Preparation of PET/LDH composite materials and their mechanical properties and permeability for O2

The terephthalate‐intercalated LDHs (TA‐LDHs) are used to improve the barrier properties of poly(ethylene terephthalate) (PET) for their application in liquid food packaging. First, TA‐LDHs were synthesized from freshly prepared metal hydroxides. PET/LDH nanocomposites were then prepared by a masterbatch process. The structures and morphologies of TA‐LDHs and PET/LDH nanocomposites were characterized using X‐ray diffractometer, transmission electronic microscopy, and scanning electron microscope. The mechanical performances and the oxygen permeability of the PET/LDH composites were measured using a precision universal tester and differential pressure gas permeameter, respectively. The influence of TA‐LDH content on their structures and properties was studied. PET/LDH nanocomposites with 1 and 2 wt% of TA‐LDHs are partially exfoliated nanocomposites, while PET/LDH with 5 wt% of TA‐LDHs is an intercalated nanocomposite. The PET/LDH nanocomposites prepared by a masterbatch process show better mechanical properties and gas barrier properties. PET/LDHs‐m2 with 2 wt% of TA‐LDHs could offer up to a 29.4% improvement in tensile strength over PET and the Young's modulus is increased by 38.9%. The O₂ permeation of PET/LDHs‐m2 with 2 wt% of TA‐LDHs is decreased by 46.2%. POLYM. ENG. SCI., 59:E366–E371, 2019. © 2019 Society of Plastics Engineers     

In situ microwave‐assisted polymerization of polyethylene terephtalate in layered double hydroxides

The synthesis of poly(ethylene terephthalate) (PET)/layered double hydroxide (LDH) nanocomposites through microwave methods has been investigated. To enhance the compatibility between the PET polymer and the LDH, dodecyl sulfate was intercalated in the lamellar structure. The organo‐LDH structure was confirmed by powder X‐ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR). PET nanocomposites were prepared with 0–10 wt % of LDH content by in situ microwave‐assisted polymerization. PXRD was used to detect the formation of the exfoliated PET/LDH nanocomposites. Transmission electron microscopy was used to observe the dispersed layers and to confirm the exfoliation process. FTIR spectroscopy confirmed that the polymerization process had occurred. TG and DTA are used to study changes in thermal stability of the nanocomposites, which resulted enhanced by well dispersed LDHs layers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ethylene vinyl acetate/Mg‐Al LDH nanocomposites by solution blending

Partially exfoliated ethylene vinyl acetate (EVA‐40, 40% vinyl acetate content)/layered double hydroxide (LDH) nanocomposites using organically modified layered double hydroxide (DS‐LDH) have been synthesized by solution intercalation method. X‐ray diffraction (XRD) and transmission electron microscopy (TEM) studies of nanocomposites shows the formation of exfoliated LDH nanolayers in EVA‐40 matrix at lower DS‐LDH contents and partially intercalated/exfoliated EVA‐40/MgAl LDH nanocomposites at higher DS‐LDH contents. These EVA‐40/MgAl LDH nanocomposites demonstrate a significant improvement in tensile strength and elongation at break for 3 wt% of DS‐LDH filler loading compare to neat EVA‐40 matrix. Thermogravimetric analysis also shows that the thermal stability of the nanocomposites increases with DS‐LDH content in EVA‐40. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Rubber/LDH nanocomposites by solution blending

The rubber nanocomposites containing ethylene vinyl acetate (EVA) having 60 wt % of vinyl acetate content and organomodified layered double hydroxide (DS‐LDH) as nanofiller have been prepared by solution intercalation method and characterized. The XRD and TEM analysis demonstrate the formation of completely exfoliated EVA/DS‐LDH nanocomposites for 1 wt % filler loading followed by partially exfoliated structure for 5–8 wt % of DS‐LDH content. EVA/DS‐LDH nanocomposites show improved mechanical properties such as tensile strength (TS) and elongation at break (EB) in comparison with neat EVA. The maximum value of TS (5.1 MPa) is noted for 3 wt % of DS‐LDH content with respect to TS value of pure EVA (2.6 MPa). The data from thermogravimetric analysis show the improvement in thermal stability of the nanocomposites by ≈15°C with respect to neat EVA. Limiting oxygen index measurements show that the nanocomposites act as good flame retardant materials. Swelling property analysis shows improved solvent resistance behavior of the nanocomposites (1, 3, and 5 wt % DS‐LDH content) compared with neat EVA‐60. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and flame retardancy of polystyrene nanocomposites based on layered double hydroxides

Various layered double hydroxides (LDHs), including MgAl, CoAl, NiAl, and ZnAl‐LDHs, were synthesized and modified using sodium dodecyl benzene sulfonate. Nonhalogen flame‐retardant PS/LDHs nanocomposites were prepared via melt mixing method. The structure of PS/LDHs nanocomposites was investigated by Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) pattern technique, and scanning electronic microscope. Results from XRD indicated that intercalated/exfoliated structure was achieved in the polystyrene matrix. Dynamic mechanical thermal analysis suggested that the storage modulus and T _g for the PS/LDHs nanocomposites was efficiently improved. Thermal and flammability properties of PS nanocomposites were investigated using thermogravimetry and cone calorimetry. Thermal analysis was evaluated and the prepared nanocomposites showed slightly lower thermal stability probably due to the presence of LDH, which starts to decompose at a lower temperature. Compared with neat PS, the peak heat release rate of PS/MgAl and PS/ZnAl‐LDHs nanocomposites filled with 5 wt% LDHs is reduced by 7% and 12%, respectively. Among all LDHs, MgAl, and ZnAl‐LDHs had a better smoke suppression effect with a reduction of peak smoke production rate and CO release rate of 37% and 44%, respectively. POLYM. COMPOS., 38:1680–1688, 2017. © 2015 Society of Plastics Engineers     

Effects of an intercalating agent on the morphology and thermal and flame‐retardant properties of low‐density polyethylene/layered double hydroxide nanocomposites prepared by melt intercalation

The effects of an intercalating agent on the morphology and thermal and flame‐retardant properties of low‐density polyethylene (LDPE)/layered double hydroxide (LDH) nanocomposites were studied with Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, microscale combustion calorimetry, thermogravimetric analysis, and mechanical property measurements. X‐ray diffraction and transmission electron microscopy demonstrated that after intercalation with stearate anion (SA) or dodecyl sulfate anion (DS), organo‐LDH could be nanodispersed in an LDPE matrix with exfoliated structures or intercalated structures simultaneously with partially exfoliated structures, respectively, via melt intercalation. However, the unmodified LDH composites yielded only microcomposites. Microscale combustion calorimetry, thermogravimetric analysis, and dynamic Fourier transform infrared spectra showed the following order for the flame‐retardant and thermal properties: LDPE/SA‐modified LDH > LDPE/DS‐modified LDH > LDPE/NO₃‐modified LDH > LDPE. The higher performance of the LDPE/LDH nanocomposites with respect to flame retardance and thermal stability could be attributed to the better dispersion state of the LDH layers in the LDPE matrix and the greater hindrance effect of LDH layers on the diffusion of oxygen and volatile products throughout the composite materials when they were exposed to burning or thermal degradation. The tensile strength and elongation at break of the LDPE/LDH nanocomposites decreased to some extent because of the decrease in the crystallinity of the LDPE matrix. A transmittance test showed that the transparency of the exfoliated LDPE/SA‐modified LDH nanocomposite was very close to that of neat LDPE. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of exfoliated layered double hydroxide/silicone rubber nanocomposites

Silicone rubber (SR)/Mg–Al layered double hydroxide (LDH) nanocomposites were prepared by the solution intercalation of SR crosslinked by a platinum‐catalyzed hydrosilylation reaction into the galleries of dodecyl sulfate intercalated layered double hydroxide (DS–LDH). X‐ray diffraction and transmission electron microscopy analysis showed the formation of exfoliated structures of organomodified LDH layers in the SR matrix. The tensile strength and elongation at break of SR/DS–LDH (5 wt %) were maximally improved by 53 and 38%, respectively, in comparison with those of the neat polymer. Thermogravimetric analysis indicated that the thermal degradation temperature of the exfoliated SR/DS–LDH (1 wt %) nanocomposites at 50% weight loss was 20°C higher than that of pure SR. Differential scanning calorimetry analysis data confirmed that the melting temperature of the nanocomposites increased at lower filler loadings (1, 3, and 5 wt %), whereas it decreased at a higher filler loading (8 wt %). The relative improvements in the solvent‐uptake resistance behavior of the SR/DS–LDH nanocomposites were also observed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of polyurethane/Mg‐Al layered double hydroxide nanocomposites

Layered double hydroxide (LDH) is a new type of nanofiller, which improves the physicochemical properties of the polymer matrix. In this study, 1, 3, 5, and 8 wt % of dodecyl sulfate‐intercalated LDH (DS‐LDH) has been used as nanofiller to prepare a series of thermoplastic polyurethane (PU) nanocomposites by solution intercalation method. PU/DS‐LDH composites so formed have been characterized by X‐ray diffraction and transmission electron microscopy analysis which show that the DS‐LDH layers are exfoliated at lower filler (1 and 3 wt %) loading followed by intercalation at higher filler (8 wt %) loading. Mechanical properties of the nanocomposite with 3 wt % of DS‐LDH content shows 67% improvement in tensile strength compared to pristine PU, which has been correlated in terms of fracture behavior of the nanocomposites using scanning electron microscope analysis. Thermogravimetric analysis shows that the thermal stability of the nanocomposite with 3 wt % DS‐LDH content is ≈ 29°C higher than neat PU. Limiting oxygen index of the nanocomposites is also improved from 19 to 23% in neat PU and PU/8 wt% DS‐LDH nanocomposites, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of ethylene vinyl acetate/Mg–Al layered double hydroxide nanocomposites

Mg–Al layered double hydroxide (LDH)/Ethylene vinyl acetate (EVA‐28) nanocomposites were prepared through solution intercalation method using organically modified layered double hydroxide (DS‐LDH). DS‐LDH was made by the intercalation of sodium dodecyl sulfate (SDS) ion. The structure of DS‐LDH and its nanocomposites with EVA‐28 was determined by X‐ray diffraction (XRD) and transmission electron microscope (TEM) analysis. XRD analysis shows that the original peak of DS‐LDH shifted to lower 2θ range and supports the formation of intercalated nanocomposites while, TEM micrograph shows the presence of partially exfoliated LDH nanolayers in addition to orderly stacked LDH crystallites in the polymer matrix. The presence of LDH in the nanocomposites has been confirmed by Fourier transform infrared (FTIR) analysis. The mechanical properties show significant improvement for the nanocomposite with respect to neat EVA‐28. Thermogravimetric (TGA) analysis shows that thermal stability of the nanocomposites is higher than that of EVA‐28. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1845–1851, 2007     

The disorderly exfoliated LDHs/PMMA nanocomposite synthesized by in situ bulk polymerization

A new nanocomposite—disorderly exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA)—was prepared by a two-stage process with an in situ bulk polymerization of methyl methacrylate (MMA) in the presence of 10-undecenoate intercalated LDH (LDH-U). The LDH-U was prepared using the co-precipitation method. The structural and compositional details of the LDH-U were determined by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), ²⁷Al and ¹³C magic-angle spinning nuclear magnetic resonance (²⁷Al and ¹³C MAS NMR), elemental analysis (EA), inductively coupled plasma-mass (ICP) and transmission electron microscopy (TEM). During the preparation of LDHs/PMMA nanocomposite, XRD and TEM were also employed to monitor the formation of the exfoliated LDHs/PMMA nanocomposite and the dispersion behavior of the LDH layers, respectively. The pre-polymerization process exfoliates LDH layers within pre-polymer, according to the XRD and TEM results. Additionally, the LDHs/PMMA nanocomposite contained 5 wt% LDH-U, indicating that the LDH layers were well exfoliated and dispersed in the PMMA matrix in a disordered fashion.     

Exfoliation and dispersion of micrometer-sized LDH particles in poly(ethylene terephthalate) and their nanocomposite thermal stability

Effect of surface modification on exfoliation and dispersion of micrometer-sized layered double hydroxide (LDH) in poly(ethylene terephthalate) (PET) and the thermal stability of the resultant PET/LDH nanocomposites or composite have been studied. First, large micrometer-sized LDH with carbonate anions was prepared by urea hydrolysis method. Then, various anions including nitrate (NO₃⁻), dodecyl sulfate (DS⁻) or dodecyl benzene sulphonate (DBS⁻) were intercalated into the interlayer space via anion exchange reaction. By solution intercalation process, PET/LDH_DS and PET/LDH_DBS nanocomposites were successfully obtained, while the LDH_NO₃ could not be exfoliated enough in the PET matrix. Finally, the thermal stabilities of the PET/LDH nanocomposites or composite were investigated.     

Preparation and properties of LDHs/epoxy nanocomposites

Layered double hydroxides (LDHs)/epoxy nanocomposites were prepared by mixing the amino laurate intercalated LDHs, EPON 828 resin, and Jeffamine D400 as a curing agent. The organo-modified LDHs with hydrophobic property easily disperse in epoxy resin, and the amino laurate intercalated LDHs with large gallery space allow the epoxy molecules and the curing agents to easily diffuse into the LDHs galleries at elevated temperature. After the thermal curing process, the exfoliated LDHs/epoxy nanocomposites were formed. X-ray diffraction was used to detect the formation process of the exfoliated LDHs/epoxy nanocomposites. TEM was used to observe the dispersed behavior of the LDHs nanolayers, and the LDHs nanolayers were exfoliated and well dispersed in these nanocomposites. Owing to the reaction between the amine groups of the intercalated amino laurate and epoxy groups, the adhesion between the LDHs nanolayers and epoxy molecules makes these LDHs/epoxy nanocomposites more compatible. Consequently, the tensile properties from tensile test and the mechanical properties from DMA were enhanced, and the T_g of these nanocomposites from DMA and TMA were increased. Coefficients of thermal expansion (CTEs, below and above T_g) of these nanocomposites from TMA decreased with the LDHs content. The thermal stability of these nanocomposites was enhanced by the well dispersed LDHs nanolayers.     

Preparation and characterization of polyimide/modified layered double hydroxide nanocomposites

Polyimide (PI)/modified layered double hydroxide (m‐LDH) nanocomposites were prepared in this study. For this work, m‐LDHs were prepared from layered double hydroxides (LDHs) through an anionic exchange reaction with pyromellitic dianhydride (PMDA), succinic acid or terephthalic acid. PMDA and 4,4′‐oxydianiline were used to make the poly(amic acid) precursor for PI. X‐ray diffraction and transmission electron microscopy measurements confirmed that the PMDA‐modified LDH (PMH) and terephthalic acid‐modified LDH (TMH) were well dispersed in the PI matrix. For the succinic acid‐modified LDH, some of the LDH was intercalated with the succinic acid molecules but most maintained its original structure. Thus, the PI/PMH and PI/TMH nanocomposites exhibited improved mechanical, thermal and electrical properties compared to pure PI. The PMH has aromatic groups and is expected to have better π–π interactions with the PI chains than the other m‐LDHs. Thus, the PI/PMH nanocomposites exhibited the best properties among the nanocomposites investigated. Copyright © 2010 Society of Chemical Industry     

Preparation and properties of LDHs/polyimide nanocomposites

Layered double hydroxides/polyimide (LDHs/PI) nanocomposites were prepared from solution of polyamic acid (polyimide precursor) and LDH-amino benzoate using N,N-dimethylacetamide as a solvent. LDH-amino benzoate (LDH-AB) was obtained by coprecipitation method. The amino benzoate, grafted on the surface of the Mg/Al nanolayers, as a connector improved the compatibility between the inorganic Mg/Al nanolayers and the organic polyimide molecules. The dispersion behavior of Mg/Al nanolayers was investigated by transmission electron microscopy and X-ray diffraction, indicating that the Mg/Al nanolayers were exfoliated in PI matrix to form LDH-AB/PI nanocomposites. The maximum tensile strength and elongation of the LDH-AB/PI nanocomposites were found with the LDH-AB content of 5 and 4 wt%, respectively. The initial tensile modulus of these nanocomposites was increased with the LDH-AB content. These nanocomposites exhibited higher storage and loss moduli compared to those of pure PI. T_g of these nanocomposites increased with the LDH-AB content. Coefficients of thermal expansion (CTE, below and above T_g) of these nanocomposites deceased with the LDH-AB content. The thermal properties of these nanocomposites were enhanced by the incorporation of Mg/Al nanolayers in PI matrix.     

Ethylene vinyl acetate/ethylene propylene diene terpolymer‐blend‐layered double hydroxide nanocomposites

Ethylene vinyl acetate (EVA‐45)/ethylene propylene diene terpolymer (EPDM) blend‐layered double hydroxide (LDH) nanocomposites have been prepared by solution blending of 1:1 weight ratio of EVA and EPDM with varying amounts of organo LDH (DS‐LDH). X‐ray diffraction and transmission electron microscopy analysis suggest the formation of partially exfoliated EVA/EPDM/DS‐LDH nanocomposites. Measurement of mechanical properties of the nanocomposites (3 wt% DS‐LDH content) show that the improvement in tensile strength and elongation at break are 35 and 12% higher than neat EVA/EPDM blends. Dynamic mechanical thermal analysis also shows that the storage modulus of the nanocomposites at glass transition temperature is higher compared to the pure blend. Such improvements in mechanical properties have been correlated in terms of fracture behavior of the nanocomposites using scanning electron microscopy analysis. Thermal stability of the prepared nanocomposites is substantially higher compared to neat EVA/EPDM blend, confirming the formation of high‐performance polymer nanocomposites. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Preparation and flame resistance properties of revolutionary self-extinguishing epoxy nanocomposites based on layered double hydroxides

Layered double hydroxides/epoxy (LDHs/EP) nanocomposites were prepared from organo-modified LDHs, a diglycidyl ether of bisphenol A monomer (DGEBA) and amine curing agents. The organo-modified LDHs were obtained by ionic exchange of a magnesium-aluminum carbonate LDH in an acid medium. X-ray diffraction and transmission electron microscopy showed a dispersion of the layers at a nanometer scale, indicating the formation of LDH/EP nanocomposites. The thermal degradation and flame resistance properties of LDH/EP nanocomposites, montmorillonite-epoxy (MMT/EP) nanocomposites, LDH/EP microcomposites and aluminum hydroxide-epoxy microcomposites were compared by thermogravimetrical analyses, simultaneous thermal analyses, UL94 and cone calorimeter tests. Only LDH/EP nanocomposites showed self-extinguishing behavior in the horizontal UL94 test; LDH/EP microcomposites and MMT/EP nanocomposites samples burned completely showing that the unique flame resistance of LDH/EP nanocomposites is related to both the level of dispersion and the intrinsic properties of LDH clay. Furthermore, cone calorimeter revealed intumescent behavior for LDH/EP nanocomposites and a higher reduction in the peak heat release rate compared to MMT/EP nanocomposites.     

Reinforcement in melt-processed polymer–graphene composites at extremely low graphene loading level

We have prepared polymer nanocomposites reinforced with exfoliated graphene layers solely via melt blending. For this study polyethylene terephthalate (PET) was chosen as the polymer matrix due to its myriad of current and potential applications. PET and PET/graphene nanocomposites were melt compounded on an internal mixer and the resulting materials were compression molded into films. Transmission electron microscopy and scanning electron microscopy revealed that the graphene flakes were randomly orientated and well dispersed inside the polymer matrix. The PET/graphene nanocomposites were found to be characterized by superior mechanical properties as opposed to the neat PET. Thus, at a nanofiller load as low as 0.07 wt%, the novel materials presented an increase in the elastic modulus higher than 10% and an enhancement in the tensile strength of more than 40% compared to pristine PET. The improvements in the tensile strength were directly correlated to changes in elongation at break and indirectly correlated to the fracture initiation area. The enhancements observed in the mechanical properties of polymer/graphene nanocomposites achieved at low exfoliated graphene loadings and manufactured exclusively via melt mixing may open the door to industrial manufacturing of economical novel materials with superior stiffness, strength and ductility.     

Facile synthesis of NiAl-layered double hydroxide/graphene hybrid with enhanced electrochemical properties for detection of dopamine

Layered double hydroxides (LDHs), also known as hydrotalcite-like anionic clays, have been investigated widely as promising electrochemical active materials. Due to the inherently weak conductivity, the electrochemical properties of LDHs were improved typically by utilization of either functional molecules intercalated between LDH interlayer galleries, or proteins confined between exfoliated LDH nanosheets. Here, we report a facile protocol to prepare NiAl-LDH/graphene (NiAl-LDH/G) nanocomposites using a conventional coprecipitation process under low-temperature conditions and subsequent reduction of the supporting graphene oxide. Electrochemical tests showed that the NiAl-LDH/G modified electrode exhibited highly enhanced electrochemical performance of dopamine electrooxidation in comparison with the pristine NiAl-LDH modified electrode. Results of high-resolution transmission electron microscopy and Raman spectra provide convincing information on the nanostructure and composition underlying the enhancement. Our results of the NiAl-LDH/G modified electrodes with the enhanced electrochemical performance may allow designing a variety of promising hybrid sensors via a simple and feasible approach.     

Synergistic effects of exfoliated LDH with some halogen‐free flame retardants in LDPE/EVA/HFMH/LDH nanocomposites

The synergistic effects of exfoliated layered double hydroxides (LDH) with some halogen‐free flame retardant (HFFR) additives, such as hyperfine magnesium hydroxide (HFMH), microencapsulated red phosphorus (MRP), and expandable graphite (EG), in the low‐density polyethylene/ethylene vinyl acetate copolymer/LDH (LDPE/EVA/LDH) nanocomposites have been studied by X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermal analysis (TGA and DTG), mechanical properties, limiting oxygen index (LOI), and UL‐94 tests. The XRD results show that EVA as an excellent compatilizer can promote the exfoliation of LDH and homogeneous dispersion of HFMH in the LDPE/EVA/HFMH/LDH nanocomposites prepared by melt‐intercalation method. The TEM images demonstrate that the exfoliated LDH layers can act as synergistic compatilizer and dispersant to make the HFMH particles dispersed homogeneously in the LDPE matrix. The results from the mechanical, LOI, and UL‐94 tests show that the exfoliated LDH layers can also act as the nano‐enhanced and flame retardant synergistic agents and thus increase the tensile strength, LOI values, and UL‐94 rating of the nanocomposites. The morphological structures of charred residues observed by SEM give the positive evidence that the compact charred layers formed from the LDPE/EVA/HFMH/LDH nanocomposites with the exfoliated LDH layers play an important role in the enhancement of flame retardant and mechanical properties. The TGA and DTG data show that the exfoliated LDH layers as excellent flame retardant synergist of MRP or EG can apparently increase the thermal degradation temperature and the charred residues after burning. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of polystyrene/layered double‐hydroxide nanocomposites via in situ emulsion and suspension polymerization

Polystyrene (PS)/ZnAl layered double‐hydroxide (LDH) nanocomposites were synthesized via in situ emulsion and suspension polymerization in the presence of N‐lauroyl‐glutamate surfactant and long‐chain spacer and characterized with elemental analysis, Fourier transform infrared spectrum, X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis. The XRD and TEM results demonstrate that the exfoliated ZnAl–LDH layers were well dispersed at molecular level in the PS matrix. The completely exfoliated PS/LDH nanocomposites were obtained even at the 20 and 10 wt % LDH loadings prepared by emulsion polymerization and suspension polymerization, respectively. The PS/LDH nanocomposites with a suitable amount of LDH showed apparently enhanced thermal stability. When the 50% weight loss was selected as a comparison point, the decomposition temperature of the exfoliated PS/LDH sample prepared by emulsion polymerization with a 5 wt % LDH loading was about 28°C higher than that of pure PS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3758–3766, 2006