共查询到20条相似文献,搜索用时 453 毫秒
1.
玻璃钢复合材料基体树脂的发展现状 总被引:8,自引:4,他引:8
本文主要介绍玻璃钢复合材料基体树脂近几年发展情况,介绍基体树脂改性和应用,主要包括:不饱和聚酯树脂、环氧树脂、乙烯基酯树脂、酚醛树脂,还简单介绍了热塑性基体树脂及应用。 相似文献
2.
3.
4.
5.
试验选用异丁醇醚化的三聚氰胺甲醛树脂分别与醇酸树脂、环氧树脂和丙烯酸树脂进行复配制漆,对这3类氨基涂料综合性能进行了考察。试验表明,当与醇酸树脂复配时树脂配比为1∶3、溶剂用量在6%~10%时涂膜性能较好;与环氧树脂复配时树脂配比为3∶1时涂膜性能最佳,添加萘酸钙催干效果较好;与含羟基丙烯酸树脂复配时树脂配比为1∶3时涂膜性能最佳。 相似文献
6.
7.
8.
新型耐酸耐碱胶泥的研制 总被引:2,自引:0,他引:2
本文设计了一种新型呋喃树脂。经过试验确定了新型树脂的合成工艺。并用该树脂与固化剂、惰性添料配制了胶泥,测试了其常温、热处理及腐蚀后的胶泥的力学性能、腐蚀率及焦化时间。测试结果表明:该树脂胶泥具有优良的耐酸耐碱性能。 相似文献
9.
10.
11.
12.
Organo clay modified alkyd resins were prepared and these modified alkyd resins were cured with different ratios of melamine formaldehyde and urea formaldehyde resins in this work. Alkyds formulated to have oil content 40% were prepared with phthalic anhydride (PA), glycerine (G), coconut oil fatty acid (COFA), dipropylene glycol (DPG) and organo clay. “K alkyd constant system” was used for the formulation calculations of the alkyd resins. Alkyd resins were blended with 40% of a commercial melamine formaldehyde. The films of the alkyd–amino resins were prepared from 60% solid content xylene solutions using 50 μm applicators. After the films were cured at 140 °C for 2 h in an oven, properties of the films were determined. The film properties of the alkyd–amino resins such as drying degree, hardness, adhesion strength, abrasion resistance, water, acid, alkaline, solvent resistance, and resistance to environmental conditions were investigated. The addition of the urea formaldehyde resin and organo clay has positive effect on the physical and chemical resistance of the alkyd–amino resins. 相似文献
13.
14.
RFI工艺用环氧树脂基体研究 总被引:4,自引:2,他引:4
本文通过不同牌号环氧树脂混配来制备树脂膜,考察了其流延性和成膜性,最终选定E-44与CYD-011质量比为1∶1的混配树脂成膜。加入704固化剂后混配树脂浇铸体弯曲强度可达108MPa,拉伸强度74MPa,力学性能优良,成膜性好,符合RFI工艺用树脂基体的要求。 相似文献
15.
16.
赴俄罗斯、乌克兰有机硅技术考察情况介绍(续)章基凯(上海树脂厂上海200335)(上接1997年第5期第22页)3乌克兰硅聚合物生产联合体该联合体规模相当大,是从氯硅烷至聚合物一体化生产的综合厂,创建于1955年。是目前该国开工率最高的厂家。可生产以... 相似文献
17.
18.
介绍了超低聚合度PVC树脂、高表观密度PVC树脂、消光PVC树脂、超高聚合度PVC树脂及高抗冲PVC树脂等几种专用PVC树脂的国内外生产、工艺、产品型号及应用情况。 相似文献
19.
水性聚氨酯改性研究进展 总被引:1,自引:0,他引:1
聚氨酯作为一类具有良好的机械性能高分子材料,在很多范围内得到应用。水性聚氨酯的问世,更是适应了目前化工环保化的趋势。然而水性聚氨酯的耐水、耐溶剂、耐候等方面表现较差。本文介绍了目前国内外水性聚氨酯的研究应用现状,以及水性聚氨酯的几种改性方法:交联改性,互穿网络改性,环氧树脂改性,有机硅改性,多重改性等。同时也指出今后水性聚氨酯改性的发展趋势。 相似文献