Effect of modified carbon nanotube on the properties of aromatic polyester nanocomposites

Aromatic polyester nanocomposites based on poly(ethylene 2,6-naphthalate) (PEN) and carbon nanotube (CNT) were prepared by melt blending using a twin-screw extruder. Modification of CNT to introduce carboxylic acid groups on the surface was performed to enhance intermolecular interactions between CNT and the PEN matrix through hydrogen bonding formation. Morphological observations revealed that the modified CNT was uniformly dispersed in the PEN matrix and increased interfacial adhesion between the nanotubes and the PEN, as compared to the untreated CNT. Furthermore, a very small quantity of the modified CNT substantially improved thermal stability and tensile strength/modulus of the PEN nanocomposites. This study demonstrates that the thermal, mechanical, and rheological properties of the PEN nanocomposites are strongly dependent on the uniform dispersion of CNT and the interactions between CNT and PEN, which can be enhanced by slight chemical modification of CNT, providing a design guide of CNT-reinforced PEN nanocomposites with a great potential for industrial uses.     

Structure and crystallization behavior of Nylon 66/multi-walled carbon nanotube nanocomposites at low carbon nanotube contents

Multi-walled carbon nanotubes (MWNTs) were modified with poly(hexamethylene adipamide) (also known as Nylon 66) via a controlled polymer solution crystallization method. A “nanohybrid shish kebab” (NHSK) structure was found wherein the MWNT resembled the shish while Nylon 66 lamellar crystals formed the kebabs. These Nylon 66-functionalized MWNTs were used as precursors to prepare polymer/MWNT nanocomposites. Excellent dispersion was revealed by optical and electron microscopies. Nitric acid etching of the nanocomposites showed that MWNT formed a robust network in Nylon 66. Non-isothermal DSC results showed multiple melting peaks, which can be attributed to lamellar thickness changes upon heating. The crystallite sizes L₁₀₀ and L₀₁₀ of Nylon 66, determined by WAXD, decreased with increasing MWNT contents. Isothermal DSC results showed that crystallization kinetics increased first and then decreased with increasing MWNT contents in Nylon 66. This study showed that the effect of MWNTs on Nylon 66 crystallization is twofold: MWNTs provide heterogeneous nucleation sites for Nylon 66 crystallization while the tube network structure hinders large crystal growth.     

The influence of carbon nanotube aspect ratio on the foam morphology of MWNT/PMMA nanocomposite foams

Polymer nanocomposite foams, products from the foaming of polymer nanocomposites, have received increasing attention in both the scientific and industrial communities. Nanocomposite foams filled with carbon nanofibers or carbon nanotubes with high electrical conductivity, enhanced mechanical properties, and low density are potential effective electromagnetic interference (EMI) shielding materials. The EMI shielding efficiency depends on the electrical conductivity and bubble density, which in turn, depend on the properties of the filler. In the current study, multi walled carbon nanotubes (MWNT) with controlled aspect ratio were used to alter the bubble density in MWNT/poly(methyl methacrylate) (PMMA) nanocomposites. It was found that the nanocomposite foams filled with shorter MWNT had higher bubble density under the same foaming conditions and MWNT concentration. Both the ends and sidewalls of carbon nanotubes can act as heterogeneous bubble nucleation sites, but the ends are more effective compared to the sidewalls. Shorter nanotubes provide more ends at constant MWNT concentration compared to long nanotubes. As a result, the difference in the foam morphology, particularly the bubble density, is due to the difference in the number of effective bubble nucleation sites.     

Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites

The thermal and flammability properties of polypropylene/multi-walled carbon nanotube, (PP/MWNT) nanocomposites were measured with the MWNT content varied from 0.5 to 4% by mass. Dispersion of MWNTs in these nanocomposites was characterized by SEM and optical microscopy. Flammability properties were measured with a cone calorimeter in air and a gasification device in a nitrogen atmosphere. A significant reduction in the peak heat release rate was observed; the greatest reduction was obtained with a MWNT content of 1% by mass. Since the addition of carbon black powder to PP did not reduce the heat release rate as much as with the PP/MWNT nanocomposites, the size and shape of carbon particles appear to be important for effectively reducing the flammability of PP. The radiative ignition delay time of a nanocomposite having less than 2% by mass of MWNT was shorter than that of PP due to an increase in the radiation in-depth absorption coefficient by the addition of carbon nanotubes. The effects of residual iron particles and of defects in the MWNTs on the heat release rate of the nanocomposite were not significant. The flame retardant performance was achieved through the formation of a relatively uniform network-structured floccule layer covering the entire sample surface without any cracks or gaps. This layer re-emitted much of the incident radiation back into the gas phase from its hot surface and thus reduced the transmitted flux to the receding PP layers below it, slowing the PP pyrolysis rate. To gain insight into this phenomena, thermal conductivities of the nanocomposites were measured as a function of temperature while the thermal conductivity of the nanocomposite increases with an increase in MWNT content, the effect being particularly large above 160 °C, this increase is not as dramatic as the increase in electrical conductivity, however.     

Unique nucleation of multi-walled carbon nanotube and poly(ethylene 2,6-naphthalate) nanocomposites during non-isothermal crystallization

Multi-walled carbon nanotube (MWCNT) and poly(ethylene 2,6-naphthalate) (PEN) nanocomposites are prepared by a melt blending process. There are significant dependence of non-isothermal crystallization behavior and kinetics of PEN/MWCNT nanocomposites on the MWCNT content and cooling rate. The incorporation of MWCNT accelerates the mechanism of nucleation and crystal growth of PEN, and this effect is more pronounced at lower MWCNT content. Combined Avrami and Ozawa analysis is found to be effective in describing the non-isothermal crystallization of the PEN/MWCNT nanocomposites. The MWCNT in the PEN/MWCNT nanocomposites exhibits much higher nucleation activity than any nano-scaled reinforcement. When a vary small quantity of MWCNT was added, the activation energy for crystallization is lower, then gradually increased, and becomes higher than that of pure PEN above 1.0 wt% MWCNT content. The incorporation of MWCNT improves the storage modulus and loss modulus of PEN/MWCNT nanocomposites.     

Magnetically processed carbon nanotube/epoxy nanocomposites: Morphology, thermal, and mechanical properties

The processing-structure-property relationships of multiwalled carbon nanotubes (MWNTs)/epoxy nanocomposites processed with a magnetic field have been studied. Samples were prepared by dispersing the nanotube in the epoxy and curing under an applied magnetic field. The nanocomposite morphology was characterized with Raman spectroscopy and wide angle X-ray scattering, and correlated with thermo-mechanical properties. The modulus parallel to the alignment direction, as measured by dynamic mechanical analysis, showed significant anisotropy, with a 72% increase over the neat resin, and a 24% increase over the sample tested perpendicular to the alignment direction. A modest enhancement in the coefficient of thermal expansion (CTE) parallel to the alignment direction was also observed. These enhancements were achieved even though the nanotubes were not fully aligned, as determined by Raman spectroscopy. The partial nanotube alignment is attributed to resin a gel time that is faster than the nanotube orientation dynamics. Thermal conductivity results are also presented.     

Synthesis and properties of new polyamide/multiwalled carbon nanotube nanocomposites containing a pyridine group

The effects of multiwalled carbon nanotubes (MWCNTs) on the thermal properties and flame retardancy of a new polyamide (PA) derived from glutaric acid and aromatic diamine were investigated in this work. The synthesized PA containing pyridine and trialkylamine groups was characterized by ¹H NMR and SEC. The PA unit structure was geometrically optimized at the B₃LYP/6‐311⁺⁺G(d, p) level of theory. PA showed a glass transition temperature of 151 ºC. PA nanocomposites containing two different amounts of MWCNTs were prepared via the solution intercalation technique with the solvent N,N‐dimethylacetamide. Transmission electron microscopy showed that MWCNTs were exfoliated in the polymer matrix, resulting in well‐dispersed morphologies at 3 wt% MWCNT content. The redox behaviors of PA and the nanocomposites were examined using cyclic voltammetry (CV). PA showed a reversible oxidation process in the CV scan. Thermal and flammability properties of the nanocomposites were studied by TGA in nitrogen and air, DSC and with a microscale combustion calorimeter. The TGA results showed that the addition of MWCNTs resulted in a substantial increase in the thermal stability and char yields of the nanocomposites compared with neat PA. The heat release rate and total heat release were significantly reduced in the presence of MWCNTs. © 2013 Society of Chemical Industry     

Carbon nanotube agglomeration effect on piezoresistivity of polymer nanocomposites

Carbon nanotube (CNT) agglomeration exists inevitably in all CNT-polymer composites. This paper quantified the effect of CNT agglomeration on the piezoresistivity of CNT-polymer composites. A new multiscale model of 3-dimensional deformable CNT percolating networks has been developed, where the CNT agglomerates were modeled as second phases embedded randomly in the polymer matrix. The newly developed model agrees quantitatively with experimental data. The study found that the CNT agglomeration is responsible for the reduced electrical conductivity and nonlinearity of piezoresistivity with respect to the zero strain. Its effect can be quantified by the newly developed model. Parametric analyses were conducted to show the effects of morphology and electrical properties of CNTs, the Poisson's ratio of CNT-polymer composites and the extent, internal density and size of CNT agglomeration on the electrical conductivity and piezoresistivity. The current work provides a useful analysis tool for designing smart sensing and multifunctional polymer composites.     

An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foams

Polymer nanocomposite foams are promising low density substitutes for nanocomposites. Carbon nanotube/polymer nanocomposite foams possess high strength, low density, and can be made conductive. Good control of foam properties is of great importance in the application of such materials. In the current study, multi-walled carbon nanotubes (MWNTs) with controlled aspect ratio were used to alter the foam morphology in MWNT/poly(methyl methacrylate) (PMMA) nanocomposite foams produced by a supercritical carbon dioxide (CO₂) foaming process. It was found that with the addition of one weight percent of MWNTs, the Young’s modulus of polymer foams increased by as much as 82%, and the collapse strength increased by as much as 104%. The influence of MWNT aspect ratio on the compressive properties of nanocomposite foams was investigated. The addition of MWNTs influenced the foam properties in two ways: improving the compressive properties of the solid matrix, and reducing the bubble size of the nanocomposite foams. A modified constitutive model for predicting the compressive properties of high density closed-cell polymer foams was developed. The influence of the bubble size on the mechanical properties of polymer foams was discussed based on the new model.     

Polyethylene/carbon nanotube nano hybrid shish-kebab obtained by solvent evaporation and thin-film crystallization

Crystallization of polymers on carbon nanotubes (CNTs) has resulted in a novel nano hybrid shish kebab (NHSK) structure, within which CNTs serve as the nucleation sites (shish) and polymer lamellar crystals form the kebabs. Previously reported NHSK structures were obtained by solution crystallization, bulk crystallization and physical vapor deposition methods. Herein we report a simple, rapid, yet effective approach to produce NHSK materials using solvent evaporation and thin film crystallization. Polyethylene (PE) was used as the model polymer. PE solution was drop cast on CNT-coated carbon films, and upon solvent evaporation, PE crystallized onto/near CNTs, following the template of the latter and NHSK structure was then formed. The final morphology was found to result from the competition between heterogeneous nucleation and homogeneous nucleation of PE. The formation of NHSK also strongly depends on the structure of CNTs as well as the molecular weight of PE. This work shows a facile method to form NHSK and to study CNT-induced crystallization under nonequilibrium conditions.     

Polybenzoxazine/single-walled carbon nanotube nanocomposites stabilized through noncovalent bonding interactions

In this study we prepared a new class of pyrene-functionalized benzoxazines (Py-BZ) through reactions of phenol, paraformaldehyde, and pyren-1-amine (Py-NH₂) in toluene and EtOH. We prepared Py-NH₂ through catalytic reduction of 1-nitropyrene (Py-NO₂), which we had synthesized through electrophilic aromatic substitution of pyrene, using HNO₃ as the nitration agent. ¹H and ¹³C nuclear magnetic resonance spectroscopy and Fourier transform infrared (FTIR) spectroscopy confirmed the chemical structure of this new monomer; differential scanning calorimetry (DSC) and FTIR spectroscopy revealed the curing behavior of the Py-BZ polymers. The presence of the pyrene-functionalized benzoxazine enhanced the solubility of single-walled carbon nanotubes (SWCNTs) in THF, leading to the formation of highly dispersible Py-BZ/SWCNT organic/inorganic hybrid complex materials. Fluorescence emission spectroscopy revealed significant π–π stacking interactions between the Py-BZ and the SWCNTs in these complexes. In addition, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis revealed that incorporating the SWCNTs into the Py-BZ matrix significantly enhanced the thermal stability of the polymer after thermal curing.     

Cure behavior of epoxy/MWCNT nanocomposites: The effect of nanotube surface modification

The effect of carboxyl and fluorine modified multi-wall carbon nanotubes (MWCNTs) on the curing behavior of diglycidyl ether of bisphenol A (DGEBA) epoxy resin was studied using differential scanning calorimetry (DSC), rheology and infrared spectroscopy (IR). Activation energy (E_a) and rate constants (k) obtained from isothermal DSC were the same for the neat resin and fluorinated MWCNT system (47.7 and 47.5 kJ/mol, respectively) whereas samples containing carboxylated MWCNTs exhibited a higher activation energy (61.7 kJ/mol) and lower rate constant. Comparison of the activation energies, rate constants, gelation behavior and vitrification times for all of the samples suggests that the cure mechanisms of the neat resin and fluorinated sample are similar but different from the carboxylated sample. This can be explained by the difference in how the fluorinated nanotubes react with the epoxy resin compared to the carboxylated nanotubes. Although the two systems have different reaction mechanisms, both systems have similar degrees of conversion as calculated from the infrared spectroscopic data, glass transition temperature (T_g), and predictions based on DSC data. This difference in reaction mechanism may be attributed to differences in nanotube dispersion; the fluorinated MWCNT system is more uniformly dispersed in the matrix whereas the more heterogeneously dispersed carboxylated MWCNTs can hinder mobility of the reactive species and disrupt the reaction stoichiometry on the local scale.     

Synthesis and processing of PMMA carbon nanotube nanocomposite foams

Poly(methyl methacrylate) (PMMA) multi-walled carbon nanotubes (MWCNTs) nanocomposites were synthesized by several methods using both pristine and surface functionalized carbon nanotubes (CNTs). Fourier transform infrared (FTIR) spectroscopy was used to characterize the presence and types of functional groups in functionalized MWCNTs, while the dispersion of MWCNTs in PMMA was characterized using scanning electron microscopy (SEM). The prepared nanocomposites were foamed using carbon dioxide (CO₂) as the foaming agent. The cell morphology was observed by SEM, and the cell size and cell density were calculated via image analysis. It was found that both the synthesis methods and CNTs surface functionalization affect the MWCNTs dispersion in the polymer matrix, which in turn profoundly influences the cell nucleation mechanism and cell morphology. The MWCNTs are efficient heterogeneous nucleation agents leading to increased cell density at low particle concentrations. A mixed mode of nucleation mechanism was observed in nanocomposite foams in which polymer rich and particle rich region co-exist due to insufficient particle dispersion. This leads to a bimodal cell size distribution. Uniform dispersion of MWCNTs can be achieved via synergistic combination of improving synthesis methodology and CNTs surface functionalization. Foams from these nanocomposites exhibit single modal cell size distribution and remarkably increased cell density and reduced cell size. An increase in cell density of ∼70 times and reduction of cell size of ∼80% was observed in nanocomposite foam with 1% MWCNTs.     

Morphology and electrical properties of polymethylmethacrylate/poly(styrene‐co‐acrylonitrile)/multi‐walled carbon nanotube nanocomposites

Nanocomposites of blends of polymethylmethacrylate (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) with multi‐walled carbon nanotubes (MWCNTs) were prepared by melt mixing in a twin‐screw extruder. The dispersion state of MWCNTs in the matrix polymers was investigated using transmission electron microscopy. Interestingly enough, in most of the nanocomposites, the MWCNTs were observed to be mainly located at SAN domains, regardless of the SAN compositions in the PMMA/SAN blend and of the processing method. One possible reason for this morphology may be the π–π interactions between MWCNTs and the phenyl ring of SAN. The shift in G‐band peak observed in the Raman spectroscopy may be the indirect evidence proving these interactions. The percolation threshold for electrical conductivity of PMMA/SAN/MWCNT nanocomposites was observed to be around 1.5 wt %. Nanocomposites with PMMA‐rich composition showed higher electrical conductivity than SAN‐rich nanocomposites at a fixed MWCNT loading. The dielectric constant measurement also showed composition‐dependent behavior. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polymer conformation-assisted wrapping of single-walled carbon nanotube: The impact of cis-vinylene linkage

A soluble π-conjugated polymer cis-PmPV is found to be twice as effective as its trans-PmPV isomer in dispersing SWNTs into organic solvents. The improved efficiency is related to the specific conformation of cis-vinylene-enriched PmPV, which facilitates a planar π-π interaction with SWNT surface and leads to improved nanotube dispersion. ¹H NMR spectra indicate that the cis-CHCH bonds are partially converted to the trans-CHCH, thereby providing necessary conformational cavity for SWNT wrapping. Irradiation triggers a precipitation from SWNT dispersion, providing a purified SWNT/conjugated polymer composite.     

Cellular structures of carbon nanotubes in a polymer matrix improve properties relative to composites with dispersed nanotubes

A new processing method has been developed to combine a polymer and single wall carbon nanotubes (SWCNTs) to form electrically conductive composites with desirable rheological and mechanical properties. The process involves coating polystyrene (PS) pellets with SWCNTs and then hot pressing to make a contiguous, cellular SWCNT structure. By this method, the electrical percolation threshold decreases and the electrical conductivity increases significantly as compared to composites with well-dispersed SWCNTs. For example, a SWCNT/PS composite with 0.5 wt% nanotubes made by this coated particle process (CPP) has an electrical conductivity of ∼3 × 10⁻⁴ S/cm, while a well-dispersed composite made by a coagulation method with the same SWCNT amount has an electrical conductivity of only ∼10⁻⁸ S/cm. The rheological properties of the composite with a macroscopic cellular SWCNT structure are comparable to PS, while the well-dispersed composite exhibits a solid-like behavior, indicating that the composites made by this new CPP are more processable. In addition, the mechanical properties of the CPP-made composite decrease only slightly, as compared with PS. Relative to the common approach of seeking better dispersion, this new fabrication method provides an important alternative means to higher electrical conductivity in SWCNT/polymer composites. Our straightforward particle coating and pressing method avoids organic solvents and is suitable for large-scale, inexpensive processing using a wide variety of polymers and nanoparticles.     

The Electrical Properties and Conducting Mechanisms of Carbon Nanotube/Polymer Nanocomposites: A Review

This paper reviews the mechanism of the conducting process of carbon nanotubes (CNTs)-reinforced polymer nanocomposites. Comparison of the two different mechanisms, the formation of the conducting network and the hopping of the electrons, are discussed. The paper also describes the critical factors that determine percolation thresholds or the conductivity of the nanocomposites. By summarizing the predecessors' research, some measures are put forward to improve the structure of the nanocomposites to get the samples that have the most extraordinary electrical conductivity with the lowest CNTs concentrations.     

Preparation and properties of the single‐walled carbon nanotube/cellulose nanocomposites using N‐methylmorpholine‐N‐oxide monohydrate

Single‐walled carbon nanotube (SWNT)/cellulose nanocomposite films were prepared using N‐methylmorpholine‐N‐oxide (NMMO) monohydrate as a dispersing agent for the acid‐treated SWNTs (A‐SWNTs) as well as a cellulose solvent. The A‐SWNTs were dispersed in both NMMO monohydrate and the nanocomposite film (as confirmed by scanning electron microscopy) because of the strong hydrogen bonds of the A‐SWNTs with NMMO and cellulose. The mechanical properties, thermal properties, and electric conductivity of the nanocomposite films were improved by adding a small amount of the A‐SWNTs to the cellulose. For example, by adding 1 wt % of the A‐SWNTs to the cellulose, tensile strain at break point, Young's modulus, and toughness increased ～ 5.4, ～ 2.2, and ～ 6 times, respectively, the degradation temperature increased to 9°C as compared with those of the pure cellulose film, and the electric conductivities at ? (the wt % of A‐SWNTs in the composite) = 1 and 9 were 4.97 × 10^?4 and 3.74 × 10^?2 S/cm, respectively. Thus, the A‐SWNT/cellulose nanocomposites are a promising material and can be used for many applications, such as toughened Lyocell fibers, transparent electrodes, and soforth. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Carbon nanotube induced polymer crystallization: The formation of nanohybrid shish-kebabs

Carbon nanotubes (CNTs) have attracted tremendous attention in recent years because of their superb optical, electronic and mechanical properties. In this article, we aim to discuss CNT-induced polymer crystallization with the focus on the newly discovered nanohybrid shish-kebab (NHSK) structure, wherein the CNT serves as the shish and polymer crystals are the kebabs. Polyethylene (PE) and Nylon 6,6 were successfully decorated on single-walled carbon nanotubes (SWNTs), multi-walled carbon nanotubes (MWNTs), and vapor grown carbon nanofibers (CNFs). The formation mechanism was attributed to “size-dependent soft epitaxy”. Polymer CNT nanocomposites (PCNs) containing PE, Nylon 6,6 were prepared using a solution blending technique. Both pristine CNTs and NHSKs were used as the precursors for the PCN preparation. The impact of CNTs on the polymer crystallization behavior will be discussed. Furthermore, four different polymers were decorated on CNTs using the physical vapor deposition method, forming a two-dimensional NHSK structure. These NHSKs represent a new type of nanoscale architecture. A variety of possible applications will be discussed.