High optical transparency, low dielectric constant and light color of novel organosoluble polyamides with bulky alicyclic pendent group

Novel optically transparent, low dielectric and highly organosoluble alicyclic polyamides derived from bulky alicyclic diamine containing trifluoromethyl group on either side, 1,1-bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl]-4-tert-butylcyclohexane (BTFAPBC), were prepared. The polyamides were obtained in almost quantitative yields and showed inherent viscosity values between 0.55 and 0.72 dL g⁻¹ in DMAc solution. Most of the polyamides showed excellent solubility in polar solvents such as N-methyl-2-pyrrolidinone (NMP), N,N′-dimethyl acetamide (DMAc), N,N′-dimethyl formamide (DMF), pyridine, cyclohexanone, γ-butyrolactone and chloroform. The cut-off wavelength for polyamides ranged from 350 to 388 nm. Polyamides with alicyclic tert-butylcyclohexyl cardo and trifluoromethyl substituents exhibited low dielectric constants ranging from 3.29 to 3.98 (at 100 Hz) compared with commercially available polyamides [Amodel^®, 4.2-5.7 at 100 Hz]. Polyamides showed glass transition temperatures in the range of 244-266 °C and possessed a coefficient of thermal expansion (CTE) of 60-75 ppm °C⁻¹. Thermogravimetric analysis data showed that the polyamides were stable up to 430 °C and the 10% weight loss temperature was found to be in the range of 437-466 °C in nitrogen atmosphere. The polyamide films had a tensile strength in the range of 66-103 MPa, elongation at break in the range of 5-8%, and tensile modulus in the range of 1.5-2.2 GPa. Due to their properties, the polyamides could be considered as engineering plastic and photoelectric materials.     

Functional bioengineering copolymers. II. Synthesis and characterization of amphiphilic poly(N-isopropyl acrylamide-co-maleic anhydride) and its macrobranched derivatives

Radical-initiated copolymerization of N-isopropyl acrylamide (NIPA) with maleic anhydride (MA) and macromolecular reactions of synthesized poly(NIPA-co-MA) with polyethyleneglycol (PEG with a methoxy chain end and molecular weight of 2000 g mol⁻¹) and polyethyleneimine (PEI with molecular weight of 2000 g mol⁻¹) have been studied as a way to obtain new reactive amphiphilic water-soluble polymers potentially useful as carriers for gene delivery. Structure, composition and thermal behaviour of synthesized copolymers and their macrobranched architectures are determined by FTIR, ¹H and ¹³C NMR spectroscopy, elemental (N content) and chemical (acid number) analysis and differential scanning calorimetry, differential thermal and thermal gravimetric methods. It is shown that synthesized copolymers with given composition have low critical solution temperature (LCST) in the range of 30.2-46.4 °C at pH values of 4.0-7.4, which suggest the possibility of their biomedical applications.     

A new fast methodology to measure total diene content in gasoline

The rate constants for the quenching of biacetyl phosphorescence by a series of conjugated dienes were measured. 1,3-cyclohexadiene (k_qP = 2.94 × 10⁹ s⁻¹ mol⁻¹ L), 2,5-dimethyl-2,4-hexadiene (k_qP = 1.91 × 10⁹ s⁻¹ mol⁻¹ L), 2,4-dimethyl-1,3-pentadiene (k_qP = 1.78 × 10⁸ s⁻¹ mol⁻¹ L), 3-methyl-1,3-pentadiene (k_qP = 1.22 × 10⁸ s⁻¹ mol⁻¹ L), 2,4-hexadiene (k_qP = 1.35 × 10⁸ s⁻¹ mol⁻¹ L) and trans-2-methyl-1,3-pentadiene (k_qP = 3.84 × 10⁸ s⁻¹ mol⁻¹ L). Cyclooctene also quenched biacetyl phosphorescence but with a lower rate (k_qP = 1.97 × 10⁷ s⁻¹ mol⁻¹ L). Quenching was not observed with 1-methylnaphthalene. Since conjugated dienes quench biacetyl phosphorescence preferentially, this method was studied using gasoline samples with known diene composition. A good correlation was found between the rate of quenching of biacetyl by the gasoline samples and the quantity of conjugated dienes present.     

The ultrasonic electropolymerization of an 5-[o-(4-bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) film electrode and its electrocatalytic properties to dopamine oxidation in aqueous solution

5-[o-(4-Bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) was electropolymerized on a glassy carbon electrode (GCE), and the electrocatalytic properties of the prepared film electrode response to dopamine (DA) oxidation were investigated. A stable o-BrPETPP film was formed on the GCE under ultrasonic irradiation through a potentiodynamic process in 0.1 M H₂SO₄ between −1.1 V and 2.2 V versus a saturated calomel electrode (SCE) at a scan rate of 0.1 V s⁻¹. The film electrode showed high selectivity for DA in the presence of ascorbic acid (AA) and uric acid (UA), and a 6-fold greater sensitivity to DA than that of the bare GCE. In the 0.05 mol L⁻¹ phosphate buffer (pH 6.0), there was a linear relationship between the oxidation current and the concentration of DA solution in the range of 5 × 10⁻⁷ mol L⁻¹ to 3 × 10⁻⁵ mol L⁻¹. The electrode had a detection limit of 6.0 × 10⁻⁸ mol L⁻¹(S/N = 3) when the differential pulse voltammetric (DPV) method was used. In addition, the charge transfer rate constant k = 0.0703 cm s⁻¹, the transfer coefficient α = 0.709, the electron number involved in the rate determining step n_α = 0.952, and the diffusion coefficient D_o = 3.54  10⁻⁵ cm² s⁻¹ were determined. The o-BrPETPP film electrode provides high stability, sensitivity, and selectivity for DA oxidation.     

Synthesis and aqueous solution characterization of amphiphilic diblock copolymers containing carbazole

A series of near-monodisperse diblock copolymers of 2-(N-carbazolyl)ethyl methacrylate and 2-(dimethylamino)ethyl methacrylate (DMAEMA) of relatively low molecular weights (2600-24,000 g mol⁻¹) were synthesized by group transfer polymerization using tetrahydrofuran (THF) as a solvent. The molecular weight distributions and compositions of all the copolymers were obtained using gel permeation chromatography (GPC) in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy, respectively. Differential scanning calorimetry and thermal gravimetric analysis provided low glass transition temperatures (T_gs) of about 60 °C and decomposition temperatures between 320 and 450 °C for the copolymers, respectively. The three copolymers with the highest DMAEMA content were water-soluble below pH 7. Aqueous GPC at pH 3 showed that the water-soluble block copolymers formed micelles with apparent number average molecular weights above 100,000 g mol⁻¹.     

Thermal stability of gelatin gels: Effect of preparation conditions on the activation energy barrier to melting

10, 20, and 40 wt.% aqueous gelatin gels were prepared under isothermal (annealing at 15, 20, and 25 °C for 15 to 120 min) and nonisothermal (cooling at 1 °C min⁻¹) conditions. Isoconversional kinetic analysis of DSC data on gel melting (gel-sol transition) of all types of gels revealed significant variations in the activation energy throughout the process. Activation energy barrier to melting of isothermally prepared gels was in the range 160-190 kJ mol⁻¹ and found to increase with increasing the annealing temperature that was the major effect discovered. Activation energy barrier to melting of nonisothermally prepared gels was determined to be around 120-140 kJ mol⁻¹ and increase with increasing the concentration. Local reversibility of the gel melting was demonstrated by using temperature modulated DSC.     

A glassy carbon supported bilayer lipid-like membrane of 5,5-ditetradecyl-2-(2-trimethyl-ammonioethyl)-1,3-dioxane bromide for electrochemical sensing of epinephrine

A self-assembled bilayer lipid-like membrane (BLM) supported on glassy carbon electrode (GCE) was fabricated using 5,5-ditetradecyl-2-(2-trimethyl-ammonioethyl)-1,3-dioxane bromide (DTDB) for epinephrine (EP) determination in the presence of ascorbic acid (AA). This modified electrode (DTDB/GCE) has strong membrane adsorption accumulation and electrocatalytic ability toward EP and AA. The oxidation of EP was controlled by double step adsorption accumulation process of the DTDB-BLM. The parameters of fitted Langmuir isotherm Γ_max, B_ADS, and ΔG_ADS values were determined as 1.0×10⁻¹¹ mol cm⁻², 2.04×10⁶ dm³ mol⁻¹, and −45.17 kJ mol⁻¹ for the fist step for EP concentration less than 1 mM, and 4.92×10⁻¹¹ mol cm⁻², 7.35×10⁴ dm³ mol⁻¹, and −37.1 kJ mol⁻¹ for the second step for EP concentration higher than 1 μM. The DPV peaks for EP and AA oxidations were appeared at 0.220 and 0.085 V versus SCE, respectively, allowing the determination of EP in the presence of high concentration of AA. The advantage of DTDB-BLM was demonstrated experimentally in comparison with other three BLMs, and attributed to the dioxane group as well as the suitable length of the carbon chain of DTDB molecule. The current response of the DTDB/GCE was fast and reproducible, suitable for the electrochemical sensing in flow-injection systems. A linear range of 1×10⁻⁸ to 1×10⁻⁴ M EP was preliminary obtained using a simple setup.     

Free-radical propagation and termination kinetics of the butyl acrylate dimer studied by pulsed laser polymerization techniques

The propagation and termination rate coefficients for bulk polymerization of the butyl acrylate dimer (BA dimer) are determined by pulsed laser techniques. The rate coefficient for propagation, k_p, is deduced for temperatures from 20 to 90 °C via the pulsed laser polymerization-size exclusion chromatography (PLP-SEC) method at pulse repetition rates between 1 and 10 Hz. The Arrhenius parameters were found to be: E_A(k_p) = (34.2 ± 1.0) kJ mol⁻¹ and A(k_p)/L mol⁻¹ s⁻¹ = (1.08 ± 0.49) × 10⁷ L mol⁻¹ s⁻¹. The termination rate coefficient, k_t, has been measured via SP-PLP-ESR, single pulse-pulsed laser polymerization in conjunction with time-resolved electron spin resonance detection of radical concentration. The resulting Arrhenius parameters as deduced from the temperature range −15 to +30 °C are: E_A(〈k_t〉) = (22.8 ± 3.7) kJ mol⁻¹ and log(A/L mol⁻¹ s⁻¹) = 10.6 ± 1. The chain-length dependence of k_t was studied at 30 °C. For short chains a significant dependence was found which may be represented by an exponent α = 0.79 in the power-law expression k_t(i) = k_t⁰i^−α.     

Knowledge of petroleum heavy residue potential as feedstock in refining process using thermogravimetry

In the petroleum industry, previous knowledge of the feedstock's potential to produce light material is an important aspect of refining. For the evaluation of heavy petroleum fractions, thermogravimetry (TG), a thermal analysis technique, is considered a good analytical tool to determine the thermal behavior of these fractions at high temperatures. In the present work, TG analyses were made of petroleum distillation residues from different Brazilian oils. The apparent cracking activation energy of saturates, aromatics, resins and asphaltenes was also determined by TG. Saturates and aromatics showed values of 80-120 kJmol^− 1 at low conversions (< 0.3) and of 120-220 kJ mol^− 1 at high conversions (> 0.3). The thermal cracking activation energy of resins and asphaltenes occurred between 220-300 kJ mol^− 1, i.e., at higher values than those of aromatic and saturated fractions. This paper discusses the prediction of carbonaceous residue based on thermal analysis.     

Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending

Poly(l-lactide) (i.e. poly(l-lactic acid) (PLLA)) and poly(d-lactide) (i.e. poly(d-lactic acid) (PDLA)) and their equimolar enantiomeric blend (PLLA/PDLA) films were prepared and the effects of enantiomeric polymer blending on the thermal stability and degradation of the films were investigated isothermally and non-isothermally under nitrogen gas using thermogravimetry (TG). The enantiomeric polymer blending was found to successfully enhance the thermal stability of the PLLA/PDLA film compared with those of the pure PLLA and PDLA films. The activation energies for thermal degradation (ΔE_td) were evaluated at different weight loss values from TG data using the procedure recommended by MacCallum et al. The ΔE_td values of the PLLA/PDLA, PLLA, and PDLA films were in the range of 205-297, 77-132, and 155-242 kJ mol⁻¹ when they were evaluated at weight loss values of 25-90% and the ΔE_td value of the PLLA/PDLA film was higher by 82-110 kJ mol⁻¹ than the averaged ΔE_td value of the PLLA and PDLA films. The mechanism for the enhanced thermal stability of the PLLA/PDLA film is discussed.     

Hydrogenated hydroxy-functionalized polyisoprene (H-HTPI) and isocyanurate of isophorone diisocyanates (I-IPDI): reaction kinetics study using FTIR spectroscopy

The reaction between a hydrogenated hydroxyl-functionalized polyisoprene (H-HTPI) and isophorone diisocyanate isocyanurate (I-IPDI) is followed by using direct FTIR spectroscopy. The reaction kinetics is studied using a simple model taking into consideration the I-IPDI structure. The rates of individual isocyanate groups are described by a second order equation. Influence of dibutyltin dilaurate (DBTL) concentration and temperature on selectivity, defined as the ratio between the rate constant of secondary isocyanate group and the rate constant of the primary isocyanate group, is investigated. It is observed that selectivity decreases when temperature or DBTL concentration increases. Eyring parameters are determined for the catalyzed [ΔH^*=77/35 (kJ mol⁻¹), ΔS^*=12/−100 (J mol⁻¹ K⁻¹)] and uncatalyzed reactions [ΔH^*=48/43 (kJ mol⁻¹), ΔS^*=−179/−167 (J mol⁻¹ K⁻¹)] primary and secondary isocyanate groups being differentiated.     

Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries

In this study, we prepare a kind of solid polymer electrolyte (SPE) based on N-ethyl-N′-methyl imidazolium tetrafluoroborate (EMIBF₄), LiBF₄ and poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-HFP)] copolymer. The resultant SPE displays high thermal stability above 300 °C and high room temperature ionic conductivity near to 10⁻³ S cm⁻¹. Its electrochemical properties are improved with incorporation of a zwitterionic salt 1-(1-methyl-3-imidazolium)propane-3-sulfonate (MIm3S). When the SPE contains 1.0 wt% of the MIm3S, it has a high ionic conductivity of 1.57 × 10⁻³ S cm⁻¹ at room temperature, the maximum lithium ions transference number of 0.36 and the minimum apparent activation energy for ions transportation of 30.9 kJ mol⁻¹. The charge-discharge performance of a Li₄Ti₅O₁₂/SPE/LiCoO₂ cell indicates the potential application of the as-prepared SPE in lithium ion batteries.     

The non-isothermal kinetics analysis of the thermal decomposition of kaolinite by Effluent Gas Analysis technique

The thermal decomposition of kaolin with high-content of the medium ordered kaolinite was studied by Effluent Gas Analysis (EGA) under non-isothermal conditions. This technique enables to distinguish two overlaying processes during the thermal decomposition of kaolin: oxidation of organic compounds and dehydroxylation. The kinetic of non-isothermal dehydroxylation of kaolinite is controlled by the rate of the third-order reaction. For the given reaction mechanism, the overall activation energy (E_A) and pre-exponential (frequency) factor (A) values are 242 kJ mol⁻¹ and 2.21 × 10⁸ s⁻¹, respectively.     

Subaquatic oxidation of coal by water-dissolved oxygen

Subaquatic oxidation of two bituminous coals by water-dissolved oxygen was investigated using batch reactor equipped with membrane oxygen sensor. Effects of time, temperature and coal grain size were studied as basic parameters influencing the oxidation process. Obtained results showed the subaquatic coal oxidation can be considered as interaction of the first reaction order with respect to oxygen. From temperature dependence of oxidation rate, activation energies E = 72 ± 4 kJ mol⁻¹ and/or 50 ± 4 kJ mol⁻¹ were calculated. For the samples, oxygen consumption R_O2 was found to be in the range of 2 × 10⁻⁷ mol O₂ kg⁻¹ s⁻¹ to 6 × 10⁻⁷ mol O₂ kg⁻¹ s⁻¹, such values being quite comparable with R_O2 for aerial oxidation of bituminous coals.     

Determination of cyclodextrin inclusion constant for aromatic carbonyl compounds through spectrophotometric and electrochemical methods

α- and β-Cyclodextrins cavity inclusion constants (K_i) were determined for a series of benzaldehydes and acetophenones by using two different methods: Benesi-Hildebrand (BH) UV/vis spectroscopic method and electrochemical current (EC) method, determined by cyclic voltammetry. The values determined in the group of benzaldehydes varied from 322 ± 27 to 5688 ± 317 mol⁻¹ dm³ for UV/vis method, and 342 ± 19 to 7386 ± 142 mol⁻¹ dm³ for EC method. The values determined in the group of acetophenones varied from 2201 ± 88 to 9125 ± 251 mol⁻¹ dm³ for UV/vis method, and 1473 ± 33 to 7555 ± 187 mol⁻¹ dm³ for EC method. The equilibrium time estimated for UV/vis spectroscopic (BH) method was 240 min and for the cyclic voltammetry (EC) method was 310 min. Notably, despite their limitations, both methods were suitable and reliable for inclusion constant measurement, if the equilibrium time of the system is well established.     

Thermodynamics,kinetics, and isotherms studies for gold(III) adsorption using silica functionalized by diethylenetriaminemethylenephosphonic acid

A novel hybrid material silica gel chemically modified by diethylenetriaminemethylenephosphonic acid GH-D-P has been developed and characterized. The results of the adsorption thermodynamics and kinetics of the as-synthesized GH-D-P for Au(III) showed that this high efficient inorganic–organic hybrid adsorbent had good adsorption capacity for Au(III), and the best interpretation for the experimental data was given by the Langmuir isotherm equation, the maximum adsorption capacity for Au(III) is 357.14 mg/g at 35 °C. Moreover, the study indicated the adsorption kinetics of GH-D-P could be modeled by the pseudo-second-order rate equation wonderfully, and the adsorption thermodynamic parameters ΔG, ΔH and ΔS were −20.43 kJ mol⁻¹, 9.17 kJ mol⁻¹, and 96.24 J K⁻¹ mol⁻¹, respectively. Therefore, the high adsorption capacity make this hybrid material have significant potential for Au(III) uptake from aqueous solutions using adsorption method.     

Fabrication of Fc-SWNTs modified glassy carbon electrode for selective and sensitive determination of dopamine in the presence of AA and UA

The electrochemistry of dopamine (DA) was investigated by cyclic voltammetry (CV) and differential pulse voltammograms (DPV) at a glassy carbon electrode modified by the hybridization adducts of Fc-SWNTs. The electro-oxidation of DA could be catalyzed by Fc/Fc⁺ couple as a mediator and had a higher electrochemical response due to the unique carbon surface of carbon nanotubes. The anodic peaks of DA, ascorbic acid (AA) and uric acid (UA) in their mixture can be well separated by the prepared electrode. Under optimum conditions linear calibration graphs were obtained over the DA concentration range 5.0 × 10⁻⁶ to 3.0 × 10⁻⁵ M with a correlation coefficient of 0.9998 and a detection limit of 5.0 × 10⁻⁸ M based on the equation C_m = 3s_b1/m. The modified electrode has been successfully applied for the assay of DA in human blood serum. This work provides a simple and easy approach to selectively detect DA in the presence of AA and UA.     

Electrochemical characteristics of dopamine oxidation at palladium hexacyanoferrate film, electroless plated on aluminum electrode

A novel electrode material was obtained at an aluminum electrode (Al) by a simple electroless method including two consecutive procedures: (i) the electroless deposition of metallic palladium on the Al electrode surface from PdCl₂ + 25% ammonia solution and (ii) the chemical transformation of deposited palladium to the palladium hexacyanoferrate (PdHCF) films in a solution containing 0.5 M K₃[Fe(CN)₆]. The modified Al electrode demonstrated a well-behaved redox couple due to the redox reaction of the PdHCF film. The PdHCF film showed an excellent electrocatalytic activity toward the oxidation of dopamine (DA). The effect of solution pH on the voltammetric response of DA has been investigated. A linear calibration graph was obtained over the DA concentration range 2-51 mM. The rate constant k and transfer coefficient α for the catalytic reaction and the diffusion coefficient of DA in the solution D, were found to be 4.67 × 10² M⁻¹ s⁻¹, 0.63 and 2.5 × 10⁻⁶ cm² s⁻¹, respectively. The interference of ascorbic acid was investigated and greatly reduced using a thin film of Nafion on the modified electrode. The modified electrode indicated reproducible behavior and a high level stability during electrochemical experiments, making it particularly suitable for the analytical purposes.     

Simultaneous voltammetric determination of ascorbic acid, dopamine and uric acid by methylene blue adsorbed on a phosphorylated zirconia-silica composite electrode

This paper describes the preparation, characterization and application of a composite electrode based on methylene blue adsorption to phosphorylated zirconia-silica mixed oxide particles prepared by a sol-gel process. This electrode electrocatalytically oxidizes ascorbic acid (AA), dopamine (DA) and uric acid (UA), allowing their simultaneous voltammetric detection. Well-defined and -separated oxidation peaks were observed by differential pulse voltammetry in a 0.35 mol l⁻¹ Tris-HCl buffer solution (pH 7.4) containing 0.5 mol l⁻¹ KCl. The anodic peak currents observed at −74, 94 and 181 mV increased with increasing concentrations of AA, DA and UA, respectively. Linear calibration plots were obtained over the range of 100-1600 μmol l⁻¹ for ascorbic acid, 6-100 μmol l⁻¹ for dopamine and 22-350 μmol l⁻¹ for uric acid with detection limits of 8.3 ± 0.1, 1.7 ± 0.1 and 3.7 ± 0.2 μmol l⁻¹, respectively. DA and UA concentrations could also be determined under conditions of excess AA (1 mmol l⁻¹).     

Removal of Zn(II) from aqueous solution with natural Chinese loess: Behaviors and affecting factors

The Chinese loess was proved a promising adsorbent for Zn(II) removal from aqueous solution with adsorption capacities at 70.2-83.2 mg g^− 1 at 15-45 °C. Batch tests were conducted to evaluate the factors affecting the removal efficiency, of which the pH, temperature and initial Zn concentration all found in positive relevance to the increase of Zn(II) removal efficiency except for the slurry concentration. The uptake of Zn(II) on Chinese loess was considered as ion-exchange adsorption based on the calculated adsorption energy at − 12.8 to − 16.18 kJ mol^− 1 by D-R isothermal adsorption model. The adsorption kinetics follows the pseudo-second-order kinetics and the equilibrating duration was found to be > 24 h. Thermodynamic investigation shows that the enthalpy and entropy changes during adsorption are in the range of 18.27-47.83 kJ mol^− 1 and 52.7-129.6 J mol^− 1 K^− 1, respectively. The predicted Gibb's free energies were in the range of − 5.97-3.09 kJ mol^− 1, indicating that the adsorption was in favor of higher temperature and lower initial Zn(II) concentration. The optimal Zn(II) removal efficiency could be obtained under the following conditions: low or intermediate Zn(II) concentration, long reaction time, high temperature and initial pH > 3.0.