Stimuli-responsive conjugated polymers. Synthesis and chiroptical properties of polyacetylene carrying l-glutamic acid and azobenzene in the side chain

A glutamic acid- and azobenzene-containing novel N-propargylamide, (S)-CHCCH₂NHCOCH(CH₂CH₂CO₂CH₂C₆H₅)NHCO₂CH₂CH₂-p-C₆H₄NNC₆H₅ (1) was synthesized and polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] as a catalyst to obtain the corresponding polymer [poly(1)] with the moderate number-average molecular weight of 12,200 in 93% yield. The chiroptical studies revealed that poly(1) took a helical structure in THF, CHCl₃, CH₂Cl₂ and toluene. Poly(1) underwent solvent and heat-driven helix-helix transition. The trans-azobenzene of the side chain isomerized into cis upon UV-irradiation, accompanying decrease in helicity. The cis-azobenzene moiety reisomerized into trans upon visible-light irradiation, while the polymer did not recover the original helicity.     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Synthesis and electro-optical properties of helical polyacetylenes carrying carbazole and triphenylamine moieties

Novel chiral acetylene monomers bearing carbazole and triphenylamine groups, namely, (S)-3-butyn-2-yl 2-(9-carbazolyl)ethyl carbonate (1) and (S)-3-butyn-2-yl 4-(diphenylamino)benzoate (2) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] catalyst to give the corresponding polymers with moderate molecular weights (M_n 13.0 × 10³ and 15.5 × 10³) in good yields (86% and 88%). CD spectroscopic studies revealed that poly(1) and poly(2) took predominantly one-handed helical structure in CHCl₃. The helical structures of poly(1) and poly(2) were very stable against heating and addition of MeOH. The solution of poly(1) and poly(2) emitted fluorescence in 0.52% and 7.2% quantum yields, which were lower than those of the corresponding monomers 1 and 2 (22.5% and 76.5%). The cyclic voltammograms of the polymers indicated that the oxidation potentials of the polymers were lower than those of the monomers. The polymers showed electrochromism and changed the color from pale yellow to pale blue by application of voltage, presumably caused by the formation of polaron at the carbazole and triphenylamine moieties. The onset temperatures of weight loss of poly(1) and poly(2) were 225 and 270 °C under air.     

Synthesis and properties of polyacetylenes carrying N-phenylcarbazole and triphenylamine moieties

Novel acetylene monomers containing N-phenyl-substituted carbazole (Cz) and triphenylamine (TPA) groups, namely, 3-ethynyl-9-phenylcarbazole (1) and p-(N,N-diphenylamino)phenylacetylene (2) were synthesized, and polymerized with several Rh-, W-, and Mo-based catalysts. Poly(1) and poly(2) with high number-average molecular weights (15?500-974?000) were obtained in good yields (77-97%), when [(nbd)RhCl]₂-Et₃N (nbd = norbornadiene) was used as a catalyst. The polymers exhibited UV-vis absorption peaks derived from the Cz and TPA moieties at 250-350 nm and polyacetylene backbone above 350 nm. The UV-vis absorption band edge wavelengths of the polymers were longer than those of the corresponding monomers. Poly(2) exhibited a UV-vis absorption peak at a longer wavelength than poly(1) did, which indicates that poly(2) has main chain conjugation longer than that of poly(1). The molecular weights and photoluminescence quantum yields of the polymers obtained by the polymerization using [(nbd)RhCl]₂-Et₃N were larger than those of the Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃]-based counterparts. The cyclic voltammograms of the polymers indicated that they had clear electrochemical properties; the onset oxidation voltage of poly(1) was higher than those of N-alkyl-substituted Cz derivatives. The polymers showed electrochromism and changed the color from pale yellow to blue by application of voltage, presumably caused by the formation of charged polaron at the Cz and TPA moieties. The temperatures for 5% weight loss of the polymers were around 350-420 °C under air, indicating the high thermal stability.     

Synthesis and properties of polyacetylenes having pendent phenylethynylcarbazolyl groups

Novel acetylene monomers substituted with phenylethynylcarbazolyl groups, 3-[(4-octylphenyl)ethynyl]-9-propargylcarbazole (1), 3,6-bis[(4-octylphenyl)ethynyl]-9-propargylcarbazole (2), 9-(4-ethynylphenyl)-3-[(4-octylphenyl)ethynyl]carbazole (3), and 9-(4-ethynylphenyl)-3,6-bis[(4-octylphenyl)ethynyl]carbazole (4) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] and WCl₆-n-Bu₄Sn catalysts. The corresponding polyacetylenes with number-average molecular weights ranging from 9200 to 94?000 were obtained in 20-98% yields. The IR spectra of the polymers revealed that acetylene polymerization took place at the terminal ethynyl group, while the ethynylene group remained intact. The UV-vis absorption band edge wavelengths of W-based poly(3) and poly(4) were longer than those of the other polymers. W-Based poly(4) emitted fluorescence with the highest quantum yield (41%). Poly(1) exhibited excimer-based fluorescence in dilute solution.     

Synthesis of novel poly(diphenylacetylene)s with both trimethylsilyl and alkyl groups: The effect of desilylation on gas permeability

Diphenylacetylenes having both a trimethylsilyl group and an alkyl group at para positions [Me₃SiC₆H₄CCC₆H₄R; R = Et (1a), n-Bu (1b), t-Bu (1c), n-C₈H₁₇ (1d)] and having only an alkyl group [PhCCC₆H₄R; R = n-Bu (1B), n-C₈H₁₇ (1D)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2D). The formed polymers except 2c afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of the Si-containing polymer membranes (2a, 2b, 2d) was carried out with trifluoroacetic acid, and the desilylated polymer membranes (3a, 3b, 3d) were obtained. The permeability to O₂, N₂, and CO₂ were determined for the obtained polymer membranes. All the desilylated membranes showed lower gas permeability than the Si-containing counterparts. To clarify the effects of the desilylation further, CO₂ diffusivity, CO₂ solubility, and fractional free volume (FFV) of the polymer membranes were investigated. The FFV and CO₂ diffusivity decreased upon desilylation, while CO₂ solubility hardly varied.     

Preparation and characterization of poly(?-caprolactone)-b-polyacrylonitrile (PCL-b-PAN) and poly(l-lactide)-b-polyacrylonitrile (PLLA-b-PAN) copolymers by aluminum and lithium alkoxides containing double-headed initiators

Three new metal alkoxides, [(MMPEP)Al(μ-OCH₂C₆H₄CH₂Cl)]₂ (1), [(MMPEP-H)Li·(BnOH)]₂ (2) and [(MMPEP-H)Li·(HOCH₂C₆H₄CH₂Cl)]₂ (3) (MMPEP-H₂: 2,2′-methylene-bis{4,6-di(1-methyl-1-phenylethyl)phenol}) have been synthesized and characterized. Complex 1 was prepared by the reaction of [(MMPEP)Al(CH₃)(Et₂O)] with p-(chloromethyl)benzyl alcohol. Followed by the reaction of MMPEP-H₂ with ⁿBuLi, BnOH or p-(chloromethyl)benzyl alcohol was added to give complexes 2 and 3, respectively. Complex 1 has shown excellent catalytic activity towards ring-opening polymerization (ROP) of ?-caprolactone. Both complexes 2 and 3 are active for ROP of l-lactide. Block copolymers of poly(?-caprolactone)-b-polyacrylonitrile (PCL-b-PAN) and poly(l-lactide)-b-polyacrylonitrile can be synthesized by combining a technique of atom transfer radical polymerization (ATRP) and ROP using a double-headed initiator. Microphase-separated morphology of PCL-b-PAN has been observed by transmission electron microscopy, indicating the formation of self-assembled nanostructure.     

The effect of [(η-C3H5)(η-C5H5)Mo(CO)2] on drying of solvent-borne alkyd paints

Allyl molybdenum complex [(η³-C₃H₅)(η⁵-C₅H₅)Mo(CO)₂] (Mo-A) was examined as a new drier for solvent-borne alkyd binder. The drying activity of pure Mo-A and the of combinations of Mo-A with cobalt(II) 2-ethylhexanoate (Co-Nuodex) was examined using standard methods for measurements of the drying time and hardness development of the alkyd film. The detailed study of the drying process was studied by time-resolved infrared spectroscopy on ethyl linoleate as well as on thin coating of alkyd binder.     

A Facile Access to New Polymethylmethacrylate-Anchored Ferrocene Substituted Nickel(II) Unsymmetrical Schiff Base Complexes: Synthesis and Characterization

This paper discloses two new side-chain metallopolymers containing an unsymmetrical organometallic Schiff base complex of Ni(II) linked to a polymethylmethacrylate (PMMA) matrix. The neutral ferrocene substituted Schiff base complex 1, Ni{CpFe(η⁵-C₅H₄)-C(O)CH=C(CH₃)N–o-C₆H₄N=CH-(2-O,5-OH-C₆H₃)} where (Cp = η⁵-C₅H₅), was synthesized via template reaction by condensation of the tridentate half-unit metalloligand Fc-C(O)CH=C(CH₃)-N(H)-o-C₆H₄NH₂ (Fc = ferrocenyl = CpFe(η⁵-C₅H₄)) with 2,5-dihydroxybenzaldehyde in the presence of nickel(II) acetate tetrahydrate. The binuclear Schiff base complex of Ni(II) containing an aromatic free hydroxyl group was reacted under basic conditions with PMMA to afford, upon trans-esterification reaction, metallopolymers 2 (complex 1 monomeric unit/PMMA = 1/5) and 3 (complex 1 monomeric unit/PMMA = 1/3). Elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopies, and cyclic voltammetry were utilized to characterize the newly synthetized compounds. Surface morphology of the metallopolymer film of 2 was studied using atomic force microscopy.     

Synthesis of polystyrene microgel with glucose as hydrophilic segment via controlled free-radical polymerization

4-Vinylbenzyl glucoside peracetate (1) was copolymerized with divinylbenzene (DVB) using 1-phenyl-1-(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)ethane (2) as an initiator in m-xylene at 138 °C for 20 h ([DVB]/[2]=28; [DVB]=0.62 mol L⁻¹). The copolymerizations were performed using the mole fraction of 1 in the total feed of 1 and DVB (F₁: [1]/[1]+[DVB]) ranging from 0.11 to 0.38 that produced the polystyrene (PSt) microgel with acetyl glucose, 3, in 46-53% yields. Dynamic laser light scattering (DLS) measurements showed that 3 was stably suspended in toluene as particles with average diameters (d's) ranging from 12 to 22 nm. A static laser light scattering (SLS) measurement gave the average molar mass, M_w,SLS, of 3 that ranged from 9.69×10⁴ to 6.96×10⁵. The numbers of the 1, 2, and DVB units in 3 (N₁, N₂, and N_DVB, respectively) were from 111 to 238, from 17 to 208, and from 350 to 4510, respectively. The deacetylation of 3 was achieved by treatment with sodium methoxide in dry 1,4-dioxane to produce the PSt microgel with glucose as the hydrophilic segment, 4. The solubilities of 4 in toluene, CHCl₃, THF, 1,4-dioxane, pyridine, DMF, DMSO, and H₂O, and the mixture of H₂O and 1,4-dioxane were examined, indicating that a hydrophilic property had been effectively introduced into 4.     

Bridge length effect of new dinuclear constrained geometry catalysts on controlling the polymerization behaviors of ethylene/styrene copolymerization

According to the observable evidence from ¹H and ¹³C nuclear magnetic resonance and mass spectrometry, new dinuclear constrained geometry catalysts (DCGCs) with a structure of [{Ti(η⁵:η¹-(C₉H₅)Si(CH₃)₂N^tBu)Cl₂(CH₂)_n}₂(C₆H₄)] [n = 0 (10), n = 1 (11), n = 2 (12)] were synthesized successfully. Copolymerization of ethylene and styrene were tested by using three new DCGCs and Dow CGC. The catalyst activity, the molecular weight (MW) and styrene content of the copolymers were sharply improved as the bridge structure was transformed from para-phenyl (10) to para-xylyl (11) and para-diethylenephenyl (12). The activity of 11 and 12 was about four to five times greater than that of 10 regardless of the polymerization conditions. In addition, the capability to form high MW polymers increased in the order of Dow CGC ≈ 10 < 11 < 12. The styrene contents in copolymers generated by 11 and 12 were higher than those of 10.     

Novel poly(diphenylacetylene)s with both alkyl and silyl groups as gas permeable membranes: Synthesis, desilylation, and gas permeability

Diphenylacetylenes having a dimethyloctylsilyl group and an alkyl group at para positions [Me₂n-C₈H₁₇SiC₆H₄CCC₆H₄R; R = H (1a), i-Pr (1b), t-Bu (1c), n-Bu (1d)] and having only an alkyl group [PhCCC₆H₄R; R = i-Pr (1B), t-Bu (1C)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2C). The formed polymers afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of Si-containing membranes (2a-d) was carried out with trifluoroacetic acid to give the desilylated membranes (3a-d). The permeability of these membranes to O₂, N₂, and CO₂ were determined. All the Si-containing membranes exhibited almost the same gas permeability. The desilylation of Si-containing membranes of 2a-c resulted in large increase of gas permeability. No apparent increasing of gas permeability was observed in the desilylation of 2d. To clarify the effects of desilylation, CO₂ diffusivity (D(CO₂)), CO₂ solubility (S(CO₂)), and fractional free volume (FFV) of the polymer membranes were investigated. The S(CO₂) values of desilylated membranes were much larger than that of Si-containing counterparts. The D(CO₂) and FFV of membranes of 2a-c increased through desilylation. The desilylated membrane of 3d had small D(CO₂) value and almost the same FFV compared with 2d. Further, the comparison of the permeability between three types of membranes with the same chemical structure revealed that the microvoids were not generated by the desilylation of membranes of poly(diphenylacetylene)s containing alkyl groups.     

Synthesis and characterization of low- and medium-molecular-weight hyperbranched polyethylenes by chain walking ethylene polymerization with Pd-diimine catalysts

We report in this article the synthesis and characterization of a range of hyperbranched polyethylenes having various low and medium molecular weights by chain walking ethylene polymerization with Pd-diimine catalysts of reduced ligand steric crowdedness, which are intended for potential applications as novel synthetic base stocks. Four Pd-diimine catalysts featured with different ligand crowdedness, ([(RC₆H₃NC(R′)-C(R′)NC₆H₃R)Pd(CH₃) (NCMe)]SbF₆) (1, R = 2,6-(iPr)₂, R′ = CH₃; 2, R = CH₃, R′ = H; 3, R = 2,6-(iPr)₂, R′ = H; 4, R = CH₃, R′ = CH₃), were employed herein for ethylene polymerizations at different conditions. Generally, reducing ligand steric crowdedness (in the order 1 > 4 > 3 > 2) leads to decreased catalyst activity and dramatically reduced polymer molecular weight. As opposed to high-molecular-weight polymers (weight-average molecular weight (M_w): about 150 kg/mol) obtained with catalyst 1, low-molecular-weight polymers (M_w: below 1.0 kg/mol) were obtained with 2 and 3, and medium-molecular-weight polymers (M_w: about 25 kg/mol) were produced with 4. Despite their various reduced molecular weights, the polymers are all featured with highly branched chain structures with a total branching density of above 100 branches per 1000 carbons. The low- and medium-molecular-weight hyperbranched polymers synthesized with 2-4 display good potential for applications as synthetic base stocks. In comparison with three commercial poly(α-olefin) based synthetic base stocks, they exhibit similar thermal and viscosity properties. Meanwhile, it is also discovered that a subsequent one-pot hydrogenation step can be incorporated in the process after the Pd-diimine catalyzed polymerization step to render nearly fully saturated hyperbranched polymers without the use of additional hydrogenation catalysts.     

Anodic carbon-boron bond cleavage through the intermediacy of electrogenerated bromonium ion

The electrochemical properties of a series of cyclic arylboronic esters, XC₆H₄B(OR)₂ [RR = CH₂CH₂; X = H (1a); p-Me (1b); p-OMe (1c); p-Cl (1d); p-Ph (1e); m-Cl (1f); m-OMe (1g); CF₃ (1h); OMe (1i); 2,6-dimethyl (1j); 1b with RR = (CH₂)₃, (1k); 1b with RR = CMe₂CMe₂, (1m)] has been studied in acetonitrile by cyclic voltammetry (CV) and controlled-potential electrolysis (CPE). The CV of representative examples of aryl borates with different substituents show one irreversible oxidation wave on a Pt cathode, at 1.8-1.9 V (vs. Ag/AgCl), with a negligible substituent effect. The cathodic CPE process led to small amounts of biaryls only, whereas the direct anodic CPE could not be carried out practically due to low currents. However, in the presence of electrogenerated bromonium (or iodonium) ions a C-B bond cleavage does take place to yield the corresponding bromoaryls, brominated phenols, and arylboronic acids as the major products.     

Electroreduction of lichexanthone

This paper reports the first study on the electrochemical reduction of lichexanthone (1H) (1-hydroxy-3,6-dimethoxy-8-methylxanthen-9-one) on glassy carbon (GC) electrodes in DMSO, using cyclic voltammetry, rotating disc and ring electrodes, and long-term controlled-potential electrolysis. Parameters involving data from cyclic voltammetry and rotating disc electrodes, such as current functions, E_pc1 vs. log ν, E_pc2 vs. log ν, E_pc/2,1 − E_pc1, −I_pc1ox/I_pc1red, I_pc2/I_pc1, E_1/2 vs. log ω, and collection efficiency (rotating disc and ring electrode data), were used to elucidate the reduction mechanism of 1H that involves two one-electron transfers (two reduction peaks in the voltammograms), the first of which, with reversible characteristics, involves electroreduction of 1H, producing a radical anion 1H⁻, whereas the second, with irreversible characteristics, involves electroreduction of 1H⁻, producing a dianion 1H²⁻. Both transfers appear to involve an E_rC_slow-type mechanism with a chemical step consisting of breakage of a bond followed by protonation of residual water, or parent compound, or solvent, etc., to yield 2-hydroxy-4-methoxy-6-methylphenyl 2-hydroxy-4-methoxyphenyl ketone (1H₃), directly, in the case of 1H²⁻ involved. Compound 1H₃ was elucidated by 1D- and 2D-NMR methods. D₀ = 2.66 × 10⁻⁶ cm² s⁻¹ was found for the electrochemical reduction of 1H.     

Paired electrochemical synthesis of new organosulfone derivatives

Electrochemical oxidation of “cathodically generated 4-aminocatechol (2)” has been studied in the presence of 4-toluenesulfinic acid (4a) and benzenesulfinic acid (4b) as nucleophiles in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinone derived from 4-aminocatechol (2) participates in Michael addition reaction with 4a or 4b to form the corresponding new organosulfone derivatives (5a and 5b). In this work we have proposed a mechanism for the electrode process. A Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ redox mediator was used for the anodic oxidation of 4-aminocatechol (2) to the corresponding o-quinone 3. The indirect electrochemical process consists of a multi-step such as (a) cathodic reduction of 4-nitrocatechol (1) to 4-aminocatechol (2), (b) chemical oxidation of 4-aminocatechol (2) to 4-aminoquinone (3) with the resulting Fe(CN)₆³⁻, (c) the chemical reaction of 4-aminoquinone (3) with 4-toluenesulfinic acid (4a) or benzenesulfinic acid (4b), and (d) the anodic regeneration of Fe(CN)₆³⁻. The paired electrochemical synthesis of organosulfone derivatives (5a and 5b) has been successfully performed in an one-pot process at carbon rod electrode as a working and platinum as a counter electrode in an undivided cell.