Tandem white organic light-emitting device using non-modified Ag layer as cathode and interconnecting layer

Tandem white organic light-emitting device (WOLED) using non-modified Ag film as cathode and interconnecting layer is demonstrated. Effective electron injection is achieved when Ag is deposited on 4,7-diphenyl-1,10-phenanthroline electron transporting layer without any modified layer. Single OLED with Ag cathode shows comparable performance to that of device with Mg:Ag cathode. Such tandem WOLED exhibits low driving voltage, high power efficiency (15.1 lm/W at 1000 cd/m²) and low efficiency roll-off. The working mechanisms of single and tandem devices were discussed in detail. These results could provide a simple method to fabricate high performance tandem white OLED.     

Doping-free orange and white phosphorescent organic light-emitting diodes with ultra-simply structure and excellent color stability

We demonstrate simplified doping-free orange phosphorescent organic light-emitting diodes (OLEDs) based on ultrathin emission layer. The optimized orange device has the maximum current efficiency of 52.1 cd/A and power efficiency of 36.3 lm/W, respectively. Efficient simplified doping-free white OLEDs employing blue and orange ultrathin emission layers have excellent color stability, which is attributed to the avoidance of the movement of charges recombination zone and no differential color aging. One white device exhibits high efficiency of 33.6 cd/A (30.1 lm/W). Moreover, the emission mechanism of doping-free orange and white OLEDs is also discussed.     

Efficient solution-processed green and white phosphorescence organic light-emitting diodes based on bipolar host materials

Four carbazole-based bipolar host materials are utilized for solution-processed phosphorescent organic light-emitting diodes (PhOLEDs). These bipolar materials consist of an electron-donor unit (carbazole) linking to a fluorene unit bearing various electron-acceptor units (oxadiazole, cyano, and benzimidazole) via a saturated carbon, giving sufficiently high triplet energies due to the lack of direct electronic coupling between the donor and acceptor(s). The resulting physical properties and bipolar characteristics render the realization of efficient solution-processed green and white OLEDs feasible. The best green light-emitting device based on bipolar host CzFCBI incorporating a stepwise hole-injection/transporting system exhibit a low drive voltage, a maximum external quantum efficiency of 14.0%, a current efficiency of 49.0 cd/A, and a power efficacy of 55.0 lm/W. Moreover, the CzFOXa-based two-component (blue–orange) white light-emitting device shows a warmish-white emission with a maximum external quantum efficiency of 6.9% and stable chromaticity coordinates at different luminance levels and yield a high color rendering index (CRI) reaching 76 at a luminance of 1000 cd/m².     

New hole blocking material for green-emitting phosphorescent organic electroluminescent devices

The new amorphous molecular material, 2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole, that functions as good hole blocker as well as electron transporting layer in the phosphorescent devices. The obtained material forms homogeneous and stable amorphous film. The new synthesized showed the reversible cathodic reduction for hole blocking material and the low reduction potential for electron transporting material in organic electroluminescent (EL) devices. The fabricated devices exhibited high performance with high current efficiency and power efficiency of 45 cd/A and 17.7 lm/W in 10 mA/cm², which is superior to the result of the device using BAlq (current efficiency: 31.5 cd/A and power efficiency: 13.5 lm/W in 10 mA/cm²) as well-known hole blocker. The ITO/DNTPD/α-NPD/6% Ir(ppy)₃ doped CBP/2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole as both hole blocking and electron transporting layer/Al device showed efficiency of 45 cd/A and maximum brightness of 3000 cd/m² in 10 mA/cm².     

Fabrication of high efficiency and color stable white organic light-emitting diodes by an alignment free mask patterning

Small molecule based white organic light-emitting diodes were fabricated by using an alignment free mask patterning method. A phosphorescent red/green emitting layer was patterned by a metal mask without any alignment and a blue phosphorescent emitting layer was commonly deposited on the patterned red/green emitting layer. A white emission could be obtained due to separate emission of red/green and blue emitting layers. A maximum current efficiency of 30.7 cd/A and a current efficiency of 26.0 cd/A at 1000 cd/m² were obtained with a color coordinate of (0.39, 0.45). In addition, there was little change of emission spectrum according to luminance because of balanced red/green and blue emissions.     

Three-peak top-emitting white organic emitting diodes with wide color gamut for display application

By changing the thickness of hole transport layer to control the cavity length, a top-emitting white organic light-emitting diode (TWOLED) with three individual narrow peaks matching well with the three primary color filters has been successfully realized. It is very important to carefully design the multimode microcavity for the achievement of the three-peak spectrum. Compared with the bottom-emitting white organic light-emitting diodes (BWOLEDs), the TWOLEDs exhibit improved color purity and a wider color gamut due to the narrow emissive spectrum. The maximum current efficiency and power efficiency of TWOLED reach 28.9 cd/A and 27.5 lm/W, respectively. It is predicted that this kind of three-peak TWOLEDs is suitable for the high-quality display application.     

Enhancement of electroluminescence efficiency and stability in phosphorescent organic light-emitting diodes with double exciton-blocking layers

A high efficiency phosphorescent organic light-emitting diode (OLED) has been fabricated by introducing a double exciton-blocking layer (d-EBL) between the hole-transporting layer and the light-emitting layer in the device. The device exhibits a yellow emission with a maximum current efficiency of 58.5 cd/A at 117 cd/m², corresponding to the power efficiency of 50.9 lm/W, which is two times improved compared with that of devices having only one traditional single exciton-blocking layer (s-EBL). The efficiency improvement has been investigated through the electroluminescence (EL) spectral analyses in the phosphorescent guest-doped and the non-doped OLEDs. The results demonstrate that the electrons are blocked and the excitons are confined more effectively in the d-EBL-based devices than that in the s-EBL-based devices. In addition, over two times improvement in the lifetime is also achieved in the devices with the d-EBL compared with the devices having a traditional s-EBL.     

Efficient simplified orange and white phosphorescent organic light-emitting devices with reduced efficiency roll-off

Efficient orange phosphorescent organic light-emitting devices based on simplified structure with maximum efficiencies of 46.5 lm/W and 51.5 cd/A were reported. One device had extremely low efficiency roll-off with efficiencies of 50.6 cd/A, 45.0 cd/A and 39.2 cd/A at 1000 cd/m², 5000 cd/m² and 10,000 cd/m² respectively. The reduced efficiency roll-off was attributed to more balanced carrier injection and broader recombination zone. The designed simplified white device showed much lower efficiency roll-off than the control one based on multiple emitting layers. The efficiency of simplified white device was 40.8 cd/A at 1000 cd/m² with Commission Internationale de I’Eclairage coordinates of (0.39, 0.46).     

Efficient fluorescent white organic light-emitting diodes using co-host/emitter dual-role possessed di(triphenyl-amine)-1,4-divinyl-naphthalene

Efficient fluorescent white organic light-emitting diodes with low carrier-injection barriers were fabricated with device structure of indium tin oxide/N,N′-bis-(1-naphthy)-N,N′-diphenyl-1,1′-biphenyl-4-4′-diamine/white emission layer/1,3,5-tris(N-phenyl-benzimidazol-2-yl)benzene/lithium fluoride/aluminium. By blending in the blue host of 1-butyl-9,10-naphthalene-anthracene in the emissive layer an efficient electro-luminescent greenish-blue co-host of di(triphenyl-amine)-1,4-divinyl-naphthalene, with the doping of a trace amount of red dye of 4-(dicyano-methylene)-2-methyl-6-(julolidin-4-yl-vinyl)-4H-pyran, bright and colour-stable white emission with high power-efficiency of 14.6 lm/W at 100 cd/m² or current efficiency of 19.2 cd/A at 300 cd/m² or 18.7 cd/A at 10,000 cd/m² was obtained. The resulted synergistic increase in brightness and efficiency may be attributed to the presence of cascading new routes with comparatively lower electron injection barrier.     

High current conduction with high mobility by non-radiative charge recombination interfaces in organic semiconductor devices

We report a unique non-radiative p-n-p junction structure to provide high current conduction with high mobility in organic semiconductor devices. The current conduction was improved by increasing p-n junctions made with intrinsic p-type hole transport layer and n-type electron transport layer. The excellent hole mobility of 5.3 × 10^?1 cm²/V s in this p-n-p device configuration is measured by the space charge limited current method with an electric field of 0.3 MV/cm. Enhanced current conduction of 248% at 4.0 V was observed in fluorescent blue organic light-emitting diodes with introduction of non-radiative p-n-p-n-p junction interfaces. Thereupon, the power efficiency at 1000 cd/m² was improved by 22% and the driving voltage also was reduced by 17%, compared to that of no interface device. Such high current conduction with high mobility is attributed to the carrier recombination at p-n-p interfaces through coulombic interaction. This non-radiative p-n-p junction structure suggested in this report can be very useful for many practical organic semiconductor device applications.     

Color stable phosphorescent white organic light-emitting diodes with double emissive layer structure

In this paper, we report color stable phosphorescent white organic light-emitting diodes (OLEDs) based on a double emissive layer (EML) structure composed of blue and red/green phosphorescent units. Deep hole trapping situation of red and green dopants at the red/green EML could induce less voltage dependent white spectral characteristics by restricting the change of exciton generation zone. A wide band-gap host material, 2,6-bis(3-(carbazol-9-yl)phenyl)pyridine (26DCzPPy), was used for achieving such deep-trap generation. Fabricated phosphorescent white OLED shows a slight color coordinate change of (?0.002, +0.002) from 1000 cd/m² to 5000 cd/m² with power efficiency of 38.7 lm/W and current efficiency of 46.4 cd/A at 1000 cd/m². In addition, negligible color changes were observed by delaying red dopant saturation time using optimum red dopant concentration.     

Small polymeric nano-dot enhanced pure-white organic light-emitting diode

Marked efficiency improvement of a spin-coated phosphorescent pure-white organic light-emitting diode was obtained by incorporating a novel small polymeric nano-dot (PND) in the hole-transporting layer. The resultant device efficiency strongly depended on the concentration and size of the PND used. The resultant power efficiency at 100 cd/m², for example, was increased from 6.8 to 23.7 lm/W, an increase of 350%, as 14 wt% PND of 8 nm in size was employed. The improvement may be attributed to a better carrier-injection balance resulted from hole trapping on the PND.     

Efficient fluorescent white organic light-emitting diodes with blue-green host of di(4-fluorophenyl)amino-di(styryl)biphenyl

Efficient fluorescent white organic light-emitting diodes are fabricated with the use of an efficient electro-fluorescence blue-green host material di(4-fluorophenyl)amino-di(styryl)biphenyl, doped with red dye 4-(dicyano-methylene)-2-methyl-6-(julolidin-4-yl-vinyl)-4H-pyran. One resulting two-wavelength white emission device shows a maximum external quantum efficiency of 4.8% and a high power efficiency of 14.8 lm/W with 100 cd/m² at 3.8 V. The high efficiency may be attributed to the high electroluminescence character of the host, relatively high host-to-guest energy transfer efficiency, and effective device architecture.     

All-small-molecule efficient white organic light-emitting diodes by multi-layer blade coating

Blue and white small-molecule organic light-emitting diodes are fabricated by multi-layer blade coating on hot plate at 80 °C with hot wind. Uniform multi-layer structures are made without dissolution due to rapid drying. Only small molecules originally developed for vacuum deposition are used. For hole transport layer of, 4′,4″-tris(carbazol-9-yl)triphenylamine (TCTA), electron transport layer of 2,2′,2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TBPI), emissive layer host of, 6-bis(3-(9H-carbazol-9-yl)phenyl)pyridine (26DCzPPy), triplet emitters of bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium(III) (FIrpic), and cathode of LiF/Al, the peak current efficiency for blue emission is 25.1 cd/A (10.8% and 9.3 lm/W). Orange emitter iridium(III)bis (4-(4-t-butylphenyl) thieno[3,2-c]pyridinato-N,C2′)acetylacetonate (PO-01-TB) is added to obtain white emission with CIE coordinate of (0.39, 0.46) [1]. The current efficiency is 34.2 cd/A (11.6% and 12 lm/W) at maximum, 32.4 cd/A at 1000 cd/m², and 31 cd/A at 10,000 cd/m².     

Electrical and optical characteristics of phosphorescent organic light-emitting device with thin-codoped layer insertion

In this paper, we demonstrated the changes of electrical and optical characteristics of a phosphorescent organic light-emitting device (OLED) with tris(phenylpyridine)iridium Ir(ppy)₃ thin layer (4 nm) slightly codoped (1%) inside the emitting layer (EML) close to the cathode side. Such a thin layer helped for electron injection and transport from the electron transporting layer into the EML, which reduced the driving voltage (0.40 V at 100 mA/cm²). Electroluminescence (EL) spectral shift at different driving voltage was observed in our blue OLED with [(4,6-di-fluoropheny)-pyridinato-N,C^2′]picolinate (FIrpic) emitter, which came from the recombination zone shift. With the incorporation of thin-codoped Ir(ppy)₃, such EL spectral shift was almost undetectable (color coordinate shift (0.000, 0.001) from 100 to 10,000 cd/m²), due to the compensation of Ir(ppy)₃ emission at low driving voltage. Such a methodology can be applied to a white OLED which stabilized the EL spectrum and the color coordinates ((0.012, 0.002) from 100 to 10,000 cd/m²).     

Highly efficient green top-emitting organic light-emitting devices with metal electrode structure

In this work, the electrical and optical characteristics of top-emitting organic light-emitting device (TEOLED) using metal Ag as anode with different thicknesses have been investigated. The emission peak of fabricated TEOLED is 512 nm for a full-width at half-maximum (FWHM) of 48 nm in forward direction. The TEOLED turns on at 3 V with luminance of 2.38 cd/m² and reaches 16,300 cd/m² at 9 V. The maximum of current efficiency is 5.2 cd/A at 7 V, corresponding to the external quantum efficiency of 1.72%.     

Low driving voltage white organic light-emitting diodes with high efficiency and low efficiency roll-off

Single emission layer white organic light-emitting diodes (WOLEDs) showing high color stability, low turn-on voltage, high efficiency and low efficiency roll-off by incorporating iridium(III) bis[(4,6-difluo-rophenyl)-pyridinato-N,C2] (FIrpic) and bis(2-phenylbenzothiazolato) (acetylacetonate)iridium(III) (Ir(BT)₂(acac)) phosphors dyes have been demonstrated. Our WOLEDs without any out-coupling schemes as well as n-doping strategies show low operating voltages, low turn-on voltage (defined for voltage to obtain a luminance of 1 cd/m²) of 2.35 V, 79.2 cd/m² at 2.6 V, 940.5 cd/m² at 3.0 V and 10 300 cd/m² at 4.0 V, respectively, and achieve a current efficiency of 40.5 cd/A, a power efficiency of 42.6 lm/W at a practical brightness of 1000 cd/m², and a low efficiency roll-off 14.7% calculated from the maximum efficiency value to that of 5000 cd/m². Such improved properties are attributed to phosphors assisted carriers transport for achieving charge carrier balance in the single light-emitting layer (EML). Meanwhile the host–guest energy transfer and direct exciton formation process are two parallel pathways serve to channel the overall excitons to dopants, greatly reduced the unfavorable energy losses.     

High-efficiency low color temperature organic light emitting diodes with solution-processed emissive layer

Low color temperature (CT) lighting provides a warm and comfortable atmosphere and shows mild effect on melatonin suppression. A high-efficiency low CT organic light emitting diode can be easily fabricated by spin coating a single white emission layer. The resultant white device shows an external quantum efficiency (EQE) of 22.8% (34.9 lm/W) with CT 2860 K at 100 cd/m², while is shown 18.8% (24.5 lm/W) at 1000 cd/m². The high efficiency may be attributed to the use of electroluminescence efficient materials and the ambipolar-transport host. Besides, proper device architecture design enables excitons to form on the host and allows effective energy transfer from host to guest or from high triplet guest to low counterparts. By decreasing the doping concentration of blue dye in the white emission layer, the device exhibited an orange emission with a CT of 2280 K. An EQE improvement was observed for the device, whose EQE was 27.4% (38.8 lm/W) at 100 cd/m² and 20.4% (24.6 lm/W) at 1000 cd/m².     

Solution-processed cathode-interlayer-free deep blue organic light-emitting diodes

Efficient non-doped deep blue organic light-emitting diodes (OLEDs) were fabricated by solution-processing method by using a series of small molecules consisting of various contents of triphenylamine and phosphonate-featured fluorene units as the emitting layer. Without any electron-injection layer, one of the optimal devices with a simple double-layer device configuration exhibits a maximal current efficiency of 2.59 cd A⁻¹ at 6.8 V (1.72 mA cm⁻²) with a CIE coordinates of (0.163, 0.097). These double-layer devices are demonstrated with excellent color-stability under a wide range of operating current density. The current work indicates that electron-rich triphenylamine moiety incorporated with phosphonate-featured fluorene units could be utilized as building blocks to construct a multi-functional platform combining good electron-injection property, carrier-transport property, and efficient electroluminescence. It also provides an approach to achieve a structure-simplified color-stable efficient blue OLED.     

Simple-structured efficient white organic light emitting diode via solution process

High-efficiency white emission is crucial to the design of energy-saving display and lighting panels, whereas solution-process feasibility is highly desirable for large area-size and cost-effective roll-to-roll manufacturing. In this study, we demonstrate highly-efficient, bright and chromaticity stable white organic light emitting diodes (OLEDs) with solution-processed single emissive layer. The resultant best white OLED shows excellent electroluminescence performance with forward-viewing external quantum efficiency, current efficiency and power efficiency of 22.7%, 48.8 cd A^− 1 and 27.8 lm W^− 1 at 100 cd m^− 2, respectively, with a maximum luminance of 19,590 cd m^− 2. Furthermore, we also observed an increment of 112% in the power efficiency, 86.9% in the current efficiency and a decrement of 39.2% in the external quantum efficiency at 100 cd m^− 2 as the doping concentration of blue dye was increased from 10 wt% to 25 wt% in the devices. The better efficiency performance may be attributed to the effective exciton-confining device architecture and low-energy barrier for electrons to inject from the hole-blocking electron-transport layer to the host layer.