一类非线性时变系统基于观测器的反馈稳定化

1　引言目前,有关非线性系统的状态反馈控制已取得了许多引人注目的研究结果,其中状态可测是此控制方法中的一个必不可少的假设.在实际中,许多系统的状态是部分可测或不完全可测,故构造观测器,并用估计状态实现反馈控制是一个非常有意义的研究工作.本文研究了一类仿射非线性时变系统基于状态观测器的输出反馈稳定控制问题.首先设计了系统的状态观测器,然后综合控制器和观测器得到了非线性输出反馈控制器,并证明了反馈后闭环系统的指数稳定性.研究结果表明,系统的控制器与观测器可以分离独立进行设计.2　系统的描述及预备知识考虑下列非线性…     

约束Hammerstein系统输出反馈非线性预测控制

针对具有状态、输入和中间变量约束的Hammerstein系统,采用两步法控制策略,给出一种新的可保证闭环系统指数稳定的输出反馈非线性模型预测控制算法.基于Hammerstein系统的特殊结构,结合状态观测器给出无约束线性环节的输出反馈最优控制律,通过滚动优化一有限时域的约束优化问题计算实际控制量.给出保证闭环系统指数稳定的充分条件.以工业双环管聚丙烯装置牌号切换控制为例进行仿真,仿真结果验证该算法的有效性和实用性.     

非线性微分-代数系统的输出反馈镇定:基于线性采样控制

对满足指数1和线性增长条件的非线性微分-代数系统,本文证明其采样输出反馈镇 定控制问题可解.首先,给出一个线性显式非初始化状态观测器设计;然后,构造出线性的采样输出 反馈控制器,使得整个闭环系统渐近稳定.仿真结果表明了所提控制方法的有效性.     

带有常数干扰的正则线性系统的镇定

本文考虑带有常数干扰的抽象正则线性系统的状态反馈镇定问题.本文控制设计采用线性系统的动态补偿方法,将传统的PID控制推广到无穷维正则线性系统.通过引入积分作用,控制器可以有效地补偿常数干扰.论文给出了具体的状态反馈法则,并证明了对应闭环系统的指数稳定性.理论结果被应用于带有常数干扰的不稳定热方程,给出了控制器及其闭环系统的指数稳定性,数值仿真验证了本文理论结果的有效性.     

具有边界扰动的不确定Euler-Bernoulli梁方程输出反馈控制

针对带有边界扰动、内部不确定扰动和外部扰动的Euler-Bernoulli梁方程,为克服传统扰动观测器引入的高增益及未知扰动导数难以准确求解问题,本文将主动干扰抑制控制(ADRC)技术应用到Euler-Bernoulli梁方程这个偏微分方程(PDE)系统上,提出并设计了一种新的在线扰动观测器,可实时估计扰动值.依据估计扰动值,设计了一个边界输出反馈控制器.仿真结果表明,本文所提出的方法可很好地实现对内部不确定扰动和外部扰动的估计,配合输出反馈控制器,可对边界扰动进行有效抑制,进而实现系统的指数稳定.     

基于状态反馈的倒摆系统的设计与仿真

倒立摆系统是一个复杂的、绝对不稳定的非线性系统.本文给出了二级倒立摆系统的硬件组成,从运动学的角度建立了系统的数学模型,并应用状态反馈对二级倒摆系统进行控制设计,经仿真验证得到了较好的控制效果.     

约束Hammerstein系统输出反馈非线性预测控制

针对具有状态、输入和中间变量约束的Hammerstein系统,采用两步法控制策略,给出一种新的可保证闭环系统指数稳定的输出反馈非线性模型预测控制算法。基于Hammerstein系统的特殊结构,结合状态观测器给出无约束线性环节的输出反馈最优控制律,通过滚动优化一有限时域的约束优化问题计算实际控制量。给出保证闭环系统指数稳定的充分条件。以工业双环管聚丙烯装置牌号切换控制为例进行仿真,仿真结果验证该算法的有效性和实用性。     

一类非线性微分-代数系统的L2-增益分析及状态反馈H∞控制

分析了一类非线性微分-代数系统的L2-增益,并讨论了一类状态反馈H∞控制问题.在一定条件下给出了控制器的设计,并保证了闭环指数为1且零解渐近稳定.     

电力系统有限时间稳定控制策略

电力系统是典型的非线性系统,当电力系统遭受周期性负荷扰动时,只要周期性负荷的幅值满足一定条件,就可能诱发混沌振荡.电力系统中的混沌振荡可能导致电压崩溃,严重危害系统的稳定与运行安全.鉴于此,针对四阶电力系统,基于有限时间稳定原理,设计一种反馈控制器,对系统发生的混沌进行控制.数值仿真分析表明,所设计的控制器能够有效地对电力系统发生的混沌进行控制,并且对外在干扰和系统参数具有很强的鲁棒性,当减小所设计的控制律中的指数参数,或者增大其余任意控制律参数时,系统恢复到目标平衡态所需的时间都将减少.     

拖挂式移动机器人反馈镇定控制问题研究

由于拖挂式移动机器人系统存在非完整约束,导致系统的反馈镇定控制问题不存在任何连续时不变渐近稳定控制方法,为此基于有限时间高阶滑摸方法提出一种非连续的反馈镇定控制方法.首先分析了系统的控制特性,证明系统的位形控制问题不存在稳定的时不变的光滑的反馈控制;然后利用进行坐标和输入变换,将系统变换为链接形式;基于链式系统利用有限时间高阶滑模设计了一种非连续的控制方法.数值仿真结果表明该控制方法能够在有限时间内控制拖挂式移动机器人稳定在给定位形.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.