Calorimetric study of block-copolymers of poly(n-butyl acrylate) and gradient poly(n-butyl acrylate-co-methyl methacrylate)

The nanophase separation in diblock and triblock copolymers consisting of immiscible poly(n-butyl acrylate) (block A) and gradient copolymers of methyl methacrylate (MMA) and n-butyl acrylate (nBA) (block M/A) were investigated by means of their heat capacity, C_p, as a function of the composition of the blocks M/A and temperature. In all copolymers studied, both blocks are represented by their C_p and glass transition temperature, T_g, as well as the broadening of the transition-temperature range. The low-temperature transition of the blocks A is always close to that of the pure poly(n-butyl acrylate) and is independent of the analyzed compositions of the block copolymer, but broadened asymmetrically relative to the homopolymer due to the small phase size. The higher transition is related to the glass transition of the copolymer block of composition M/A. Besides the asymmetric broadening of the transition due to the phase separation, it decreases in T_g and broadens, in addition, symmetrically with increasing acrylate content. The concentration gradient is not able to introduce a further phase separation with a third glass transition inside the M/A block.     

Preparation of functional poly(acrylates and methacrylates) and block copolymers formation based on polystyrene macroinitiator by ATRP

The polymerization by ATRP of hydroxy and amino functional acrylates and methacrylates with tert-butyldimethylsilyl (TBDMS) or tert-butyloxycarbonyl (BOC) protective groups has been studied for the first time achieving high control over molecular weight and polydispersity. Detailed investigation of the ATRP of 2-{[tert-butyl(dimethyl)silyl]oxy}ethyl acrylate (M2b) in bulk and 2-[(tert-butoxycarbonyl)amino]ethyl 2-methylacrylate (M3a) in diphenyl ether (DPE) showed that the type of ligand plays an important role on either the polymerization rate or the degree of control of the polymerization. Among the ligands used, N,N,N,′N″N″-pentamethyl diethylenetriamine (PMDETA) was the most suitable ligand for ATRP of all functional acrylates and methacrylates. The kinetics of M2b and M3a polymerization using PMDETA as a ligand was reported and proved the living character of the polymerization. Well-defined block copolymers based on a halogen terminated polystyrene (Pst) macroinitiator and the functional acrylate and methacrylate monomers were successfully synthesized by ATRP, and subsequent deprotection of the protective groups from the acrylate or methacrylate segment afforded amphiphilic block copolymers with a specific solubility behavior.     

Synthesis and characterization of biodegradable polylactides and polylactide-block-poly(Z-lysine) copolymers

The reaction of (R,R)-trans-1,2-bis(2,4,6-triisopropylbenzenesulfonamidato)cyclohexane (^RRTBSC-H₂, 1) with MN[Si(CH₃)₃] in tetrahydrofuran (THF) produces [(^RRTBSC)₂M₄(THF)₄] (2: M = Li, 3: M = Na, 4: M = K). Experimental results show that all three complexes 2-4 are active toward the ring-opening polymerization of l-lactide and compound 2 efficiently catalyzes the polymerization of l-lactide in the presence of a variety of alcohols in a controlled fashion with very narrow polydispersity index. In addition, a variety of biodegradable poly(l-lactide)-block-poly(N_ξ-carbobenzyloxy-l-lysine) block copolymers with different ratios have also been synthesized using poly(l-lactide) containing amino chain end (PLLA-NH₂) as a macroinitiator.     

Synthesis and properties of optically active substituted polyacetylenes having carboxyl and/or amino groups

Polyacetylenes having carboxyl and/or amino groups in the side chain were synthesized by the polymerization of N-(2-propynyloxycarbonyl)-l-alanine (1) and l-alanine N-propargylamide (2) catalyzed with a rhodium cation complex. Poly(1_0.5-co-2_0.5) exhibited a larger CD signal than the homopolymers. The polymer mixtures obtained by the polymerization of 1 in the presence of poly(2), and those obtained by the polymerization of 2 in the presence of poly(1) showed specific rotations larger than calculated. The polymerization of propargylamine in the presence of poly(1) did not exhibit significant effect, while the polymer mixtures obtained by the polymerization of propiolic acid in the presence of poly(2) exhibited [α]_D of positive sign, although poly(2) alone exhibited [α]_D of negative sign.     

Synthesis and characterization of side-chain liquid crystalline homopolymers and block copolymers containing biphenyl-4-ylthiophene and biphenyl-4-ylfluorene pendants

A series of new liquid crystalline homopolymers (P1 and P2) and block copolymers (P3 and P4) composed of methacrylates containing pendant biphenyl-4-ylthiophene (M1) and biphenyl-4-ylfluorene (M2) units were synthesized by atom transfer radical polymerization (ATRP). The number-average molecular weights (M_n) of the homopolymer (P2) and diblock copolymers (P3 and P4) were in the range of 5153-8713 g mol⁻¹ with polydispersity indices (PDIs) between 1.17 and 1.25. The thermal, mesogenic, and photoluminescence (PL) properties of all polymers were investigated. Except for the absence of mesogenic properties in block copolymer P4, polymers P1 and P3 possessed the smectic A phase and polymer P2 exhibited the nematic phase. Moreover, the mesomorphism and the layer d-spacing values of the smectic A phase in polymers P1 and P3 were confirmed and characterized by X-ray diffraction (XRD) patterns.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Synthesis and ionic transport of sulfonated ring-opened polynorbornene based copolymers

The N-pentafluorophenyl-exo-endo-norbornene-5,6-dicarboximide (1a) and N-phenyl-exo-endo-norbornene-5,6-dicarboximide (1b) monomers were synthesized and copolymerized via ring opening metathesis polymerization (ROMP) using bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride (I) and tricyclohexylphosphine[1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene][benzylidene]ruthenium dichloride (II). Experiments, at distinct monomer molar ratios, were carried out using catalyst I in order to determine the copolymerization reactivity constants by applying the Mayo-Lewis and Fineman-Ross methods. Moreover, both catalysts were used to produce random and block high molecular weight copolymers of 1a with 1b and 1a with norbornene (NB) which were further hydrogenated using a Wilkinson’s catalyst. Then, the saturated copolymers underwent a nucleophilic aromatic substitution by reacting with sodium 4-hydroxybenzenesulfonate dihydrate to generate new polynorbornene ionomers bearing fluorinated pendant benzenesulfonate groups. A thorough study on the electrochemical characteristics involving electromotive forces of concentration cells and proton conductivity of cation-exchange membranes based on a block copolymer of norbornene dicarboximides containing structural units with phenyl and fluorinated pendant benzenesulfonate moieties is reported. The study of electromotive forces (emf) of concentration cells with the sulfonated membrane of copolymer 8 separating electrolyte solutions of different concentration indicate that the membranes exhibit high permselectivity to protons and sodium ions at moderately low concentrations. In principle, these results suggest that the membranes can be considered candidates for ionic separation applications.     

Metallocene-catalyzed synthesis of polyethylenes with side-chain triarylamines: Effects of catalyst structure and triarylamine functionality

The copolymerization of ethylene with 8-triarylamine (TAA) substituted 1-octene monomers (TAA = triphenylamine (M1), N,N-diphenyl-m-tolylamine (M2), N,N-diphenyl-1-naphthylamine (M3)) using various types of group 4 single-site catalytic systems (Cp₂ZrCl₂ (C1), rac-EBIZrCl₂ (C2), rac-SBIZrCl₂ (C3), i-PrCpFluZrCl₂ (C4), Me₂Si(η⁵-C₅Me₄)(η¹-N-^tBu)TiCl₂ (C5)) was investigated to prepare functionalized polyethylene with side-chain TAA groups. The metallocene/methylaluminoxane (MAO) catalytic systems (C1-C4) efficiently lead to the production of high-molecular-weight poly(ethylene-co-M1). While the C4/MAO catalytic system shows the highest comonomer response, the C5/MAO system exhibits the poor compatibility with the M1 comonomer. Copolymerization results of ethylene with M1-M3 using C4/MAO indicate that M1-M3 are well tolerated by both the cationic active species of C4 and MAO cocatalyst, giving rise to the copolymers with high levels of activity and molecular weight. Inspection of the aliphatic region of the ¹³C NMR spectra of the copolymers (P1-P3) having ca. 11 mol% of M1-M3, respectively, reveals the presence of isolated comonomer units with prevailing [EEMEE] monomer sequences in the polymer chain. UV-vis absorption and PL spectra exhibit an apparent low-energy band broadening for P1 and P2 indicative of intrachain aggregate formation. Whereas P2 and P3 undergo completely reversible one-electron oxidation process, P1 shows relatively poor oxidational stability.     

Anionic polymerization of 2-haloethyl methacrylates

The anionic polymerizations of 2-chloroethyl methacrylate (1), 2-bromoethyl methacrylate (2), and 2-iodoethyl methacrylate (3) were carried out in THF at −78 °C with 1,1-diphenyl-3-methylpentyllithium in the presence of LiCl. The polymerizations proceeded in a controlled manner to quantitatively afford polymers with predictable molecular weights and narrow molecular weight distributions. Under similar conditions, the anionic block copolymerizations by the sequential addition of methyl methacrylate (MMA) followed by 1, 2, and 3 generated the corresponding diblock copolymers with well-defined structures. On the other hand, in the block copolymerization by the reverse addition of monomer, a well-defined diblock copolymer, poly(1)-block-PMMA, could be synthesized only by the sequential addition of 1 followed by MMA, whereas the block copolymerizations using 2 and 3 were not successful because of instabilities of the propagating chain-end anions derived from 2 and 3. The side reactions which occurred during the polymerization were discussed.     

Characterization of aqueous micellar solutions of amphiphilic block copolymers of poly(acrylic acid) and polystyrene prepared via ATRP. Toward the control of the number of particles in emulsion polymerization

A series of diblock, triblock and star-block copolymers composed of polystyrene and poly(acrylic acid) were synthesized by ATRP. The structure of the copolymers, the size of the blocks and the composition were varied, keeping however a short polystyrene block and a poly(acrylic acid) content larger than 60 mol% to allow solubility in alkaline water. Their micellization was studied by static and dynamic light scattering and the influence of their structural characteristics on the aggregation number, N_agg, was examined at low salt concentration and alkaline pH. It was shown that micelles were in thermodynamic equilibrium and that N_agg followed the power law N_agg∼N_A^−0.9N_S² (with N_A, the total number of acrylic acid units in the copolymer and N_S, the total number of styrene units), that is characteristic of amphiphile micelles formed from strongly segregated block copolymers. Moreover, N_agg was independent of salt concentration in the investigated range. The same copolymers were previously used as stabilizers in emulsion polymerization [Macromolecules 34 (2001) 4439]. The final latex particle concentration, N_p, was compared with N_m, the initial micelle concentration. This enabled us to conclude that among the block copolymers studied, those with high acid content behaved like low molar mass surfactants. In contrast, those with low acid content formed stable micelles that could be directly nucleated to create latex particles, allowing a good control over N_p.     

Bridge length effect of new dinuclear constrained geometry catalysts on controlling the polymerization behaviors of ethylene/styrene copolymerization

According to the observable evidence from ¹H and ¹³C nuclear magnetic resonance and mass spectrometry, new dinuclear constrained geometry catalysts (DCGCs) with a structure of [{Ti(η⁵:η¹-(C₉H₅)Si(CH₃)₂N^tBu)Cl₂(CH₂)_n}₂(C₆H₄)] [n = 0 (10), n = 1 (11), n = 2 (12)] were synthesized successfully. Copolymerization of ethylene and styrene were tested by using three new DCGCs and Dow CGC. The catalyst activity, the molecular weight (MW) and styrene content of the copolymers were sharply improved as the bridge structure was transformed from para-phenyl (10) to para-xylyl (11) and para-diethylenephenyl (12). The activity of 11 and 12 was about four to five times greater than that of 10 regardless of the polymerization conditions. In addition, the capability to form high MW polymers increased in the order of Dow CGC ≈ 10 < 11 < 12. The styrene contents in copolymers generated by 11 and 12 were higher than those of 10.     

Radical polymerization of butyl acrylate and random copolymerization of styrene and butyl acrylate and styrene and methyl methacrylate mediated by monospiro- and dispiropiperidinyl-N-oxyl radicals

Radical polymerization of butyl acrylate (BA) and random copolymerizations of styrene (St) and BA and St and methyl methacrylate (MMA) in the presence of 7-aza-15-hydroxydispiro[5.1.5.3]hexadecane-7-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxyspiro[5.6]dodecane-1-yloxyl (2) were carried out. Radical polymerization of BA at 120 °C in the presence of 1 gave poly(BA) with M_n=20200 and M_w/M_n=1.30 at 23% conversion. The termination of polymerization observed around ∼20% conversion was solved to a certain extent by an addition of small amounts of dicumyl peroxide, and poly(BA) with M_n=37400 and M_w/M_n=1.33 was obtained in 46% yield. Random copolymerizations of St and BA and St and MMA in the presence of 1 and 2 at 80 °C gave the corresponding random copolymers with narrow polydispersities of 1.12-1.38 at the molar fraction above 0.30 of St in feed. The kinetic study for the NO-C bond homolysis of the corresponding alkoxyamines prepared from 1 and 2 were carried out, and evaluation of the preexponential factors (A_act) and the activation parameters (E_act) showed that the steric factors of the nitroxides are reflected mainly on E_act.     

Geometrical influence of ABn monomer structure on the thermal properties of linear-hyperbranched ether-ketone copolymers prepared via an AB+ABn route

A series of poly(ether ketone) copolymers were prepared by nucleophilic aromatic polymerization reactions of 4-fluoro-4′-hydroxybenzophenone, 2, in the presence of varying percentages of AB_n monomers based on a triarylphosphine oxide platform, 1a (2F), 1b (4F), and 1c (6F), where A=OH and B=F. As expected, the crystallinity of the samples decreased with an increasing AB_n content. However, the tetrahedral geometry of the phosphine oxide-based AB_n monomers proved to be much more efficient at lowering the melt temperature of the copolymers than was the corresponding ketone-based AB_n monomer, 3,5-bis(4-fluorophenylbenzoyl)phenol, 4, that possesses a structure more similar to that of 2. Polymerization of 2 in the presence of as little as 5 mol% of bis-(3,4,5-trifluorophenyl)-(4-hydroxyphenyl)phosphine oxide, 1c (6F), afforded a completely amorphous polymer with a glass transition temperature of 168 °C that was soluble in hot NMP and DMSO. The copolymers also exhibited excellent thermoxidative stability with a number of samples displaying 5% weight loss temperatures, in air, well in excess of 500 °C.     

‘Living’ radical polymerization of styrene mediated by spiro ring-substituted piperidinyl-N-oxyl radicals. The effect of the spiro rings on the control of polymerization

The bulk radical polymerizations of styrene (St) at 80-120 °C in the presence of 6-aza-7,7-dimethyl-9-hydroxyspiro[4.5]decane-6-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxy[5.5]undecane-1-yloxyl (2) were studied. At 100 and 120 °C, the polymerizations were well controlled by those nitroxides to give poly(St)s with narrow polydispersities. On the other hand, the polymerization mediated by 2 at 80 °C showed a good ‘livingness’ of polymerization, but 1 had a poor ability to control the polymerization to give poly(St) with a broad polydispersity of 1.52. The rate constants (k_act) for the homolysis of the NO-C bond of the alkoxyamines prepared from 1 and 2 were measured at 333-373 K, and the A_acts and E_acts values were determined to be 2.8×10¹³ s⁻¹ and 128 kJ mol⁻¹ (1) and 4.0×10¹³ s⁻¹ and 125 kJ mol⁻¹ (2), respectively, from the Arrhenius plots. These results are compared with those for the structurally related piperidinyl-N-yloxyl radicals including TEMPO.     

Initiator efficiency in ATRP: the tosyl chloride/CuBr/PMDETA system

The low efficiency of p-toluenesulfonyl chloride (TsCl) initiator for the polymerization of methyl methacrylate (MMA), when used in conjunction with N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) and CuBr under atom transfer radical polymerization (ATRP) conditions was investigated. A major by-product in the formation of poly(methyl methacrylate) was identified as N,N-dimethyl-p-toluenesulfonamide (5) and accounted for approximately half of the initiator. Compound 5 was shown to form by the direct reaction of PMDETA and TsCl. In a model experiment equimolar amounts of TsCl, PMDETA and CuBr reacted at 80°C in p-xylene resulted in the formation of 5 and two other unsaturated sulfones 2-methyl-3-[(4-methylphenyl)sulfonyl]-2-propenoic acid methyl ester (6) and 2-[[4-methylphenyl)sulfonyl]methyl]-2-propenoic acid methyl ester (7), formed by the dehydrohalogenation and subsequent isomerization of an intermediate chloro-adduct, 1-(4-methylbenzenesulfonyl)-2-chloro-2-(methyl)methyl propionate (2). Molecular modeling predicted the unsaturated sulfone 7 was thermodynamically more stable than the higher conjugated sulfone 6 and this was confirmed by the isomerization of 6 to 7 at room temperature under mild basic conditions. The absence of 6 and 7 in the polymerization of MMA under ATRP conditions showed that in the early stages of polymerization in the presence of excess MMA, the intermediate chloro-adduct 2 is not formed.     

Guest release and solution behavior of a hydrogen-bonding physical micelle during chemoresponsive shell disruption

The guest release and solution behavior during shell disruption of a polymeric nanocapsule are described. Hyperbranched polyethylenimine (PEI, M_n = 10?000) is chemically functionalized with multiple DAD hydrogen-bonding motifs (D and A: hydrogen-bonding donor and acceptor), leading to PEI₂₃₂-(DAD)_x (3) (x = 93 (3a), x = 46 (3b), x = 23 (3c), x = 12 (3d)). Meanwhile, polyethylene oxide (M_n = 2 200) is end-capped with thymine moieties (PEO-ADA) (4). Mixing of the hydrogen-bonding complementary 3 and 4 (DAD/ADA = 1) leads to a physical micelle (3·4) in apolar media, and the resulting micelle can completely and irreversibly transfer the ionic and water-soluble Congo red (CR) into chloroform phase by encapsulation. Experiment proves that the micelle can exist as a pseudo-unimolecular micelle (p-UIM, meaning one PEI in one micelle) or as aggregate, depending on the shell density. As a result, 3b·4 generally exists as a p-UIM while 3d·4 can exist as p-UIM only in a very narrow range of concentrations. The critical aggregation concentration (CAC) is also dependent on the core structure of the micelle, thus when the residual amines in the core of 3b are transformed into amide, the resulting 5b·4 shows a very low CAC. Small chemicals bearing DAD hydrogen-bonding motif can compete to bind with the PEO-ADA shell and destruct the p-UIM, leading to aggregation and precipitation of the p-UIM along with the CRs. Experiment proves that the CR has strong acid-base interaction with the PEI core of the p-UIM, but when the basicity of the PEI core is reduced by amidation, partial CRs can be released into the water phase.     

New amphiphilic fluorescent CBABC-type pentablock copolymers containing pyrene group by two-step atom transfer radical polymerization (ATRP) and its self-assembled aggregation

A series of novel amphiphilic fluorescent CBABC-type pentablock copolymers (Py-PMMA-PEG4600-PMMA-Py) were prepared from BAB-type amphiphilic triblock copolymer (PMMA-PEG4600-PMMA) as macroinitiator with various contents of 1-(methacryloyloxyethylamino-carboxylmethyl) pyrene (PyMOI) by atom transfer radical polymerization (ATRP) in toluene using CuBr/2,2-bipyridine as catalyst system. Triblock copolymer (PMMA-PEG4600-PMMA) was prepared by ATRP and obtained from Br-PEG4600-Br as macroinitiator with methyl methacrylate in tetrahydrofuran using the same catalyst. The molecular weights of pentablock copolymers which were reinitiated by PMMA-PEG4600-PMMA macroinitiator were calculated from ¹H NMR spectra up to 42,400 gmol⁻¹. The polydispersity of pentablock copolymers obtained from GPC analysis was narrow between 1.10 and 1.38. The crystallinity of triblock copolymer (PMMA-PEG4600-PMMA) was decreased slightly with incorporating PMMA segment. Introducing the bulky pyrene substituent into pentablock copolymer, the melting temperature was not observed and all pentablock copolymers showed amorphous patterns in wide-angle X-ray scattering (WAXS) due to decrease in the degree of crystallinity of polymer chain because of disturbing regular packing. The temperatures at 10% weight loss (Td₁₀), examined by TG analysis, showed values ranging from 265 to 323 °C in nitrogen and 264 to 313 °C in air. Fluorescence spectra of Py-PMMA-PEG4600-PMMA-Py exhibited stronger excimer emission at ca. 480 nm due to the aggregations of pyrene group formed via interaction of the hydrophobic chains. The more content of PyMOI segment in pentablock copolymers can obtain the higher emission intensity ca. 480 nm. When there were higher PyMOI contents (84.9 wt% PyMOI) in pentablock copolymers, they formed larger aggregates (210 nm) in SEM micrographs. On the other hand, while increasing the concentration of the polymer solution in THF, the morphology was changed from spherical (0.1 mg/mL) to chainlike (1.0 mg/mL) aggregates.     

Helical conformation of the copolymers of l-proline derivatives based propargylether and chiral N-propargylamide

The novel acetylene monomers, l-proline derivatives based propargylethers PR (PA, PC, and PL) were synthesized by alkylation of Boc-hydroxyproline with propargyl bromide and acylation of achiral amine. The homopolymers of the novel acetylene monomer exist in no regulated higher order structure in solvents because of the lack of hydrogen bond and the unique ring structure in the pendant. Consequently, the copolymerization of l-proline-derived chiral propargylether PR with the l-alanine-derived N-propargylamide (LA) was formed and the chiroptical properties of the formed copolymers were examined. We conclude that (1) N-H of the amide group at 2-position in proline play an important role in the formation of helical conformation of poly(LA₈₈-co-PR₁₂); (2) improving the amount of PC of poly(LA-co-PC) changes the conformation of the copolymer in CHCl₃ and perturbs the leadership of LA; (3) the conformation of poly(LA₇₅-co-PC₂₅) remarkably changes with changing temperature and PC obtains the leadership in the competition on the conformation of poly(LA₇₅-co-PC₂₅) in CHCl₃ with the improvement of temperature.     

Synthesis and gas permeability of new polynorbornene dicarboximide with fluorine pendant groups

The new exo-N-3,5-bis(trifluoromethyl)phenyl-7-oxanorbornene-5,6-dicarboximide (TFmPhONDI, 2), was synthesized and polymerized via ring opening metathesis polymerization (ROMP) using tricyclohexylphosphine [1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazolilydene][benzylidene] ruthenium dichloride (I) to produce the corresponding PTFmPhONDI (3). Gas permeability, diffusion and solubility coefficients of PTFmPhONDI (3) were determined by transient permeation for five gases He, CO₂, O₂, N₂ and CH₄. The larger gas permeability and diffusion coefficients of 3 compared to polynorbornene dicarboximides without fluorine pendant groups were attributed to a lower polymer chain packing due to the effect of the CF₃ groups in the lateral phenyl moiety pending at positions 3 and 5.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.