Side-chain pseudopolyrotaxanes by threading cucurbituril[6] onto quaternized poly-4-vinylpyridine derivative: Synthesis and properties

A novel side-chain pseudopolyrotaxanes 4 is synthesized from cucurbituril (CB[6]) and quaternized poly-4-vinylpyridine derivative 3 in water by simple stirring at room temperature. CB[6] beads are localized on hexamethylene units in side chains of 3 as found by NMR studies, and the hydrophobic and charge-dipole interactions are the driving force. The degree of threading (q/n, the average number of CB[6] beads per repeat recognition unit of 3) can be controlled from 0.2 to 1.0 by controlling the amount of CB[6] added. The reduced viscosity of pseudopolyrotaxanes in aqueous solution has smaller change with the change of the concentration or temperature, which is consistent with the hydrodynamic radius and more rigid chain conformation because of the threaded CB[6]. DLS results show the average hydrodynamic diameter (D_h) of the pseudopolyrotaxanes in solution increases with the increasing of CB[6] threaded. The pseudopolyrotaxanes have higher thermal stability and intensity of absorption band than the parent polymer 3 as found by TGA and UV-vis studies. The decomposition temperature and intensity of absorption increase with increasing amount of CB[6] threaded. The effect of NaI to pseudopolyrotaxanes is studied by the transmittance with UV-vis, and the result shows that NaI is the satisfied precipitant to the pseudopolyrotaxanes.     

A highly selective and sensitive fluorescence chemosensor based on optically active polybinaphthyls for Hg

The chiral polymer was synthesized by the polymerization of 4,7-diethynylbenzo[2,1,3]-thiadiazole (M-1) with (R)-6,6′-dibutyl-3,3′-diiodo-2,2′-bis(diethylaminoethoxy)-1,1′-binaphthyl (R-M-1) via Pd-catalyzed Sonogashira reaction. The chiral polymer has orange fluorescence due to the extended π-electronic structure between binaphthyl unit and benzo[2,1,3]thiadiazole (BT) group via ethynyl bridge. The responsive optical properties of the polymer on various metal ions were investigated by fluorescence spectra. The fluorescence of the chiral polymer can produce the pronounced enhancement as high as 1.8-fold upon addition of 1:2 molar ratio of Hg²⁺. Compared with other cations, such as K⁺, Mg²⁺, Pb²⁺, Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, Zn²⁺, Mn²⁺ and Fe³⁺, Hg²⁺ can produce the pronounced fluorescence response of the polymer. The result indicates this kind of chiral polybinaphthyls incorporating diethylamino and benzo[2,1,3]thiadiazole (BT) moieties as receptors exhibits highly sensitive and selective behavior for Hg²⁺ detection.     

Forgotten monomers: free radical polymerization behavior of norbornadiene derivatives in comparison with methyl methacrylate

The free radical polymerization behavior of three norbornadiene derivatives was studied as a function of their structure. The compounds examined were 3-ethoxycarbonyl-tricyclo[3.2.1.0^2,4]oct-6-ene 1 (liquid), 2-carbethoxybicyclo[2.2.1]-2,5-heptadiene 2 (liquid) and 2-carboxybicyclo[2.2.1]-2,5-heptadiene 3 (solid). They were polymerized in bulk and in benzene solutions. The tricyclic compound 1 was the least reactive monomer whereas the bicyclic derivatives 2 and 3 readily polymerized radically to high conversions. The corresponding polymers were isolated and their structure were determined by means of IR- and NMR spectroscopy. The polymerization of 3-ethoxycarbonyl-tricyclo[3.2.1.0^2,4]oct-6-ene 1 is supposed to proceed through a simultaneous ring opening-ring closing mechanism. The corresponding polymer poly-1 shows low molecular weights. The polymerization results were compared with those obtained for a conventional solution polymerization of methyl methacrylate.     

Electrochemical characterisation of tetra- and octa-substituted oxo(phthalocyaninato)titanium(IV) complexes

The synthesis and electrochemical characterisation of the following oxotitanium tetra-substituted phthalocyanines are reported: 1,(4)-(tetrabenzyloxyphthalocyaninato)titanium(IV) oxide (5a); 1,(4)-{tetrakis[4-(benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide (5b); 2,(3)-(tetrabenzyloxyphthalocyaninato)titanium(IV) oxide (6a) and 2,(3)-{tetrakis[4-(benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide (6b). The electrochemical characterisation of complexes octa-substituted with 4-(benzyloxy)phenoxy (9b), phenoxy (9c) and tert-butylphenoxy (9d) groups is also reported. The cyclic voltammograms of the complexes exhibit reversible couples I-III and couple IV is quasi-reversible for complexes 5a, 5b, 6a and 6b. The first two reductions are metal-based processes, confirmed by spectroelectrochemistry to be due to Ti^IVPc²⁻/Ti^IIIPc²⁻ and Ti^IIIPc²⁻/Ti^IIPc²⁻ redox processes and the last two reductions are ring-based processes due to Ti^IIPc²⁻/Ti^IIPc³⁻ and Ti^IIPc³⁻/Ti^IIPc⁴⁻. Chronocoulometry confirmed a one-electron transfer at each reduction step. The electrochemistry of the above complexes is also compared to the previously reported 5c, 5d, 6c and 6d.     

Synthesis of 1,9-bis[glycidyloxypropyl]penta(1′H,1′H,2′H,2′H-perfluoroalkylmethylsiloxane)s and copolymerization with piperazine

A series of 1,9-bis[glycidyloxypropyl]pentasiloxanes (IV-VI) were prepared by the platinum catalyzed hydrosilylation of 1,9-dihydridodecamethylpentasiloxane (I), 1,9-dihydrido-3,5,7-tris(3′,3′,3′-trifluoropropyl)heptamethylpentasiloxane (II), and 1,9-dihydrido-3,5,7-tris(1′H,1′H,2′H,2′H-perfluorooctyl)heptamethylpentasiloxane (III) with allyl glycidyl ether. Subsequently, IV-VI were copolymerized with piperazine to form high molecular weight copoly(carbosiloxane)s (VII-IX). The structures of the 1,9-bis[glycidyloxypropyl]penta-siloxanes (IV-VI) and copoly(carbosiloxane)s (VII-IX) were determined by ¹H, ¹³C, ²⁹Si, and ¹⁹F NMR as well as IR spectroscopy. The molecular weight distributions (M_w/M_n) of VII-IX have been characterized by gel permeation chromatography and their thermal properties measured by differential scanning calorimetry and thermal gravimetric analysis.     

A highly selective fluorescent sensor for Hg based on the water-soluble poly(p-phenyleneethynylene)

The conjugated polymer P-1 could be synthesized by the polymerization of 4,7-diethynyl-benzo[2,1,3]thiadiazole (M-1) and 1,4-bis[3′-(N,N-diethylamino)-1′-oxapropyl]-2,5-diiodobenzene (M-2) via Pd-catalyzed Sonogashira reaction. The water-soluble conjugated polyelectrolyte P-2 could be obtained by the reaction of P-1 with ethyl bromide. Both P-1 and P-2 can emit orange fluorescence. The responsive optical properties of P-1 and P-2 on Hg²⁺ were investigated by fluorescence spectra. Hg²⁺ can lead to nearly complete fluorescence quenching of P-1. On the contrary, Hg²⁺ can show the most pronounced fluorescence enhancement response of P-2 in aqueous solution without interference from those coexistent ions, such as K⁺, Mg²⁺, Pb²⁺, Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Zn²⁺. The results also exhibit that this kind of water-soluble conjugated polyelectrolyte can be used as a highly sensitive and selective fluorescence sensor for Hg²⁺ detection in water.     

Mechanistic study of electrochemical oxidation of catechols in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of catechols (1a-1c) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a-1c) participate in Michael addition reactions with 3 to form the corresponding benzofuran (or isochromeno[4,3-c]quinoline) derivatives (6a-6c). The electrochemical synthesis of (6a-6c) has been successfully performed in an undivided cell in good yield and purity. The oxidation mechanism was deduced from voltammetric data and by coulometry at controlled-potential. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

Photosensitive poly(benzoxazole) based on precursor from diphenyl isophthalate and bis(o-aminophenol)

A new synthetic method for the preparation of poly(benzoxazole) (PBO) precursor, poly(o-hydroxyamide) (7) from bis(o-aminophenol) (5) and diphenyl isophthalate (6) has been developed. Polymer 7 was prepared by the polycondensation of 5 and 6 in 1-methyl-2-pyrrolidinone (NMP) at 185-205 °C. Model reactions were carried out in detail to elucidate appropriate conditions for the formation of 2-hydroxybenzanilide (3) from o-aminophenol (1) and phenyl benzoate (2). The photosensitive (PBO) precursor based on polymer 7 containing a 22% of benzoxazole unit and 30 wt% 1-{1,1-bis[4-(2-diazo-1-(2H)naphthalenone-5-sulfonyloxy)phenyl]ethyl}-4-{1-[4-(2-diazo-1(2H)naphthalenone-5-sulfonyloxy)phenyl]methylethyl}benzene (S-DNQ) showed a sensitivity of 110 mJ cm⁻² and a contrast of 5.0 when it was exposed to 436 nm light followed by developing with a 2.38 wt% aqueous tetramethylammonium hydroxide solution at room temperature. A fine positive image featuring 8 μm line and space patterns was observed on the film of the photoresist exposed to 200 mJ cm⁻² of UV-light at 436 nm by the contact mode.     

Metallocene-catalyzed synthesis of polyethylenes with side-chain triarylamines: Effects of catalyst structure and triarylamine functionality

The copolymerization of ethylene with 8-triarylamine (TAA) substituted 1-octene monomers (TAA = triphenylamine (M1), N,N-diphenyl-m-tolylamine (M2), N,N-diphenyl-1-naphthylamine (M3)) using various types of group 4 single-site catalytic systems (Cp₂ZrCl₂ (C1), rac-EBIZrCl₂ (C2), rac-SBIZrCl₂ (C3), i-PrCpFluZrCl₂ (C4), Me₂Si(η⁵-C₅Me₄)(η¹-N-^tBu)TiCl₂ (C5)) was investigated to prepare functionalized polyethylene with side-chain TAA groups. The metallocene/methylaluminoxane (MAO) catalytic systems (C1-C4) efficiently lead to the production of high-molecular-weight poly(ethylene-co-M1). While the C4/MAO catalytic system shows the highest comonomer response, the C5/MAO system exhibits the poor compatibility with the M1 comonomer. Copolymerization results of ethylene with M1-M3 using C4/MAO indicate that M1-M3 are well tolerated by both the cationic active species of C4 and MAO cocatalyst, giving rise to the copolymers with high levels of activity and molecular weight. Inspection of the aliphatic region of the ¹³C NMR spectra of the copolymers (P1-P3) having ca. 11 mol% of M1-M3, respectively, reveals the presence of isolated comonomer units with prevailing [EEMEE] monomer sequences in the polymer chain. UV-vis absorption and PL spectra exhibit an apparent low-energy band broadening for P1 and P2 indicative of intrachain aggregate formation. Whereas P2 and P3 undergo completely reversible one-electron oxidation process, P1 shows relatively poor oxidational stability.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Synthesis of novel poly(diphenylacetylene)s with both trimethylsilyl and alkyl groups: The effect of desilylation on gas permeability

Diphenylacetylenes having both a trimethylsilyl group and an alkyl group at para positions [Me₃SiC₆H₄CCC₆H₄R; R = Et (1a), n-Bu (1b), t-Bu (1c), n-C₈H₁₇ (1d)] and having only an alkyl group [PhCCC₆H₄R; R = n-Bu (1B), n-C₈H₁₇ (1D)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2D). The formed polymers except 2c afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of the Si-containing polymer membranes (2a, 2b, 2d) was carried out with trifluoroacetic acid, and the desilylated polymer membranes (3a, 3b, 3d) were obtained. The permeability to O₂, N₂, and CO₂ were determined for the obtained polymer membranes. All the desilylated membranes showed lower gas permeability than the Si-containing counterparts. To clarify the effects of the desilylation further, CO₂ diffusivity, CO₂ solubility, and fractional free volume (FFV) of the polymer membranes were investigated. The FFV and CO₂ diffusivity decreased upon desilylation, while CO₂ solubility hardly varied.     

Cationic phenyl-substituted poly(p-phenylenevinylene) related copolymers with efficient photoluminescence and synthetically tunable emissive colors

A series of amino-functionalized phenyl-substituted poly(p-phenylenevinylene) (PPV) related copolymers were synthesized by Wittig reaction. Their corresponding cationic conjugated polymers were successfully obtained via a post-polymerization approach. On the basis of FT-IR and ¹H NMR spectra, it was found that phenyl-substituted PPV related copolymers containing alkoxylated benzene (neutral polymer P1 and quaternized polymer P1′), phenylated benzene (neutral polymer P2 and quaternized polymer P2′) and fluorene (neutral polymer P3 and quaternized polymer P3′) moieties are of 55, 80, and 45% cis-vinylic linkage respectively while the polymer containing thiophene moiety (neutral polymer P4 and quaternized polymer P4′) is primarily of trans-vinylic linkage. Their photoluminescence (PL) were conveniently tuned from blue color to yellow color by introducing units with different optoelectronic properties into the PPV backbones. The polymer with fluorene unit and bulky phenylene-substituted benzene unit in the backbone exhibited the highest PL efficiency among these neutral and quaternized PPVs. P4′ containing little cis-vinylic linkage showed complete quenching while P1′-P3′ containing much more cis-vinylic linkage showed incomplete quenching, indicating that the quenching behavior of these cationic PPVs may be highly influenced by the content of cis-vinylic linkage in the PPV backbones.     

Spectral properties of chalcone containing triphenylamino structural unit in solution and in polymer matrices

Novel chalcones (3-phenyl-1-phenylprop-2-en-1-ones) substituted on one end (position 3) with electron donating diphenylaminophenyl substituent and on the other end (position 1) with thiophenes with variable electronic effects (CH-1-CH-5) were prepared. The spectral properties of these molecules in solvents such as chloroform, cyclohexane, acetonitrile, methanol and incorporated into polymer matrices of polystyrene (PS), poly(methyl methacrylate) (PMMA) and poly(vinyl chloride) (PVC) were compared with those of 3-[4-(N,N-dimethylamino)-phenyl]-1-phenylprop-2-en-1-one (CH-1m) and 3-[4-(N,N-dimethylamino)phenyl]-1-(4-nitrophenyl)prop-2-en-1-one (CH-2m). The longest wavelength absorption band of model chalcones CH-1m and CH-2m was in the range of 400-420 nm and did not appear to be influenced by the medium. The fluorescence increased with the addition of acetonitrile, while it was effectively quenched in methanol. The strong electron-attracting nitro group quenched the fluorescence of CH-2m in nearly all solvents. In contrast, the fluorescence became more intense when the molecule was incorporated in a polymer matrix. The longest wavelength absorption band of novel chalcones was observed in the range of 410-450 nm in all media. The fluorescence of chalcones was red-shifted to the range of 530-575 nm and was most intense in chloroform. The quantum yield of fluorecence was the highest in chloroform for the chalcone with a methyl-thiophene (0.49) and low for the chalcone with a fluorenyl-thiophene group (0.07). The fluorescence of all chalcones (CH-1-CH-5) was effectively quenched in polar acetonitrile and methanol, and was less intense relative to chloroform when incorporated into a polymer matrix and more intense relative to other solvents. The lifetime of fluorescence was in the range of 1-4 ns. The Stokes shift was in the range of 4000-5000 cm⁻¹ in chloroform, and lower in all other media. The spectral behavior of model chalcones CH-1m and CH-2m and novel chalcones with diphenylamino substituents was similar, producing observable fluorescence in several polymer matrices. The effect of the solvent on the fluorescence is discussed in terms of negative and positive solvatokinetic effects.     

Highly controlled side-chain chromophore orientation in poly[N-1-(1-pyrenyl)ethyl-l-glutamines]

Poly[N⁵-(R and S)-1-(1-pyrenyl)ethyl-l-glutamines] (1 and 2) were prepared by condensation of poly(l-glutamic acid) with optically resolved amines. In solution, these polymers, 2 in particular, gave large circular dichroism (CD) indicative of exciton coupling among the side-chain pyrene chromophores. When compared with the corresponding polymer with achiral side groups, i.e. poly(1-pyrenylmethyl-l-glutamine) (3), 1 and 2 not only gave much stronger CD, but also gave much reduced excimer emission with a significant hypsochromic shift of emission maximum. The highly controlled orientation of the side-chain chromophores is apparently brought about by the specific steric interactions among the bulky chiral side chains along the helical main chain.     

Synthesis and properties of polyacetylenes having pendent phenylethynylcarbazolyl groups

Novel acetylene monomers substituted with phenylethynylcarbazolyl groups, 3-[(4-octylphenyl)ethynyl]-9-propargylcarbazole (1), 3,6-bis[(4-octylphenyl)ethynyl]-9-propargylcarbazole (2), 9-(4-ethynylphenyl)-3-[(4-octylphenyl)ethynyl]carbazole (3), and 9-(4-ethynylphenyl)-3,6-bis[(4-octylphenyl)ethynyl]carbazole (4) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] and WCl₆-n-Bu₄Sn catalysts. The corresponding polyacetylenes with number-average molecular weights ranging from 9200 to 94?000 were obtained in 20-98% yields. The IR spectra of the polymers revealed that acetylene polymerization took place at the terminal ethynyl group, while the ethynylene group remained intact. The UV-vis absorption band edge wavelengths of W-based poly(3) and poly(4) were longer than those of the other polymers. W-Based poly(4) emitted fluorescence with the highest quantum yield (41%). Poly(1) exhibited excimer-based fluorescence in dilute solution.     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Ionic pseudopolyrotaxanes bearing a chromophore in the side chain - A spectroscopic study in water

The formation of pseudopolyrotaxanes based on a polyelectrolyte, a surfactant and α-cyclodextrin (α-CD) in aqueous solution is investigated. The polyelectrolyte and the surfactant form an ionic complex the side chains of which interact with each other. These interactions are strongly influenced by the formation of inclusion complexes with α-CD. It is shown by ¹H NMR and UV-vis spectroscopy that threading of the α-CD rings onto the side chains causes a shielding effect which increases the mobility of the side chains. The structure of the pseudopolyrotaxanes is concluded from ROESY spectra and their stoichiometry is determined by Job plots based on shift effects observed in the ¹H NMR spectra.     

Mechanistic study of electrochemical oxidation of o-dihydroxybenzenes in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of o-dihydroxybenzenes (1a and 1b) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-quinones derived from o-dihydroxybenzenes (1a and 1b) participate in 1,4-(michael) addition reactions with 3 to form the corresponding new o-dihydroxybenzene derivatives (6a and 6b). We propose a mechanism for the electrode process. The efficient electrochemical synthesis of 6a and 6b has been successfully performed at carbon rod electrodes in an undivided cell in good yield and purity. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

Photovoltaic performance of solid-state DSSCs sensitized with organic isophorone dyes: Effect of dye-loaded amount and dipole moment

Two isophorone sensitizers (S4 and D-3) were utilized in solid-state dye-sensitized solar cells (DSSCs) using spiro-OMeTAD as hole-transporting material. The dye-loaded amount of D-3 was almost 1.5 times as that of S4 which lead to higher light harvesting efficiency than S4. Moreover, the larger dipole moment along the direction for D-3 could cause more negative charges located close to the TiO₂ surface than that of S4, resulting in a larger conduction band (CB) upshift of TiO₂ for D-3 which was beneficial to an increase of V_oc. Promising results sensitized by D-3 in solid-state DSSCs were achieved with a short-circuit photocurrent density (J_sc) of 3.4 mA cm⁻², an open-circuit photovoltage (V_oc) of 760 mV, a fill factor (FF) of 0.71, and an overall efficiency (η) of 1.92% while ruthenium dye N3 produced a η of 2.55% under the same conditions (AM 1.5, 100 mW cm⁻²).     

Paired electrochemical synthesis of new organosulfone derivatives

Electrochemical oxidation of “cathodically generated 4-aminocatechol (2)” has been studied in the presence of 4-toluenesulfinic acid (4a) and benzenesulfinic acid (4b) as nucleophiles in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinone derived from 4-aminocatechol (2) participates in Michael addition reaction with 4a or 4b to form the corresponding new organosulfone derivatives (5a and 5b). In this work we have proposed a mechanism for the electrode process. A Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ redox mediator was used for the anodic oxidation of 4-aminocatechol (2) to the corresponding o-quinone 3. The indirect electrochemical process consists of a multi-step such as (a) cathodic reduction of 4-nitrocatechol (1) to 4-aminocatechol (2), (b) chemical oxidation of 4-aminocatechol (2) to 4-aminoquinone (3) with the resulting Fe(CN)₆³⁻, (c) the chemical reaction of 4-aminoquinone (3) with 4-toluenesulfinic acid (4a) or benzenesulfinic acid (4b), and (d) the anodic regeneration of Fe(CN)₆³⁻. The paired electrochemical synthesis of organosulfone derivatives (5a and 5b) has been successfully performed in an one-pot process at carbon rod electrode as a working and platinum as a counter electrode in an undivided cell.