Mapping the potential for decentralized energy generation based on renewable energy sources in the Republic of Croatia

There are regions in the Republic of Croatia (underdeveloped, devastated by war, depopulated, as well as islands and mountainous areas) which are still disconnected from the electricity network or where the current network capacity is insufficient. In addition, these regions have good renewable energy potential. Since the decentralized energy generation (DEG) covers a broad range of technologies, including many renewable energy technologies (RET) that provide small-scale power at sites close to the users, this concept could be of interest for these locations. This paper identifies the areas in Croatia where such systems could be applied. Consideration is given to geographical locations as well as possible applications. Wind, hydro, solar photovoltaic, geothermal, and biomass conversion systems were analyzed from a technological and economic point of view. Since the renewable energy sources (RES) data for Croatia are rather scarce, the intention was to give a survey of the present situation and an estimate of future potential for DEG based on RES. The energy potential (given as capacity and energy capability) and production costs were calculated on a regional basis and per type of RET. Finally, the RES cost–supply curves for 2006 and 2010 are given.     

Minimizing the energy cost for microgrids integrated with renewable energy resources and conventional generation using controlled battery energy storage

This paper presents a methodology to minimize the total cost of buying power from different energy producers including renewable energy generations particularly within the context of a microgrid. The proposed idea is primarily based on the controlled operation of a battery energy storage system (BESS) in the presence of practical system constraints coupled with our proposed cost optimization algorithm. The complex optimization problem with constraints has been solved using the well-known concept of dynamic programming. The methodology has been assessed using actual power and price data from six different power generation sites and cost reduction has been calculated for a number of BESSs by varying their energy and power capacities. Twofold benefits of the proposed methodology lie in minimizing the total cost along with the constraint-based efficient operation of the BESS. Simulation results depict that the given power demand at a particular region can be fulfilled properly at all times using a BESS and multiple power generation.     

Electricity generation from renewable energy sources in Poland

AbstractFor the European Union's Member States 2001/77/EC Directive on the promotion of electricity produced from renewable energy sources in the internal electricity market determined targets for 2010 of 21% share of electricity from renewable energy sources in total electricity consumption. Particular Member States adopted different measures for development of renewable and in consequence they achieved different results. Poland, being Member State of the EU since 2004 has accepted target of 7.5% for electricity generated from renewable energy sources until 2010. Currently, in this decade, new 2009/28/EC Directive on the promotion of the use of energy from renewable sources plays significant role in development of renewable energy sources. Directive set new target for 2020. Nowadays is a time for summary and assessment of results fulfilling Directives and monitor progress of new targets. Article presents measures implemented for renewable source energy development, also current state and perspectives of using of renewable energy sources in Poland and in the EU.     

Overview of energy storage systems for storing electricity from renewable energy sources in Saudi Arabia

Renewable power (photovoltaic, solar thermal or wind) is inherently intermittent and fluctuating. If renewable power has to become a major source of base-load dispatchable power, electricity storage systems of multi-MW capacity and multi-hours duration are indispensable. An overview of the advanced energy storage systems to store electrical energy generated by renewable energy sources is presented along with climatic conditions and supply demand situation of power in Saudi Arabia. Based on the review, battery features needed for the storage of electricity generated from renewable energy sources are: low cost, high efficiency, long cycle life, mature technology, withstand high ambient temperatures, large power and energy capacities and environmentally benign. Although there are various commercially available electrical energy storage systems (EESS), no single storage system meets all the requirements for an ideal EESS. Each EESS has a suitable application range.     

A bifunctional electrochemical flow cell integrating ammonia production and electricity generation for renewable energy conversion and storage

Renewable energy has rapidly advanced in the global energy system, triggering the visible development of energy storage technologies in recent decades. Among them, the electricity-fuel-electricity approach is an effective way for the storage and utilization of renewable power. In this work, a bifunctional electrochemical flow cell integrating both ammonia production and electricity generation modes is developed for renewable energy conversion and storage. Ammonia, a hydrogen carrier having a high hydrogen content of 17.6 wt %, is relatively easier to convert to liquid phase for large-scale storage. The long-distance ammonia transport can reliably depend on the established infrastructure. In addition, as a carbon-free fuel beneficial for achieving the goal of carbon-neutrality, ammonia is considered as an environmentally benign and cost-effective mediator fuel. This flow cell is able to operate via two modes, i.e., an ammonia-production mode for energy storage in the form of ammonia (via nitrogen reduction reaction) and an electricity-generation mode for energy conversion in the form of electricity (via ammonia oxidation reaction). This flow cell is constituted by a PtAu/C-coated nickel-foam electrode for nitrogen and oxygen reduction reactions, a Pt/C-coated nickel-foam electrode for water and ammonia oxidation reactions, and an alkaline anion exchange membrane for charge-carrier migration. Charging this flow cell with the supply of nitrogen results in a Faradaic efficiency of 2.70% and an ammonia production rate as high as 9.34 × 10^?10 mol s^?1 cm^?2 at 23 °C. Moreover, energizing this flow cell with ammonia results in an open-circuit voltage of 0.59 V and a peak power density of 3.31 mW cm^?2 at 23 °C. A round-trip efficiency of 25.7% is realized with the constant-electrode mode.     

The renewable energy targets of the Maghreb countries: Impact on electricity supply and conventional power markets

Morocco, Algeria and Tunisia, the three countries of the North African Maghreb region, are showing increased efforts to integrate renewable electricity into their power markets. Like many other countries, they have pronounced renewable energy targets, defining future shares of “green” electricity in their national generation mixes. The individual national targets are relatively varied, reflecting the different availability of renewable resources in each country, but also the different political ambitions for renewable electricity in the Maghreb states. Open questions remain regarding the targets’ economic impact on the power markets. Our article addresses this issue by applying a linear electricity market optimization model to the North African countries. Assuming a competitive, regional electricity market in the Maghreb, the model minimizes dispatch and investment costs and simulates the impact of the renewable energy targets on the conventional generation system until 2025. Special emphasis is put on investment decisions and overall system costs.     

Mathematical modelling of electricity market with renewable energy sources

The paper addresses the electricity market with conventional energy sources on fossil fuel and non-conventional renewable energy sources (RESs) with stochastic operating conditions.A mathematical model of long-run (accounting for development of generation capacities) equilibrium in the market is constructed. The problem of determining optimal parameters providing the maximum social criterion of efficiency is also formulated.The calculations performed have shown that the adequate choice of price cap, environmental tax, subsidies to RESs and consumption tax make it possible to take into account external effects (environmental damage) and to create incentives for investors to construct conventional and renewable energy sources in an optimal (from the society view point) mix.     

Analysis and perspectives of the government programs to promote the renewable electricity generation in Brazil

Government programs to encourage renewable electricity production in Brazil are analyzed in order to evaluate aims and identify problems in the execution of such programs in order to provide ideas to channel them. In terms of methodology, the analysis is based in a chronologic study of the programs, in order to establish whether or not renewable energy policies have been linked. The paper concludes that already-executed programs and those in progress have deficiencies that hinder the achievement of their goals; therefore diversification policies for renewable energy will not be achieved in the foreseen timeframe. Therefore, certain policy changes are proposed.     

Operational performance of energy storage as function of electricity prices for on-grid hybrid renewable energy system by optimized fuzzy logic controller

Realization of benefits from on-grid distributed generation based on renewable energy sources requires employment of energy storage to overcome the intermittency in power generation by such sources, while accounting for time-varying electricity prices. The objective of this study is to examine the effects of time-varying electricity prices on the performance of energy storage components for an on-grid hybrid renewable energy system (HRES) utilizing an optimized fuzzy logic controller (FLC). To achieve the objective, FLC membership functions are optimized for minimizing the operational cost of the HRES based on weekly and daily prediction of data for grid electricity price, electrical load, and environmental parameters, including wind speed, solar irradiation, and ambient temperature, using shuffled frog leap algorithm. FLC three inputs include (a) grid electricity price, (b) net power flow as the difference between energy produced and energy consumed, and (c) state of charge (SOC) of battery stack. It is confirmed that accounting for grid electricity price has considerable effects on the performance of energy storage components for operation of on-grid HRES, as the weekly and daily optimized FLCs result in less working hours for fuel cell and electrolyzer and less fluctuations in SOC of battery stack.     

Emissions from electricity generation in Malaysia

Emissions in the process utilization produce adverse effects on the environment that influence human health, organism growth, climatic changes and so on. The Kyoto protocol, produced by the United Nations Framework Convention on Climate change (UNFCC) in December 1997, prescribed a legally binding greenhouse gas emission target about 5% below their 1990 level. About 160 countries including Malaysia now adopt this protocol. Electricity generation is one of the main contributors to emissions in the country. In order to calculate the potential emissions produced by this activity, the type of fuel use should be identified. Malaysia hopes to gradually change fuel use from 70% gas, 15% coal, 10% hydro, and 5% petroleum in the year 2000 to 40% gas, 30% hydro, 29% coal, and only 1% petroleum by the year 2020. The changes in fuel type have changed the pattern of emission production. This study attempts to predict the pattern of emissions from 2002 to 2020 due to the changes in fuel use. The calculation is based on emissions for unit electricity generated and the percentages of fuel use for electricity generation. The study found that the electricity generation company has produced huge emissions from their power plants in this country.     

Analysis of renewable energy development to power generation in the United States

Renewable energy resources have historically played a small role for electricity generation in the US. However, concerns such as security of energy supply, limitations and price fluctuations of fossil fuels, and threats of climate changes have encouraged US policy makers to think and debate about diversification strategy in the energy supply and promotion of renewables. The current paper discusses the role of renewable portfolio in the US energy action plan during 2010–2030. A system dynamics model is constructed to evaluate different costs of renewable energy utilization by 2030. Results show that while renewables will create a market with near 10 billion $ worth (in the costs level) in 2030, the total value of renewable energy promotion and utilization in the US will be more than 170 billion $(in the costs level) during 2010–2030.     

Role of the GB-France electricity interconnectors in integration of variable renewable generation

The integration of large capacities of wind and solar generation into the France and Great Britain (GB) power systems is expected to pose significant operational challenges. Electricity interconnectors can play a role in facilitating the integration of renewable generation in neighbouring countries by allowing power to flow freely between power systems and therefore smooth the net electricity demand. In this paper, role of the electricity interconnectors in efficient balancing of supply and demand in the France and GB power systems was evaluated in terms of overall reduction in the operational costs and curtailment of renewable generation, and also its impact on operation of gas-fired plants. The value of the France-GB interconnectors was studied for two generation mix scenarios in 2030 using PLEXOS. The outputs of the modelling showed the interconnectors will result in larger amount of wind and solar to be absorbed by both power systems which consequently will reduce overall operational costs and CO₂ emissions. In addition, the interconnectors will reduce burden on gas-fired plants compensating for variation in wind and solar generation. This can have a significant value in operation and required investment of gas networks in both countries.     

Cost-effectiveness of renewable electricity policies

We analyze policies to promote renewable sources of electricity. A portfolio standard (RPS) raises electricity prices and primarily reduces gas-fired generation. A knee of the cost curve exists between 15% and 20% goals for 2020 in our central case, and higher natural gas prices lower the cost of greater reliance on renewables. A renewable energy production tax credit lowers electricity price at the expense of taxpayers, which limits its effectiveness in reducing carbon emissions, and it is less cost-effective at increasing renewables than a portfolio standard. Neither policy is as cost-effective as a cap-and-trade policy for achieving carbon emission reductions.     

Novel method for setting up the relay protection of power systems containing renewable energy sources and hydrogen energy storage systems

Integration of renewable energy sources (RES) together with energy storage systems (ESS) changes processes in electric power systems (EPS) significantly. Specifically, rate of change and the lowest values of operating conditions during the emergencies are got influenced. Such changes can cause incorrect actions of relay protection (RP) as it was designed and adjusted with no regard for influence of RES and ESS. Detailed research on processes during the different normal and abnormal modes in both EPS and primary transducers and also in RP devices should be done to take preventive actions. To do this research mathematical modeling based on detailed and authentic models of all elements including RP should be used. HRTSim (which was developed by authors) software for simulating EPS provides the opportunity to create such models of EPS of any size without simplifications and limits. Using of this instrument together with detailed mathematical models of RP which were developed before provided the opportunity to investigate them rigorously in RES-integrated EPS. Settings providing adequate action of RP in certain conditions were performed as a result of this investigation. Fragments of these investigations are performed in this paper. Results of these investigations would be useful for designing new methods and tools of RP adjustment.     

Export orientation and domestic electricity generation: Effects on energy efficiency innovation in select sectors

Why are some countries developing many energy efficiency innovations, while others are lagging behind? I argue that export orientation and electricity at low variable cost from nuclear and hydropower plants have an interactive effect on energy efficiency innovation. Export-oriented countries have strong incentives to invest in energy efficiency innovation, as they are in a position to export these technology innovations for global markets. But if inexpensive electricity is supplied in a country, the domestic demand for energy efficiency innovation is missing, and so the home market cannot serve as a springboard for international commercialization. I test this theory against international patent data on energy efficiency innovation in insulation, heating, and lighting for 22 OECD countries, 1991–2007. The statistical analysis indicates that export orientation has large positive effects on energy efficiency innovation in countries that do not rely on nuclear and hydroelectricity.     

A hybrid model for the optimum integration of renewable technologies in power generation systems

The main purpose of this work is to assess the unavoidable increase in the cost of electricity of a generation system by the integration of the necessary renewable energy sources for power generation (RES-E) technologies in order for the European Union Member States to achieve their national RES energy target. The optimization model developed uses a genetic algorithm (GA) technique for the calculation of both the additional cost of electricity due to the penetration of RES-E technologies as well as the required RES-E levy in the electricity bills in order to fund this RES-E penetration. Also, the procedure enables the estimation of the optimum feed-in-tariff to be offered to future RES-E systems. Also, the overall cost increase in the electricity sector for the promotion of RES-E technologies, for the period 2010–2020, is analyzed taking into account factors, such as, the fuel avoidance cost, the carbon dioxide emissions avoidance cost, the conventional power system increased operation cost, etc. The overall results indicate that in the case of RES-E investments with internal rate of return (IRR) of 10% the cost of integration is higher, compared to RES-E investments with no profit, (i.e., IRR at 0%) by 0.3–0.5 €c/kWh (in real prices), depending on the RES-E penetration level.     

A review of electrical energy storage technologies for renewable power generation and smart grids

储能技术是突破可再生能源大规模开发利用瓶颈的关键技术,是智能电网的必要组成部分.在储能市场商业化雏形阶段,系统性的比较分析各类储能技术的性能特点,为未来市场发展提供筛选技术路线的框架基础至关重要.本文阐述了储能技术在可再生能源发电和智能电网中的作用,对物理储能(抽水蓄能,压缩空气储能,飞轮储能),电化学储能(二次电池,液流电池),其它化学储能(氢能,合成天然气)等储能技术进行了系统的比较与分析,最后提出储能技术的发展趋势.     

Key challenges to expanding renewable energy

The key advantage of renewables is that they are free of direct pollution and carbon emissions. Given concern over global warming caused by carbon emissions, there are substantial policy efforts to increase renewable penetrations. The purpose of this paper is to outline and evaluate the challenges presented by increasing penetrations of renewable electricity generation. These generation sources primarily include solar and wind which are growing rapidly and are new enough to the grid that the impact of high penetrations is not fully understood. The intrinsic nature of solar and wind power is very likely to present greater system challenges than “conventional” sources. Within limits, those challenges can be overcome, but at a cost. Later sections of the paper will draw on a variety of sources to identify a range of such costs, at least as they are foreseen by researchers helping prepare ambitious plans for grids to obtain high shares (30–50%) of their megawatt hours from primarily solar and wind generation. Energy poverty issues are outlined and related to renewable costs issues.     

Economic potential of renewable energy in Vietnam's power sector

A bottom-up Integrated Resource Planning model is used to examine the economic potential of renewable energy in Vietnam's power sector. In a baseline scenario without renewables, coal provides 44% of electricity generated from 2010 to 2030. The use of renewables could reduce that figure to 39%, as well as decrease the sector's cumulative emission of CO₂ by 8%, SO₂ by 3%, and NO_x by 4%. In addition, renewables could avoid installing 4.4 GW in fossil fuel generating capacity, conserve domestic coal, decrease coal and gases imports, improving energy independence and security. Wind could become cost-competitive assuming high but plausible on fossil fuel prices, if the cost of the technology falls to 900 US$/kW.