Cu<Superscript>2+</Superscript> and Al<Superscript>3+</Superscript> co-substituted cobalt ferrite: structural analysis,morphology and magnetic properties

Cu–Al substituted Co ferrite nanopowders, Co_1?x Cu _x Fe_2?x Al _x O₄ (0.0 ≤ x ≤ 0.8) were synthesized by the co-precipitation method. The effect of Cu–Al substitution on the structural and magnetic properties have been investigated. X-ray diffraction (XRD) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) and vibrating sample magnetometer (VSM) are used for studying the effect of variation in the Cu–Al substitution and its impact on particle size, magnetic properties such as M _s and H _c . Cu–Al substitution occurs and produce a secondary phase, α-Fe ₂ O ₃. The crystallite size of the powder calcined at 800 ^°C was in the range of 19–26 nm. The lattice parameter decreases with increasing Cu–Al content. The nanostructural features were examined by FESEM images. Infrared absorption (IR) spectra shows two vibrational bands; at around 600 (v ₁) and 400 cm ^?1 (v ₂). They are attributed to the tetrahedral and octahedral group complexes of the spinel lattice, respectively. It was found that the physical and magnetic properties have changed with Cu–Al contents. The saturation magnetization decreases with the increase in Cu–Al substitution. The reduction of coercive force, saturation magnetization and magnetic moments are may be due to dilution of the magnetic interaction.     

The Effect of Annealing on Phase Stability and Magnetic Properties of Hexaferrite BaFe<Subscript>12</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>19</Subscript>

The hexaferrite BaFe₁₂ O ₁₉ phase was synthesized through the mechanical alloying process followed by subsequent annealing. Rietveld refinements of as-milled powder annealed at 700 ^°C confirm the formation of the BaFe₁₂ O ₁₉ phase with the presence of an important amount of the α-Fe₂ O ₃ phase. Thus, prior mechanical milling shows much lower reaction temperature and less reaction time compared to conventional methods. Further annealing up to 900 and 1100 ^°C could not enable the formation of a single BaFe₁₂ O ₁₉ phase, reaching an optimum phase composition ratio close to BaFe₁₂ O ₁₉/ α-Fe₂ O ₃ 70/30. The crystallite size was found to be in the nanoscale level but increases with increasing temperature (BaFe₁₂ O ₁₉ = 20–62 nm; α-Fe₂ O ₃ = 31–74 nm). SEM micrographs show that as the annealing temperature rises, the particles become more regular with sharp edges and hexagonal-like shapes. Magnetic measurements reveal that both M _s and M _r increase with annealing temperature to reach maximum values at 900 ^°C then remain unchanged, associated with phase composition. The coercivity H _c increases upon annealing up to 700 ^°C to a much higher value, from 1.7 kOe for as-milled powder to 4.8 kOe. Its value then decreases, attributed to grain (particle) growth (formation of larger particles) due to high annealing temperatures: 900–1100 ^°C. The obtained composites show very interesting magnetic properties and can be considered for potential applications, such as hyperthermia, heavy metal and dye removal, and hard/soft magnetic composites.     

Influence of isovalent and heterovalent substitution for Bi<Superscript>3+</Superscript> and Fe<Superscript>3+</Superscript> on the properties of Bi<Subscript>2</Subscript>Fe<Subscript>4</Subscript>O<Subscript>9</Subscript>-based solid solutions

Bi_2–хLa_хFe₄O₉ and Bi₂Fe_4–2xTi_xCo_xO₉ ferrites have been prepared by solid-state reactions at a temperature of 1073 K. X-ray diffraction data indicate that, in the Bi_2–хLa_хFe₄O₉ system, the limiting degree of La³⁺ substitution for Bi³⁺ ions in Bi₂Fe₄O₉ does not exceed 0.05 and that the limiting degree of substitution in the Bi₂Fe_4–2xTi_xCo_xO₉ system lies in the range 0.05 < x < 0.1. The specific magnetization and specific magnetic susceptibility of the samples have been measured at temperatures from 5 to 300 K in a magnetic field of 0.86 T. The field dependences of magnetization obtained for the Bi_2–хLa_хFe₄O₉ and Bi₂Fe_4–2xTi_xCo_xO₉ ferrites at temperatures of 300 and 5 K demonstrate that partial isovalent substitution of La³⁺ for Bi³⁺ ions in Bi₂Fe₄O₉ and heterovalent substitution of Ti⁴⁺ and Co²⁺ ions for two Fe³⁺ ions leads to partial breakdown of the antiferromagnetic state and nucleation of a ferromagnetic state.     

Synthesis and luminescence properties of Tb<Superscript>3+</Superscript>-doped LiMgPO<Subscript>4</Subscript> phosphor

Polycrystalline sample LiMg_(1?x)PO₄:xTb³⁺ (x = 0.001, 0.002, 0.005, 0.01, 0.02) phosphor was synthesized via modified solid state method (MSSM). The prepared sample was characterized through XRD pattern (X-ray diffraction) and SEM (scanning electron microscope). Additionally, photoluminescence (PL), optically stimulated luminescence (OSL), thermoluminescence (TL) and other dosimetric properties including dose linearity, reusability and fading were studied. In OSL mode, sensitivity of prepared phosphor was found to be 2.7 times that of LiMgPO₄:Tb³⁺, B (BARC) phosphor and 4.3 times that of α-Al₂O₃:C (BARC) phosphor. The TL glow consists of overlapping peaks in temperature range of 50–400^°C and first peak (P₁) was observed at 150^°C, second peak (P₂) at 238^°C, third peak (P₃) at 291^°C and fourth peak (P₄) at 356^°C. The TL sensitivity of second peak (P₂) of LiMgPO₄:Tb³⁺ phosphor was compared with α-Al₂O₃:C (BARC) phosphor and found to be 100 times that of the α-Al₂O₃:C (BARC) phosphor. The minimum detectable dose (MDD) was found to be 5.6 μGy. Moreover, photoionization cross-sections, linearity, reusability, fading and kinetic parameters were calculated. Also, photoluminescence spectra of LiMgPO₄: Tb³⁺ shows characteristic green–yellow emission exciting at 224 nm UV source.     

The magnetic properties of BiY<Subscript>2</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> nanoparticles doped with Cr ions

BiY₂Cr _x Fe_5?x O₁₂ (x = 0, 0.05, 0.1, 0.2, 0.3) nanocrystals were synthesized by using a sol-gel method. Samples were characterized by the powder X-ray diffraction (XRD), the thermal gravity analysis (TGA) and the differential thermal analysis (DTA), the vibrating sample magnetometer(VSM) and Mössbauer spectrums. The average sizes of the particles were determined by the Scherrer’s formula. The special Ms and Mössbauer spectra of BiY₂Cr _x Fe_5?x O₁₂ nanocrystals are researched at room temperature. It is seen that the special Mss of samples are initially increased with increasing Cr³⁺ content (x < 0.1), and decreased with increasing content of Cr³⁺ ions (x > 0.1).     

Ferromagnetism in Fe-doped BaTiO<Subscript>3</Subscript> Ceramics

Polycrystalline samples of BaTi_1?xFe_xO₃ (x = 0.00–0.30) are prepared by solid-state reaction method and their structural and magnetic properties are studied. Detailed investigation of XRD patterns reveal the coexistence of tetragonal (space group P4mm) and hexagonal phases (space group P6 ₃/mmc) for x ≥ 0.1. Magnetic measurements reveal room-temperature ferromagnetism in x = 0.15–0.3 samples, and their ferromagnetic transition temperature increases from 397 K for x = 0.15 to 464 K for x = 0.3. The initial magnetization curves for x = 0.15–0.3 are analyzed in terms of bound magnetic polaron (BMP) model. The analysis of susceptibility data in the paramagnetic region by Curie-Weiss law confirms the ferromagnetic transition for x ≥ 0.15 and the effective magnetic moment systematically increases with increase in Fe concentration.     

New NaSrPO<Subscript>4</Subscript>:Sm<Superscript>3+</Superscript> phosphor as orange-red emitting material

Sm³⁺-activated NaSrPO₄ phosphors could be efficiently excited at 403 nm, and exhibited a bright red emission mainly including four wavelength peaks of 565, 600, 646 and 710 nm. The highest emission intensity was found for NaSr _1?x PO₄: xSm³⁺ with a composition of x = 0.007. Concentration quenching was observed as the composition of x exceeds 0.007. The decay time values of NaSr_1?x PO ₄ : xSm³⁺ phosphors range from around 2.55 to 3.49 ms. NaSr_1?x PO₄: xSm³⁺ phosphor shows a higher thermally stable luminescence and its thermal quenching temperature T ₅₀ was found to be 350°C, which is higher than that of commercial YAG:Ce³⁺ phosphor and ZnS:(Al, Ag) phosphor. Because NaSr_1?x PO₄: xSm³⁺ phosphor features a high colour-rendering index and chemical stability, it is potentially useful as a new scintillation material for white light-emitting diodes.     

Microstructural and Magnetic Features of SrFe<Subscript>12</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>19</Subscript> Materials Synthesized from Different Fuels by Sol-Gel Auto-Combustion Method

The nanocrystalline SrFe₁₂ O ₁₉ materials were prepared by a sol-gel auto-combustion method using different fuels such as citric acid, dextrose, aniline, and hexamine. The combustion product obtained from all the fuels except from that of aniline show a single phase of SrFe₁₂ O ₁₉ materials upon annealing at 1000 ^°C/2 h. The combustion product obtained from aniline as fuel shows SrFe₁₂ O ₁₉ as the main phase with α-Fe₂ O ₃ as impurity. No notable change in lattice parameters is observed due to variation in fuels for SrFe₁₂ O ₁₉ materials. With a little change in the NIR relative reflectance (72–85 %) on fuels, the different SrFe₁₂ O ₁₉ materials display high NIR reflectance in the wavelength range, 1500–2500 nm. The photoluminescence emission spectra of SrFe₁₂ O ₁₉ materials reveal a broad emission peak at ～350 nm which is reminiscent to the Ba-based hexaferrite, BaFe₁₂ O ₁₉. The FESEM images expose quite dissimilar morphology for the various fuels used in the synthesis of SrFe₁₂ O ₁₉ materials. Hysteresis loops for all the nanocrystalline SrFe₁₂ O ₁₉ materials observed under the applied field of ±1.5 T at room temperature exhibit hard ferromagnetic property. The SrFe₁₂ O ₁₉ materials produced from glycine and aniline as fuels exhibit highest and lowest M _s values of 61.3 and 50.5 emu/g, respectively.     

Magnetic properties of LaInO<Subscript>3</Subscript>-based perovskite-structure photoluminescent materials doped with Nd<Superscript>3+</Superscript>, Cr<Superscript>3+</Superscript>, and Mn<Superscript>3+</Superscript> ions

Single-phase ceramic samples of La_1–xNd_xInO₃ (0.007 ≤ x ≤ 0.05), LaIn_0.99M_0.01O₃, and La_0.95Nd_0.05In_0.995M_0.005O₃ (M = Cr³⁺ and Mn³⁺) solid solutions have been prepared by solid-state reactions, and their crystal structure, magnetic field dependences of their specific magnetization at 5 and 300 K, and temperature dependences of their molar magnetic susceptibility have been studied. It has been shown that the 300-K specific magnetization of the La_1–xNd_xInO₃ (x = 0.02, 0.05), La_0.95Nd_0.05In_0.995M_0.005O₃ (M = Cr³⁺ and Mn³⁺), and LaIn_0.99Mn_0.01O₃ solid solutions increases linearly with increasing magnetic field strength up to 14 T and that the magnitude of the 300-K specific magnetization of the La_0.993Nd_0.007InO₃ and LaIn_0.99Cr_0.01O₃ solid solutions increases linearly, but they have diamagnetic magnetization. At a temperature of 5 K, the magnetization of all the indates studied here increases nonlinearly with increasing magnetic field strength, gradually approaching magnetic saturation, without, however, reaching it in a magnetic field of 14 T. In the temperature range where the Curie–Weiss law is obeyed (5–30 K), the effective magnetic moments obtained for the Nd³⁺ ion (\({\mu _{effN{d^{3 + }}}}\)) in the La_1–xNd_xInO₃ solid solutions with x = 0.007, 0.02, and 0.05 are 2.95μ_B, 3.09μ_B, and 2.75μ_B, respectively, which is well below the theoretical value \({\mu _{effN{d^{3 + }}}}\)= 3.62μ_B. The effective magnetic moments of the Cr³⁺ and Mn³⁺ ions in the LaIn_0.99Cr_0.01O₃ and LaIn_0.99Mn_0.01O₃ solid solutions are 3.87μ^B and 5.11μ^B, respectively, and differ only slightly from the theoretical values \({\mu _{effC{r^{3 + }}}}\)= 3.87μ^B and \({\mu _{effM{n^{3 + }}}}\)= 4.9μ^B.     

Effect of Bi and Sr doping on morphological and magnetic properties of LaCo<Subscript>0.6</Subscript>Fe<Subscript>0.4</Subscript>O<Subscript>3</Subscript> nanosized perovskites

Nanopowders of La _1?x Bi _x Co_0.6Fe_0.4O₃ (x = 0, 0.1, 0.2) and La _1?2x Bi _x Sr _x Co_0.6Fe_0.4O₃ (x = 0.1) multinary perovskites were synthesized by citrate sol–gel autocombustion method. Crystalline phase and the lattice parameters were obtained from X-ray diffraction pattern. The XRD result shows that all compounds have rhombhohedral crystal structure with \(\bar {\mathbf {R}\mathbf {3}}\)c space group and Bi (x = 0.2) have the presence of secondary peaks. Crystallite size, dislocation density, specific area and strain were calculated from XRD. The elemental composition and micrographs of grain were obtained from EDAX (energy dispersive X-ray analysis) and SEM (scanning electron microscopy), with an average grain size below 400 nm. Surface morphological studies using XPS (X-ray photoelectron spectroscopy) were used to find out the chemical states and surface proportion of oxygen present in samples. Finally, using the vibrating sample magnetometer the room temperature magnetic behaviour of compounds was studied and it was observed that the ferromagnetic behaviour of LaCo_0.6Fe_0.4O₃ was reduced by Bi and Sr doping.     

Effects of Ge<Superscript>4+</Superscript> acceptor dopant on sintering and electrical properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (K_0.5Na_0.5)(Nb_1-xGe _x )O₃ (KNN-xGe, where x = 0-0.01) piezoelectric ceramics were prepared by conventional ceramic processing. The effects of Ge⁴⁺ cation doping on the phase compositions, microstructure and electrical properties of KNN ceramics were studied. SEM images show that Ge⁴⁺ cation doping improved the sintering and promoted the grain growth of the KNN ceramics. Dielectric and ferroelectric measurements proved that Ge⁴⁺ cations substituted Nb⁵⁺ ions as acceptors, and the Curie temperature (T_C) shows an almost linear decrease with increasing the Ge⁴⁺ content. Combining this result with microstructure observations and electrical measurements, it is concluded that the optimal sintering temperature for KNN-xGe ceramics was 1020°C. Ge⁴⁺ doping less than 0.4 mol.%can improve the compositional homogeneity and piezoelectric properties of KNN ceramics. The KNN-xGe ceramics with x = 0.2% exhibited the best piezoelectric properties: piezoelectric constant d₃₃ = 120 pC/N, planar electromechanical coupling coefficient k_p = 34.7%, mechanical quality factor Q_m = 130, and tanδ = 3.6%.     

Very high thermal stability with excellent dielectric,and non-ohmics properties of Mg-doped CaCu<Subscript>3</Subscript>Ti<Subscript>4.2</Subscript>O<Subscript>12</Subscript> ceramics

In this work, the nominal CaCu_3?xMg_xTi_4.2O₁₂ (0.00, 0.05 and 0.10) ceramics were prepared by sintering pellets of their precursor powders obtained by a polymer pyrolysis solution method at 1100 °C for different sintering time of 8 and 12 h. Very low loss tangent (tanδ)?<?0.009–0.014 and giant dielectric constant (ε′) ～?1.1?×?10⁴–1.8?×?10⁴ with excellent temperature coefficient (Δε′) less than ±?15% in a temperature range of ??60 to 210 °C were achieved. These excellent performances suggested a potent application of the ceramics for high temperature X8R and X9R capacitors. It was found that tanδ values decreased with increasing Mg²⁺ dopants due to the increase of grain boundary resistance (R_gb) caused by the very high density of grain, resulting from the substitution of small ionic radius Mg²⁺ dopants in the structure. In addition, CaCu_3?xMg_xTi_4.2O₁₂ ceramics displayed non-linear characteristics with the significant enhancements of a non-linear coefficient (α) and a breakdown field (E_b) due to Mg²⁺doping. The high values of ε′ (14012), α (13.64) and E_b (5977.02 V/cm) with very low tanδ value (0.009) were obtained in a CaCu_2.90Mg_0.10Ti_4.2O₁₂ ceramic sintered at 1100 °C for 8 h.     

Electrical and Dielectric Properties of Y<Superscript>3+</Superscript>-Substituted Barium Hexaferrites

In this study, Y³⁺ ion-substituted M-type barium hexaferrites (BaM; BaFe₁₂O₁₉) were fabricated via facile ceramic route. As-prepared powders were characterized by X-ray powder diffractometry (XRD), Fourier transform infrared (FT-IR) spectroscopy, and impedance spectroscopy. XRD (Rietveld) analyses confirmed the presence of a single characterization of all samples (except x = 0.0 and 0.1 samples). The crystallite sizes of products are found in the range of 47.2–63.2 nm. Spectral analysis (FT-IR) also presented the formation of spinel structure for all products. The ac conductivity of the substituted samples was found to initially decrease slightly with increase in Y³⁺ compared with unsubstituted, and then variation tendency changes at the medium substitution ranges are observed with a different attitude against temperature. In the end, the lower conductivity for high substitutions is recorded and increases as functions of frequency while it also increases with the elevation of temperature. It was observed that ac conductivities of products increased by increasing frequency which indicate that observed ac conductivity is due to both electronic and polaron hopping mechanism.     

Effect of Tb<Superscript>3+</Superscript> ion substitution on structural,optical and magnetic properties of CdS nanoparticles

Cd_1?xTb_xS (x?=?0.00, 0.05, 0.10, 0.15) nanoparticles were synthesized by hydrothermal technique. The effect of Tb-doping on structural, optical and magnetic properties were studied. The X-ray diffraction (XRD) confirmed wurtzite phase without any impurity. HR-TEM micrographs revealed the particle size of ~?18 nm with spherical morphology. Band gap calculated from UV–Visible absorption spectra showed an initial decrease from 2.49 eV (x?=?0) to 2.45 eV (x?=?0.10). Further, increasing Tb-doping to x?=?0.15 band gap increased to 2.54 eV. Photoluminescence emission spectra showed peaks at 430 and 490 nm for x?=?0 and 0.05 which corresponds to blue emission. Further increase in Tb doping, peaks found to be quenched. Peak at 530 nm is due to green emission and shifted to higher wavelength with Tb-doping. Magnetic analysis confirmed ferromagnetism in both undoped and Tb-doped nanoparticles. Saturation magnetization found to decrease upto x?=?0.10 and increased for x?=?0.15.     

Solid-state reactions in the system Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>

The formation mechanisms of Li _x Na_{1 ?x} Ta _y Nb_{1 ? y} O₃ perovskite solid solutions in the Li₂CO₃-Na₂CO₃-Nb₂O₅-Ta₂O₅ system have been studied by x-ray diffraction, differential thermal analysis, thermogravimetry, IR spectroscopy, and mass spectrometry at temperatures from 300 to 1100°C. The results indicate that the synthesis of Li _x Na_{1 ? x} Ta _y Nb_{1 ? y} O₃ solid solutions involves a complex sequence of consecutive and parallel solid-state reactions. An optimized synthesis procedure for Li _x Na_{1 ? x} Ta _y Nb_{1 ? y} O₃ solid solutions is proposed.     

Strong up-conversion luminescence and electrical properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> multifunctional ceramics by Er<Superscript>3+</Superscript> doping

Novel green-emitting piezoelectric ceramics of SrBi_4?x Er _x Ti₄O₁₅ (SBT-xEr) were prepared. Strong up-conversion with bright green (524 and 548 nm) and a relatively weak red (660 nm) emission bands were obtained under 980 nm excitation at room temperature, which is attributed to the intra 4f–4f electronic transition of (²H_11/2, ⁴S_3/2)–⁴I_15/2 and the transition from ⁴F_9/2 to ⁴I_15/2 of Er³⁺ ions, respectively. Simultaneously, Er³⁺ doping promotes the electrical properties. At 0.8 mol%Er, the optimal electric properties with high Curie temperature of T _c?~527?°C, large remanent polarization of 2P _r?~14.92 μC/cm² and piezoelectric constant of d ₃₃?~17 pC/N was achieved. As a multifunctional material, Er³⁺ doped SBT showed a great potential to be used in 3D-display, bio-imaging, solid state laser and optical temperature sensor.     

Al<Superscript>3+</Superscript> doped M-type hexagonal Ba–Co ferrites synthesized via ball-milling assisted ceramic process: magnetism and its correlation with structural properties

Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ (x?=?0, 0.08, 0.16, and 0.24) hexaferrites are synthesized via ball-milling assisted ceramic process, and their crystal structure, microstructure, and magnetic properties were studied. The results show that all samples, calcined between 950 and 1150 °C, consist of the main M-type hexagonal Ba ferrite phase in combination of a small amount of CoFe₂O₄ and Fe₂O₃ phase. The lattice parameters of M-type hexagonal Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ decrease after Al³⁺ doping. The addition of Al³⁺ ions results in a reduction of crystallite size, which is attributed that the presence of foreign phase CoFe₂O₄ and Fe₂O₃ restrains the growth of the Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ crystallite. Magnetic characterization indicates that all samples exhibit hard magnetic properties. Trend of specific saturation magnetization of Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ sample, calcined at 1050 and 1150 °C, decreases with the increase in Al³⁺ content. The varied magnetic properties with substitution content (x) are well explained by the occupancy effects of Al³⁺ ions in magnetoplumbite structure. Ba_0.5Co_0.5Fe₁₂O₁₉, calcined at 1150 °C, has the highest specific saturation magnetization value (56.07 emu/g), remanence (28.66 emu/g), and moment (10.76 µ_B). Besides, with the increase of substitution content (x), magnetic domain type of ferrites, calcined at 1150 °C, changes from a single magnetic domain to a multi-domain type.     

Coordination of V<Superscript>4+</Superscript> in Vanadium Titanium Oxide Xerogels

V_{2 ? y}Ti _y O_{5 ? δ} · nH₂O (0 < y < 1.33, layered structure) and Ti_{1 ? y}V _y O_{2 + δ} · nH₂O (0 < y < 0.25, anatase structure) solid solutions are synthesized by a sol-gel process. ESR spectra are used to assess the state of tetravalent vanadium in the solid solutions before and after calcination at 350°C and after intercalation with K⁺. Six types of ESR signals arising from paramagnetic ions in different environments are identified. Computer simulation is used to evaluate the ESR parameters of the materials studied.     

Structural studies of a new electroceramic composite: Pb(Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>)O<Subscript>3</Subscript> (PFN)-Cr<Subscript>0.75</Subscript>Fe<Subscript>1.25</Subscript>O<Subscript>3</Subscript>(CRFO)

A study of the structural characteristics of the composites [Pb(Fe_0.5Nb_0.5)O₃(PFN)] _x -[Cr_0.75Fe_1.25O₃(CRFO)]_100?x (x = 0 (CRFO100), 10, 50, 90, 100) was performed in this work. The compounds PFN100 and CRFO100 were prepared by conventional solid-state method and investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and ⁵⁷Fe Mössbauer Spectroscopy techniques. The X-ray analysis shows that PFN100 is tetragonal and the CRFO100 phase has a trigonal symmetry. The refinement of all the composites was also performed and discussed in this paper. The Mössbauer spectrum for the composite samples shows a paramagnetic doublet and a sextet probably assigned to a magnetic phase associated to Fe⁺³. For the sample PFN100, only a magnetic field of 49.5 T (isomer shift (δ) = 0.21 mm/s) was detected. For the composite sample, the δ and Δ are typical of Fe ions at sites of octahedral coordination.     

Perovskite M<Superscript>I</Superscript>M<Superscript>II</Superscript>O<Subscript>3</Subscript> as a matrix for incorporation of the actinide fraction of HLW

Perovskites of the compositions xLa₂O₃·Al₂O₃ and xLa₂O₃·Fe₂O₃ were prepared by cold pressing and sintering at temperatures of up to 1500°C, and their properties were studied. Perovskites based on lanthanum aluminate are more porous than those based on lanthanum ferrite, whereas the rate of radionuclide leaching from the former compounds is lower than from the latter compounds. The parameter x varied in a relatively wide range does not affect the leaching rate.