Two new luminescent Cd(II)/Zn(II) metal–organic frameworks for exceptionally selective detection of picric acid explosives

Two new coordination polymers, {[Cd(BIDPT)(oba)]·0.5H₂O}_n (1) and {[Zn(BIDPT)(4,4′-sdb)]·2.25H₂O}_n (2) (BIDPT = 4,4′-bis(imidazol-l-yl)diphenyl thioether, H₂oba = 4,4′-oxydibenzoic acid, 4,4′-H₂sdb = 4,4′-sulfonyldibenzoic acid), have been solvothermally synthesized and characterized. Both 1 and 2 show 2-fold interpenetrating 3D frameworks with {6⁵ ∙ 8} cds and {6⁶} dia topology, respectively. These two coordination polymers show strong luminescence and their luminescence could be quenched by a series of nitro explosives. Importantly, they exhibit very highly sensitive and selective detection of picric acid compared to other nitro explosives.     

Dy(III) sorption from water solutions by mesoporous silicas functionalized with phosphonic acid groups

The sorption properties towards dysprosium(III) ions of three samples of mesoporous silicas functionalized with phosphonic groups????Si(CH₂)₂P(O)(OH)₂ were studied. It was found that for the sample synthesized by spray-drying using OTAB as a template both sorption and desorption rate of Dy³⁺ ions is high, due to the defined porosity of the sorbent. Sorption of Dy³⁺ ions by bridged silsesquioxane xerogels with disordered structure is significantly hindered by diffusion processes, due to the chaotic packing of globules. Using a model for the chemical reactions, the composition of dysprosium(III) complexes with surface phosphonic groups were determined, and their formation constants were calculated. It was shown that xerogels with higher surface concentration of ligand groups (L), can form complexes DyL₃ and DyL₄ ^?. Meanwhile, the sample synthesized by spray-drying method forms only DyL₂ ⁺ and DyL₃ complexes. For this sample, complexes DyL₃ are more stable than for xerogels. So, mesoporous silica derived by spray-drying method, with defined spatial porosity and relatively low surface concentration complexation groups, is characterized by the best sorption properties towards dysprosium(III) (adsorption and desorption kinetics, the value of the static sorption capacity).     

Metal ions directed self-assembly based on rigid polycarboxylate ligand 5-tert-butyl isophthalic acid and flexible N-heterocyclic ligand 1,4-bis(2-methylimidazol-1-ylmethyl)-2,3,5,6-tetramethylbenzene

Two new complexes {[Cd(bmimx)_0.5(tbip)(H₂O)] · H₂O}_n (1) and [Zn(bmimx)(tbip)]_n (2) (bmimx = 1,4-bis(2-methylimidazol-1-ylmethyl)-2,3,5,6-tetramethylbenzene, H₂tbip = 5-tert-butyl isophthalic acid) based on mixed ligands have been hydrothermally synthesized by varying the metal ions. Structural analysis reveals that complex 1 displays a 2D layer structure with a 4⁴-sql topology; complex 2 exhibits a 3D 4-fold interpenetrated framework with sra topology. The structural differences between 1 and 2 indicate that metal ions have significant effects on the formation of the final architectures. In addition, the thermal stabilities and photoluminescent properties of the two complexes were also investigated.     

The novel polymeric potassium complex with a new coordination mode of orotic acid [K(μ5-H2Or)(μ-H2O)]n: Synthesis and structural characterization

Novel polynuclear seven-coordinated potassium complex, [K(μ₅-H₂Or)(μ-H₂O)]_n(H₃Or = orotic acid), with the new coordination mode of orotic acid has been prepared and characterized by elemental analysis, FT-IR spectra, X-ray diffraction. The orotate ligand exhibits new coordination mode of μ₅-κO, O: κO′, O′: O″ for H₂Or⁻.     

Hydrothermal syntheses,structures and luminescent properties of group IIB metal coordination polymers based on bifunctional 1H-tetrazolate-5-acetic acid ligand

Hydrothermal reaction of 1H-tetrazolate-5-ethyl acetate (Htzea), MCl₂ (M = Zn, Cd) and NaOH at different reaction temperatures produced three new coordination polymers: 2-D layered polymer [Zn(tza)(H₂O)₂]_n 1, and 1-D chained supramolecular isomers 2 and 3 formulated as [Cd(tza)(H₂O)₂]_n (H₂tza = 1H-tetrazolate-5-acetic acid), respectively. In these obtained polymers, tza^2? ligand adopts variable coordination modes: μ₃-κN3:κO1:κO2,N1 and μ₃-κN1:κN3:κO2 for 1, and μ₃-κN2:κN1,O2:κO1,O2 for 2 and 3. The effects of reaction temperature and metal centers on the final polymeric frameworks have been discussed. Polymers 1–3 exhibit blue photoluminescence mainly arising from intraligand transitions of tetrazolate rings in tza^2? ligand.     

Surface modification of bioceramics by grafting of tailored allyl phosphonic acid

Abstract

A new route to interfacial bonding between ceramic and matrix in biocomposites is identified. A tailored allyl phosphonic acid is used as a coupling agent bound to the surface of a bioceramic to form a 'grafted' calcium phosphate (CAP). The allyl phosphonic acid coupling agent is synthesised by reaction of allyl halide and trialkyl phosphite. Successful synthesis was confirmed by nuclear magnetic resonance and Fourier transform infrared spectroscopy (FTIR). The allyl phosphonic acid was incorporated onto calcium phosphate using a wet chemical coprecipitation synthesis route. The resulting 'grafted' CAP was characterised using FTIR coupled with photoacoustic sampling, and Fourier transform Raman spectroscopy (FTR). The spectroscopic data suggest an interaction between the allyl phosphonic acid and calcium phosphate resulting from observed reductions in intensity of the hydroxyl (3570 cm^?1) and phosphate ν ₃ (1030 cm^?1) peaks. The continued presence of C=C functionality on the surface of the grafted CAP was indicated by FTIR and FTR spectra (peaks at 1650 and 1635 cm^?1 respectively) and confirmed by X-ray photoelectron spectroscopy (XPS). On the basis of these results, it is concluded that grafted CAP may be used to produce a chemically bonded composite with superior mechanical properties.     

Synthesis of organosiloxane-based inorganic/organic hybrid membranes with chemically bound phosphonic acid for proton-conductors

Proton conductive inorganic-organic hybrid membranes were synthesized from 3-glycidoxypropyltrimethoxysilane (GPTMS) and phosphonoacetic acid (PA) with various ratios by a sol-gel process. Self-standing, homogeneous, highly transparent membranes were synthesized. TG-DTA analyses indicated that these membranes were thermally stable up to 200 °C. The results of FT-IR and ¹³C NMR revealed that phosphonic acid groups of PA were chemically bound to organosiloxane network as a result of reaction between PA and GPTMS. The leach out of phosphonic acid groups from GPTMS-PA to water was reduced compared with phosphoric acid groups from GPTMS-H₃PO_4. The proton conductivity of the hybrid membranes increased with phosphonic acid content. The conductivity of GPTMS/PA with a 1/1.05 ratio at 130 °C was 8.7 × 10⁻² S cm⁻¹ at 100% relative humidity (RH).     

Encapsulation of unique anionic carboxylic acid/water cluster chains into channels of a three-dimensional cationic framework

The hydrothermal reactions of CuCl with 1,3-bis(4-pyridyl)propane (bpp), 1,3-benzenedicarboxylic acid (1,3-H₂bdc), and KOH in water afforded {[Cu₈Cl₄(bpp)₈][(1,3-Hbdc)₄(H₂O)_9.5]}_n (1). Single-crystal X-ray diffraction revealed that 1 has anionic [(1,3-Hbdc)₄(H₂O)_9.5]_n^4n? water cluster chains that are encapsulated into the 1D channels of a 3-D [Cu₈Cl₄(bpp)₈]_n⁴ⁿ⁺ cationic framework. The thermal and luminescent properties of 1 in the solid state were also investigated.     

An effect of hydration entropy on adsorption of various alkylammonium ions at the mercury/water interface

The adsorption of various alkylammonium cations was investigated by measurement of the interfacial tension. Tetraethanolammonium ions (HOC₂H₄)₄N⁺ showed weaker adsorbability than that expected from its ionic radius. The adsorbabilities (relative surface excess of cation FΓ₊ and charge of specifically adsorbed cation q¹₊) of the ethyl series (C₂H₅)_nH_4?nN⁺(n = 0 ≈ 4), and of the methyl series (CH₃)_nH_4?nN⁺n = 0 ≈ 3) were directly proportional to the hydration enthalpies of these cations - ΔH⁰_h, but the proportionalities were different between the methyl and the ethyl series. A linear relation was, however, found between FΓ₊ and the hydration entropies - ΔS⁰_h without regard to the kinds of cations. A similar relation was also found between q¹₊? - ΔS⁰_h. In conclusion, the adsorbabilities of these cations were governed by the hydration entropy, not by the hydration enthalpy.     

A puckered 2D copper coordination polymer with dimensions 14.91×12.63 Å

The polymeric complex [Cu(spcp)₂(H₂O)]_n·(H₂O)_2n (spcp⁻=4-sulfanylmethyl-3-phenylcarboxylate pyridine) with puckered grids of dimensions 14.91×12.63 Å was obtained in the reaction of the Cu(OAc)₂·5H₂O with Na(spcp) by solvothermal method.     

Ionic liquid crystals from β-diketonyl containing pyridinium cations and tetrachlorozincate anions

In this work, an approach towards ionic liquid crystals is strategically designed. A pyridine group has been attached to an 1,3-diketone containing an alkyloxyphenyl R substituent (R = C₆H₄OC_nH_2n+1; n = 10–18) and protonated with hydrochloric acid towards the formation of the chloride salts of 2-[3-(4-n-alkyloxyphenyl)propane-1,3-dion-1-yl]pyridinium cations [OO^R(n)py]Cl (I), which have been proved to be non-mesomorphic. Reaction of these organic–inorganic compounds (I) with ZnCl₂ yields to the ionic liquid crystals of the type bis{2-[3-(4-n-alkyloxyphenyl)propane-1,3-dion-1-yl]pyridinium}tetrachlorozincate [OO^R(n)py]₂[ZnCl₄] (II).The crystalline structure of compounds [OO^R(12)py]Cl and [OO^R(10)py]₂[ZnCl₄] as representative examples of both kinds of salts have been solved and discussed. Both compounds exhibit layered structures containing cationic and anionic sublayers. In addition for the tetrachlorozincate salt [OO^R(16)py]₂[ZnCl₄] structural relationships between the mesophases and the crystalline phase are proposed on the basis of the variable-temperature small-angle X-ray diffraction studies.     

Synthesis of proton conductive membranes based on inorganic–organic hybrid structure bound with phosphonic acid

Proton conductive inorganic–organic hybrid membranes were synthesized from styrene derivatives of alkoxysilane and ethyl 2-[3-(dihydroxyphosphonyl)-2-oxopropyl] acrylate (EPA) through copolymerization followed by sol–gel reaction. Self-standing, homogeneous and transparent hybrid membranes with chemically bound phosphonic acid groups were synthesized. FT-IR analysis exhibited the hybrid membranes included phosphonic acid groups. ¹³C and ²⁹Si NMR studies indicated that alkoxysilyl functionalized styrene derivatives were not only copolymerized with EPA but also condensed yielding Si–O–Si linkages by sol–gel reaction. TG–DTA analysis revealed that these membranes were thermally stable up to 200 °C in dry O₂. The proton conductivities of the hybrid membranes increased with phosphonic acid content and temperature. The P/Si ratio of the membrane was dependent on the number of alkoxy group in the starting alkoxysilane. The hybrid membrane from (dimethylmethoxysilylmethyl)styrene (DMMSMS(M))/EPA = 1/6 revealed proton conductivities of 6.3 × 10⁻³ and 2.4 × 10⁻⁴ S cm⁻¹ at 68.0% relative humidity and 18.8% relative humidity, respectively, at 140 °C.     

Controlling phosphonic acid substitution degree on proton conducting polyphosphazenes

This paper is to describe the development of a synthetic strategy for the preparation of phosphonic acid functionalized poly(aryloxyphosphazene) membranes with different substitution degree of phosphonic acid. Synthesized polymers have been characterized by standard spectroscopic techniques; FT-IR, ¹H, ³¹P and ¹⁹F NMR and element analysis. Proton conductivities of phosphonic acid substituted polymers have been investigated with impedance spectroscopy at different temperatures. Furthermore, the correlations of the proton conductivity and ion exchange capacity with the substitution degree of phosphonic acid have also been investigated. Thermal properties and water uptake properties of the polymers are also investigated. It is found that the proton conductivity and initial decomposition temperature of the polymers increases up to an appropriate amount of phosphonic acid substitution degree, which can be a useful PEM candidate for fuel cells.     

Structures and photoluminescence of coordination polymers assembled from bifunctional ligand containing both tetrazole and imidazole groups

Three new coordination polymers, namely, {[Cu₂(IPT)(SO₄)(OH)(H₂O)]·H₂O}_n (HIPT = 5-(4-(1H-imidazol-1-yl)phenyl)- 1H-tetrazolate, 1), {[Cd₂(IPT)(NPA)(OH)]·H₂O}_n (H₂NPA = 5-nitroisophthalic acid, 2), and {[Zn₂(IPT)(IDC)(H₂O)]·3H₂O}_n (H₃IDC = 1H-imidazole-4,5-dicarboxylic acid, 3), were assembled from a bifunctional organic ligand containing both tetrazole and imidazole groups with/without the aid of carboxylate coligands. Compound 1 possesses 2D structure built by 1D [Cu₂(IPT)(SO₄)(OH)]_n secondary building blocks and IPT⁻ linkers. The 2D networks are linked into 3D supramolecular framework via water chains in helical conformation. Compound 2 displays 3D pillar-layer framework with 2D layers based on tetranuclear Cd(II) SBUs and NPA^2 − pillars. Compound 3 exhibits a 3D framework constructed from the interconnection of 1D [Zn-IDC]_n chains and binuclear Zn₂(IPT)₂ rings. The thermal stabilities of porous compound 3 and luminescent properties of compounds 2 and 3 have also been studied in detail. They exhibit intense solid-state fluorescent emissions at room temperature.     

Coordination assemblies of CdII/ZnII/CoII with the 3-(pyridin-4-yl) benzoate tecton: Structural diversity and properties

Three novel coordination polymers{[CdL₂(HL)(H₂O)]·(H₂O)}_n (1), [Zn₂(OH)L₃]_n (2) and [CoL₂(H₂O)]_n (3) have been hydrothermally synthesized from M(NO₃)₂·nH₂O (M^II = Cd^II, Zn^II and Co^II) and an unsymmetrical tecton 3-(pyridin-4-yl) benzoic acid (HL). All complexes show interesting structural patterns, namely, unprecedented 1D double-stranded supramolecular clasp for 1, novel (3,5,6)-connected helical tubular double layer for 2, 2-fold interpenetrating cds network for 3. The fluorescent and thermal properties of complexes 1, 2 and/or 3 have also been investigated.     

1D Coordination Polymer from Tetraaza Macrocyclic Nickel(II) Complex and 1,2,3,4-Cyclobutanetetracarboxylic Acid

The self assembly of [Ni(L)]Cl₂·2H₂O (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo[14,4,0^1.18,0^7.12]docosane) and 1,2,3,4-cyclobutanetetracarboxylic acid (H₄cbtc) acid generates a 1D coordination and 2D hydrogen-bonded polymer [Ni(L)(H₂cbtc)₂·3H₂O] _n (1). Complex 1 is characterized by X-ray crystallography, spectroscopy and magnetic susceptibility. Each nickel(II) ion has a distorted octahedral coordination environment with the four secondary amines of the macrocycle in which two carboxylate anions of the H₂cbtc^2? ligand have assembled around each nickel center. The compound crystallizes in the triclinic system P-1 with a = 9.715(3) Å, b = 12.891(5) Å, c = 13.903(6) Å, α = 72.64(2)°, β = 75.70(3)°, γ = 73.27(3)°, V = 1566.6(10) ų, Z = 2. The electronic spectrum of 1 indicates a high-spin octahedral environment. The magnetic behavior of 1 reveals a weak intramolecular antiferromagnetic interaction with J = ?1.23(1) cm^?1.     

Preparation of new heteronuclear (NH4)RE[FeII(CN)6]·nH2O complexes (RE = La,Ce, Pr,Nd, Sm,Gd, Dy,Y, Er,Lu) and their low-temperature decomposition for perovskite-type oxide

New heteronuclear (NH₄)RE^III[Fe^II(CN)₆]·nH₂O complexes (RE = La, Ce, Pr, Nd, Sm, Gd, Dy, Y, Er, Lu) were synthesized and their thermal decomposition products were investigated. The crystal structure of (NH₄)RE[Fe^II(CN)₆]·nH₂O would be a hexagonal unit cell (space group: P6₃/m), which was the same as that of La[Fe^III(CN)₆]·5H₂O. The hydration number n = 4 was estimated by TG results for all the RE complexes. The lattice constants depended on the ionic radius of the RE³⁺ ion for the heteronuclear complexes. The single phase of the perovskite type materials was directly obtained by decomposition of the heteronuclear complexes for RE = La, Pr, Nd, Sm, and Gd. A mixture of CeO₂ and Fe₂O₃ was formed for RE = Ce because of its oxidation to Ce⁴⁺. In the case of RE = Dy, Y, Er, and Lu complexes, the perovskite type materials formed at higher temperature via. mixed oxides such as RE₂O₃ and RE₄Fe₅O₁₃ due to the small RE³⁺ ionic radius.     

Reaction between the diaqua form of cisplatin and 2-methylsulfanylphenylphosphonic acid yields a dinuclear phosphonato-bridged complex via NH3 elimination

Reaction between cis-[Pt(NH₃)₂(H₂O)₂]²⁺ and (2-methylsulfanyl)phenyl phosphonic acid (H₂mspp) did not yield the expected cis-diammine [(2-methylsulfanylphenyl)phosphonato]platinum(II) but the dimeric compound [{Pt(mspp)(NH₃)}₂]·6H₂O in which the dianionic mspp²⁻ ligand acts both as chelator and bridging ligand. Thus, the high trans-effect of the sulfanyl group apparently leads to elimination of one NH₃ ligand. An X-ray crystal structure analysis of the dimeric complex is reported.     

Construction of two 2D 3d-4f coordination complexes based on the linkages of left-and right-handed helical chains

Two transition-lanthanide metal-organic coordination polymers, {[CoLn₂(Himdc)₂(SO₄)₂(H₂O)₄]·H₂O}_n [Ln = Yb (1), Ho (2)] (H₃imdc = imidazole-4, 5-dicarboxylic acid), have been synthesized by the hydrothermal reactions of lanthanide oxides, CoSO₄·7H₂O, H₃imdc and H₂O. Single-crystal X-ray diffraction analysis reveals that the isostructural complexes 1 and 2 possess unusual 2D wave-like heterometallic layers with 1D (Ln₂O₂CoO₂)_n and [Ln₂(SO₄)₂]_n inorganic chains constructed by the assembly of 1D left-/right-handed helical L–Ln₂Co–L (L = Himdc) chains and SO₄^2? anions, while a 3D framework is formed via hydrogen-bonding interactions interlayer.     

Syntheses,crystal structures and luminescence properties of lanthanide coordination polymers involving in situ C–S bond cleavage of (4-pyridylthio)acetic acid

Lanthanide coordination polymers with the formula [Ln₂(C₂O₄)₃(H₂O)₆]_n (1) (Ln = Nd, 1) and [Ln₂(C₂O₄)₃(pythioH)₂(H₂O)₂]_n (Ln = Eu 2; Dy 3; Er 4) pythio = 4-pyridinethiolate) were synthesized by treating Ln^III nitrates with (4-pyridylthio)acetic acid under hydrothermal conditions. Single-crystal X-ray diffraction studies indicate that these lanthanide coordination polymers consist of extended oxalate-bridged two-dimensional layer structure. Interestingly, in situ C–S bond cleavage occurred and (4-pyridylthio)acetic acid was transformed into 4-pyridinethiolate and oxalate. The complexes 2 and 3 display strong fluorescent emission in the solid state at room temperature.