Tunable and highly reproducible surface-enhanced Raman scattering substrates made from large-scale nanoparticle arrays based on periodically poled LiNbO3 templates

Abstract

This work describes novel surface-enhanced Raman scattering (SERS) substrates based on ferroelectric periodically poled LiNbO₃ templates. The templates comprise silver nanoparticles (AgNPs), the size and position of which are tailored by ferroelectric lithography. The substrate has uniform and large sampling areas that show SERS effective with excellent signal reproducibility, for which the fabrication protocol is advantageous in its simplicity. We demonstrate ferroelectric-based SERS substrates with particle sizes ranging from 30 to 70 nm and present tunable SERS effect from Raman active 4-mercaptopyridine molecules attached to AgNPs when excited by a laser source at 514 nm.     

Silver nanoparticles deposited on anodic aluminum oxide template using magnetron sputtering for surface-enhanced Raman scattering substrate

Low-cost and highly sensitive surface-enhanced Raman scattering (SERS) substrates have been fabricated by a simple anodizing process and a magnetron sputtering deposition. The substrates, which consist of silver nanoparticles embedded on anodic aluminum oxide (AAO) templates, are investigated by a scanning electron microscope and a confocal Raman spectroscopy. The SERS activities are demonstrated by Raman scattering from adsorbed solutions of methylene blue and pyridine on the SERS substrate surface. The most optimized SERS substrate contains the silver nanoparticles, with a size distribution of 10-30 nm, deposited on the AAO template. From a calculation, the SERS enhancement factor is as high as 8.5 × 10⁷, which suggests strong potentials for direct applications in the chemical detection and analyses.     

Preparation of Ag2S–Graphene nanocomposite from a single source precursor and its surface-enhanced Raman scattering and photoluminescent activity

Ag₂S–Graphene nanocomposite was prepared via a relatively facile hydrothermal method, using a single-source molecular (silver diethyldithiocarbamate [Ag(DDTC)]) as precursor and graphene sheets as a support material. The composite was characterized by X-ray power diffraction, X-ray photoelectron spectroscopy, Field-emission scanning electron microscope, transmission electron microscopy, Fourier transform infrared, Raman spectra and fluorescence spectroscopy. The experimental results show that the Ag₂S–Graphene nanocomposite displays surface-enhanced Raman scattering (SERS) activity for graphene oxide and reveals relatively better fluorescence property compared with pure Ag₂S.     

Superhydrophobicity and surface enhanced Raman scattering activity of dendritic silver layers

Dendritic silver nanostructured surface has been prepared on copper substrate by a simple replacement reaction. It was observed that morphology of the silver surface became much rough with reaction time, from initial nanosized clusters to nanostructured dendrites. The silver surface modified with dodecanethiol showed great superhydrophobicity. It was also found that the dendritic silver nanostructured surface demonstrated highly sensitive surface enhanced Raman scattering (SERS) character. It is expected that the dendritic silver surface may be applied as molecular probe and biological sensing.     

Performance enhancement of paper-based SERS chips by shell-isolated nanoparticle-enhanced Raman spectroscopy

Paper-based flexible surface-enhanced Raman scattering (SERS) chips have been demonstrated to have great potential for future practical applications in point-of-care testing (POCT) due to the potentials of massive fabrication, low cost, efficient sample collection and short signal acquisition time. In this work, common filter paper and Ag@SiO₂core-shell nanoparticles (NP) have been utilized to fabricate SERS chips based on shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS). The SERS performance of the chips for POCT applications was systematically investigated. We used crystal violet as the model molecule to study the influence of the size of the Ag core and the thickness of the SiO₂coating layer on the SERS activity and then the morphology optimized Ag@SiO₂core-shell NPs was employed to detect thiram. By utilizing the smartphone as a miniaturized Raman spectral analyzer, high SERS sensitivity of thiram with a detection limit of 10⁻⁹M was obtained. The study on the stability of the SERS chips shows that a SiO₂shell of 3 nm can effectively protect the as-prepared SERS chips against oxidation in ambient atmosphere without seriously weakening the SERS sensitivity. Our results indicated that the SERS chips by SHINERS had great potential of practical application, such as pesticide residues detection in POCT.     

Surface enhanced Raman scattering on SiO2/Ag nanoparticles aggregate and preparation of nitrogen-doped carbon dots by pyrolysis of Co(2,2′-bipyridine)2(dicyanamide)2

Co(2,2'-bipyridine)₂(dicyanamide)₂, Co(bpy)₂(N(CN)₂)₂, was synthesised by solution crystallisation method. The ‘external’ lattice modes of Co(bpy)₂(N(CN)₂)₂ crystal have been determined by use of the method of nuclear site group analysis. Based on the surface enhanced Raman scattering (SERS) activity of silver nanoparticles (Ag-NPs), a SiO₂/Ag-NPs/Co(bpy)₂(N(CN)₂)₂ aggregate was prepared in order to better analyse the adsorption orientation of the cobalt complex on the surface of Ag-NPs. The result of the SERS measurement indicates that the molecular plane presents a tilted orientation with respect to the Ag-NPs surface. The system described here could serve as the basis for a study of accurate and available SERS sensor. The pyrolysis products at 553 and 593 K, respectively, in air have been investigated. The results showed that nitrogen-doped carbon dots were obtained from the pyrolysis products of Co(bpy)₂(N(CN)₂)₂ calcined at 553 K. This process can be exploited as a simple and effective path for the synthesis of nitrogen-doped carbon dots by using nitrogen-containing metal organic complex as precursors.     

Deposition of the fractal-like gold particles onto electrospun polymethylmethacrylate fibrous mats and their application in surface-enhanced Raman scattering

The ultrafine polymethylmethacrylate fibers containing gold nanoparticles have been prepared by using the electrospinning technique. Then the continuously coarse gold films formed by fractal-like thorny gold particles were deposited on the organic eletrospun fiber surface by an electroless process. The morphology of coarse gold films was characterized by scanning electron and transmission electron microscopy. The results revealed that the morphology of the gold particles was affected not only by the amount of gold seeds embedded in the organic fibers but also by the amount of gold deposited on the fiber's surfaces. The surface-enhanced Raman scattering (SERS) effect of the fibrous mats coated with gold films was evaluated by using Rhodamine B as an adsorbate. The results indicated that this kind of fibrous mat exhibited high and reproducible SERS activity and could be developed as highly sensitive SERS substrate.     

Analysis of thin film coatings on poly(ethylene terephthalate) by confocal Raman microscopy and surface-enhanced Raman scattering

The characterization of thin coatings on polymers such as poly(ethylene terephthalate) (PET) is required in order to study chemical composition and coating continuity. Two different methods of applying Raman spectroscopy for this purpose are compared in this paper. Using confocal Raman microscopy, thick coatings (> 10 microns) are relatively easily identified; however, the Raman scattering from the acrylic coatings commonly used is much weaker than that of PET and consequently, there is a background due to the substrate. Thin acrylic coatings (< 1 micron) usually cannot be detected. Surface-enhanced Raman scattering (SERS) of uncoated PET gives intense signals and if the spectra are taken from the metal-coated side, there is no evidence of the underlying Raman scattering from the bulk. Acrylic coatings do not give sufficiently strong or reproducible SERS to be reliably identified, but even thin (20 nm) coatings completely block the SERS from the substrate. Only where gaps appear in the coating is the SERS of the underlying PET seen. To detect a positive signal from the coating, SERS active labels were incorporated into the acrylic at low concentrations either as a physical mixture or as reactive co-monomers. This uniquely labels the coating and allows detection and, in principle, mapping of the coverage. Thus, for thick (> > 1 micron) coatings, normal Raman spectroscopy is an effective technique for detecting the presence of the surface coating. However, it is ineffective with thin (< 1 micron) coatings, and SERS alone only indicates where the coating is incomplete or defective. However, when a SERS label is added, spectra can be detected from very thin coatings (20 nm). The concentration of the labels is sufficiently low for the coating to remain colorless.     

Preparation of dendritic Ag/Au bimetallic nanostructures and their application in surface-enhanced Raman scattering

Dendritic Ag/Au bimetallic nanostructures have been synthesized via a multi-stage galvanic replacement reaction of Ag dendrites in a chlorauric acid (HAuCl₄) solution at room temperature. After five stages of replacement reaction, one obtains structures with protruding nanocubes; these will mature into many porous structures with a few Ag atoms that are left over dendrites. The morphological and compositional changes which evolved with reaction stages were analyzed by using scanning electron microscopy, transmission electron microscopy, UV-visible spectroscopy, selected area electron diffraction and energy-dispersive X-ray spectrometry. The replacement of Ag with Au was confirmed. A formation mechanism involving the original development of Ag dendrites into porous structures with the growth of Au nanocubes on this underlying structure as the number of reaction stages is proposed. This was confirmed by surface-enhanced Raman scattering (SERS). The dendritic Ag/Au bimetallic nanostructures could be used as efficient SERS active substrates. It was found that the SERS enhancement ability was dependent on the stage of galvanic replacement reaction.     

Ultrathin Molybdenum Dioxide Nanosheets as Uniform and Reusable Surface‐Enhanced Raman Spectroscopy Substrates with High Sensitivity

Metal oxides have advantages over the traditional noble metals to be used as substrate materials for surface‐enhanced Raman spectroscopy (SERS) with low cost, versatility, and biocompatibility, but their enhancement factors are generally quite low with a poor limit of detection. Here, ultrathin molybdenum dioxide (MoO₂) nanosheets synthesized by chemical vapor deposition demonstrated in large area are used as SERS substrates with superior signal uniformity in the whole area with a limit of detectable concentration down to 4 × 10^?8m and enhancement factor up to 2.1 × 10⁵, exceeding that of 2D materials and comparable to that of noble metal films. More practically important, the planar MoO₂ substrate is more robust than noble metals and shows excellent reusability and uniformity, which is usually prohibited for nanostructured or nanoparticle‐based metal oxide substrates. The enhancement is mainly attributed to the surface plasmon resonance effect as evidenced by the first principle calculations and UV–vis absorption spectroscopy characterization, which can be further increased by decreasing the thickness of the MoO₂ nanosheets. The overall superior performance makes the MoO₂ nanosheets an ideal substrate for practical SERS applications.     

Surface-Enhanced Raman Scattering on Template-Embedded Gold Nanorod Substrates

Surface-enhanced Raman scattering (SERS) of rhodamine 6G was investigated on template-embedded gold nanorods produced by anodic aluminum oxide template-assisted nanofabrication. A signal enhancement of about 10⁶ was obtained. Two-dimensional arrays of gold nanospheres with different diameters and gap sizes were used as simplified model systems. SERS substrate design principles were investigated in order to achieve maximum electromagnetic enhancement of both the incident and Raman scattered fields.     

Role of the micro- and nanostructure in the performance of surface-enhanced Raman scattering substrates assembled from gold nanoparticles

Highly active and stable substrates for surface-enhanced Raman scattering (SERS) can be fabricated by using colloidal crystals to template gold nanoparticles into structured porous films. The structure-dependent performance of these SERS substrates was systematically characterized with cyanide in continuous flow microfluidic chambers. A matrix of experiments was designed to isolate the SERS contributions arising from nano- and microscale porosity, long-range ordering of the micropores, and the thickness of the nanoparticle layer. The SERS results were compared to the substrate structure observed by scanning electron microscopy (SEM) and optical microscopy to correlate substrate structure to SERS performance. The Raman peak intensity was consistently highest for nanoporous substrates with three-dimensionally ordered micropores, and decreases if the micropores are not ordered or not templated. Removing the nanoscale porosity by fusion of the nanoparticles (without removing the large micropores) leads to a drastic plunge in substrate performance. The peak intensity does not strongly correlate to the thickness of the nanoparticle films. The results make possible the efficient controlled fabrication of stable, reproducible, and highly active substrates for SERS based chemical sensors with continuous sampling.     

Alumina-coated Ag nanocrystal monolayers as surfaceenhanced Raman spectroscopy platforms for the direct spectroscopic detection of water splitting reaction intermediates

A novel Ag-alumina hybrid surface-enhanced Raman spectroscopy （SERS） platform has been designed for the spectroscopic detection of surface reactions in the steady state. Single crystalline and faceted silver （Ag） nanoparticles with strong light scattering were prepared in large quantity, which enables their reproducible self-assembly into large scale monolayers of Raman sensor arrays by the Langrnuir-Blodgett technique. The close packed sensor film contains high density of sub-nm gaps between sharp edges of Ag nanoparticles, which created large local electromagnetic fields that serve as ＂hot spots＂ for SERS enhancement. The SERS substrate was then coated with a thin layer of alumina by atomic layer deposition to prevent charge transfer between Ag and the reaction system. The photocatalytic water splitting reaction on a monolayer of anatase TiO2 nanoplates decorated with Pt co-catalyst nanoparticles was employed as a model reaction system. Reaction intermediates of water photooxidation were observed at the TiO2/solution interface under UV irradiation. The surface-enhanced Raman vibrations corresponding to peroxo, hydroperoxo and hydroxo surface intermediate species were observed on the TiO2 surface, suggesting that the photo-oxidation of water on these anatase TiO2 nanosheets may be initiated by a nucleophilic attack mechanism.     

C18-modified metal-colloid substrates for surface-enhanced Raman detection of trace-level polycyclic aromatic hydrocarbons in aqueous solution

Metal colloids immobilized on a glass support substrate are modified with a self-assembled alkylsilane (C18) layer to promote adsorption of polycyclic aromatic hydrocarbons from aqueous solutions. Detection of these compounds from low concentration solutions is accomplished by using surface-enhanced Raman scattering (SERS). SERS spectra of pyrene adsorbed to C18-modified immobilized silver colloids are dominated by Raman bands that are not consistent with pyrene and indicate that pyrene undergoes a chemical reaction at the surface. The origins of this surface product are investigated, and it is determined that silver and oxygen are required to form the product, whose Raman spectrum is consistent with oxidation to a quinone. When a C18-modified gold-colloid substrate is used, Raman scattering consistent with unreacted pyrene is observed. The adsorption and detection of pyrene adsorbed from low (2 ppb) concentration aqueous solutions onto C18-modified gold-colloid substrates is reported; naphthalene and phenanthrene are detected at approximately 5 ppb. Adsorption kinetics are rapid (<5 min), and the concentration-dependent SERS response is consistent with a Langmuir isotherm.     

Silver-doped sol-gel film as a surface-enhanced Raman scattering substrate for detection of uranyl and neptunyl ions

A surface-enhanced Raman scattering (SERS) substrate containing silver particles was prepared by an acid-catalyzed sol-gel method. Silver nitrate was first doped into the sol-gel film followed by chemical reduction of the silver ions with sodium borohydride to produce silver particles. This silver-doped sol-gel substrate exhibits strong enhancement of Raman scattering from adsorbed uranyl ions with a detection limit of 8.5 x 10(-8) M, which is comparable to existing methods of uranyl detection such as spectrophotometry, fluorometry, and a SERS method based on ligand-modified solution silver colloids. However, in the present method, no preconcentration steps, chromogens, or complexing ligands are needed. Compared with the SERS method using Ag colloidal sols, the silver-doped sol-gel film has the advantage that the silver particles trapped in the sol-gel matrix are much more stable than Ag colloids in liquid media. Furthermore, porous silica sol-gel materials are known to have affinities toward many inorganic and organic molecules. The enhanced adsorption affinities could also lead to the increased SERS sensitivity. The performance of the new silver-doped sol-gel substrate was evaluated with uranyl ions and compared to that of a SERS substrate based on silver-coated silica beads prepared by vacuum deposition. The detection limit for the silver-doped sol-gel film was 104 times lower than that for the silver-coated silica beads. The sol-gel substrate was further used to obtain, for the first time, the surface-enhanced Raman spectrum of neptunyl ions in dilute aqueous solutions.     

A novel method for fabricating the surface-enhanced Raman scattering substrates and its enhanced properties

We have got large area surface-enhanced Raman scattering (SERS) substrates with uniform high enhancement factors by the so-called moulage method for the first time. A silver film (99.99%) with several millimeters thickness was thermally evaporated on the porous anodic alumina templates and the SERS substrate was got after moving off the templates. Surface-enhanced Raman scattering spectra of pyridine (0.01 Mol/L) were measured under 632.8 nm excitation. The experimental enhancement factors were more than 10(5) and S/N(p-p) around 100 was obtained. We have compared the SERS spectra of pyridine collected from different locations on the same SERS substrate and different substrates, which illustrate the well uniform enhance properties and the reproducibility of this method, respectively. The comparison of the SERS spectra, obtained from the SERS substrates and Ag film evaporated directly on glass slide, have proved that the electromagnetic coupling between two adjacent nanoparticles was important to the SERS effect. We also used rhodamine 6G as the probe molecules and found that the different molecules were very sensitive to the morphology of the SERS substrates.     

Wafer‐Scale Double‐Layer Stacked Au/Al2O3@Au Nanosphere Structure with Tunable Nanospacing for Surface‐Enhanced Raman Scattering

Fabricating perfect plasmonic nanostructures has been a major challenge in surface enhanced Raman scattering (SERS) research. Here, a double‐layer stacked Au/Al₂O₃@Au nanosphere structures is designed on the silicon wafer to bring high density, high intensity “hot spots” effect. A simply reproducible high‐throughput approach is shown to fabricate feasibly this plasmonic nanostructures by rapid thermal annealing (RTA) and atomic layer deposition process (ALD). The double‐layer stacked Au nanospheres construct a three‐dimensional plasmonic nanostructure with tunable nanospacing and high‐density nanojunctions between adjacent Au nanospheres by ultrathin Al₂O₃ isolation layer, producing highly strong plasmonic coupling so that the electromagnetic near‐field is greatly enhanced to obtain a highly uniform increase of SERS with an enhancement factor (EF) of over 10⁷. Both heterogeneous nanosphere group (Au/Al₂O₃@Ag) and pyramid‐shaped arrays structure substrate can help to increase the SERS signals further, with a EF of nearly 10⁹. These wafer‐scale, high density homo/hetero‐metal‐nanosphere arrays with tunable nanojunction between adjacent shell‐isolated nanospheres have significant implications for ultrasensitive Raman detection, molecular electronics, and nanophotonics.     

Diamond and Diamond-like-Carbon Growth on Si (100) by Hot Filament-Assisted RF Plasma CVD

Diamond and diamond-like carbon (DLC) crystallites can be grown on a Si (100) substrate by hot filament-assisted RF plasma CVD in a low-vacuum (2-Torr) environment from C₂H₂ without using hydrogen. The deposition was carried out at 900°C onto the precleaned diamond polished Si (100) substrate. XRD and Raman spectra revealed the presence of diamond, graphite, lonsdaleite, and high-order polymeric hydrocarbon phases. The morphology observed by SEM shows typical habit and facets of the diamond crystallites grown on silicon. An attempt was made to explain some discrepancies observed in the XRD and Raman spectra of our multiphasic DLC films.     

Ultrasensitive Surface‐Enhanced Raman Spectroscopy Detection Based on Amorphous Molybdenum Oxide Quantum Dots

Surface‐enhanced Raman spectroscopy (SERS) based on plasmonic semiconductive material has been proved to be an efficient tool to detect trace of substances, while the relatively weak plasmon resonance compared with noble metal materials restricts its practical application. Herein, for the first time a facile method to fabricate amorphous H_xMoO₃ quantum dots with tunable plasmon resonance is developed by a controlled oxidization route. The as‐prepared amorphous H_xMoO₃ quantum dots show tunable plasmon resonance in the region of visible and near‐infrared light. Moreover, the tunability induced by SC CO₂ is analyzed by a molecule kinetic theory combined with a molecular thermodynamic model. More importantly, the ultrahigh enhancement factor of amorphous H_xMoO₃ quantum dots detecting on methyl blue can be up to 9.5 × 10⁵ with expending the limit of detection to 10^?9 m . Such a remarkable porperty can also be found in this H_xMoO₃‐based sensor with Rh6G and RhB as probe molecules, suggesting that the amorphous H_xMoO₃ quantum dot is an efficient candidate for SERS on molecule detection in high precision.     

High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.