共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
广州国际体育演艺中心异形不规则曲面金属屋面,采用满粘法系统安装单层符合GB 12952 N类Ⅱ型标准的psylic PVC防水卷材,作一道柔性防水设防,同时也作为隔汽层;施工时采用了与卷材配套的胶粘剂,保证了工程质量。本文重点阐述了安装过程中的施工工艺流程、操作要点、工程质量验收方法,同时提出了结合现场条件及施工环境的一些注意事项。 相似文献
3.
东风汽车有限公司大连工厂总装车间轻钢屋面为双跨轻钢结构,设计采用TPO防水卷材单层屋面系统,Ⅱ级防水。文中指出所采用的TPO防水卷材不仅性能优越,且节能环保。但由于该卷材及工程项目自身的特点,因此对屋面主材和配套固定件的选材、细部节点的设计与施工都有较高要求。 相似文献
4.
5.
东风日产花都工厂乘用车产能扩建项目大跨度钢构屋面设计,采用了单层防水卷材屋面防水保温系统,选用的主材内增强型聚氯乙烯防水卷材防水、耐老化、抗撕裂,可机械固定施工。指出保证屋面系统及其细部节点的施工质量,才能避免对屋面的使用寿命和防水效果带来影响。 相似文献
6.
广州歌剧院外形设计独特、屋面异形部位复杂,对屋面系统特别是防水设计与施工提出了较高要求,采用卡莱尔EPDM单层卷材屋面系统较好地解决了屋面设计这一难题。本文介绍了EPDM单层卷材屋面系统的整体及细部设计与施工。 相似文献
7.
8.
建工行业产品标准《防水卷材屋面用机械固定件》是工程标准《单层防水卷材屋面工程技术规程》(JGJ/T 316)的配套标准,对防水卷材屋面机械固定法施工的工程质量起到重要作用。本文着重介绍了《防水卷材屋面用机械固定件》标准的立项、编制过程和标准主要内容。 相似文献
9.
10.
11.
介绍了单层防水卷材机械固定屋面系统的特点、应用范围、材料要求、设计与施工要点等.从现行屋面规范和节材的角度对发展该屋面系统提出了建议。 相似文献
12.
13.
屋面防水施工技术浅探 总被引:1,自引:0,他引:1
在建筑工程的施工过程中,屋面防水一直是一个施工重点和难点。只有不断提高屋面防水的施工技术,才能提升整个房屋建筑工程的施工质量。随着各种新工艺和新技术在屋面防水中的应用,未来的屋面防水工程必然会得到很大的改善。 相似文献
14.
15.
通过与国外屋面和防水行业发展水平的对比,分析了我国目前行业发展中存在的问题和与国外的差距,并着重就叠层沥青油毡屋面、改性沥青防水卷材、高分子防水卷材、现场喷涂聚氨酯泡沫等屋面和防水系统的发展方向提出了建议。 相似文献
16.
Numerous enclosure wall systems employ membranes that are not fully adhered, common examples being mechanically attached housewraps in screen-type exterior wall systems. Many roofing systems also incorporate membranes that are not fully adhered such as mechanically fastened single-ply membranes. Under a negative air pressure differential caused by wind suction, these wall and roof membranes can deform or balloon. Ballooning of the membrane affects many aspects of its performance. For instance, it changes the volume of the air chamber in screen-type wall systems and therefore, affects both the extent of screen pressure moderation and the nature of ventilation within the wall. In case of the single-ply roofing membrane, excessive ballooning can tear or rupture the membrane at the mechanical fastener location and therefore fail the membrane as the primary waterproofing component in the roofing system. This paper develops the structural mechanics for flexible membranes ballooning in three dimensions under a negative air pressure differential. The governing differential equation is derived and solved numerically. A second-order paraboloid of revolution is assumed to describe the ballooning shape. A series of physical tests were conducted to confirm that the ballooning shape follows the second-order paraboloid of revolution and compare the model predict with the test data. 相似文献
17.
介绍了屋面防水等级、防水基层、施工技术要求、材料等方面的基本要求,根据屋面的细部构造特点,探讨了屋面工程的防水设计方法,以解决住宅工程屋面防水的渗漏问题。 相似文献
18.
对现有屋面结构特点及渗漏原因进行了分析,并从选用防水材料、改进施工工艺等方面进行了论证,提出了提高金属屋面防水翻新施工的方法,同时对自粘卷材工艺进行了研究,解决了金属屋面翻新防水施工质量问题。 相似文献
19.
介绍了湖北省首个通过建设部3A住宅性能认定预审的住宅工程项目的防水方案和施工。该工程地下室、厨房与卫生间均采用聚合物水泥防水涂料:屋面采用倒置式防水技术。 相似文献