Effect of binder content on the cycle performance of nano-sized Fe2O3-loaded carbon for use as a lithium battery negative electrode

Nano-sized Fe₂O₃-loaded carbon material was prepared by loading Fe₂O₃ on carbon using various carbonaceous materials. Carbonaceous materials strongly affected the electrochemical behavior of nano-sized Fe₂O₃-loaded carbon. In addition, the binder content also significantly affected the cycle performance of nano-sized Fe₂O₃-loaded carbon. The content of binder depended on the type of carbon used. In the optimal condition for binder content, nano-carbons such as acetylene black (AB), tubular carbon nanofibers (CNF), and platelet CNF provided larger capacities than graphite, and tubular CNF showed the greatest capacity after long-term cycling.     

Effect of metal-sulfide additives on electrochemical properties of nano-sized Fe2O3-loaded carbon for Fe/air battery anodes

In the present study, K₂S and Bi₂S₃ were used as additives in electrolytes and electrodes, respectively. The effects of these additives on the electrochemical properties of nano-sized Fe₂O₃-loaded carbon electrodes were investigated using cyclic voltammetry (CV), galvanostatic cycling performance and scanning electron microscopy (SEM), along with electron dispersive spectroscopy (EDS). The results showed that both K₂S and Bi₂S₃ significantly reduced hydrogen evolution and benefited the Fe₂O₃-loaded carbon electrode, such as by retarding passivation and improving the discharge capacity. The effects of metal sulfide additives depended on the carbon used. For Bi₂S₃ additive, all carbons provided larger capacities than acetylene black (AB) while AB gave greater capacity than other carbons when K₂S was used.     

Synthesis of nano-Fe3O4-loaded tubular carbon nanofibers and their application as negative electrodes for Fe/air batteries

Nano-Fe₃O₄-loaded tubular carbon nanofibers (nano-Fe₃O₄/TCNFs) were synthesized by adding TCNFs into the high-temperature solution-phase reactions of iron(III) acetylacetonate with 1,2-hexadecanediol in the presence of oleic acid and oleylamine. The morphology and structure of this material were investigated by transmission electron microscopy (TEM) and X-ray diffraction (XRD) measurements. TEM observation clarified that nano-sized Fe₃O₄ particles with a uniform diameter of several nanometers were distributed and loaded tightly on the TCNF surfaces (inside and outside). After being annealed at 500 °C in Ar gas flow, nano-Fe₃O₄/TCNFs were used as the active material of negative electrodes for Fe/air batteries. Using an alkaline aqueous electrolyte with K₂S additive, a high specific capacity of 786 mAh g⁻¹ and cycling efficiency of 76% at the 30th cycle were obtained. The downsizing of the conductive Fe₃O₄ nano-particles was considered to have contributed to the good electrochemical properties of the material.     

Reduction characteristics of CuFe2O4 and Fe3O4 by methane; CuFe2O4 as an oxidant for two-step thermochemical methane reforming

The reduction characteristics of CuFe₂O₄ and Fe₃O₄ by methane at 600–900 °C were determined in a thermogravimetric analyzer for the purpose of using CuFe₂O₄ as an oxidant of two-step thermochemical methane reforming. It was found that the addition of Cu to Fe₃O₄ largely affected the reduction kinetics and carbon formation in methane reduction. In the case of CuFe₂O₄, the reduction kinetics was found to be faster than that of Fe₃O₄. Furthermore, carbon deposition and carbide formation from methane decomposition were effectively inhibited. In case of Fe₃O₄, Fe metal formed from Fe₃O₄ decomposed methane catalytically, that lead to the formation of graphite and Fe₃C phases. It is deduced that Cu in CuFe₂O₄ enhanced reduction kinetics, decreased reduction temperature and prevented carbide and graphite formation. Additionally, methane conversion and CO selectivity in the syngas production step with CuFe₂O₄ were in the range of 33.5–55.6% and 54.9–59.6%, respectively.     

Electrochemical properties of nano-sized Fe2O3-loaded carbon as a lithium battery anode

Nano-sized Fe₂O₃-loaded carbon material was prepared by loading Fe₂O₃ on carbon using a chemical method. Fe(NO₃)₃ was impregnated on carbon in an aqueous solution, and the mixture was dried and then calcined for 1 h at 400 °C in flowing Ar. Transmission electron microscopy (TEM) coupled with X-ray diffraction measurements revealed that small Fe₂O₃ particles (a few tenths of nanometers) were distributed on the carbon surface. The obtained nano-sized Fe₂O₃-loaded carbon material acted as an anode in a Li cell. High charge capacities of over 1000 mAh g⁻¹ (reduction of Fe₂O₃) in the first charge process suggested that Fe³⁺ in Fe₂O₃ was electrochemically reduced to Fe⁰. Investigation of the charge material by X-ray photoelectron spectroscopy (XPS) confirmed that Fe³⁺ is reduced to Fe⁰. Nano-sized Fe₂O₃-loaded acetylene black (AB), which, due to the larger surface area of AB, gave a greater distribution of nano-sized Fe₂O₃ particles than graphite, provided a larger capacity than nano-sized Fe₂O₃-loaded graphite.     

Improvement of hydrogen storage characteristics of Mg by planetary ball milling under H2 with metallic element(s) and/or Fe2O3

Among samples of Mg-Ni, Mg-Ni-5Fe₂O₃, and Mg-Ni-5Fe, Mg-Ni-5Fe had the highest hydriding and dehydriding rates. For the as-milled Mg-Ni-5Fe alloy and the hydrided Mg-Ni-5Fe alloy after activation, the weight percentages of the constituent phases were calculated using the FullProf program. The creation of defects and the diminution of Mg particle size through reactive mechanical grinding and hydriding-dehydriding cycling, and the formation of the Mg₂Ni phase are considered to increase the hydriding and dehydriding rates. Mg-14Ni-2Fe-2Ti-2Mo had higher hydriding and dehydriding rates than did any of the other samples (Mg-Ni, Mg-Ni-5Fe₂O₃, Mg-Ni-5Fe, and Mg-14Ni-6Fe₂O₃) prepared in this work.     

Photoelectrochemical study on charge transfer properties of nanostructured Fe2O3 modified by g-C3N4

Novel photocatalysts, which consist of two visible light responsive semiconductors including graphite-like carbon nitride (g-C₃N₄) and Fe₂O₃, were successfully synthesized via electrodeposition followed by chemical vapor deposition. The morphology of the g-C₃N₄/Fe₂O₃ can be tuned from regular nanosheets to porous cross-linked nanostructures. Remarkably, the optimum activity of the g-C₃N₄/Fe₂O₃ is almost 70 times higher than that of individual Fe₂O₃ for photoelectrochemical water splitting. The enhancement of photoelectrochemical activity could be assigned to the morphology change of the photocatalysts and the effective separation and transfer of photogenerated electrons and holes originated from the intimately contacted interfaces. The g-C₃N₄/Fe₂O₃ composites could be developed as high performance photocatalysts for water splitting and other optoelectric devices.     

Morphological, optical and photocatalytic properties of TiO2–Fe2O3 multilayers

Morphological, optical and photocatalytic properties of TiO₂, Fe₂O₃ and TiO₂–Fe₂O₃ samples (formed by 1, 3 and 5 coatings) were studied. The layers were deposited on glass substrate by the sol–gel method. The catalytic activity of the samples was studied by the photodecomposition of methylene blue (MB) under visible light illumination. The FTIR results indicate that all samples present surface OH radicals that are bound either to the Ti or Fe atoms. This effect is better visualized at larger number of coatings in the TiO₂–Fe₂O₃/glass systems. Also, two mechanisms are observed during the photodecomposition of the MB.     

Iron oxide (n-Fe2O3) nanowire films and carbon modified (CM)-n-Fe2O3 thin films for hydrogen production by photosplitting of water

Iron oxide n-Fe₂O₃ nanowire photoelectrodes were synthesized by thermal oxidation of Fe metal sheet (Alfa Co. 0.25 mm thick) in an electric oven then tested for their photoactivity. The photoresponse of the n-Fe₂O₃ nanowires was evaluated by measuring the rate of water splitting reaction to hydrogen and oxygen, which is proportional to photocurrent density, J_p. The optimized electric oven-made n-Fe₂O₃ nanowire photoelectrodes showed photocurrent densities of 1.46 mA cm⁻² at measured potential of 0.1 V/SCE at illumination intensity of 100 mW cm⁻² from a Solar simulator with a global AM 1.5 filter. For the optimized carbon modified (CM)-n-TiO₂ synthesized by thermal flame oxidation the photocurrent density for water splitting was found to increase by two fold to 3.0 mA cm⁻² measured at the same measured potential and the illumination intensity. The carbon modified (CM)-n-Fe₂O₃ electrode showed a shift of the open circuit potential by −100 mV/SCE compared to undoped n-Fe₂O₃ nanowires. A maximum photoconversion efficiency of 2.3% at applied potential of 0.5 V/E_aoc was found for CM-n-Fe₂O₃ compared to 1.69% for n-Fe₂O₃ nanowires at higher applied potential of 0.7 V/E_aoc. These CM-n- Fe₂O₃ and n- Fe₂O₃ nanowires thin films were characterized using photocurrent density measurements under monochromatic light illumination, UV-Vis spectra, X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Improved separation efficiency of photogenerated carriers for Fe2O3/SrTiO3 heterojunction semiconductor

To investigate the mechanisms of the improvement on separation efficiency of photogenerated carriers, a Fe₂O₃/SrTiO₃ heterojunction semiconductor with an improved separation efficiency was successfully prepared. The heterojunction semiconductor was characterized with X-ray diffraction (XRD), UV–vis absorption spectrum, scanning electron microscope (SEM) and surface photovoltage (SPV) spectroscopy. The energy band diagrams of Fe₂O₃ and SrTiO₃ were determined with X-ray photoelectron spectroscopy (XPS), based on which the conduction band offset (CBO) between Fe₂O₃ and SrTiO₃ was quantified to be 1.26 ± 0.03 eV. The recombination of photogenerated carriers was investigated with photoluminescence (PL) spectrum, which indicates that the formation of Fe₂O₃/SrTiO₃ decreases the recombination. Thus the improved separation efficiency is mainly due to the energy difference between the conduction band edges of Fe₂O₃ and SrTiO₃, and the decreased electron-hole recombination for Fe₂O₃/SrTiO₃.     

Effects of modifying Ni/Al2O3 catalyst with cobalt on the reforming of CH4 with CO2 and cracking of CH4 reactions

Alumina supported nickel (Ni/Al₂O₃), nickel–cobalt (Ni–Co/Al₂O₃) and cobalt (Co/Al₂O₃) catalysts containing 15% metal were synthesized, characterized and tested for the reforming of CH₄ with CO₂ and CH₄ cracking reactions. In the Ni–Co/Al₂O₃ catalysts Ni–Co alloys were detected and the surface metal sites decreased with decrease in Ni:Co ratio. Turnover frequencies of CH₄ were determined for both reactions. The initial turnover frequencies of reforming (TOF_DRM) for Ni–Co/Al₂O₃ were greater than that for Ni/Al₂O₃, which suggested a higher activity of alloy sites. The initial turnover frequencies for cracking (TOF_CRK) did not follow this trend. The highest average TOF_DRM, H₂:CO ratio and TOF_CRK were observed for a catalyst containing a Ni:Co ratio of 3:1. This catalyst also had the maximum carbon deposited during reforming and produced the maximum reactive carbon during cracking. It appeared that carbon was an intermediate product of reforming and the best catalyst was able to most effectively crack CH₄ and oxidize carbon to CO by CO₂.     

Influence of metal oxide on LiBH4/2LiNH2/MgH2 system for hydrogen storage properties

In this study, various nanoscale metal oxide catalysts, such as CeO₂, TiO₂, Fe₂O₃, Co₃O₄, and SiO₂, were added to the LiBH₄/2LiNH₂/MgH₂ system by using high-energy ball milling. Temperature programmed desorption and MS results showed that the Li–Mg–B–N–H/oxide mixtures were able to dehydrogenate at much lower temperatures. The order of the catalytic effect of the studied oxides was Fe₂O₃ > Co₃O₄ > CeO₂ > TiO₂ > SiO₂. The onset dehydrogenation temperature was below 70 °C for the samples doped with Fe₂O₃ and Co₃O₄ with 10 wt.%. More than 5.4 wt.% hydrogen was released at 140 °C. X-ray diffraction indicated that the addition of metal oxides inhibited the formation of Mg(NH₂)₂ during ball milling processes. It is thought that the changing of the ball milling products results from the interaction of oxide ions in metal oxide catalysts with hydrogen atoms in MgH₂. The catalytic effect depends on the activation capability of oxygen species in metal oxides on hydrogen atoms in hydrides.     

Study on photocurrent of bilayers photoanodes using different combination of WO3 and Fe2O3

Bilayer photoanodes were prepared onto glass substrates (FTO) in order to improve generated photocurrents using UV-vis light by water splitting process. A comparative study of photocatalytic was performed over the films surface using Fe₂O_3, WO₃ and mixture of bicomponents (Fe₂O₃:WO₃). Different types of films were prepared using Fe₂O_3, WO₃ and bicomponents (mixture) on FTO substrates. The films were grown by sol gel method with the PEG-300 as the structure-directing agent. The photo-generated of the samples were determined by measuring the currents and voltages under illumination of UV-vis light. The morphology, structure and related composition distribution of the films have been characterized by SEM, XRD and EDX respectively. Photocurrent measurements indicated surface roughness as the effective parameter in this study. The deposited surfaces by bicomponents or mixture are flat without any feature on the surface while the deposited surfaces by WO₃ appears rough surface as small round (egg-shaped particles) and cauliflower-like. The surface deposited by Fe₂O₃ show rough no as well as WO₃ surface. The deposited surfaces by WO₃ reveal the higher value of photocurrent measurement due to surface roughness. Indeed, the roughness can be effective in increasing contact surface area between film and electrolyte and diffuse reflection (light scattering effect). The solution (Fe₂O₃:WO₃) shows the low photocurrent value in compare to WO₃ and Fe₂O₃ hat it may be due to decomposition the compound at 450 ± 1 °C to iron-tungstate Fe₂(WO₄)₃.     

Experimental investigation of chemical-looping hydrogen generation using Al2O3 or TiO2-supported iron oxides in a batch fluidized bed

Chemical-looping hydrogen generation (CLHG) is a novel technology for hydrogen production with inherent separation of CO₂. Three oxygen carriers Fe₂O₃ using inert materials Al₂O₃ or TiO₂ as support were prepared by mechanical-mixing method, i.e., Fe90Al10 (90%Fe₂O₃ + 10%Al₂O₃), Fe60Al40 (60%Fe₂O₃ + 40%Al₂O₃) and Fe60Ti40 (60%Fe₂O₃ + 40%Al₂O₃). Reactivity of the three oxygen carriers was first determined under CO reduction, steam oxidation and air oxidation atmospheres at 900 °C in a thermogravimetric analyzer. Then experiments to simulate the CLHG process were carried out in a batch fluidized bed. In the fluidized bed, all of the three oxygen carriers showed good reactivity over the multi-cycle experiments at 900 °C, and Fe60Al40 had the highest hydrogen yield. The reactivity of the oxygen carrier supported on Al₂O₃ was higher than that on TiO₂, which interacted with iron oxide forming FeTiO₃. The reactivity of Fe60Al40 was better than that of Fe90Al10. No deterioration of the oxygen carrier occurred after the multiple cycles, but for Fe90Al10 some agglomeration was detected. At 600-900 °C, higher temperature favored deeper reduction of iron oxide and increased the hydrogen production, while carbon deposition in the reduction period was suppressed with the rise of temperature. In the reduction, the conversion of fuel gas was constrained by thermodynamics in a single-stage reactor, and a compact fuel reactor was proposed for a full conversion of gaseous fuels.     

Oxygen-releasing step of ZnFe2O4/(ZnO + Fe3O4)-system in air using concentrated solar energy for solar hydrogen production

The oxygen-releasing step of the ZnFe₂O₄/(ZnO + Fe₃O₄)-system for solar hydrogen production with two-step water splitting using concentrated solar energy was studied under the air-flow condition by irradiation with concentrated Xe lamp beams from a solar simulator. The spinel-type compound of ZnFe₂O₄ (Zn-ferrite) releases O₂ gas under the air-flow condition at 1800 K and then decomposes into Fe₃O₄ () and ZnO with a nearly 100% yield (ZnFe₂O₄ = ZnO + 2/3Fe₃O₄ + 1/6O₂). The ZnO was deposited as the thin layer on the surface of the reaction cell wall. A thermodynamic study showed that the ZnO was produced by the reaction between the O₂ gas in the air and the metal Zn vapor generated from ZnFe₂O₄. With the combined process of the present study on the O₂-releasing step and the previous one on the H₂ generation step (ZnO + 2/3Fe₃O₄ + 1/3H₂O = ZnFe₂O₄ + 1/3H₂) for the ZnFe₂O₄/(ZnO + Fe₃O₄)-system, solar H₂ production was demonstrated by one cycle of the ZnFe₂O₄/(ZnO + Fe₃O₄)-system, where the O₂-releasing step had been carried out in air at 1800 K and the H₂ generation step at 1100 K.     

Preparation and photoelectrochemical properties of functional carbon nanotubes and Ti co-doped Fe2O3 thin films

Functional carbon nanotubes (CNTs) were incorporated into Ti-doped Fe₂O₃ thin films by a facile, one-step co-electrodeposition method. The films were characterized by X-ray diffraction, scanning electron microscopy, UV–visible absorption, and X-ray photoelectron spectroscopy. The introduction of CNTs results in a better absorption in visible region and greatly enhances the photoelectrochemical properties of the Ti–Fe₂O₃ films. The improved photoelectrochemical properties of the CNTs and Ti co-doped Fe₂O₃ films are due to the charge equilibration which interplays between the Ti–Fe₂O₃ and CNTs. The effect of CNTs to mediate fast charge transfer and to retard charge recombination rate in the composites is also demonstrated by kinetics analysis and electrochemical impedance spectroscopy. The influence of different groups-modified CNTs and different content of CNTs was also studied. The highest photocurrent is 4.5 mA/cm² at 1.23 V (vs. RHE) obtained by incorporating 0.10 mg/mL amino-group modified CNTs in the Ti–Fe₂O₃ film. The amino-functionalized CNTs doped film exhibits the highest photoelectric response compared with those doped by the pristine and acid-treated CNTs under the same conditions, which can be ascribed to the better hydrophilicity and dispersibility of the amino-functionalized CNTs.     

Photocatalytic hydrogen production using Fe2O3-based core shell nano particles with ZnS and CdS

Stability and efficiency of photocatalysts are important to realize the practical applications of them for photocatalytic hydrogen production from industrial sulfide effluent. Novel, magnetically separable core–shell nano photocatalysts viz., CdS/Fe₂O₃, ZnS/Fe₂O₃ and (CdS + ZnS)/Fe₂O₃ were prepared and their hydrogen evolution activity under visible light was examined. The XRD result shows that CdS and ZnS were very well coated on the surface of the iron oxide core shell particles. The HR-TEM result also confirms the core shell formation. (CdS + ZnS)/Fe₂O₃ evolved higher volume of hydrogen than the other catalysts. It is ascribed to rapid migration of excited electrons from (CdS + ZnS) toward Fe₂O₃ suppressing electron hole annihilation compared to other catalysts. The catalysts can be easily recovered from the reaction medium using external magnetic bar and so the photocatalyst can be reused without any mass loss. Hence, it can be a potential catalyst for recovery of hydrogen from industrial sulfide containing waste streams.     

Electrochemical properties of LiFe0.9Mn0.1PO4/Fe2P cathode material by mechanical alloying

LiFePO₄, olivine-type LiFe_0.9Mn_0.1PO₄/Fe₂P composite was synthesized by mechanical alloying of carbon (acetylene back), M₂O₃ (M = Fe, Mn) and LiOH·H₂O for 2 h followed by a short-time firing at 900 °C for only 30 min. By varying the carbon excess different amounts of Fe₂P second phase was achieved. The short firing time prevented grain growth, improving the high-rate charge/discharge capacity. The electrochemical performance was tested at various C/x-rate. The discharge capacity at 1C rate was increased up to 120 mAh g⁻¹ for the LiFe_0.9Mn_0.1PO₄/Fe₂P composite, while that of the unsubstituted LiFePO₄/Fe₂P and LiFePO₄ showed only 110 and 60 mAh g⁻¹, respectively. Electronic conductivity and ionic diffusion constant were measured. The LiFe_0.9Mn_0.1PO₄/Fe₂P composite showed higher conductivity and the highest diffusion coefficient (3.90 × 10⁻¹⁴ cm² s⁻¹). Thus the improvement of the electrochemical performance can be attributed to (1) higher electronic conductivity by the formation of conductive Fe₂P together with (2) an increase of Li⁺ ion mobility obtained by the substitution of Mn²⁺ for Fe²⁺.     

Catalytic conversion of CH4 and CO2 to synthesis gas on Ni/SiO2 catalysts containing Gd2O3 promoter

A series of Ni/SiO₂ catalysts containing different amounts of Gd₂O₃ promoter was prepared, characterized by H₂-adsorption and XRD, and used for carbon dioxide reforming of methane (CRM) and methane autothermal reforming with CO₂ + O₂ (MATR) in a fluidized-bed reactor. The results of pulse surface reactions showed that Ni/SiO₂ catalysts containing Gd₂O₃ promoter could increase the activity for CH₄ decomposition, and Raman analysis confirmed that reactive carbon species mainly formed on the Ni/SiO₂ catalysts containing Gd₂O₃ promoter. In this work, it was found that methane activation and reforming reactions proceeded according to different mechanisms after Gd₂O₃ addition due to the formation of carbonate species. In addition, Ni/SiO₂ catalysts containing Gd₂O₃ promoter demonstrated higher activity and stability in both CRM and MATR reactions in a fluidized bed reactor than Ni/SiO₂ catalysts without Gd₂O₃ even at a higher space velocity.     

Performance degradation of impregnated La0.6Sr0.4Co0.2Fe0.8O3+Y2O3 stabilized ZrO2 composite cathodes of intermediate temperature solid oxide fuel cells

Composite cathodes of La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF) and Y₂O₃ stabilized ZrO₂ (YSZ) are fabricated by impregnating the porous YSZ scaffold pre-formed on YSZ electrolyte substrate with a solution containing La, Sr, Co and Fe in desired composition. The performance stability of the cathodes is evaluated in air at 750 °C for up to 120 h by electrochemical impedance spectroscopy under the condition of open circuit. An insignificant small amount of resistive phase SrZrO₃ is formed at 800 °C during cathode preparation; however, its volume is not further increased at 750 °C for 120 h, as indicated by the XRD results. The cathode polarization resistance (R_p) increases from 0.17 to 0.30 Ωcm² after the 120 h test mainly due to the increase of the low frequency polarization resistance (R_p2), which characterizes the low frequency processes in the reaction of oxygen reduction. The morphology change of the well connected LSCF particles to dispersive and flattened configuration accounts for the increase of the R_p2 and in turn the degradation of cathode performance.