9?±?3.0% and 93.7?±?1.2% for the optimized formulations F-I, F-III and F-VI, respectively. These optimized nanoemulsions were subjected to thermodynamic stability study to get the most stable nanoemulsions (F-I). The results of the particle size and zeta potential value were found to be 67.32?±?0.8 nm and –3.7?±?1.2?mV for the final optimized nanoemulsion F-I supporting transparency and stable nanoemulsion for better skin permeation. The steady state transdermal flux for the formulations was observed between 5.89?±?2.06 and 18.02?±?4.3?µg/cm²/h whereas the maximum enhancement ratio were found 1.85- and 3.0-fold higher than fungisome and drug solution, respectively, for F-I. The results of the skin deposition study suggests that 231.37?±?3.6?µg/cm² drug deposited from optimized nanoemulsion F-I and 2.11-fold higher enhancement ratio as compared to fungisome. Optimized surfactants and co-surfactant combination-mediated transport of the drug through the skin was also tried and the results were shown to have facilitated drug permeation and skin perturbation (SEM).

Conclusion: The combined results suggested that amphotericin B nanoemulsion could be a better option for localized topical drug delivery and have greater potential as an effective, efficient and safe approach.     

Nanostructured lipid carriers loaded with simvastatin: effect of PEG/glycerides on characterization,stability, cellular uptake efficiency and in vitro cytotoxicity

Objective: The aim of this study is to evaluate the use of PEG/glycerides of different HLB; oleoyl macrogol-6-glycerides (Labrafil^® M 1944 CS) and caprylocaproylmacrogol-8-glycerides (Labrasol^®), compared to Labrafac lipophile^® as PEG-free glyceride in the preparation of nanostructured lipid carriers (NLCs). PEG/glycerides are suggested to perform a dual function; as the oily component, and as the PEG-containing substrate required for producing the PEGylated carriers without physical or chemical synthesis.

Methods: Lipid nanocarriers were loaded with simvastatin (SV) as a promising anticancer drug. An optimization study of NLC fabrication variables was first conducted. The effect of lyophilization was investigated using cryoprotectants of various types and concentrations. The prepared NLCs were characterized in terms of particle size (PS), size distribution (PDI), zeta potential (ZP), drug entrapment, in vitro drug release, morphology and drug–excipient interactions. The influence of glycerides?±?PEG on the cytotoxicity of SV was evaluated on MCF-7 breast cancer cells, in addition to the cellular uptake of fluorescent blank NLCs.

Results: The alteration between different oil types had a significant impact on PS, ZP and drug release. Both sucrose and trehalose showed the lowest increase in PS and PDI of the reconstituted lyophilized NLCs. The in vitro cytotoxicity and cellular uptake studies indicated that SV showed the highest antitumor effect on MCF-7 cancer cells when loaded into Labrasol^® NLCs demonstrating a high cellular uptake as well.

Conclusion: The study confirms the applicability of PEG/glycerides in the development of NLCs. Encapsulating SV in Labrasol^®-containing NLC could enhance the antitumor effect of the drug.     

Enhanced stability and permeation potential of nanoemulsion containing sefsol-218 oil for topical delivery of amphotericin B

Aim: To characterize the enhanced stability and permeation potential of amphotericin B nanoemulsion comprising sefsol-218 oil at varying pH and temperature of aqueous continuous phase.

Methodology: Several batches of amphotericin B loaded nanoemulsion were prepared and evaluated for their physical and chemical stability at different pH and temperature. Also, a comparative study of ex vivo drug permeation across the albino rat skin was investigated with commercial Fungisome® and drug solution at 37?°C for 24?h. The extent of drug penetrated through the rat skin was thereby evaluated using the confocal laser scanning microscopy (CLSM).

Results and conclusions: The optimized nanoemulsion demonstrated the highest flux rate 17.85?±?0.5?µg/cm²/h than drug solution (5.37?±?0.01?µg/cm²/h) and Fungisome® (7.97?±?0.01?µg/cm²/h). Ex vivo drug penetration mechanism from the developed formulations at pH 6.8 and pH 7.4 of aqueous phase pH using the CLSM revealed enhanced penetration. Ex vivo drug penetration studies of developed formulation comprising of CLSM revealed enhanced penetration in aqueous phase at pH 6.8 and 7.4. The aggregation behavior of nanoemulsion at both the pH was found to be minimum and non-nephrotoxic. The stability of amphotericin B was obtained in terms of pH, optical density, globular size, polydispersity index and zeta potential value at different temperature for 90 days. The slowest drug degradation was observed in aqueous phase at pH 7.4 with shelf life 20.03-folds higher when stored at 4?°C (3.8 years) and 5-fold higher at 25?°C (0.951 years) than at 40?°C. The combined results suggested that nanoemulsion may hold an alternative for enhanced and sustained topical delivery system for amphotericin B.