Deep blue light-emitting diode based on high molecular weight poly(9,9-dioctylfluorene) with high efficiency and color stability

A highly efficient deep blue polymer light-emitting diode based on poly(9,9-dioctylfluorene) is demonstrated. The performance is found to increase significantly with the molecular weight. Two different molecular weights are compared, one is 71,000 and the other is 365,000. The electroluminescent efficiency and color stability are improved by slightly doping hole traps into the emission layer and bilayer structure. The maximum efficiency is 3.8 cd/A with the corresponding external quantum efficiency of 3.7% at deep blue with Commission Internationale de L’Eclairage (CIE) coordinate at (0.15, 0.09). Stable blue emission is maintained up to 6600 cd/m² without growth of green shoulder in emission spectrum.     

Efficient solution-processed electrophosphorescent devices using ionic iridium complexes as the dopants

Efficient solution-processed electrophosphorescent devices using two blue-emitting ionic iridium complexes (complex 1 and complex 2) were fabricated, with poly(N-vinylcarbazole) (PVK):1,3-bis(5-(4-tert-butylphenyl)-1,3,4-oxadiazol-2-yl)benzene (OXD-7) as the host and Cs₂CO₃/Al as the cathode. Using complex 1 as the dopant, we obtained efficient blue-green electrophosphorescence from single-layer devices with a maximum efficiency of 12.2 cd A^?1, a maximum brightness of 12,600 cd m^?2 and CIE (Commission Internationale de l’Éclairage) coordinates of (0.19, 0.45). And the maximum efficiency of the device based on complex 1 can be further improved to 20.2 cd A^?1, when a thin 1,3,5-tris(1-phenyl-1H-benzo[d]imidazol-2-yl)benzene (TPBI) layer was inserted between the light-emitting layer and the cathode. Using complex 2 as the dopant, we obtained deep-blue electrophosphorescence with the emission peak at 458 nm and CIE coordinates of (0.16, 0.22). Our work suggests that ionic iridium complexes are promising phosphors for obtaining efficient electrophosphorescence in the blue region.     

Efficient solution-processed green and white phosphorescence organic light-emitting diodes based on bipolar host materials

Four carbazole-based bipolar host materials are utilized for solution-processed phosphorescent organic light-emitting diodes (PhOLEDs). These bipolar materials consist of an electron-donor unit (carbazole) linking to a fluorene unit bearing various electron-acceptor units (oxadiazole, cyano, and benzimidazole) via a saturated carbon, giving sufficiently high triplet energies due to the lack of direct electronic coupling between the donor and acceptor(s). The resulting physical properties and bipolar characteristics render the realization of efficient solution-processed green and white OLEDs feasible. The best green light-emitting device based on bipolar host CzFCBI incorporating a stepwise hole-injection/transporting system exhibit a low drive voltage, a maximum external quantum efficiency of 14.0%, a current efficiency of 49.0 cd/A, and a power efficacy of 55.0 lm/W. Moreover, the CzFOXa-based two-component (blue–orange) white light-emitting device shows a warmish-white emission with a maximum external quantum efficiency of 6.9% and stable chromaticity coordinates at different luminance levels and yield a high color rendering index (CRI) reaching 76 at a luminance of 1000 cd/m².     

Synthesis and photophysical characterization of an ionic fluorene derivative for blue light-emitting electrochemical cells

A highly fluorescent an ionic fluorene derivative 1 was synthesized and its photophysical, electrochemical and electroluminescence characteristics were investigated. Deep blue emissions were observed for compound 1 in solid as well as in dilute solutions. The synthesized compound shows high fluorescence quantum yield around 77% indicates that compound 1 can perform its role as efficient ionic emitter in LEC devices. Light-emitting electrochemical cell (LEC) devices were fabricated incorporating compound 1 without (device I) and with (device II) ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM·PF₆). Devices I and II exhibited blue electroluminescence maximum centered at 455 and 454 nm with CIE coordinates of (0.15, 0.21) and (0.16, 0.22), respectively. Maximum luminance and current efficiency of 1105 cd m⁻² and 0.14 cd A⁻¹ respectively, has achieved for device I while that of device II resulted in 1247 cd m⁻² and 0.14 cd A⁻¹ respectively.     

A hybrid white organic light-emitting diode with stable color and reduced efficiency roll-off by using a bipolar charge carrier switch

A hybrid white organic light-emitting diode (WOLED) with an emission layer (EML) structure composed of red phosphorescent EML/green phosphorescent EML/spacer/blue fluorescent EML was demonstrated. This hybrid WOLED shows high efficiency, stable spectral emission and low efficiency roll-off at high luminance. We have attributed the significant improvement to the wide distribution of excitons and the effective control of charge carriers in EMLs by using mixed 4,4′,4″-tri(9-carbazoyl) triphenylamine (TCTA) and bis[2-(2-hydroxyphenyl)-pyridine] beryllium (Bepp₂) as the host of phosphorescent EMLs as well as the spacer. The bipolar mixed TCTA:Bepp_2, which was proved to be a charge carrier switch by regulating the distribution of charge carriers and then the exciton recombination zone, plays an important role in improving the efficiency, stabilizing the spectrum and reducing the efficiency roll-off at high luminous. The hybrid WOLED exhibits a current efficiency of 30.2 cd/A, a power efficiency of 32.0 lm/W and an external quantum efficiency of 13.4% at a luminance of 100 cd/m², and keeps a current efficiency of 30.8 cd/A, a power efficiency of 27.1 lm/W and an external quantum efficiency of 13.7% at a 1000 cd/m². The Commission Internationale de l’Eclairage (CIE) coordinates of (0.43, 0.43) and the color rendering index (CRI) of 89 remain nearly unchanged in the whole range of luminance.     

Solution-processed cathode-interlayer-free deep blue organic light-emitting diodes

Efficient non-doped deep blue organic light-emitting diodes (OLEDs) were fabricated by solution-processing method by using a series of small molecules consisting of various contents of triphenylamine and phosphonate-featured fluorene units as the emitting layer. Without any electron-injection layer, one of the optimal devices with a simple double-layer device configuration exhibits a maximal current efficiency of 2.59 cd A⁻¹ at 6.8 V (1.72 mA cm⁻²) with a CIE coordinates of (0.163, 0.097). These double-layer devices are demonstrated with excellent color-stability under a wide range of operating current density. The current work indicates that electron-rich triphenylamine moiety incorporated with phosphonate-featured fluorene units could be utilized as building blocks to construct a multi-functional platform combining good electron-injection property, carrier-transport property, and efficient electroluminescence. It also provides an approach to achieve a structure-simplified color-stable efficient blue OLED.     

Green and blue–green light-emitting electrochemical cells based on cationic iridium complexes with 2-(4-ethyl-2-pyridyl)-1H-imidazole ancillary ligand

The ionic iridium complexes, [Ir(ppy)₂(EP-Imid)]PF₆ (Complex 1) and [Ir(dfppy)₂(EP-Imid)]PF₆ (Complex 2) are used as the light-emitting material for the fabrication of light-emitting electrochemical cells (LECs). These complexes have been synthesized, employing 2-(4-ethyl-2-pyridyl)-1H-imidazole (EP-Imid) as the ancillary ligand, 2-phenylpyridine (ppy) and 2-(2,4-difluorophenyl)pyridine (dfppy) as the cyclometalated ligands, which were characterized by various spectroscopic, photophysical and electrochemical methods. The photoluminescence (PL) emission spectra in acetonitrile solution show blue–green and blue light emission for Complexes 1 and 2 respectively. However, LECs incorporating these complexes resulted in green (522 nm) light emission for Complex 1 with the Commission Internationale de L’Eclairage (CIE) coordinates of (0.33, 0.56) and blue–green (500 nm) light emission for Complex 2 with the CIE coordinates of (0.24, 0.44). Using Complex 1, a maximum luminance of 1191 cd m⁻² and current efficiency of 1.0 cd A⁻¹ are obtained while that of Complex 2 are 741 cd m⁻² and 0.88 cd A⁻¹ respectively.     

High efficiency and non-color-changing orange organic light emitting diodes with red and green emitting layers

We report a high performance orange organic light-emitting diode (OLED) where red and green phosphorescent dyes are doped in an exciplex forming co-host as separate red and green emitting layers (EMLs). The OLED shows a maximum external quantum efficiency (EQE) of 22.8%, a low roll-off of efficiency with an EQE of 19.6% at 10,000 cd/m², and good orange color with a CIE coordinate of (0.442, 0.529) and no color change from 1000 to 10,000 cd/m². The exciplex forming co-host system distributes the recombination zone all over the EMLs and reduces the triplet exciton quenching processes.     

Bright and efficient white stacked organic light-emitting diodes

High brightness and efficient white stacked organic light-emitting diodes have been fabricated by connecting individual blue and red emissive units with the anode–cathode layer (ACL) consisting of LiF (1 nm)/Ca (25 nm)/Ag (15 nm). Use 1,3-bis(carbazol-9-yl)benzene (mCP):bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (FirPic) as the blue emitter and tris(8-hydroxy-quinolinato)aluminium (Alq₃):4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidin-4-yl-vinyl)-4H-pyran (DCJTB) as the red emitter, white light emission with CIE coordinates of (0.32, 0.38) was obtained at a driving voltage of 26 V with a luminance of 40,000 cd/m². By replacing the red fluorescent emitter with a phosphorescent one, the color coordinates were improved to (0.33, 0.31). The peak external quantum efficiency was enhanced from 5.3% (at 28.2 mA/cm²) to 10.5% (at 1.4 mA/cm²) as well.     

Efficient simplified orange and white phosphorescent organic light-emitting devices with reduced efficiency roll-off

Efficient orange phosphorescent organic light-emitting devices based on simplified structure with maximum efficiencies of 46.5 lm/W and 51.5 cd/A were reported. One device had extremely low efficiency roll-off with efficiencies of 50.6 cd/A, 45.0 cd/A and 39.2 cd/A at 1000 cd/m², 5000 cd/m² and 10,000 cd/m² respectively. The reduced efficiency roll-off was attributed to more balanced carrier injection and broader recombination zone. The designed simplified white device showed much lower efficiency roll-off than the control one based on multiple emitting layers. The efficiency of simplified white device was 40.8 cd/A at 1000 cd/m² with Commission Internationale de I’Eclairage coordinates of (0.39, 0.46).     

Fluorene-based cathode interlayer polymers for high performance solution processed organic optoelectronic devices

A hydrophilic polyfluorene-based conjugated polyelectrolyte (CPE) Poly[9,9-bis(4′-(6″-(diethanolamino)hexyloxy) phenyl)fluorene], PPFN-OH (Scheme 1) has been synthesized and utilized as cathode interlayer for both polymer light emitting diodes (PLEDs) and solar cells (PSCs). For comparison, another CPE namely Poly[9,9-bis(6′-(diethanolamino)hexyl)fluorene] (PFN-OH) has also been investigated. They comprise the same polyfluorene backbone structures with, respectively, diethanolaminohexyl (PFN-OH) and diethanolaminohexoxyphenyl (PPFN-OH) substituents attached to the C9 carbon of the fluorene repeat unit. In comparison to reference devices with more reactive Ca/Al cathodes, utilizing these CPEs as interlayers allowed an Al cathode to be used for blue light emission PLEDs, yielding 51% and 92% enhancement of maximum luminous efficiency (LE) for PFN-OH and PPFN-OH, respectively. The PLEDs with PPFN-OH showed both higher maximum LE and maximum luminance (L) (LE = 2.53 cd/A at 6.2 V, L = 9917 cd/m² at 8.3 V) than devices with PFN-OH (2.00 cd/A at 4.1 V, 3237 cd/m² at 7.2 V). The PPFN-OH PLEDs also showed no significant roll-off in efficiency with increasing current density up to 400 mA/cm², indicating excellent electron injection ability and stability for this interlayer. The insertion of alkoxy-phenyl groups at the C9-position in PPFN-OH is clearly advantageous. This simple modification significantly improves the CPE cathode interlayer performance. Parallel investigations of the electron extraction properties of PPFN-OH in inverted architecture PSCs with PCDTBT:PC₇₀BM bulk heterojunction active layers demonstrated a power conversion efficiency enhancement of ∼19% (from 4.99% to 5.95%) for indium tin oxide cathode devices compared with reference devices using Ca/Al cathodes. These results confirm PPFN-OH to be a promising interlayer material for high performance solution processed organic optoelectronic devices.     

Efficient blue organic light-emitting diodes based on triphenylimidazole substituted anthracene derivatives

A series of new blue emissive materials based on the conjugates of highly fluorescent diaryl anthracene and electron-transporting triphenylimidazole moieties: 2-(4-(anthracen-9-yl)phenyl)-1,4,5-triphenyl-1H-imidazole (ACBI), 2-(4-(10-(naphthalen-1-yl)anthracen-9-yl)phenyl)-1,4,5-triphenyl-1H-imidazole (1-NaCBI), 2-(4-(10-(naphthalen-2-yl)anthracen-9-yl)phenyl)-1,4,5-triphenyl-1H-imidazole (2-NaCBI) were designed and synthesized successfully. These materials exhibit good film-forming properties and excellent thermal stabilities. Meanwhile, the decreased π-conjugation in these compounds compared with phenanthroimidazole derivatives leads to obvious hypsochromic shift. To explore the electroluminescence properties of these materials, typical three-layer organic light-emitting devices were fabricated. With respect to the three layer device 2 using 1-NaCBI as the emitting layer, its maximum current efficiency reaches 3.06 cd A⁻¹ with Commission Internationale del’Eclairage (CIE) coordinates of (0.149, 0.092). More interestingly, sky blue doped device 5 based on 1-NaCBI achieved a maximum current efficiency of 15.53 cd A⁻¹ and a maximum external quantum efficiency of 8.15%, high EQE has been proved to be induced by the up-conversion of a triplet excited state.     

Using d-limonene as the non-aromatic and non-chlorinated solvent for the fabrications of high performance polymer light-emitting diodes and field-effect transistors

Aiming to environment protection, green solvents are crucial for commercialization of solution-processed optoelectronic devices. In this work, d-limonene, a natural product, was introduced as the non-aromatic and non-chlorinated solvent for processing of polymer light-emitting diodes (PLEDs) and organic field effect transistors (OFETs). It was found that d-limonene could be a good solvent for a blue-emitting polyfluorene-based random copolymer for PLEDs and an alternating copolymer FBT-Th₄(1,4) with high hole mobility (μ_h) for OFETs. In comparisons to routine solvent-casted films of the two conjugated polymers, the resulting d-limonene-deposited films could show comparable film qualities, based on UV–vis absorption spectra and observations by atomic force microscopy (AFM). With d-limonene as the processing solvent, efficient blue PLEDs with CIE coordinates of (0.16, 0.16), maximum external quantum efficiency of 3.57%, and luminous efficiency of 3.66 cd/A, and OFETs with outstanding μ_h of 1.06 cm² (V s)⁻¹ were demonstrated. Our results suggest that d-limonene would be a promising non-aromatic and non-chlorinated solvent for solution processing of conjugated polymers and molecules for optoelectronic device applications.     

High-efficiency and multi-function blue fluorescent material for organic electroluminescent devices

We demonstrate one high-efficiency blue fluorescent material, N-(4-((E)-2-(6-((E)-4-(diphenylamino)styryl)naphthalen-2-yl)vinyl)phenyl)-N-phenylbenzenamine, with an emissive peak of 472 nm and the hole-transporting property speculated from different devices. It can function either as the single emissive layer or as the dye doped in N,N′-dicarbazolyl-4-4′-biphenyl (CBP). The former shows a maximum current efficiency and luminance of 7.06 cd/A (0.04 mA/cm²) and 16 930 cd/m², in contrast to 11.5 cd/A (4.35 mA/cm²) and 25 690 cd/m² for the latter. The better performance of the latter can be attributed to the bipolar carrier transport property of CBP and the hole-blocking and electron-transporting characteristic of 4,7-diphenyl-1,10-phenanthroline (BPhen), which resulting in a good balance of holes and electrons. Moreover, the Commission Internationale De L’Eclairage coordinates of the latter change slightly from (0.162, 0.3) to (0.148, 0.268) upon increasing the voltage from 3 V to 14 V.     

High efficiency fluorescent white organic light-emitting diodes with red,green and blue separately monochromatic emission layers

Highly efficient fluorescent white organic light-emitting diodes (WOLEDs) have been fabricated by using three red, green and blue, separately monochromatic emission layers. The red and blue emissive layers are based on 4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidin-4-yl-vinyl)-4H-pyran (DCJTB) doped N,N′-di(naphthalene-1-yl)-N,N′-diphenyl-benzidine (NPB) and p-bis(p-N,N-diphenyl-amino-styryl) benzene (DSA-ph) doped 2-methyl-9,10-di(2-naphthyl) anthracene (MADN), respectively; and the green emissive layer is based on tris(8-hydroxyquionline)aluminum(Alq₃) doped with 10-(2-benzothiazolyl)-2,3,6,7-tetrahydro-1,1,7,7-tetramethyl-1H,5H,1[H-(1)-benzopyropyrano(6,7-8-i,j)quinolizin-1]-one (C545T), which is sandwiched between the red and the blue emissive layers. It can be seen that the devices show stable white emission with Commission International de L’Eclairage coordinates of (0.41, 0.41) and color rendering index (CRI) of 84 in a wide range of bias voltages. The maximum power efficiency, current efficiency and quantum efficiency reach 15.9 lm/W, 20.8 cd/A and 8.4%, respectively. The power efficiency at brightness of 500 cd/m² still arrives at 7.9 lm/W, and the half-lifetime under the initial luminance of 500 cd/m² is over 3500 h.     

All-small-molecule efficient white organic light-emitting diodes by multi-layer blade coating

Blue and white small-molecule organic light-emitting diodes are fabricated by multi-layer blade coating on hot plate at 80 °C with hot wind. Uniform multi-layer structures are made without dissolution due to rapid drying. Only small molecules originally developed for vacuum deposition are used. For hole transport layer of, 4′,4″-tris(carbazol-9-yl)triphenylamine (TCTA), electron transport layer of 2,2′,2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TBPI), emissive layer host of, 6-bis(3-(9H-carbazol-9-yl)phenyl)pyridine (26DCzPPy), triplet emitters of bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium(III) (FIrpic), and cathode of LiF/Al, the peak current efficiency for blue emission is 25.1 cd/A (10.8% and 9.3 lm/W). Orange emitter iridium(III)bis (4-(4-t-butylphenyl) thieno[3,2-c]pyridinato-N,C2′)acetylacetonate (PO-01-TB) is added to obtain white emission with CIE coordinate of (0.39, 0.46) [1]. The current efficiency is 34.2 cd/A (11.6% and 12 lm/W) at maximum, 32.4 cd/A at 1000 cd/m², and 31 cd/A at 10,000 cd/m².     

High-efficiency low color temperature organic light emitting diodes with solution-processed emissive layer

Low color temperature (CT) lighting provides a warm and comfortable atmosphere and shows mild effect on melatonin suppression. A high-efficiency low CT organic light emitting diode can be easily fabricated by spin coating a single white emission layer. The resultant white device shows an external quantum efficiency (EQE) of 22.8% (34.9 lm/W) with CT 2860 K at 100 cd/m², while is shown 18.8% (24.5 lm/W) at 1000 cd/m². The high efficiency may be attributed to the use of electroluminescence efficient materials and the ambipolar-transport host. Besides, proper device architecture design enables excitons to form on the host and allows effective energy transfer from host to guest or from high triplet guest to low counterparts. By decreasing the doping concentration of blue dye in the white emission layer, the device exhibited an orange emission with a CT of 2280 K. An EQE improvement was observed for the device, whose EQE was 27.4% (38.8 lm/W) at 100 cd/m² and 20.4% (24.6 lm/W) at 1000 cd/m².     

Highly efficient single-layer organic light-emitting devices using cationic iridium complex as host

Highly efficient single-layer organic light-emitting devices (OLEDs) based on blended cationic Ir complexes as emitting layer have been demonstrated using narrow band gap cationic Ir complex [Ir(Meppy)₂(pybm)](PF₆) (C1) as guest and wide band gap cationic Ir complex [Ir(dfppy)₂(tzpy-cn)](PF₆) (C2) as host. As compared with single cationic Ir complex emitting layer, these host–guest systems exhibit highly enhanced efficiencies, with maximum luminous efficiency of 25.7 cd/A, external quantum efficiency of 8.6%, which are nearly 3-folds of those of pure C1-based device. Compared with a multilayer host-free device containing C1 as emitting layer and TPBI as electron-transporting and hole-blocking layer, the above single-layer devices also show 2-folds enhancement efficiencies. The high efficiencies achieved in these host–guest systems are among the highest values reported for ionic Ir complexes-based solid-state light-emitting devices. In addition, a white-similar emission with CIE of (0.36, 0.47) has also been achieved with luminous efficiency of 4.2 cd/A as the C1 concentration is 0.1 wt.%. The results demonstrate that the ionic Ir complexes-based host–guest system provides a new approach to achieve highly efficient OLEDs upon single-layer device structure and solution-processing technique.     

High-efficiency fluorescent white organic light-emitting device with double emissive layers

The authors demonstrate a fluorescent white organic light-emitting device (WOLED) with double emissive layers. The yellow and blue dyes, 5,6,11,12-tetraphenylnaphthacene and N-(4-((E)-2-(6-((E)-4-(diphenylamino)styryl)naphthalen-2-yl)vinyl)phenyl)-N-phenylbenzenamine, are doping into the same conductive host material, N,N′-dicarbazolyl-4-4′-biphenyl). The maximum luminance and power efficiency of the WOLED are 14.6 cd/A and 9.5 lm/W at 0.01 mA/cm², with the maximum brightness of 20 100 cd/m² at 17.8 V. The Commission International de L’Éclairage coordinates change slightly from (0.27, 0.37) to (0.28, 0.36), as the applied voltage increases from 6 V to 16 V. The high efficiencies can be attributed to the balance between holes and electrons.     

Highly efficient green top-emitting organic light-emitting devices with metal electrode structure

In this work, the electrical and optical characteristics of top-emitting organic light-emitting device (TEOLED) using metal Ag as anode with different thicknesses have been investigated. The emission peak of fabricated TEOLED is 512 nm for a full-width at half-maximum (FWHM) of 48 nm in forward direction. The TEOLED turns on at 3 V with luminance of 2.38 cd/m² and reaches 16,300 cd/m² at 9 V. The maximum of current efficiency is 5.2 cd/A at 7 V, corresponding to the external quantum efficiency of 1.72%.